How to setup CCcam/Newcs/Oscam with ClearOS 5.2 Linuxwiki.intesitalia.com/lib/exe/...setup_cccam_newcs_oscam_with_clearo… · 15: As lot asked how to install NewCs into ClearOs so

(#1)

Eurocardsharing Forum > Other Options > Tutorials > Cardsharing Tutorials

How to setup CCcam/Newcs/Oscam with ClearOS 5.2 Linux

Page 1 of 83 1 2 3 11 51 > Last »

View First Unread Thread Tools Search this Thread Rating: Display Modes

kapzas

Super Moderator

Offline

Posts: 4,148

Level: 48 [ ]Life: 355 / 1183

Magic: 1382 / 12874

Experience: 35%

Thanks: 1,271Thanked 2,149 Times in 874Posts

Join Date: Mar 2007

04-April-2008, 23:45

This tutorial helps you to setup a Linux PC CCcam server under 1 hour, even for users with noLinux knowledge.

We need some old working PC. Hardware: Pentium 3 or Amd 600Mhz and up, 256mb (512mboptimal) ram, from 5gb HDD and up, Networkcard, and a simple 1mb, 4mb, 8mb... or onboardvideocard (no need a fancy 128mb AGP/PCI-E videocard).

Intro:Out there are many Linux distro's. With most of them you can build a good share server, but weuse today "ClearOs".

What is ClearOs you ask!? ClearOs is a powerful network and gateway server designed for smallorganizations and distributed environments. Though ClearOs comes with an extensive list offeatures and integrated services (see sidebar), the solution is easy to configure thanks to theintuitive web-based interface. ClearOs Homepage

Is it stable!? Yes it is very stable and works almost perfectly with CCcam.

OK lets start now.

1: Download and burn it to a CD. Link for ClearOs iso:ClearOS Enterprise 5.2 Service Pack 1

2: Installation steps:1) Choose a Language: Installation language2) Keyboard Type: Your keyboard language3) Installation Method: Local CDrom4) Install Type: Install5) To Proceed with the installation type "ClearOs"6) System Mode: Standalone Mode7) Specify Lan IP Address: Manual Configuration (Set dynamic ip configuration if your routersupport MAC based static lease)8) Nameserver IP: your router gateway IP (example 192.168.1.254 or what u have there)9) Set The System Root Password10) Partitioing: Use default11) Select Software Modules: Now with new ClearOs you can choose install "Graphical Console"(GUI), or without it. "Intrusion Detection And Prevention" is pretty cool thing against thehackers and prevents smaller DDOS attacks. Everything else you can tropp. You can installmissing modules easy later under dashboard directly if needed.

3: Now if ClearOs is installed and you used manual IP table then you can unplug monitor andkeyboard from PC you do not need them anymore.If you used automatic DHCP, then log to server from current monitor and keyboard to knowwhat IP your server has.Use command: ifconfigNow you see your server IP, unplug monitor and keyboard from PC.

How to setup CCcam/Newcs/Oscam with ClearOS 5.2 Linux http://www.eurocardsharing.com/f163/how-to-setup-cccam-newcs-osc...

1 di 13 17/12/2010 23.58

4: System setup.1) Write to your webbrouser next https://192.168.1.142:81 of cource your server lan IP.2) Next u get warning message like so "This Connection is Untrusted"Hit the tab "I Understand the Risks", then the tab "Add Exception" and at least "ConfirmSecurity Exception" (It can happen that u need make 2-3 times that over again, when u get tothe login page!)3) LoginUsername: rootPassword: What u entered during the ClearOS installation4) Language: default is English5) Network: Please set mode to "Standalone Mode No Firewall" later if everything is working ucan enable Firewall if u want it.6) Time Zone: set your country7) Domain: you can leave it to default "clearos.lan" or change. It is up to you.8) Organization: fill the forms like u want, not needed to use your real data there.9) Congratulations, you have completed the system setup wizard! and hit the tab "Continueconfiguring your system"10) Finish: and again u need make that step "This Connection is Untrusted" Hit the tab "IUnderstand the Risks". Then the tab "Add Exception" then "Confirm Security Exception" and atlast "Resend". (It can happen that with FireFox brouser u need make 3-5 times that over again,when u get to the main page back!)

