This document is posted to help you gain knowledge. Please leave a comment to let me know what you think about it! Share it to your friends and learn new things together.
General Information ...........................................................Construction Characteristics ..............................................Applications ........................................................................Selecting the Accumulator ..................................................Order Code ........................................................................
AccessoriesDP - Pre-Loading and Checking Set ..................................REDC - Electronic Control Unit ..........................................Fasteners ...........................................................................
GENERAL INFORMATIONOur products can be divided into two main groups: hydropneumatic accumulators and pulsation dampers of the standard type, with bladder, diaphragm or piston and special accumulators and pulsation dampers. The standard accumulators, manufactured in carbon steel or stainless steel with diaphragms ������������������ ��������������������������������������� �������������������� ���������chemical and petrochemical industries, dosing plants and water treatment plants. The special accumulators and pulsation dampers are destinated for the petrochemical industries, the food industry, the pharmaceutical industry a.s.o. and can be manufactured in a multitude of different materials: AISI 316L, Hastelloy, Titanio, Incolloy, carbon steel with PTFE internal lining, Ebanite, Kanigen and also various engineering plastic like PVC, Polipropilene, PVDF, PVC-C and PTFE with steel reinforced for high temperatures and/or pressures. The bladders, diaphragms and the guiderings and joints for the pistons, may be manufactured in NBR, IIR, CR, FKM, EPDM, ECO, HNBR, VMQ, NR, ACM, PTFE and in certain cases also in stainless steel AISI 316L. ����������������������������������������������������������������������
Description and operation
A hydropneumatic accumulator is a device that can store large amount of energy in little space in a process circuit.
Since liquids are virtually incompressible and therefore unsuitable for energy-storage, a compressible gas is used for this purpose. ��!�"���������#���� ������������$���������������������������������������������������� liquid side from the gas side. 2 - An inert gas (nitrogen) is pumped in through a valve at pressure P0 suitable for use in the ������ ��������%������������������������������������� ���������&0. �����"�������������� ��� ����������������������������������������������������������������������������������� ��� ������ � � � � � � � � ������������3 - When the pressure P1������� �� ����� �����������������'0 the diaphragm or bladder contracts, thereby compressing the gas and reducing the volume to V1. 4 - When the pressure is further increased to P2, the gas volume for the same reason will be reduced to V2�������������������� ����������� ��������������������
3 Accumulator shellDiaphragm or bladderAnti-extrusion discFluid connection port
Construction characteristics=����������������������������� ���������� �������������������������������������������������������!�����������������������������#�������$!������������
In the accumulators having a volume of 5 litres and more the disc in the bottom of the diaphragm ������ ��������������������������!����������������������������� ��� �����
The accumulator body is designed and produced according to european (PED), american (ASME) and russian (GOST), chinese (ML), australian (AS1210), algerian (ARH), tunisian standards.
�������������������� ������� ������������������������������ �� ������������������������������������ ���� black-out of the pump(s).
��������������������������������� �������������������� ������������������ ������������������������������������� ������ accumulator will compensate the volume preventing pressure increases in the circuit.
��������������������� the accumulator will absorb the pressure increase due to the waterhammer caused by the quick valves closing.
���������������� the accumulator must keep the pressure constant for applications which require static pressure for long periods.
����������������� mechanical shocks are absorbed by the accumulator.
����������������� in the processes where energy in the form of pressure must be transferred between two liquids non compatible between each other.
��!����������������������������� in the circuits where it is necessary to dampen the pressure oscillations caused by dosing pumps and, as a consequence, damping also the noise caused by the pulsations.
Pag. 7
HYDROPNEUMATIC ACCUMULATORS PULSATION DAMPENERS
HT 37 / C / 204 / 1113 / E
APPLICATIONS (continued) ��������"���������}���������� � �� ��������������������������������������� � � � � ������������������������������������������ ����������� � � � � �Installing a hydropneumatic accumulator allows to use smaller pumps and motors, reducing thus installation and operation costs.The operating cycle shown would require a pump having a capacity Q2. Using a hydropneumatic accumulator it is possible to store liquid during the periods (t1-t2) and (t3-t4) in which requirements are low or zero and to reutilize the stored liquid during (t0-t1) and (t2-t3) when the required ���������������������������� ��� �����1.The pump to be used must be selected to have the volumes V1+V2���&3+V4.There are many possible applications like machine tools, hydraulic presses, injection moulding and blow moulding machines etc.
Pressure loss compensationWhen a constant static pressure is required for a long period an accumulator is indispensable as it will compensate for pressure loss due to seepage throughjoints, seals etc. The accumulator will also absorb pressure peaks which may occur during the operating cycle.Tipical applications are presses, machine tools, central lubrication systems, loading platforms etc.
��������������Mechanical shocks in hydraulic driven equipment can be easily absorbed by accumulators.Possible applications are in drive and suspension systems for fork-lifts, mobile cranes, agricultural and civil engineering machinery etc.
tt1t0 t2 t3 t4
Q1
Q2
F
low
rate
V1
V3
V2
V4
V1 + V2 “ V 3 + V4
Cycle
Pag. 8
HYDROPNEUMATIC ACCUMULATORS PULSATION DAMPENERS
HT 37 / C / 204 / 1113 / E
APPLICATIONS (continued)
#�����������������������In the case of a sudden power loss e.g.energy blackout or pump breakdown etc.���� ��������� ������������� ���energy to complete the operational cycle,and thus prevent damages to equipmentand/or product. In addition the availabilityof an emergency power supply is essentialin those cases where the hydraulic poweris needed for closing a safety door, anelectrical switch an emergency brake etc.*�����������������������which must remain under pressure in caseof pump breakdown.
!����������������"��������������������Sudden valve closing can cause pressurepeaks (waterhammer) resulting inoverpressurisation of pipes, joints and valves.The use of a suitable accumulator can�������<��������� ��������� ����� ��#�����������������$�Typical applications are: earth movingequipment, agricultural machines,pipelines for oil and water, car wash equipment etc.
