HT Series ISO 16028 Flushface Interchange © 2013 DV Printed in the USA HTseries1P_5C Dixon Quick Coupling 2925 Chief Court • Dallas, NC 28034 • ph 877.963.4966 • fx 800.839.9022 dixonquickcoupling.com Product Options: NPTF, BSPP, ORB, JIC_BH, ORFS_BH Seal material options: Nitrile, FKM, EPDM, FFKM Body Size: ¼" - 2" Body Materials: Steel and 316 stainless steel Standards: ISO 16028 HTMA (Hand Tool Manufacturers Association - 3/8" only) Interchange: Parker FEM, Stucchi Series 'A' and FIRG Eaton/Aeroquip FD89, Hansen FF, CEJN X62/X65/X66, TEMA IF, Faster FFH/FFN/FFI/2FFN/2FFI Snap-Tite 74, Safeway FF49 Markets and Uses: Construction equipment (skid steers, front-end loaders, excavators) Hydraulic hand tools Oil platforms Mobile transport Petrochemical and pharmaceutical Features: Improved design with patented coupler valve system Compact profile - shorter overall length and reduced weight Easily rebuildable coupler and nipple No spill design minimizes spillage and air inclusion Heavy duty grooved sleeves - bulkhead mountable Minimum 1,000,000 impulse cycles both connected and disconnected * 10 times the ISO 16028 disconnected requirement Temperature range: -65°F to +212°F (-54°C to +100°C) with standard seals HT Series Improved sealing system incorporates a high performance molded polyurethane or O-ring energized PTFE valve seal. High strength stainless steel valve guide maximizes valve stability and minimizing flow restriction. Clear coupler flow path, maximizing laminar flow. Bulkhead mountable sleeve for breakaway, multi-plate, or blindmate installations. Reduced hex size DORS (dual opposing retention spheres) system prevents valve stem ejection during surge flow and pressure spike conditions. * valve stem is a known weakness on competitive designs