5: Set up the Dashboard.1) Hit on tab "ClearCenter" and "Register System". (If you had already ClarkConnect registered,then same data u can use forward with ClearOS as well. But if you are new user then hit thatlink and register your self: Register ClearOS2) Hit on tab "ClearCenter" and "Software Modules" From there tick "FTP server module" and hit"Go". Wait, when it finish install. Depends from system speed from 2-3 minutes it can take, butyou get constant info as well to when it is finish.3) Close the dashboard window complete and open it again, then u see new Tab up there called"Server" and under that is now FTP. Next open that FTP and set "Status - Running" as "On boot- Automatic". "Maximum Instances" set down from 30 to 14) Open tab "Directory" and "Users" Now u have message there "The required user databaseengine is not running. Continue" Please hit that "Continue" tab now.5) LDAP is used to store user and password information. Just hit there "Update" tab.6) Open again "Directory" and "Users". Now hit the tab "Add" and fill the next form:

Code:

Username: blabla (your FTP and Home directory username)

First Name: fafa

Last Name: gaga

Password: xxxxx (your FTP access password)

Verify: xxxxx

Hit the tab "Add" to save new user data.

6: Download CCcam pack and FTP client software. Unpack CCcam pack and take out from thereCCcam.x86 and CCcam.cfg.WinSCP Free SFTP, FTP and SCP client for Windows

7: Open FTP client app add there lines like so:Session: serverHost named: 192.168.1.15User name: blabla that you have created under dashboardPassword: xxxxxNow OK and connect to server.

8: Copy with FTP client CCcam.x86 and CCcam.cfg to share server. If it is done close the FTPsession.

9: Now we need open Putty. If you do not have putty you can download it here: Download puttyfor windows PCLog with putty to server as root not as user blabla!Now we can put some commands to get CCcam to right place.

10: Commands: (command "ls" is directory viewer) Please give commands exactly like i writehere then it works 100%!!!

cd /varmkdir /var/binmkdir /var/etcls

Note: mkdir is command for create new directory. If you see now 2 new directory then that partis OK. Next commands are:

cd /home/blablals

Note: that blabla is user what you created under dashboard and you see there CCcam.x86 and


2 di 13 17/12/2010 23.58

CCcam.cfg.

cp CCcam.x86 /var/bincp CCcam.cfg /var/etc

Note: cp is command for copy. Command rm is for delete.

cd /var/binlschmod 755 CCcam.x86ls

Note: Now you see that CCcam.x86 is green, before it wase withe.

CCcam auto startup script:

nano /etc/rc.d/rc.local

Note: there you see line like that: "touch" and so one. under that line is lot empty space. Nowplease write next line exact under that "touch" line there so:

/var/bin/CCcam.x86

Note: / you can get there only with shift+7 and ctrl+o is save file and ctrl+x exit. Look out thatyou do not change there nothing else!

cd /var/binls./CCcam.x86

Note: ./CCcam.x86 is command to start CCcam manually from command line and command:killall CCcam.x86 stops it agan. For CCcam debuge mode use command: ./CCcam.x86 -d

cd /var/etclsnano CCcam.cfg

Note: with that command you have access to cfg file to edit it or you can use tutorial 15: to setto whole server FTP access . I prefer to change cfg file over putty.

12: How to get CCcam 2.1.0, 2.1.1 and 2.1.2 working with ClearOs 5.2 CCcam 2.1.3, 2.1.4 as2.2.x don´t work with ClearOs 5.2!Please give next commands into your system command line:

mkdir testcd testwget http://web.zone.ee/kapzas/libstdc++.so.6.0.9cp libstdc++.so.6.0.9 /usr/libcd /usr/libchmod 755 libstdc++.so.6.0.9unlink libstdc++.so.6ln -s libstdc++.so.6.0.9 libstdc++.so.6/sbin/ldconfigcd ..cd ..rm -rf test

13: Done. CCcam server is up and running. With ClearOs working most external cardreadersserial and usb with no extra linux configuration.

For serial reader in COM1 put into CCcam.cfg so:

PHOENIX READER PATH : /dev/ttyS0

If you have attached to COM2 then so:

PHOENIX READER PATH : /dev/ttyS1

COM3: ttyS2 and so one.

For attached USB1 reader like Smargo Smartreader+ so:

SERIAL READER : /dev/ttyUSB0 smartreader+

Attached USB2:

SERIAL READER : /dev/ttyUSB1 smartreader+

For USB3: ttyUSB2 and so one.

