19-Sep-08 1 / 19 The content of this document is (almost) free under the Creative Commons Attribution- NonCommercial-ShareAlike 3.0 Unported license. Basically, you can reuse, remix and share my work for non-commercial purposes. You must, however attribute my part of the work somehow, for example by linking to the original post’s permalink: http://canne.wordpress.com/2008/09/19/iomega-storcenter-1tb-2x500gb-setup/ . How-To: setup Iomega® StorCenter™ Shares Prerequisites You have installed the network drive on your home network, installed Iomega Discovery Tool Pro on a computer connected on the same network. The discovery tool has detected the network drive, as illustrated on the below picture. If the Map Drive (M:) button does what you want to do, you can stop reading here. Target and Motivation My goal is to setup automatic connection to the shared file system provided by the Iomega network drive so that I will have two shared file system permanently available: 1. S: drive for shared files – open to all users of the home network 2. P: drive for private files – available only for each person individually The motivation is to share music, pictures and other similar items on S: drive while the system backup and other files without general interest would go on P: drive. As the “User Experience” of Iomega network drives (and Windows) is far from the single vendor systems such as Mac, I have written this document – as my own technical note which is hopefully useful for somebody else who is struggling with little or non-existent documentation that comes with the Iomega network drive. You can download more complete user guide for Iomega’s network drives from their web site, but frankly I did not find that document very useful either. Initial Configuration Network Identity Since the connection of the Iomega StorCenter to your home network is automatic, there should be a DHCP server around. My ADSL Modem and Wire/Wireless router Netgear 834PN is acting as DHCP server for my network. Let’s take a look what it says about Iomega StorCenter (picture on the next page). As it was already noticed by the Iomega Discovery Tool Pro, the network address given to Iomega StorCenter is 192.168.0.10.
19
Embed
How-To: setup Iomega® StorCenter™ Shares · For example, a Samba server is often set to automatically create a share of all the user home directories (e.g. /users/name is shared
This document is posted to help you gain knowledge. Please leave a comment to let me know what you think about it! Share it to your friends and learn new things together.
Transcript
19-Sep-08
1 / 19
The content of this document is (almost) free under the Creative Commons Attribution-
NonCommercial-ShareAlike 3.0 Unported license. Basically, you can reuse, remix and share my work
for non-commercial purposes. You must, however attribute my part of the work somehow, for example