Pulsation damperAs a consequence of their design pistonand diaphragm pumps create pulsationsand pressure peaks in the circuits duringoperation.This fact reduces lifetime of the pump������ ����������������� ��� �functionning of the systems.Fitting a pulsation damper of diaphragm orbladder type on the pressure line of thepump, and as close as possible to it, willlower the pulsations to an acceptable level,also according to the volume of the damper. Typical applications are piston pumps,metering pumps, peristaltic and airoperated pumps.
Hc
P = yHc
Q
t
Q
t
Without damper
With damper
Pag. 9
HYDROPNEUMATIC ACCUMULATORS PULSATION DAMPENERS
HT 37 / C / 204 / 1113 / E
SELECTING the ACCUMULATOR Selecting the accumulator implies calculating its minimum volume (V0$�������������������� ���use. The most common/frequent industrial applications are the following: A)������������������ � � � � � � � � � � �B)��#�������������������������������� � � � � � � �C)������������������������� � � � � � � � � �D) Pulse dampener E) Volume compensator
*���������������������������������������������������� �� ������������� ������� ���������order to obtain the parameter required to select the accumulator.
}����������� ����������� ���������������������� �� ������������ �� �������������������������a preset interval of time (that must generally be long enough to allow the isothermal process to occur), while preventing pressure from falling below a set value.
Input
�!�+&������������������������ ������������������������� �� ����#����$�� � � - P0 pre-charge pressure (absolute bar) - P1 minimum pressure that can be reached in the circuit (absolute bar) - P2��������������������� ������� ��������� �� ����#����������$
Output
- V0 volume required by the accumulator (litres)
Example
"�������������_�������������������������� ���������������������������;�_�����������������������������������*������������ ������;��� �3/minute, must be compensated by an accumulator with a pre-charge pressure of 310 bar, so that the circuit pressure does not fall below 345 bar.
This application typically occurs when a liquid is slowly accumulated and immediately released into the circuit when a request from the plant is received. In this application, the liquid volume variations occur in two different ways: accumulation occurs through an isothermal transformation while the release occurs by means of an adiabatic transformation.
Input
!�+&adiab overall volume that the accumulator must supply to the circuit (litres) - P0 pre-charge pressure (absolute bar) - P1 minimum pressure that can be reached in the circuit (absolute bar) - P2������������������������ ������� ��������� �� ����#����������$���� � � ��!������������������������������� ���������������#�;��^���������������� ��������������$
Output
V0 volume required by the accumulator (litres)
Example
An accumulator with a pre-charge pressure of 198 bar receives from the circuit a sudden request ����^�������������������� �� ���������������������������_����������_�����
����<�������������=���������“Water hammering” is a typical phenomenon of hydraulic circuits, which leads to the ‘instant’ ���������������������� ���������������������������������������������������������rate. In this case the accumulator must absorb the sudden pressure variation of the plant. *������� ������������� �������������������������������������
Input
!������� ���������������������� ����������������#���$� � � � � � � - d pipe diameter (mm) - Q pipe capacity (m3/sec.) �!������� �������������#��?�3) - t time required for the liquid rate variation (sec) - P0 pre-charge pressure (absolute bar) - P1 minimum pressure of the circuit (absolute bar) - P2��� ������������������ ������� ��������� �� ����#����������$�� � ��!������ ��������������������� ���������������#�;��^���������������� ��������������$
Output
- V0 volume required by the accumulator (litres)
>��� ����������������������������?0������������*
H c
P = y H cWithout accumulator With accumulator
P 0P 1
_
V0 = 1k P 0
P 2
1k
t
2Q . · 103_ 4 · ρ · L · Q
л · d2 · · 105P2- P1
Pag. 12
HYDROPNEUMATIC ACCUMULATORS PULSATION DAMPENERS
HT 37 / C / 204 / 1113 / E
SELECTING the ACCUMULATOR (continued)
����<�������������=��������� (continued)
Example
An accumulator with a pre-charge pressure of 5.85 bar is used to absorb the “water hammering” ����� �� ���������������������__�����������������������? �������������������_�������������with a density of 1 kg/dm3������������������ ������ �� �����������������������������1 second. The operating pressure of the circuit is P1�;���������������������������������������� �������'2�;��_�����
J���!������������}������ ������� �����������������������<���� � �� ������������������� ��������within the hydraulic circuit, which originate from the use of the piston pump. }������������������������ ������������� ����������� ������������ �����������������hydraulic piston pump.
Input
- Q pump capacity (litres/minute) - n number of revolutions of the pump (revolutions/minute) - P operating pressure (bar) �!���� ����������������#��$� � � � � � � � � ��!���� ��������������������� ���������������#�;��^���������������� ��������������$� ��!���� ���� ��� ��� ������������#���������������$�� � � � � � - m typical parameter of pump (see following table)
Output
- V0 volume required by the accumulator (litres) - P1 minimum pressure of the circuit (bar) - P2�� ������������������� �� ����#���$
1 pis ton / s ingle ac tion 1 pis ton / double ac tion2 pis tons / s ingle ac tion 2 pis tons / double ac tion 3 pis tons / s ingle ac tion 3 pis tons / double ac tion 4 pis tons / s ingle ac tion 4 pis tons / double ac tion 5 pis tons / s ingle ac tion 5 pis tons / double ac tion 6 pis tons / double ac tion7 pis tons / double ac tion
>�������� ��#��������������$��<������������������������������������������� ������������following table, to multiply with the cubic capacity of one pison of the pump, in order to obtain ���������������<����������������������� �������������������������`�������������������������� �������������� ���������������������������������������
#���?����������������In this application, the accumulator is used when the temperature variations to which the liquid ���# �� �������������� �$��������������������������������� �������������������set limits. This condition is ensured by the accumulator, which transforms the pressure variations ����������������������*����������������������� ������� ����������������������� �can be considered isothermal.
Input
!�+&�� ���������������������� ������ ����������������#����$�� � � � � - P0 pre-charge pressure (absolute bar) - P1 minimum pressure that can be reached in the loop (absolute bar) - P2�� ������������������ ������� ��������� �� ����#����������$
Output
- V0 volume required by the accumulator (litres)
Example
A steel reservoir of a circuit containing oil has a diameter of 200 (mm) and a height of 300 (mm). *������������������'�;���������������� ������������������������������ ��� ����������������������� ����������!��`z������_�`z������������������������������������������������������This result can be achieved by using a pressure accumulator witha pre-charge pressure of 13.5 bar.