14: How to setup Infinity reader under ClearOs 2 way options:http://www.eurocardsharing.com/f163/...-connect-96082 or http://www.eurocardsharing.com/f163/...-windows-59966 Note: "apt-get" does not work with ClearOs 5.1 anymore u need touse command "yum"

Big thanks for that Infinity reader howtos goes to Bennieboy and to Ramad


3 di 13 17/12/2010 23.58

15: As lot asked how to install NewCs into ClearOs so here is tutorial how do too that. Pleasefollow exaclty my next instruction!

cd /libln -sf libcrypto.so.0.9.8e libcrypto.so.0.9.8

Download NewCs pack NewCS 1.67 RC1 and do so:Unpack Newcs pack and take out from there 2 files: newcs.i686 andnewcs.xml.phoenix Next rename newcs.i686 to a newcs.x86 and newcs.xml.phoenix to anewcs.xmlCopy newcs.x86 to /var/bin and set chmod 755Copy newcs.xml to /etcNext edit newcs.xml for you needs and start newcs.x86 same way as you started CCcam:/var/bin ./newcs.x86And for last we put newcs.x86 to server auto startup script.If use newcs and CCcam together then palce so that newcs.x86 script is next over CCcam.x86startup script then boots newcs.x86 first up and then CCcam.x86 like it should.newcs auto startup script:



/var/bin/newcs.x86

16: Here is tutorial how to install No-Ip under ClearOs:You need first install cc-devel developers package to be abel to execute no-ip install commands:

yum groupinstall "Development Tools"cd /home/blablamkdir no-ipcd no-ipwget http://www.no-ip.com/client/linux/noip-duc-linux.tar.gztar zvxf noip-duc-linux.tar.gzcd noip-2.1.9-1makemake install

Note: that blabla is user what you created under dashboard!

Put your no-ip account login/email string

Put password to that login/email

Enter update interval: [30] write to there 30 Then no-ip makes updates to your IP every 30minute

Do you wish to run something at successful update? [N] (y/n) hit n

cd .. and agan cd ..rm -rf no-ip and hit entertipe command exit to leave.Done. You have successfuly installed no-ip under linux.Here u can look same commands too: The Newbie's Guide to the No-IP™ Linux Client

17: Here is tutorial how to install DynDns under ClearOs Big thanks for that link goes toBennieboy

18: Totorial how to set FTP access under ClearOs to by root and not only as user.To enable the user that you have created to to have ftp access to the hole server you must dothis steps:

1) edit file proftpd.conf: nano /etc/proftpd.conf2) comment this line #DefaultRoot ~you should have something like this:

# To cause every FTP user to be "jailed" (chrooted) into their home# directory, uncomment this line.# DefaultRoot ~

Big thanks for that FTP tutorial goes to nmga

19: If you have CCcam stabilty problem with your PC server and you have tryed everything,then here comes a help for that issue. Change from your CCcam.cfg next line:

#DVB API: -1to aDVB API: -1

Note: You need restart the CCcam after change. It works only with linux PC based CCcamservers. Dreambox or other reciver users do not try that!

Big thanks for that tip goes to Shalafi


4 di 13 17/12/2010 23.58

20: Tutorial how to create CCcam running check script and if CCcam stops then that script runsCCcam self up again.

1) Log over putty to server as root and give next commands to create the script:

cd /etctouch CCcamcheck.shchmod 777 CCcamcheck.shnano CCcamcheck.sh

Next copy all that inside the CCcamcheck.sh:

Code:

#!/bin/bash

if ! ps -C CCcam.x86 > /dev/null

then

/var/bin/CCcam.x86

fi

Next hit from your keyboard ctrl+o to save and ctrl+x to exit.

2) Now we need make a cron job what executes the script every 5, or from you set minutes.Please give next commands to make a cron job:

cd /etcexport EDITOR="nano"crontab -e

There add new line to the job list so:

Code:

*/5 * * * * /etc/CCcamcheck.sh

Note: / sign you can get there only with shift+7 !

Hit ctrl+o to save and ctrl+x to exit and test the script out if it is working. Kill CCcam from/var/bin and wait 5 minutes and CCcam should go self up agan.Note: If you feel that 5 minutes is too long, then u can lower it.

