How yo u the Pa tch & Backup o f an image for DM800clone I know that many have waited for this manual, therefore hope they make good use and before publishing images patched for clones that they test well first as not to harm anybody. From today each one is free to put what he wants in his Dream800 clone as well, and I cannot be held responsible for any damage that happens to his box. There are 2 forms of patching an image for clone. 1. Using the GONE publisher Pro or another one (complicated process) 2. Using our friend plug-in Barry Allen (simple process) In this manual we go to describe how to patch the image and to make backup using our friend Barry Allen which is simplest and all they obtain to make. I am going to use secondstage_70 as example but you can make it with any secondstage.BL 1.Installing an image in the flash (my frist preference is Oozoon) and of followed plug-in Barry Allen. I do not go to describe the process because many must have already it installed and know how to use. 2. Second we install in multiboot the image that we intend to patch or to make backup. We pull out box with this image, configure and we install everything that we intend to use. Type new plugins, cams, config files, last drivers-you modulate, substituting always 2files bcm7401.ko and stb-core.ko (! important for clones! ) ..... etc. and we verify if everything functions well, until getting the perfect image. ! Now the secret goes here! To be able to make our backup with our BL (former. BL69,70,72) we have to edit script of the Barry Allen (ba.sh) in /media/ba We go to edit the 2 following lines: BOXTYPE=dm800 SECONDSTAGEVERSION=70 - > here we put the BL of our Dream (fig1) Later we look for checkstring and we leave the CHECKSTRING of dm800 blank to see (fig2) if [$BOXTYPE = " dm800" ]; then CHECKSTRING= Save and exit.