8������������������The sections that follow provide the theoretical/practical information required for a correct use of accumulators. The terms used are the following:
Thermodynamic transformations along the plane (Pressure, Volume) are represented by means of the following equation:
A thermodynamic transformation is called isothermal if, during the transition from one condition (P1, V1) to another (P2, V2), the temperature T of the liquid remains constant. This means that the ������������������������� ����������������������������*��� ��������������� ������dilatations/compressions that occur slowly in non thermally insulated vessels.
"�������������#'��&$�� ��� �������;�����������������������������������������������the following formula:
A thermodynamic transformation is called adiabatic if, during the transition from one condition (P1, V1) to another (P2, V2$����������������� ���������������������������
}�������������������� ���������������������������������� �����������������environment, which results in a temperature variation. This condition is typical of dilations/compressions that occur very swiftly or in thermally insulated vessels.
"�������������#'��&$� ��� �������;���;�z��?�z������������������� transformation is represented by the following formula:
�����z��������� �� �������� �����������������z��������� �� �������� �������volume. For nitrogen and air,���%�'*[*
P . Vn = C onstant
P1 · V1 = P2 · V2 = C onstant
P1 · V1k = P2 · V2
k = C onstant
Pag. 18
HYDROPNEUMATIC ACCUMULATORS PULSATION DAMPENERS
HT 37 / C / 204 / 1113 / E
SELECTING the ACCUMULATOR (continued) !��������� The pre-charge (P0) of an accumulator is generally calculated with the following formula:
It is generally advisable to verify that the pre-charge is within the following limits: ����������������������������������������������������_������'2���'0���_�����'1. If the accumulator is used as pulse dampener, the pre-charge is calculated with the two following formulas:1) If the average operating pressure is known: P0�;�_�����_������'m
2) If the minimum operating pressure is known: P0�;�_�����'1
If the accumulator is used as \"������������\ absorber, the pre-charge is calculated with the following formula:
P0�;�_�����_�����'�
*�����������������������������������������������#*2$��� ����������� ����������However, as the pre-charge is carried out and generally checked at ambient temp. (TC;�_`z$���the value to measure and/or check (P0C) is the following:
SELECTING the ACCUMULATOR (continued) `b���������������������������������������� �������������������������������� ������������������� ������������� ����������������account even volume V0�������� �� ���������}��*��#`z$������������������������������������T2�#`z$�������������������������������� ���������&0T���� �������������������� ���be calculated with the following formula:
where V0 is the volume calculated as per steps A)-B)-C)-D)-E).
WELDED TYPES WA Type #������������"����������������������j������������������k�����������
Technical data=��������������� �����_�!���_��������������#������������$���������_�����������������������"���������������������"�_�_������������?���%���"��������������^?�=������������������� !^_`z�?����_`z� (compatible with the temperatures admitted for the diaphragms)Mounting: any position
Standard construction characteristicsMaterial of body: carbon steel stainless steel AISI 316L� � � � ���������>�������������� � � " ����������������� ��� ������������ |���������������Painting: anti-rust primer (only carbon steel)Test: on request
STANDARD TYPES��$��������q��^j^]v���^j^v^ 8�����������"�����k���������������������������������
Technical data=��������������� �������_��������������#������������$���������_�����������������������"����������������������������?�=������������������� !^_`z�?����_`z� (Compatible with the temperatures admitted for the diaphragms)Mounting: any position
Standard construction characteristicsMaterial of body: carbon steel������������ � � � ��������������Gas connection valve: 5/8”UNF version 1Painting: anti-rust primerTest: on request
18,5
0
Ø D
E
A
12
1
2
Ø 20,50
Weightkg
Type Volume*cm3
Pressuremax bar
P.F.C.E
G a s valve A Ø B C Ø D
L 0.025L 0.05
2550
1/4” GAS1/4” GAS
5/8” UNF5/8” UNF
105105
--
--
6565
1,21,4
P lu g mm210210
Dimensions
* Nominal volume
Spare parts code
1 2Type Diaphragm
L 0.025L 0.05* According to fluid
MEML005*MEML005*
Gas valve
VALPRE580NV2VALPRE580NV2
Gasket kit
--
Pag. 25
HYDROPNEUMATIC ACCUMULATORS PULSATION DAMPENERS
HT 37 / C / 204 / 1113 / E
STANDARD TYPES��$��������q��^j^]v�|�^jzv 8�����������"�����k����������������������j������������������k�����������
Technical data=��������������� �������_�!���_�!���_��������������#������������$���������_�����������������������"����������������������������?�=������������������� !^_`z�?����_`z� (Compatible with the temperatures admitted for the diaphragms)Mounting: any position
Standard construction characteristicsMaterial of body: carbon steel stainless steel AISI 316L ����������������������������������������������������>�������������� � � � ��������������Gas connection valve: 5/8”UNF version 1Painting: anti-rust primer (only carbon steel)Test: on request
20
Ø 20.5Ø D
EØ B
A
2
C
1
* Nominal volume
210210
Weightkg
Type Volume*cm3
Pressuremax bar
P.F.C.E
Gas valve A Ø B C Ø D
L 0.025L 0.05L 0.1L 0.35
2550
100350
1/2” GAS1/2” GAS1/2” NPT1/2” NPT
--
M18x1,5M18x1,5
Plug � 5/8” UNFPlug � 5/8” UNF
M28x1,5 � 5/8” UNFM28x1,5 � 5/8” UNF
105105128157
--
7394
--
3640
656577
99,5
1,21,21,92,9
150150150150
Stainlesssteel
Carbonsteel
Duplexsteel
--
210210
Dimensions
Plug mm210/250210/250210/250210/250
Stainless-Duplexsteel
Carbonsteel
VALPRE5 80NV2 - VALPRE5 8 X VALPRE5 80NV2 - VALPRE5 8 X
Gas valve
Spare parts code
1 2Type Diaphragm
L 0.1L 0.35* According to fluid
M EML01*M EML035*NV1
Pag. 26
HYDROPNEUMATIC ACCUMULATORS PULSATION DAMPENERS
HT 37 / C / 204 / 1113 / E
STANDARD TYPES�8�$��������q��^j}v�|�v 8�����������"�����k���������������������j������������������k�����������
Technical data=��������������� ������^��?���_�?���_��������������#������������$���������_�����������������������"����������������������������?�=������������������� !^_`z�?����_`z� (Compatible with the temperatures admitted for the bladder)Mounting: horizontal or vertical with gas valve upwards
Standard construction characteristicsMaterial of body: carbon steel (Fig. I) stainless steel AISI 316L (Fig. II) ����������������������������������������������������>���#>����}}$Y�������� � � � ��������������Gas connection valve: 5/8”UNF version 1Painting: anti-rust primer (only carbon steel)Test: on request
STANDARD TYPES�8�$��������q��'^���'] 8�����������"�����k���������������������j������������������k�����������
Technical data=��������������� ������^��?���_�?���_��������������#������������$���������_�����������������������"����������������������������?�=������������������ !^_`z�?����_`z� (Compatible with the temperatures admitted for the bladder)Mounting: horizontal or vertical with gas valve upwards
Standard construction characteristicsMaterial of body: carbon steel stainless steel AISI 316L � � � � ���������>��Y�������� � � � ��������������Gas connection valve: 5/8”UNF version 1Painting: anti-rust primer (only carbon steel)Test: on request
C
1
2
A
Ø B
Ø D
E
Weightkg
Stainlesssteel
Carbonsteel
Duplexsteel
Type Volume*cm3
Pressuremax bar
P.F.C.E
Gas valve A Ø B C Ø D
LA 10LA 12
1000012000
145145
250250
270270
1” 1/4 GAS1” 1/4 GAS
5/8” UNF5/8” UNF
740840
9090
5050
168.5168.5
mm28,532,5
Dimensions
* Nominal volume
G ask et k i t
PAR168PTFEPAR168PTFE
1 2Type Bladder
LA 10LA 12
MEMLA10*MEMLA10*
G as valve
VALPRE580NV2 - VALPRE58XVALPRE580NV2 - VALPRE58X
* According to the fluid
Spare parts code
Pag. 28
HYDROPNEUMATIC ACCUMULATORS PULSATION DAMPENERS
HT 37 / C / 204 / 1113 / E
STANDARD TYPES�8��$��������q��^j}v�|�v 8�����������"�����k��������������������������������
Technical data=��������������� �������_��������������#������������$���������_�����������������������"����������������������������?�=������������������� !^_`z�?����_`z� (Compatible with the temperatures admitted for the bladder)Mounting: horizontal or vertical with gas valve upwards
Standard construction characteristicsMaterial of body: carbon steel Y�������� � � � ��������������Gas connection valve: 5/8”UNF version 1Painting: anti-rust primer Test: on request
STANDARD TYPES�8��$��������q��'^���']8�����������"�����k��������������������������������
Technical data=��������������� �������_��������������#������������$���������_�����������������������"����������������������������?�=������������������ !^_`z�?����_`z� (Compatible with the temperatures admitted for the bladder)Mounting: horizontal or vertical with gas valve upwards
Standard construction characteristicsMaterial of body: carbon steel Y�������� � � � ��������������Gas connection valve: 5/8”UNF version 1Painting: anti-rust primer Test: on request
C
1
2
A
Ø B
Ø DE
Weightkg
Type Volume*cm3
Pressuremax bar
P.F.C.E
Gas valve A Ø B C Ø D
LAS 10LAS 12
1000012000
350350
1” 1/4 GAS1” 1/4 GAS
5/8” UNF5/8” UNF
740840
9090
5050
168,5168,5
28,532,5
mm
Dimensions
* Nominal volume
Gasket kit
PAR168PTFEPAR168PTFE
1 2Type Bladder
LAS 10LAS 12
MEMLA10*MEMLA10*
Gas valve
VALPRE580NV2VALPRE580NV2
Spare parts code
* According to fluid
Pag. 30
HYDROPNEUMATIC ACCUMULATORS PULSATION DAMPENERS
HT 37 / C / 204 / 1113 / E
STANDARD TYPES�8���$��������q��^}v�|�v 8�����������"�����k��������������������������������
Technical data=��������������� ������__��������������#������������$���������_�����������������������"����������������������������?�=������������������� !^_`z�?����_`z� (Compatible with the temperatures admitted for the bladder)Mounting: horizontal or vertical with gas valve upwards
Standard construction characteristicsMaterial of body: carbon steel Y�������� � � � ��������������Gas connection valve: 5/8”UNF version 1Painting: anti-rust primer Test: on request
STANDARD TYPES�8?�$��������q��^j^]v���^j^v^ 8�����������"�����k���������������������������������
Technical data=��������������� �������_��������������#������������$���������_�����������������������"����������������������������?�=������������������� !^_`z�?����_`z� (Compatible with the temperatures admitted for the diaphragm)Mounting: any position
Standard construction characteristicsMaterial of body: carbon steel ������������ � � � ��������������Gas connection valve: 5/8”UNF version 1Painting: anti-rust primer Test: on request
18,50
Ø D
E
A
12
1
2
Ø 20,50
Weightkg
Type Volume*cm3
Pressuremax bar
P.F.C.E
Gas valve A Ø B C Ø D
LAV 0.025LAV 0.05
2550
330330
1/4” GAS1/4” GAS
5/8” UNF5/8” UNF
105105
--
--
6565
1,21,4
Plug mm
Dimensions
* Nominal volume
Gasket kit
--
1 2Type Diaphragm
LAV 0.025LAV 0.05
MEML005*MEML005*
Gas valve
VALPRE580NV2VALPRE580NV2
Spare parts code
* According to fluid
Pag. 32
HYDROPNEUMATIC ACCUMULATORS PULSATION DAMPENERS
HT 37 / C / 204 / 1113 / E
STANDARD TYPES�8?�$��������q��^j'���^jzv8�����������"�����k����������������������������������
Technical data=��������������� �������_��������������#������������$���������_�����������������������"����������������������������?�=������������������� !^_`z�?����_`z� (Compatible with the temperatures admitted for the diaphragm)Mounting: any position
Standard construction characteristicsMaterial of body: carbon steel ������������ � � � ��������������Gas connection valve: 5/8”UNF version 1Painting: anti-rust primer Test: on request
20
Ø 20.5Ø D
EØ B
A
2
C
1
210210
Weightkg
Type Volume*cm3
Pressuremax bar
P.F.C.E
Gas valve A Ø B C Ø D
LAV 0.1LAV 0.35
100350
330330
M18x1,5M18x1,5
M28x1,5 � 5/8” UNFM28x1,5 � 5/8” UNF
128157
7394
3640
7799,5
1,92,9
Plug mm
Dimensions
* Nominal volume
Gasket kit
--
1 2Type Diaphragm
LAV 0.1LAV 0.35
MEML01*MEML035*NV1
Gas valve
VALPRE580NV2VALPRE580NV2
Spare parts code
* According to fluid
Pag. 33
HYDROPNEUMATIC ACCUMULATORS PULSATION DAMPENERS
HT 37 / C / 204 / 1113 / E
Ø 20.5Ø D
EØ B
20
A
2
1
3
C
STANDARD TYPES�8?�$��������q��^jv^���^j}v 8�����������"�����k����������������������j������������������k�����������
