How to resolve the issue of Printer Duplex Not Working?

How to resolve theissue of PrinterDuplex NotWorking?

WHAT IS PRINTER DUPLEX NOT WORKING?When it comes to Printer Duplex Not Working, it

basically means that you print on both sides of the

paper in question. Now, this could be done both

manually or even automatically simply by turning

over the paper. Your model should have the built-in

functionality in order to duplex print. Simplex

printing is another technique whereby prints can be

garnered on a single side of the paper.

FOR PRINTING ON BOTH SIDES, YOU CAN USE THE PRINT DRIVERSETTINGS AS WELL. THE STEPS INVOLVED TO PRINTER DUPLEXNOT WORKING AS FOLLOWS:

To keep page ordering issues at bay, the paper tray should be loaded withsufficient blank paper so that the print job can be completed without anydisruption.Open the document, click on File option followed by the Print option.Select your printer, and then choose Printer Properties, Preferences, orPrinter Setup (whichever option is displayed), for opening up the PrintingPreferences or the Document Properties options.Decide whether you want to read the pages as a booklet or a tablet.You can select the below mentioned processes for choosing and openingthe settings for duplex printing-Choose the Features, Layout or Finishing tabs and then choose the optionfor page flip. This comes under the Print under both sides manuallySuppose there is a tab for the Printing shortcut. You should choose thesame and then choose the shortcut for two-sided printing. You can thenopt for the page flip option which is basically printing manually on bothsides.

If you can find a Basic tab, select a page flip option under Double-Sided Printing(Manual).Click OK, and then Print. At this stage, it should be noted that if the printerautomatically pulls the pages back in and prints the other side, there will be supportfor duplexing automatically and the printing procedure will be finished. Also, if theprinter does not automatically do so, you should continue the steps below to reloadthe pages to print the other side.Next, the printed pages should be removed from the output tray, and then reloadedinto the paper tray.If you have a front-loading printer, in all likelihood, the stack printed side facing upwill have to be loaded in case of Inkjets and Laser Jets will require printing in adownward facing position where it has the top/bottom edge on it, depending uponyour requirements.In case it is a rear-loading printer, then the pages should be flipped over in order toensure that the printed side is downward-facing. The bottom short edge has to bethen loaded into the printer.Click Continue to print the other side of the pages.

THANK YOU