3 minute cron:

Code:


1 minute cron:

Code:


I know that "CCcam running check script" is not the best one, but it works well and it is easy touse. If u want use more complicate script then they you find in forum.

Big thanks for that CCcam running check script goes to FSS

21: Tutorial how to Configure CCcamphpinfo in ClearOs Big thanks goes to gangster429

22: How to get working a cheap ID cardreader Omnikey or SCM with ClearOs 5.1.yum install opensc pcsc-lite ccidchkconfig pcscd onservice pcscd start

Next you need "pcsc" version of newcs. Exmple u have PC linux server, then you neednewcs.i686.pcsc newcs-1_67RC1.zip Newcs conf examples and chat you find from here: How toget a Omnikey or SCM reader working with NewCs/Oscam under Linux and Windows

23: Manual way to compile self Oscam for ClearOs with support of webinterface, smargosmartreader (USB), serial (COM) reader, mouse (USB) reader and omnikey/SCM (PCSC) reader.

1) ClearOs update for compile task needed new packages:

yum updateyum groupinstall "Development Tools"yum install openssl-develyum install pcsc-lite-devel


5 di 13 17/12/2010 23.58

mkdir cmakecd cmakewget http://www.cmake.org/files/v2.6/cmake-2.6.4.tar.gztar xvzf cmake-2.6.4.tar.gzmkdir cmake-buildcd cmake-build../cmake-2.6.4/bootstrapgmakesudo gmake installcd ..rm -rf cmake

2) Compiling the oscam. After rename and copy to the new path:

cd /usr/srcsvn co http://streamboard.gmc.to/svn/oscam/trunk oscamcd /usr/src/oscamcmake -DWEBIF=1 -DPCSC=1makemv oscam oscam.x86cp oscam.x86 /var/bincd ..rm -rf oscam

3) New attributes for launch:

cd /var/binchmod 755 oscam.x86

4) Oscam auto startup:



/var/bin/oscam.x86

If u have already added CCcam and newcs too, then it looks like so:

/var/bin/oscam.x86sleep 10/var/bin/newcs.x86sleep 10/var/bin/CCcam.x86

5) Oscam config flies copy to correct path and new attributes set:

cd /usr/local/etc/wget http://web.zone.ee/kapzas/oscam.confwget http://web.zone.ee/kapzas/oscam.serverwget http://web.zone.ee/kapzas/oscam.userwget http://web.zone.ee/kapzas/oscam.serviceschmod 755 oscam.confchmod 755 oscam.serverchmod 755 oscam.userchmod 755 oscam.services

At last edit oscam config files for your needs. If u want update your oscam for latest svn justrun setp 2) and 3) over again.

Good testing

Kapzas

Last edited by kapzas; 05-December-2010 at 14:30. Reason: Update

The Following 393 Users SayThank You to kapzas For ThisUseful Post:Remove Your Thanks

2F4U (17-September-2008), a31r (08-September-2010), abtorrent (10-January-2010),abuhabib (14-December-2008), ac_simps (18-August-2009), adamjohn (04-December-2008),adil7777 (02-January-2009), Adonis70 (13-February-2009), adytzu2007 (27-July-2010),AgentSixtynine (06-August-2008), alacan (29-March-2010), AlamSAsif (04-May-2008),alamski (26-July-2009), alberto53 (08-March-2009), alemprator123 (03-August-2008),alheeti (23-November-2008), Ali0820 (08-November-2009), amical (27-March-2010),andy_dm (26-November-2010), araignee (02-March-2010), arash_totti88 (06-March-2009),argo (04-September-2009), artman (28-September-2008), astratto72 (12-April-2008),astronman (17-September-2008), atispeed (23-September-2009), azax_2 (10-May-2008),a_annouar (09-May-2010), b j m (28-September-2010), ba5_ba5 (13-January-2010),babla (15-August-2008), Bacteria (27-April-2008), badremammar (08-October-2008),bajo11 (02-October-2008), bambacha (11-December-2008), banush (01-August-2009),BarbaNegra (02-October-2008), Barney2222 (02-April-2010), bartyam (20-September-2008),baukland (04-May-2009), belmondo2001 (18-December-2008), ben4cardsharing (14-April-2009),


