WEBSITE: www.jdsu.com/test COMMUNICATIONS TEST & MEASUREMENT SOLUTIONS Key Benefits Ethernet Service Interface Module (SIM) Gigabit Ethernet T esting for the HST-3000 Te JDSU HS-3000 platorm just got even better. Equipped with the Ethernet Service Interace Module (SIM) along with SAMComplete testing, ully compliant with IU-Y.1564, and fiber inspection and optical power measurement capability, the HS-3000 accelerates carrier Ethernet ser vice provisioning and mean-time-to repair. Accurately and simultaneously delivering IP video, voice, and data traffic over a structured Ethernet transport requires more than just a single Layer 2 or 3 pipe test. Te HS-3000 puts the power omulti-layer access network and carrier Ethernet ser vice provisioning and troubleshooting in the palm oyour hand. With SAMComplete service activation testing, ully compliant with IU-Y.1564, the HS-3000 emulates traffic simultaneously carrying IP video, voice, and data content to accurately validate structured Ethernet service-level agreements (SLAs). SAMComplete guides users through simple test setup and operation with easy-to-interpret results that can be saved using an innovative user interace. Te HS-3000’s flexibility per orms across various network inrastr uctures and tunnel- ing technologies (VLAN, MAC-in-MAC, and MPLS) that provide common quality oservice (QoS), traffic engineering, redundancy , and scalability across the service inrastructure. For carrier Ethernet ser vices deployed over optical fiber, up to 90 percent operor- mance aults are traceable to dirty or damaged fiber interaces. Te JDSU P5000i, the world’s most versatile and reliable analysis microscope, mounts to the HS-3000 USB interace or unique, objective pass/ail fiber i nspection that removes subjective guesswork. Te included FiberChekPRO™ sofware certifies fiber end-ace quality to industry standards (including IEC 61300-3-35) or customer specification s. •Single, compact module for testing next-genera tion carrier Ethernet •Automated SAMComplete/ITU-T Y.1564 test accurately measures KPIs for structured voice, video, and data •Flexible to support packet-based networ ks and optional legacy TDM testing •Supports Gigabit or 100 Mbps optical as well as 10/100 Mbps twisted-pair Ethernet •Offers fiber inspection and optical power meter to certify fiber connections and performance •Speeds service delivery and ensures that all voice, video, an d data services meet required bandwidth and performance requirements Key Features • Electr ical and optical Ethernet testing in a single module • SAMComplete provides Y .1564 ser - vice- activation te stin g method olo gy• Layer 2, 3, and 4 trac generation up to interace line rate • Automated RFC 2544 tests at Layers 2 to 4 (Eth/IP/CP/UDP) • Supports E thernet OAM, PBB/PBT , MPLS, VLAN, and Q-in-Q • Options for VoIP and IP video/Micro- sof V testing • Dual-port ‘ ru mode’ conguration enables live traffic analysis • Optional USB-mounted P5000i oers unique pass/ail fiber inspection
This document is posted to help you gain knowledge. Please leave a comment to let me know what you think about it! Share it to your friends and learn new things together.
Ethernet Service Interace Module (SIM)Gigabit Ethernet Testing or the HST-3000
Te JDSU HS-3000 platorm just got even better. Equipped with the Ethernet ServiceInterace Module (SIM) along with SAMComplete testing, ully compliant with
IU- Y.1564, and ber inspection and optical power measurement capability, theHS-3000 accelerates carrier Ethernet service provisioning and mean-time-to repair.
Accurately and simultaneously delivering IP video, voice, and data trac overa structured Ethernet transport requires more than just a single Layer 2 or 3 pipetest. Te HS-3000 puts the power o multi-layer access network and carrierEthernet service provisioning and troubleshooting in the palm o your hand. WithSAMComplete service activation testing, ully compliant with IU- Y.1564,the HS-3000 emulates trac simultaneously carrying IP video, voice, and datacontent to accurately validate structured Ethernet service-level agreements(SLAs). SAMComplete guides users through simple test setup and operation witheasy-to-interpret results that can be saved using an innovative user interace. TeHS-3000’s exibility perorms across various network inrastructures and tunnel-
ing technologies (VLAN, MAC-in-MAC, and MPLS) that provide common quality o service (QoS), trac engineering, redundancy, and scalability across the serviceinrastructure.