Technical data=��������������� �������_�!���_�!���_��������������#������������$���������_����������������������"����������������������������?�=������������������� !^_`z�?����_`z� (Compatible with the temperatures admitted for the diaphragm)Mounting: any position
Standard construction characteristicsMaterial of body: carbon steel stainless steel AISI 316L ����������������������������������������������������>���� � ������������� � � � ��������������Gas connection valve: 5/8”UNF version 1Painting: anti-rust primer (only cabon steel)Test: on request
Weightkg
Type Volume*cm3
Pressuremax bar
P.F.C.E
Gas valve A Ø B C Ø D
LAV 0.5LAV 0.75
500750
M28x1,5 � 5/8” UNFM28x1,5 � 5/8” UNF
172226
94115,5
4041
116137
4,16,1
Plug mm1/2” NPT3/4” NPT
M18x1,5M18x1,5
150150
210210
210/250210/250
Stainlesssteel
Carbonsteel
Duplexsteel
Stainless-Duplexsteel
Carbonsteel
* Nominal volume
Dimensions
Gasket kit
ANEMEM05 - ANETEN05ANEMEM075 - OR4450*
1 2 3Type Diaphragm
LAV 0.5LAV 0.75
MEMLAV05*NV1MEMLAV075*
Gas valve
VALPRE58XVALPRE58X
VALPRE580NV2VALPRE580NV2
Stainless-Duplexsteel
Carbonsteel
Spare parts code
* According to fluid
Pag. 34
HYDROPNEUMATIC ACCUMULATORS PULSATION DAMPENERS
HT 37 / C / 204 / 1113 / E
STANDARD TYPES�8?�$��������q��'jv���]jv8�����������"�����k����������������������j������������������k�����������
Technical data=��������������� �������_�?���_�?���_��������������#������������$���������_�����������������������"����������������������������?�=������������������� !^_`z�?����_`z� (Compatible with the temperatures admitted for the diaphragm)Mounting: any position
Standard construction characteristicsMaterial of body: carbon steel stainless steel AISI 316L ����������������������������������������������������>���� � ������������� � � � ��������������Gas connection valve: 5/8”UNF version 1Painting: anti-rust primer (only carbon steel)Test: on request
STANDARD TYPES8~!�$��������q��^jv8�����������"�����k���������������������������������
Technical data=��������������� �������_��������������#������������$���������_�����������������������"����������������������������?�=������������������� !^_`z�?����_`z� (Compatible with the temperatures admitted for the diaphragm)Mounting: any position
Standard construction characteristicsMaterial of body: carbon steel ������������ � � � ��������������Gas connection valve: 5/8”UNF version 1Painting: anti-rust primer Test: on request
STANDARD TYPES;!��$��������q��'jv�|�{jv 8�����������"�����k������������������������������������
Technical data=��������������� ������_��������������#������������$���������_�����������������������"����������������������������?�=������������������� !^_`z�?����_`z� (Compatible with the temperatures admitted for the diaphragm)Mounting: horizontal or vertical with gas valve upwards
Standard construction characteristicsMaterial of body: stainless steel AISI 316L ������������ � � � ��������������Gas connection valve: 5/8”UNF version 1Test: on request
Weightkg
Type Volume*cm3
Pressuremax bar
P.F.C.E
Gas valve A Ø B C Ø D
BPL 1.5BPL 3BPL 5BPL 8.5
1500300050008000
30 303030
1” GAS1” GAS
1” 1/2 GAS2” GAS
5/8” UNF5/8” UNF5/8” UNF5/8” UNF
240272358450
132177177202
46607070
180230230270
6,359,3
11,0517,4
mm
Dimensions
* Nominal volume
1 2 3Type Diaphragm
BPL 1.5BPL 3BPL 5BPL 8.5
MEMBPL1.5*MEMBPL3*MEMBPL5*
MEMBPL85*
Gas valve
VALPRE58XVALPRE58XVALPRE58XVALPRE58X
Gasket kit
OR3550*OR3750*OR3750*OR3850*
Spare parts code
* According to fluid
Ø 20.5Ø D
A
Ø BEC
2
1
3
20
Pag. 37
HYDROPNEUMATIC ACCUMULATORS PULSATION DAMPENERS
HT 37 / C / 204 / 1113 / E
STANDARD TYPES;!��$��������q��'^���'] 8�����������"�����k������������������������������������
Technical data=��������������� ������_��������������#������������$���������_�����������������������"����������������������������?�=������������������� !^_`z�?����_`z� (Compatible with the temperatures admitted for the diaphragm)Mounting: horizontal or vertical with gas valve upwards
Standard construction characteristicsMaterial of body: stainless steel AISI 316L ������������ � � � ��������������Gas connection valve: 5/8”UNF version 1Test: on request
Weightkg
Type Volume*cm3
Pressuremax bar
P.F.C.E
Gas valve A Ø B C Ø D
BPL 10BPL 12
1000012000
3030
2” GAS2” GAS
5/8” UNF5/8” UNF
753853
167167
7070
200200
26,9529,95
mm
Dimensions
* Nominal volume
1 2 3Type Diaphragm
BPL 10BPL 12
MEMLAV10*MEMLAV10*
Gas valve
VALPRE58XVALPRE58X
Gasket kit
OR6600*OR6600*
Spare parts code
* According to fluid
Ø 20.5Ø D
A
Ø BEC
2
1
3
20
Pag. 38
HYDROPNEUMATIC ACCUMULATORS PULSATION DAMPENERS
HT 37 / C / 204 / 1113 / E
STANDARD TYPES�`�$��������q��^j]�|�vv 8�����������"�����k��������������������������������
Technical data=��������������� �������_��������������#������������$���������_����������������������"���������������������������^?�=������������������ !^_`z�?����_`z� (Compatible with the temperatures admitted for the bladder)Mounting: horizontal or vertical with gas valve upwards
Standard construction characteristicsMaterial of body: carbon steel Y�������� � � � ��������������Gas connection valve: 5/8”UNF version 1Painting: anti-rust primer Test: on request
STANDARD TYPES�`�$��������q��'^�|�vv8�����������"�����k���������������������������������k�����������
Technical data=��������������� ������^��!���_��������������#������������$���������_����������������������"���������������������������^?�=������������������ !^_`z�?����_`z� (Compatible with the temperatures admitted for the bladder)Mounting: horizontal or vertical with gas valve upwards
Standard construction characteristicsMaterial of body: stainless steel AISI 316L ����������������������������������������������������>���Y�������� � � � ��������������Gas connection valve: 5/8”UNF version 1Painting: anti-rust primer Test: on request
STANDARD TYPES���$��������q��'jv�|�vv8�����������"�����k���������������������������������������������������
Technical data=��������������� ��������40 / 30 � 70 bar����������#������������$���������_����������������������"���������������������������^?�=������������������ �!^_`z�?����_`z� (Compatible with the temperatures admitted for the bladder)Mounting: horizontal or vertical with gas valve upwards
