How to print photographic quality images from your Kyocera Mita color printer.

How to print photographic quality images from your Kyocera Mita

color printer

Step 1: The Print Screen

As printer drivers sometimes differ, please make sure you make the following

selections in “Properties” from the File > Print window:

1)Print to thick paper (even if you are using glossy paper that is not thick)

2)Set print quality to picture image or photo

Step 2: Preparing the Printer

• Once you have selected the proper settings in the print driver, open the Multi Purpose Tray and place the desired paper into it.

Step 3: Interaction with Printer

• After you have printed the document from your computer, the color printer panel will beep and blink

• Please check the LCD for errors.

• If no errors are present, press Go

LCD

Go button

Step 4: Media Selection Page 1

• If the photo peals from the page or there exist white spots in your print, you are not using the proper paper or missed a selection in Steps 3 or 4.

• You can use a wide variety of papers.

?

Step 4: Media Selection Page 2

Papers that were tested at Tigerville Elementary and worked well are:

1)HP 32# bond glossy photo imaging paper coated 2 side (Item#Q6545A)

2)Kromekote high gloss laser paper, 8pt/48# bond, coated 1 side

3)Futura Laser Gloss, 40# bond/100# text, coated 2 side

4) Mohawk Color Copy Gloss, 60# cover/66# bond)

Rules of Thumb for other papers

• In general, the better the paper, the more it will cost.

• The brighter or whiter the paper, the better the print will look.

• Make sure any paper that you use is specified for LASER PRINTERS.

• Paper can be purchased over the internet for very good prices.