For carrier Ethernet services deployed over optical ber, up to 90 percent o peror-mance aults are traceable to dirty or damaged ber interaces. Te JDSU P5000i,the world’s most versatile and reliable analysis microscope, mounts to the HS-3000USB interace or unique, objective pass/ail ber inspection that removes subjectiveguesswork. Te included FiberChekPRO™ sofware certies ber end-ace quality toindustry standards (including IEC 61300-3-35) or customer specications.
• Single, compact module or testing next-generation carrierEthernet
• Automated SAMComplete/ITU-T Y.1564 test accurately measures KPIs or structured voice, video, and data
• Flexible to support packet-based networks and optional legacy TDM testing
• Supports Gigabit or 100 Mbps optical as well as 10/100 Mbpstwisted-pair Ethernet
• Oers fber inspection and optical power meter to certiy fberconnections and perormance
• Speeds service delivery and ensures that all voice, video, anddata services meet required bandwidth and perormancerequirements
Key Features
• ElectricalandopticalEthernettestingin a single module
SamComplete is an easy-to-use tool to quickly and easily measure service-levelagreement (SLA) perormance according to IU- Y.1564 service-activationmethodology. Te eature suite, available on HS-3000s with the multiple streamsoption, validates user-dened SLAs by rst testing each service independently during service conguration test. I the service conguration test passes, all streamsare tested simultaneously during the service-perormance test. SAMCompleteprovides pass/ail results or key perormance indicators (KPIs) including com-mitted inormation rate (CIR), extended inormation rate (EIR), rame delay (FD),rame-delay variation (FDV) and rame-loss rate (FLR) independently or up toeight simultaneous services.
SAMComplete employed in the HS-3000, as well as in the JDSU -BERD®/MS-5800,-6000,-8000,andQT-600oerstheuniquetime-savingcapabilitytostoptheserviceconguration test in the event o a ailure, saving technicians valuable time.
Service-perormance test (multistream) tests all streams simultaneously
Mbps Mbps Transmitted trac
Service 1
CIR
Service 2CIR
Service 3
CIR
Measured trac
Frame DelayFrame Delay Variation
Frame Loss Rate
Frame DelayFrame Delay Variation
Frame Loss Rate
Frame DelayFrame Delay Variation
Frame Loss Rate
@
Service confguration test (ramp test) validates each service/stream
Te HS-3000 delivers all the carrier Ethernet testing needed to qualiy Ethernet-based transport networks. In addition to supporting Ethernet CIR, FD, FLR, andback-to-back burst testing required in the de acto industry standard RFC 2544, theHS-3000 also tests packet jitter or FDV to ensure circuit readiness or transport-ing time-sensitive services such as Internet V (IPV) and voice over IP (VoIP).JDSU-enhanced RFC testing measures CIR, FD, and FV concurrently to reduce testtimes by more than 60 percent and delivers a zeroing-in algorithm to more quickly establish maximum throughput on an Ethernet virtual circuit (EVC). Using a pairoftestsetsandasymmetricRFCtesting,userscanvalidateEVCswithdierentupstream and downstream CIRs or they can test sequentially in both directions toensure any connection type meets the KPIs.
SLA Verication with Multiple Trafc Streams
Many service providers now realize the value o testing more than just a singleEthernet stream to the customer when providing multiple services over the sameEthernettransport.Itisextremelycriticaltotestdierentclassesofservice(CoSs)tooercustomerstieredservicesortoprioritizetracandeectivelymanagetri-ple-play networks. Tese deployments lead to new challenges where latency and lossmaynotaectregulartrac,buthigher-prioritytracfailstomeetitsrequiredSLA.
o ensure that delivery meets SLA requirements or structured voice, video, and dataservices, technicians can use the multiple streams option to measure Layer 2, 3, and4 perormance and oversubscribe the network elements to determine i the variousSLAs are met. echnicians can generate up to eight simultaneous trac streams,
Provider backbone bridging with trac engineering/transport (PBB-E/PB)oersanenhancementtoEthernet(IEEE802.1ah/802.1Qay)thatwasdevelopedto meet the scalability requirements o metro/aggregation networks. By adding abackbone tag (B-AG), operators can aggregate and maintain large numbers o links and services. Te HS-3000 PBB/PBB-E test suite lets users terminate ormonitor a PBB/PBB-E trunk or generate and analyze trac with backbone MAC/VLAN ID (B-MAC/B-VID) and service ID (I-SID).