Standard construction characteristicsMaterial of body: carbon steel stainless steel AISI 316L Y�������� � � � ��������������Gas connection valve: 5/8”UNF version 1Painting: anti-rust primer (only carbon steel)Test: on request
STANDARD TYPESSPM Type !�����������������������"�������������k��������������������������������������������������
Technical data=��������������� �������_�?���_��������������#������������$���������_�����������������������=������������������� !^_`z�?����_`z�#z��������������������������������� for the bladder)Mounting: in line
Standard construction characteristicsMaterial of body: carbon steel stainless steel AISI 316LY�������� � � � ��������������Gas connection valve: 5/8”UNF version 1Painting: anti-rust primer (only carbon steel)Test: on request
Weightkg
Type Volume*cm3
Pressuremax bar
Max flowratelit/min
Nitrogen pressuremax bar
SPM 10SPM 15SPM 25SPM 40
80400
10001500
250250250250
330330330330
40150150200
150150150150
1/2” G1” G1” G
1” 1/2 G
5,57
2027
75108108108
-252402602
224224374522
gas mm
Stainless steel Carbon steelDimensions
* Nominal volume
Ø 20,5
20
ØD
L1L2
E
Pag. 42
HYDROPNEUMATIC ACCUMULATORS PULSATION DAMPENERS
HT 37 / C / 204 / 1113 / E
SPECIAL TYPES8!$�$��������q��^j'�|�v�Pulsation damper "�����k���������!$�#����������������������������
Technical data=��������������� �����_�����¡����������#������������$���������_����������������������"����������������������������_?�=������������������� !�_`z�?���^_`z�Mounting: horizontal or vertical with gas valve upwards
Standard construction characteristicsMaterial of body: stainless steel AISI 316LDiaphragm: PTFEGas connection valve: 5/8”UNF version 1Test: on request"����������������'���������¡��_�?��__�?���_�?��__�?��__�?�^__����
SPECIAL TYPES8!$�$��������q��^j'�|�v�Pulsation damper "�����k���������!$�#���������������������������������������
Technical data=��������������� �����_���������������#������������$���������_����������������������"����������������������������_?�=������������������� '&z�!�_`z�?���_`z��������������������������������������������''�!�'&�>�!�'&z�z��!�_`z�?��^_`z�Mounting: horizontal or vertical with gas valve upwards
Standard construction characteristicsMaterial of body: stainless steel AISI 316L+ plasticDiaphragm: PTFEGas connection valve: 5/8”UNF version 1Test: on request
SPECIAL TYPES8!$�$��������q��^j'�|�v !���������������"�����k���������!$�#�����������������������b���������������������������������
Technical data=��������������� �����_���������������#������������$���������_����������������������"����������������������������_?�=������������������� '*>\�!�_`z�?��^_`z�Mounting: horizontal or vertical with gas valve upwards
Standard construction characteristicsMaterial of body: stainless steel AISI 316L + PTFEDiaphragm: PTFEGas connection valve: 5/8”UNF version 1Test: on request
>��� �All options can be applied also to the same damper
Pag. 46
HYDROPNEUMATIC ACCUMULATORS PULSATION DAMPENERS
HT 37 / C / 204 / 1113 / E
SPECIAL TYPES8!$J�$��������q��z�|�']$����������������������"�����"���k���������!$�#����������������������������
Technical data=��������������� �����_�����¡����������#������������$���������_����������������������"����������������������������_?�=������������������� !�_`z�?���^_`z�Mounting: in line
Standard construction characteristicsMaterial of body: stainless steel AISI 316LDiaphragm: PTFEGas connection valve: 5/8”UNF version 1Test: on request"����������������'���������¡��_�?��__�?���_�?��__�?��__�?�^__����
A
Ø D
E
Ø B
5/8” UNF
1
32
Type Volume*cm3
Pressuremax bar
P.F.C.E
Gas valve A Ø B Ø D
A PTD3A PTD5A PTD7.5A PTD10A PTD12
300050007500
1000012000
3030303030
1” GAS1” 1/2 GAS
2” GAS2” GAS2” GAS
5/8” UNF5/8” UNF5/8” UNF5/8” UNF5/8” UNF
310430440520620
1 7717 720 220 220 2
23030 030 030 030 0
mm
** Dimensions
* Nominal volume ** Other volumes between 0,1 and 12 litres available on request
SPECIAL TYPESAPTL Type !���������������"�����������������������������������������������������������������������������
Technical data=��������������� ������_�?��__���������_`z����������#������������$���������_����������������������"����������������������������_?�=������������������� !�_`z�?���^_`z�Mounting: horizontal or vertical with gas valve upwards
Standard construction characteristicsBody material: stainless steel AISI 316LOn request body material: PTFE coated carbon steel,� � � � ���������>����]������� Inconel etc.Reinforcement rings: stainless steel AISI 316LScrews and nuts: stainless steel AISI 316LDiaphragm: PTFE or rubber (NBR, FKM, EPDM)����������������� � �?���¢J>��������Test: on request
8������ ������������������������������
ASM Type !���������������"���������������"�����������������������������������
Technical data����������#������������$���� ������������������� pressure and temperature=������������������� !��_`z�?���__`z�Mounting: horizontal or vertical with gas valve upwards
Standard construction characteristicsBody material: carbon steel stainless steel AISI 316LBellows material: stainless steel AISI 316LGas connection valve: 5/8” UNF version 1Painting: anti-rust primer (only carbon steel)Test: on request
8������ ������������������������������
Ø 20.5
Pag. 49
HYDROPNEUMATIC ACCUMULATORS PULSATION DAMPENERS
HT 37 / C / 204 / 1113 / E
SPECIAL TYPESASP Type !���������������"����!$�#������"�����������������������������������
Technical data=��������������� ���������������������#������������$���� ������������������� pressure and temperature=������������������� !�_`z�?���^_`z�Mounting: horizontal or vertical with gas valve upwards
Standard construction characteristicsBody material: carbon steel stainless steel AISI 316LBellows material: PTFEGas connection valve: 5/8” UNF version 1Painting: anti-rust primer (only carbon steel)Test: on request
8������ ������������������
LS Type ����!��������!��������������"�����k����������������������������j������������������k�����������
Technical data=��������������� �������___��������������#������������$���������_����������������������"����������������������������?�=������������������� !^_`z�?����_`z�# ����������������� temperature admitted for the diaphragm)Mounting: horizontal or vertical with gas valve upwards
Standard construction characteristicsBody material: carbon steel stainless steel AISI 316L����������������������������������������������������>����������������� ���� � ��������������Gas connection valve: 5/8” UNF version 1Test: on requestPainting: anti-rust primer (carbon steel only)
SPECIAL TYPESLAVS Type ����!��������!��������������"�����k������������������������������������������������������������������������������������������������������������������������j������������������k�����������
Technical data=��������������� �������___��������������#������������$���������_����������������������"����������������������������?�=������������������� !^_`z�?����_`z�Mounting: horizontal or vertical with gas valve upwards
Standard construction characteristicsBody material: carbon steel stainless steel AISI 316L����������������������������������������������������>����������������� ������������ ������������������ �Gas connection valve: 5/8” UNF version 1Painting: anti-rust primer (only carbon steel)Test: on request
LASSX Type ����!��������!���������������"�����k���������������������������j������������������k�����������
Technical data=��������������� �������___��������������#������������$���������_����������������������"����������������������������?�=������������������� !^_`z�?����_`z�Mounting: horizontal or vertical with gas valve upwards
Standard construction characteristicsBody material: carbon steel stainless steel AISI 316L����������������������������������������������������>��Y����������� ���� ������������ ��������������Gas connection valve: 5/8” UNF version 1Painting: anti-rust primer (carbon steel only)Test: on request
SPECIAL TYPES;8�$��������q��'^^�|��vv^^8�����������"�����k���������������������������������������������������������������������������������������������������������������������������������������������
Technical data=��������������� ������_�?��_��������������#������������$���������_����������������������"����������������������������?�=������������������� !^_`z�?����_`z� (Compatible with the temperatures admitted for the bladder)Mounting: horizontal or vertical with gas valve upwards
Standard construction characteristicsBody material: carbon steel stainless steel AISI 316LY���������� ������������ � ������������������ �Gas connection valve: 5/8” UNF version 1Painting: anti-rust primer (carbon steel only)Test: on request
B
A
Stainless steel Carbon steelWeight
kgType Volume*
ltPressuremax bar
P.F.C.E
Gas valve A Ø B
BA 100BA 150BA 200BA 300BA 500BA 600BA 5000BA 5500
SPECIAL TYPES;8J�$��������q��^zv�|�'^^>��"�����������������������������������������������������������������������������������������������������������������������k�����������
Standard construction characteristicsBody material: stainless steel AISI 316L����������������������������������������������������>������ �Gas connection valve: 5/8” UNF version 1
������������ - PED - EN 13445 - ASME VIII Div.1 - AD 2000- ASME VIII Div.1 “U” Stamp - National Board- GOST- SELO
Technical data=��������������� ������_��������������#������������$���������_����������������������"���������������������������^?�=������������������� '&z��!�_`z�?���_`z� � � � '&�>��''��'&z!z��!�_`z�?��^_`zMounting: horizontal or vertical with gas valve upwards
Standard construction characteristicsBody material: PVC, PVC-C, PP or PVDF����������� � � � ��������������Gas connection valve: 5/8”UNF version 1Test: on request
Technical data=��������������� ������_��������������#������������$���������_����������������������"���������������������������^?�=������������������� '&z��!�_`z�?���_`z� � � � '&�>��''��'&z!z��!�_`z�?��^_`zMounting: horizontal or vertical with gas valve upwards
Standard construction characteristicsBody material: PVC, PVC-C, PP or PVDF����������� � � � ��������������Gas connection valve: 5/8”UNF version 1Test: on request
Technical data=��������������� ������_��������������#������������$���������_����������������������"���������������������������^?�=������������������� '&z��!�_`z�?���_`z� � � � '&�>��''��'&z!z��!�_`z�?��^_`zMounting: horizontal or vertical with gas valve upwards
Standard construction characteristicsBody material: PVC, PVC-C, PP or PVDF����������� � � � ��������������Gas connection valve: 5/8”UNF version 1Test: on request
Technical data=��������������� ������_��������������#������������$���������_����������������������"���������������������������^?�=������������������� '&z��!�_`z�?���_`z� � � � '&�>��''��'&z!z��!�_`z�?��^_`zMounting: horizontal or vertical with gas valve upwards
Standard construction characteristicsBody material: PVC, PVC-C, PP or PVDF����������� � � � ��������������Gas connection valve: 5/8”UNF version 1Test: on request
Technical data=��������������� ���������_��������������#������������$��� ��������_����������������������=������������������� ��!^_`z�?���__`z�Mounting: any position
Standard construction characteristicsBody material: carbon steel stainless steel AISI 316LGasket: NBR + polyamide Gas connection valve: 5/8” UNF version 1Painting: anti-rust primer (carbon steel only)Test: on requestStandard design: piston speed 0,5 m/sec.Special design on request: - piston speed 3 m/sec.������������������������������������� ��!� ����������������������������������������� ����
Technical data=��������������� ���������_��������������#������������$��� ��������_����������������������=������������������� ��!^_`z�?���__`z�Mounting: any position
Standard construction characteristicsBody material: carbon steel stainless steel AISI 316LGasket: NBR + polyamide Gas connection valve: 5/8” UNF version 1Painting: anti-rust primer (carbon steel only)Test: on requestStandard design: piston speed 0,5 m/sec.Special design on request: - piston speed 3 m/sec.������������������������������������������ ��!� ����������������������������������������� ����
Technical data=��������������� �������^����������������#������������$��� ��������_����������������������=������������������� ��!^_`z�?���__`z�Mounting: any position