6 di 13 17/12/2010 23.58

Bentbo (06-March-2010), bernli (26-November-2008), Bert72 (21-January-2009),BiBiCh (16-September-2009), Biocide (15-May-2008), blader3 (08-July-2008), blowup (02-January-2009), boeha (08-June-2008), brijdec (03-July-2008), buchead (16-August-2009),budo1770 (01-November-2009), burcak (02-September-2008), burim2010 (16-May-2010),butyiba (27-May-2009), caesar (21-June-2008), calhau (04-June-2009), camdboy (26-February-2010),cankurt (09-March-2009), capepanwa (19-June-2009), CARD2009 (14-March-2010),carthago (11-February-2009), cemel (10-May-2010), chai (25-July-2008), chakik (03-September-2009),Charly20 (08-April-2008), cherrymoon69 (19-January-2009), chiccon (21-October-2010),Chiller07 (12-October-2010), chip (16-April-2009), christof1500 (17-March-2009), clansat (07-August-2008), clouca (17-October-2009), clouzotbe (22-June-2009), cold007 (01-October-2008),cornelshs (25-March-2009), croke (15-December-2010), CS_njofra (13-December-2008),cypriot_01 (17-February-2009), da100 (12-November-2008), dachacho (25-January-2010),dalibor79 (17-February-2010), Danny73 (01-April-2009), Dante12 (30-November-2010),danyguit2000 (21-October-2010), Danzel (30-October-2010), Darkvil (05-April-2008),DBOXLOVER (25-January-2010), del111 (16-March-2010), Denilson15 (12-July-2008),deskag (17-August-2009), diablodark (10-February-2010), digital music (09-June-2009),Discoveryawaits (18-November-2009), disera (08-March-2009), djhmk (21-December-2008),dmxjo (11-February-2010), drew23 (10-December-2008), Duall (03-June-2010), eadas (15-July-2008),entouch (14-July-2008), farmer (16-December-2008), fatamorgana (05-July-2009),FDD2006 (27-December-2008), fiacco (11-March-2010), finek1 (12-May-2009), firga (03-June-2008),flyfar4 (17-November-2008), force1030s (03-April-2010), fredis1993 (20-June-2009), FSS (16-April-2008), furioustn (21-September-2009), furyo (14-December-2009), futureneo (23-August-2008),gangster429 (04-September-2008), ganzeegeezer (19-June-2010), gartner (19-April-2010),GaryCyprus (03-February-2009), Geniusx (15-October-2010), genugeo85 (28-September-2010),gggabcsi (21-October-2009), ghosts (01-August-2008), gianluca68 (26-June-2009), gindi (17-October-2009), gnppld (11-August-2009), goldrake02 (04-November-2008), govno (03-June-2010),greg-cccam (23-April-2008), gul156 (04-October-2008), HackTN (16-July-2009), hampi (12-March-2009), hani84 (14-March-2009), heaven (01-August-2010), hecsa (24-August-2008),Hendrik200 (19-November-2010), hotboy183 (12-June-2009), HoUnD (08-February-2010),hpkch (06-November-2009), humax7 (01-August-2009), hxxxlxxxh (21-July-2008), ida3a (23-May-2009), imstillalive (09-February-2009), innuendo_to (01-December-2010), interman (22-September-2008), jardano (21-January-2009), jarjartv (25-August-2008), jawa (27-September-2008),jaxi (02-September-2009), jeanburgart (03-May-2009), jetson (10-January-2009), jgliser (27-October-2008), jimelb (01-September-2009), jims45 (16-November-2009), jinxt (18-July-2010),joedenob (05-May-2008), jor (21-May-2008), jorgis (07-May-2008), jozefp (31-March-2010),jpdc1991 (30-November-2010), justme (23-April-2008), jyapgr (31-October-2008),kalimero1 (26-December-2009), KaLLe2k (11-January-2009), kaputa (07-April-2008),kdarte (06-November-2008), ker256 (20-October-2009), khalilg (02-October-2010),kierindongo (21-May-2008), kikkokman2006 (13-June-2009), kingkonglk (03-June-2010),Knik (29-October-2010), koko30sat (23-July-2009), KOP (26-September-2008),kosmopoliten (20-November-2008), KPW2 (25-February-2010), ktzelepi (22-January-2009),kUbbAS (11-August-2008), kukuia (15-January-2010), kuralsiz (07-October-2009), lankyadz (20-April-2008), leds (31-May-2009), leofezollari (20-November-2009), leonpadi (22-May-2008),lfc4ever (23-February-2010), Librarian (05-April-2008), lizard_ago (04-April-2008),ljondov (11-October-2008), lotusse38 (22-May-2008), lubrano (30-September-2009), lucdarox (29-July-2009), luisito (24-October-2009), lukskw (22-January-2010), lz4ql (22-March-2009),Macgyver (05-March-2010), maestro007 (10-July-2010), mahon68 (14-August-2010), makay (10-June-2009), malakas (08-December-2010), mali107 (31-December-2008), mannn (14-September-2009),manos19730 (12-March-2010), marcelo (10-May-2010), marciolg (14-May-2008),marcodm800 (08-November-2009), markbeek (20-February-2010), Markoni (04-December-2008),Marre (16-February-2009), MasterENG (05-June-2009), matics (28-June-2009), matoc (06-March-2010),mazzard (23-August-2008), mbnet (08-August-2008), mehdisa (23-January-2009),member91040 (04-February-2009), mganddrea (28-April-2010), mgerome (21-November-2009),micro77 (05-February-2009), mishe (14-October-2009), mistergr (07-December-2009), MiTkO (11-July-2008), mitrovica1 (03-November-2009), Mixman (27-May-2008), mizoucom (30-June-2009),mlove (02-February-2009), Mo7amed (08-September-2008), mohican4me (10-February-2010),moita3 (24-May-2010), moljac (31-March-2009), monster76 (01-November-2010),Moonglider (13-October-2008), Morality (18-October-2010), mormon (22-February-2009),Morte (14-April-2008), morten9836 (02-January-2009), mosaca (19-December-2009),mrbondo2 (06-October-2008), mvarsani (01-May-2010), naevol (05-August-2009), nazzoo (23-October-2008), neohack (23-October-2008), neps1966 (10-July-2008), netagra (04-May-2009),netman (15-May-2009), netsubi (20-June-2009), nicoskid (09-April-2008), NIKITPATEL (02-May-2010),nikoe (10-March-2009), nizzze (21-November-2010), nmfsantos (03-September-2008),novazolo (03-February-2010), noxios (20-May-2009), oasisontherun (24-March-2009), omur_ (29-June-2009), orac68 (10-August-2008), oscar9 (10-June-2009), oscarf (02-December-2008),osdgap (05-August-2008), outlander (04-October-2009), oven (29-May-2009),pacman362 (08-November-2008), palT (18-April-2008), PANKOT1979 (24-November-2008),pantgr (14-April-2009), panther_j (29-September-2008), paulo renato pedroso (28-October-2009),pawel_cs (17-February-2009), pegasusflash (01-July-2010), peho (19-February-2009),pengpockys (06-January-2009), peoples (28-July-2009), phill0 (17-June-2008), piddiw (19-December-2008), pinotje (19-March-2010), plonker (09-April-2008), ppet (28-July-2009),pragmatrans (05-January-2010), primabo (22-February-2009), progpeter (30-December-2008),P_M_R_S (03-September-2009), qukyalba (11-June-2009), r0ot$harp (24-January-2010),ra7oo (16-March-2009), rahulan (19-July-2010), rajan2323 (03-June-2008), Ramad (21-July-2008),ran2009 (Yesterday), ratbu (06-October-2010), rayman_et (05-June-2009), redron007 (16-July-2010),RemyZero (10-April-2009), rf600r (15-March-2010), robife (14-November-2009), roddie (12-August-2010), ruelps (14-December-2010), ruiamorim (21-May-2008), r_Weelie (20-December-2008),sabai (29-November-2008), saledjordjevic (22-December-2009), Salgado12 (07-July-2009),samrock (28-November-2010), samsung2009 (21-February-2009), sanagol (06-October-2008),sandji (20-July-2009), sarahofdream (27-January-2010), SaraMarazmas (30-October-2009),satanic (15-June-2010), sateraser (18-April-2008), satxare (30-October-2009), savin stelian (17-May-2009), scanner5555 (05-March-2010), seek share (01-October-2009), seheryeli21 (27-September-2010), SerAlex (06-July-2010), serigraphist (11-April-2009), Seroglu (15-October-2008),sevax (26-November-2010), seyfo (05-December-2010), SGSG (11-May-2009),Shaitantheevil (16-June-2009), shalafi (05-December-2008), shareuk (05-February-2009),shawn (21-November-2008), shonr (09-June-2008), silla (13-September-2009), Smoothas (23-October-2010), Smurfer (05-April-2008), Soul4000 (25-January-2009), spaw2new (11-April-2009),Spc_xsat (20-March-2010), spiff (23-November-2008), sportcafe (06-August-2008),springer (19-October-2008), staoddo (16-October-2009), STAR 14 (07-August-2008),stefanos_gr (26-April-2008), steveharlow (25-September-2010), stig887 (30-August-2008),svenni (18-February-2009), swiebo (13-October-2008), syskg (16-September-2010),szymek (Yesterday), tanabut (05-November-2009), tanveerpower (26-January-2009),tbenmila (10-May-2010), tdwno058 (06-November-2010), tellstar (10-March-2010),Telnet (20-December-2008), Temel (19-January-2009), teo1966 (06-August-2009),thamon (02-September-2008), therat (20-May-2008), tictac25 (03-September-2008),tigana18 (25-July-2008), tjoda (07-July-2008), toli1980 (22-January-2009), tolvaly (04-April-2010),Toobig (06-September-2008), total_confusion (09-June-2008), tra1 (10-May-2010),twity (02-September-2009), u22u (06-March-2009), UDA_65 (05-August-2009),unkletom (01-September-2010), usinst (12-March-2010), valters23 (16-December-2008),Ventura900 (18-October-2008), villan (28-September-2008), vitg (18-June-2008), vladoa (17-February-2010), vladobggr (17-September-2009), vwgti (05-April-2008), wacko911 (11-July-2010),