Ethernet OAMEthernet operation, administration, and maintenance (OAM) gives service pro- viders a critical tool or troubleshooting carrier Ethernet services. Te HS-3000Ethernet service-layer OAM test suite lets customers monitor the status o a link,automatically identiy open links, and generate loopback and linktrace mes-sages or path verication and discovery. Te test suite complies with IU Y.1731/IEEE 802.1ag Connectivity Check (CCM/EH-CC), Loopback (LBM/EH-LB),and Linktrace (LM/EH-L) messages. With Link Layer OAM (IEEE 802.3ahEthernet First Mile), users can discover peer devices, monitor alarms, and providelink-level loopback capability.
Ethernet OAM testing
VoIP Testing
Successul VoIP service turn-up and troubleshooting requires proving connec-tivity to the signaling gateway, eature availability, and call quality. Te HS-3000can emulate an IP phone and place and receive VoIP calls via a huge range o VoIP signal gateways, including Cisco SCCP (Skinny), session initiation protocol(SIP), media gateway control protocol (MGCP), MEGACO, H.323, and NortelUnied Networks IP Stimulus (UNIStim). Te HS-3000 provides an objectivepacket-based measurement o VoIP provisioning by placing actual VoIP calls andmeasuring call quality o out-o-sequence packets by analyzing delay, jitter, andpacket loss. Te HS-3000 measures call quality based on elchemy’s patentedsingle-ended live-call method o assessing subjective voice quality in terms o bothmean opinion score (MOS) and R-actor in real time. Te HS-3000 then com-pares objective and subjective measurements to accurately veriy acceptable VoIP
call quality. Te HS-3000’s unique VoIP inspector mode automatically detectsnetwork congurations/customer premises equipment (CPE) congurations/sig-naling type and attributes, to rapidly reduce conguration time. For unsupportedgateway signaling, such as over a satellite link, the HS-3000’s convenient “auto-answer” mode automatically answers and provides the required KPIs or analysis.
IP Video TestingIP-based video services are helping traditional telecommunications service provid-ersgrowrevenuesbyoeringnewanddierentiatedservices.However,deliveringgoodqualityofexperience(QoE)cost-eectivelyiscomplexanddemanding.eHS-3000 can help accomplish this task with a suite o video test options that canbe ned-tuned to the needs o various networks and eld crews. It supports both video on demand (VoD) and broadcast service analysis, new service installationand troubleshooting, root-cause analysis that quickly separates source issues romdistribution network ones, and matches specic quality o service (QoS) metrics tothresholds tuned to a given network design. Tese advanced test suites include: trueCoS testing that analyzes mixed voice, data, and video trac in the access network;MOS analysis with detailed audio, video, and a combined audio-visual (AV) view;
and detailed packet analysis supporting error correction mechanisms operating atthe packet level using Pro-MPEG Forum or Microsof MediaRoom techniques, aswell as packet-loss distribution analysis. Te MediaRoom analysis urther analyzesR-UDP error-recovery mechanisms as well as instant channel change (ICC) actions.Te HS’s copper, DSL, and Ethernet test interaces and operating modes, includ-ing terminate, monitor, and through, coupled with the advanced test suites simpliesmultilayer analysis, expanding possible depths or problem-solving and root-causeanalysis. Simple pass/ail indicators or critical KPIs make the HS easy to use.
Fiber Testing
Fiber Inspection with the P5000i Digital Analysis Microscope
For years, the JDSU HS-3000 Handheld Services ester has been the one instrumenttechnicians have trusted or everything rom copper testing to service verication.Yet today’s carrier Ethernet networks also require ber inspection to assure error-reeperormance given that the primary cause or poor perormance in optical networksis contaminated ber connectors. Adding the JDSU P5000i Digital Fiber Inspectionprobe to the HS-3000 gives technicians an essential tool that bridges the gapbetween copper and ber testing as they expand into veriying Carrier Ethernet net-works or various ber (Fx) connections terminated in a ber-ed digital subscriberline access multiplexer (DSLAM). Te USB-mounted P5000i with FiberChekPRO™provides unique, reliable pass/ail analysis to quickly and easily certiy that every con-nection in the network is optimized or a lietime o perormance.
Miniature USB 2.0 Power Meters with FiberChek2™ Integration
Te miniature JDSU MP-Series Power Meter measures optical power via a USB 2.0connected to the HS-3000. Tis unique device enables digital processing o opticalpower measurements and integrates directly with JDSU FiberChek2 sofware, theindustry-leading automated ber inspection and analysis program. Te HS-3000supports two MP power meter models: the MP-60 or 850, 1300, 1310, 1490, and1550 nm connections, and the MP-80 or 980, 1310, 1480, and 1550 nm connec-tions. Te size, unctionality, and ease-o-use o these tools make them extremely useul and practical or testing optical power levels.