Standard construction characteristicsBody material: carbon steel stainless steel AISI 316LGasket: NBR + polyamide Gas connection valve: 5/8” UNF version 1Painting: anti-rust primer (carbon steel only)Test: on requestStandard design: piston speed 0,5 m/sec.Special design on request: - piston speed 3 m/sec.������������������������������������������ ��!� ����������������������������������������� ����
General}�������������������� � � ������ �����������! ����������������������������� ���������themselves after the replacement of the bladder or it is used for the change of pre-charge values.>������������������ ������ ��� ��������������������������������������������������������pressure higher than the pre-charge value required, provided with pressure reducer (mandatory, �������������������������������������� ��������������'��£���_����$�>��������������������������� �������������������������������������������������nitrogen on the bladder avoiding in this way the possibility of demaging of the bladder itself.
Costruction���������������includes:- Valve body complete with ring nut connection to accumulator gas valve, pressure gauge, bleed and return snap-in hose connection- 3 m charging hose for high pressure series complete with bottle connections- One connection nipple to pressure reducer- Set of spare gaskets- Case
��������� - Adapter for special accumulator gas valves- Charging hose with lenght of 6 m.
$���������������� |�������������������_����Accumulator connection:- 5/8” UNF (standard)- 7/8” UNF (on request)!�¤�������?���!�&���#�������$- 1/4” ISO 228 (on request)
Bottle connection: see following page Pressure gauge- Ø 63 connection 1/4" gas- End scale 250 (standard)- Other values on request- Weight: 1,8 kg (case included)
130
120
Foresee a space of 200 mm from the gas valve to allow the installation and removal of the charging kit
Reduction for special gas valve
Foresee a space of 200 mm from the gas valve to allow the installation and removal of the charging kit
Pag. 65
HYDROPNEUMATIC ACCUMULATORS PULSATION DAMPENERS
HT 37 / C / 204 / 1113 / E
ACCESSORIESJ!���!����������������������
�������������������������������������*���������!������������������������������ �����������������������������������������������for safety reasons, the use of presure reducer mounted on the nitrogen bottle calibrated at the �������������������������������������������'��������������� ��������������The connection nipple between charging hose and reducer it is showed by the side of the page and it is normally supplied with the pre-loading set.
�������������������������������������>���������������� ����������������������������������������'��¦���_��������������������connect the nitrogen bottle through the proper nipple without the use of pressure reducer.The proper nipple has to be chosen according to the origin country of nitrogen bottle, as showed �����������������*�������������� ���������������§���������������������������������such country and coincide with the number used for the indication of bottle connection in the designation code. Each nipple has an own code (indicated on) to be used for the spare parts order and not on the designation of the pre-loading set.
Pulsation damper with electronical control lowers installation and operation cost �����������
Pulsation dampers are often used to obtain optimum conditions from piston and diaphragm pumps (dosing pumps).The pulsation damper is basically a hydropneumatic accumulator, with the task to reduce the pressure variations (pulsations), created during the cycle of the pump.When these pressure variations are constant, it is possible to calculate the volume of the pulsation damper and the necessary pre-charge pressure of the nitrogen, in order to reduce the pulsations to an acceptable rest pulsation.As a fact the systems not always work in these optimum conditions, because there may be ������������� �������� ������������� �������� ����������������� �����������������pressure, temperature and viscosity of the liquid.���������������������������������������� ��������� ��������������������! ������pressure will be eliminated.With the electronically control unit type REDC, it is possible to check and change in real time the pre-charge pressure of the pulsation damper, according to the working pressure.The electronically control unit type REDC, is a functional and economical alternative for the ��������������������������������������������������������������������������� �������the complete pressure range, or to charge or discharge the damper by hand every time according to the working pressure. These variations bring a considerable increase in installation and operating costs.In our case the pulsation damper will be charged or discharged automatically and thus the pulsation damper will have always an optimum performance.
To permit the electronically control of the pulsation damper two pressure transmitters are installed ����������#������!�����������!��������������������������������������������$�A mini-computer, installed in the switch cup-board elaborates the incoming signals of the pressure transmitters and controls the pre-charge situation of the pulsation damper, which will be automatically loaded or unloaded with nitrogen, according to the working pressure, through on-off valves.
The mini-computer also can survey the pulsation damper and activate alarms� ��������� ����������������������������������������������������� �
As HANSA-TMP has a very extensive range of products and some products have a variety of applications, the information supplied may often only apply ��������������� ��
If the catalogue does not supply all the information required, please contact ����������� ��������������������������� ��������������������!��������������������������"��� "���������������������� �
Whilst every reasonable endeavour has been made to ensure accuracy, thispublication cannot be considered to represent part of any contract, whether �#������������������