7 di 13 17/12/2010 23.58

(#2)

(#3)

waiwit (02-October-2009), wassss (18-November-2009), webashik (07-April-2008),whoslooking (26-June-2009), wiltzer (15-June-2008), wishmaster23 (17-February-2010),xon (25-March-2009), yakup (25-August-2008), yalaci (30-December-2008), Yuyito (25-October-2008),Zasso (02-October-2008), zeusino (28-September-2010), zjabarin (24-November-2008),zmobariz (16-September-2009), zurika (13-December-2009)

Sponsored Links

07-April-2008, 21:07

giol76

This message has been deleted by Librarian. Reason: deleted user

kaputa

Banned

Offline

Posts: 19

Level: 3 [ ]Life: 0 / 52

Magic: 6 / 519

Experience: 9%

Thanks: 125Thanked 12 Times in 9 Posts

Join Date: Jul 2007

07-April-2008, 21:19

Hello kapzasThank u for ur great work here.I Hope this is big help for start a pc server.bye for nowkaputa

The Following User SaysThank You to kaputa For ThisUseful Post:

pantgr (14-April-2009)

kapzas

Super Moderator

Offline

Posts: 4,148

Level: 48 [ ]Life: 355 / 1183

Magic: 1382 / 12874

Experience: 35%

07-April-2008, 22:42

To giol76you can try out. If chipset are similar with install PC and what is on that laptop then it may workso.


8 di 13 17/12/2010 23.58

(#4)

(#5)


Join Date: Mar 2007

The Following User SaysThank You to kapzas For ThisUseful Post:

tbsn59 (Yesterday)

kaputa

Banned

Offline

Posts: 19

Level: 3 [ ]Life: 0 / 52

Magic: 6 / 519

Experience: 9%


Join Date: Jul 2007

08-April-2008, 20:43

Hellomy server ClarkConnect server is working now but still have some problem.1) when i swich of the server and when i start again server not start automaticaly.2) today my server offline even its runing . its sending peep soundwhat can be the reason???thank u kapzasbyekaputa

The Following 2 Users SayThank You to kaputa For ThisUseful Post:

pantgr (14-April-2009), raphaelo (22-March-2009)

kapzas

Super Moderator

Offline

Posts: 4,148

Level: 48 [ ]Life: 355 / 1183

Magic: 1382 / 12874

Experience: 35%


Join Date: Mar 2007

08-April-2008, 21:24

kaputa then your PC motherboard reques attached keybord on boot then it works agan.


9 di 13 17/12/2010 23.58

(#6)

(#7)

Apples Champion!CC_share

Super Moderator

Offline

Posts: 1,503

Level: 33 [ ]Life: 80 / 801

Magic: 501 / 9719

Experience: 6%

Thanks: 115Thanked 2,477 Times in 465Posts

Join Date: Oct 2006

Location: No GPS fix found,(are you inside a building?)

