How to remove e*thirteen cranks 2014-2017...To remove cranks using a self extractor cap, simply turn the 8mm hex screw counter clockwise. This will loosen the bolt, then remove the
This document is posted to help you gain knowledge. Please leave a comment to let me know what you think about it! Share it to your friends and learn new things together.
Transcript
How to remove e*thirteen cranks 2014-2017Crank removal
Written By: The Hive - Jeremy
How to remove e*thirteen cranks 2014-20… Draft: 2018-06-08Guide ID: 44 -
This document was generated on 2020-01-27 11:30:06 PM (MST).
Lightly grease and install the threaded barrel crank removal tool (included with cranks). Ourproprietary E*thirteen crank removal tool must be used on all 2015-2017 cranks.
Tighten the tool it until it is 100% inside the threads of the spindle, it should not stick out past theend face of the spindle
Step 4
Lightly grease the threads and face of the extractor plate tool and install it into the crank arm
Tighten using a 10mm hex wrench until snug, do not over tighten but be sure the tool is bottomedout inside the arm
How to remove e*thirteen cranks 2014-20… Draft: 2018-06-08Guide ID: 44 -
This document was generated on 2020-01-27 11:30:06 PM (MST).
TRS race cranks do not use a self extractor like some of our other cranks, so an Isis or Octalinkcrank removal tool like the Park Tool CCP-44 must be used to remove the cranks.
We also include a small removal tool with the cranks for trailside needs
Step 9
For either tool, start by removing the screw with an 8mm hex wrench
Be sure to remove the bolt and the washer from the crank arm
How to remove e*thirteen cranks 2014-20… Draft: 2018-06-08Guide ID: 44 -
This document was generated on 2020-01-27 11:30:06 PM (MST).