HSM HL 4010 Voltage 400 V Frequency 50 Hz Width 1674 mm Height 2500 mm Weight 4450 kg Loading height 1130 mm Pressing power 400 kN Bale length 1100 mm Bale width 750 mm Driving power 7,5 + 1,1 kW Bale height 750 mm Cycle time in idle operation 48 s Bale weight (max.) 300 kg Hourly bale output 3-4 Loading dimensions 690 x 1050 mm Length 5640 mm Number of strappings 3 Strapping material Wire Technical and design modifications reserved. The HSM HL 4010 horizontal baler has been designed with an operating concept and technical features in mind to make it the optimum machine for food retailers. The baler can be fed continuously and with ease via a lifting and tilting device which delivers cardboard from the waste container directly into the press chamber. A hydraulic pre-compactor means that bulky cardboard is dealt with by the machine without difficulty or feeding problems. Bale ejection is handled by the machine efficiently and safely with minimum operator effort. All in all the HSM HL 4010 horizontal baler is a sophisticated solution for food retailers – and at a great price-performance ratio. Very low space requirement Compresses cardboard Especially large loading aperture and hydraulic pre-compactor for bulky materials Convenient filling via hydraulic lifting/tilting device Trolley locking via magnet and position monitoring through sensor Suitable for continous loading Hydraulic counterplate for bale removal ensures optimum operating convenience and safety [email protected] www.hsm.eu Powered by TCPDF (www.tcpdf.org)