08-April-2008, 21:53

Quote:

Originally Posted by kapzas


On some mainboards you can avoid it by going into the bios and changing the line:HALT ON ALL ERRORS to HALT ON NO ERROR

This can usually be found in the first screen of the bios setup

-------------------------------------------------------DM7000 Running Nabilosat Darkstar IILinux CardServer running Debian 5.0.2

I Hate people who steal my stuff-------------------------------------------------------

All you´re cards are belong to us

If you're happy with our board, Please consider making a donation HERE

Looking for Peers again. HERE

It's not a shame if you use the Thanks button

The Following 3 Users SayThank You to CC_share ForThis Useful Post:

gianluca68 (21-June-2009), KOP (23-May-2008), mxantho (31-January-2009)

Thank you

kaputa

Banned

Offline

Posts: 19

Level: 3 [ ]Life: 0 / 52

Magic: 6 / 519

Experience: 9%


Join Date: Jul 2007

Thank you - 09-April-2008, 20:23

Quote:

Originally Posted by CC_share

On some mainboards you can avoid it by going into the bios and changing the line:HALT ON ALL ERRORS to HALT ON NO ERROR

This can usually be found in the first screen of the bios setup

Thank u for answeri will trybyekaputa




10 di 13 17/12/2010 23.58

(#8)

(#9)

(#10)

palTMember

Offline

Posts: 44

Level: 5 [ ]Life: 0 / 110

Magic: 14 / 1252

Experience: 43%


Join Date: Feb 2007

09-April-2008, 20:32

Nice tutorial! How does ClarkConnect compares with Ubuntu as CCcam server? Is it more stabile,faster or smth? I've tried Ubuntu 7.10 dmesg is filled with strange error messages after i startCCcam 2.08. Like:[96922.856835] ofo requeuing : rcv_next 7B6643F5 seq 7B6643F5 - 7B6643FD

yes server running again

kaputa

Banned

Offline

Posts: 19

Level: 3 [ ]Life: 0 / 52

Magic: 6 / 519

Experience: 9%


Join Date: Jul 2007

yes server running again - 09-April-2008, 20:34

Quote:

Originally Posted by kapzas


Hi kapzasthank u for ur quick reply.server is runing now but last nite also same things hapend peep sound

again. then i check the worning mesg.:-

CPU machine check exception: 0000000000000004Bank 2 : F60020000000017a at 000000008aab000Kernel Panic-not syncing : CPU Context corrupt

Press Alt-F2 to Alt-F6 for Additional shell terminals

what can be the reason? i hope u have some idea about this msg.thank ubyekaputa



kapzas

Super Moderator

09-April-2008, 20:48

kaputa


11 di 13 17/12/2010 23.58

Edit Tags

Offline

Posts: 4,148

Level: 48 [ ]Life: 355 / 1183

Magic: 1382 / 12874

Experience: 35%


Join Date: Mar 2007

I tip that you have memory module (ram) failure. Please test with MemTest your memory.Link for download: http://www.memtest.org/#downiso

The Following 2 Users SayThank You to kapzas For ThisUseful Post:

gravity80 (07-May-2009), Sharingtv (18-April-2008)

Page 1 of 83 1 2 3 11 51 > Last »

Tags

None

Quick Reply

Message:

Options

Quote message in reply?

« Previous Thread | Next Thread »

Currently Active Users Viewing This Thread: 1 (1 members and 0 guests)

ran2009

Posting Rules

You may post new threadsYou may post repliesYou may not post attachmentsYou may edit your posts

BB code is OnSmilies are On[IMG] code is OnHTML code is OffTrackbacks are OffPingbacks are OffRefbacks are Off

Forum Jump


12 di 13 17/12/2010 23.58

Powered by vBulletin® Version 4.0.6Copyright ©2002 - 2010, Jelsoft Enterprises Ltd.

RSS Feed - Sitemap - Contact Us - Eurocardsharing - Archive - Top


13 di 13 17/12/2010 23.58

How to setup CCcam/Newcs/Oscam with ClearOS 5.2 Linuxwiki.intesitalia.com/lib/exe/...setup_cccam_newcs_oscam_with_clearo… · 15: As lot asked how to install NewCs into ClearOs so

Documents