Huawei CDMA C300

HUAWEI TECHNOLOGIES CO., LTD.

15.June 2006

HUAWEI CDMA C300

HUAWEI TECHNOLOGIES CO., LTD.

www.huawei.cwww.huawei.comom

Gajanan Shanbhag

HUAWEI TECHNOLOGIES CO., LTD.

AgendaAgenda

• Product Brief.• PST- Product support Tool.• Tracing tool-RT Manager.• Q &A.

HUAWEI TECHNOLOGIES CO., LTD.

ID Candy bar, Internal Antenna, Earphone

LCD: 65K CSTN,128*128 Pixel,1.5”

R-UIM and ROM-UIM

Multi-languages

Phonebook: 500 (3 numbers and 1 memo)

SMS: 60, SMS Group sending

Polyphonic ring tones

Calendar, Alarm, Calculator, Profiles, Embedded Games

Specification

CDMA1X 800MHz

Qualcomm MSM 6000

FLASH 64Mb ＋ RAM 16Mb

Battery ： 850mAhC300

Brief of C300

HUAWEI TECHNOLOGIES CO., LTD.

PST-Product Support ToolPST-Product Support Tool

• Uses of PST• Software download• Handset Parameter Configuration• PRL download

• HUAWEI PST• Download Tool: Used to Download the Binary• Operator Tool: Used to Configure the Handset and

Provisioning Parameters

HUAWEI TECHNOLOGIES CO., LTD.

TRACE toolTRACE tool

• Uses Of Trace tool• Log the Air-interface data.• Check the network parameters.• Trace the MO and MT call, SMS.• Analyse the call flow.• Sample Tools

• Commonly Used Tools• CAIT• QXDM• Agilent• TEMS• RT Manager

HUAWEI TECHNOLOGIES CO., LTD.

RT ManagerRT Manager

• Stands for Radio Test Manager.• Proprietary tool of Huawei.• Can be used for voice, data and SMS

testing.• Trace the time-stamp etc.

HUAWEI TECHNOLOGIES CO., LTD.

Setting-up RT ManagerSetting-up RT Manager

• Save the RT Manager file in PC.• Connect the HS to PC.• Check the port (Port 1 serial cable)• Open RTManager\Bin\RT Manager.ini Set the port and save the file. -----Above steps will be shown Later.

HUAWEI TECHNOLOGIES CO., LTD.

Port Setting Port Setting

• Open RT Manager.exe• File->Settings.• Set the Port and Logging

parameters.• Save the configurations.• Press F8 to start the

logging.

HUAWEI TECHNOLOGIES CO., LTD.

Log ViewerLog Viewer

Network Parameters

Handset Logs

HUAWEI TECHNOLOGIES CO., LTD.

Recording the LogsRecording the LogsTo collect the Logs

• View->Begin recording.• Stop the recording when finished.• Automatic pop-up will direct the

user to save the file in user specified location.

Note: Do not change the extension .mdb of the log file

To Open the saved Logs• Open RT Manager.exe• File Open the file Locate the

file.

HUAWEI TECHNOLOGIES CO., LTD.

Q&A

HUAWEI TECHNOLOGIES CO., LTD.

Thank You

www.huawei.com