How to Modify r99 Ce, Hsdpa and Hsupa Processing Set in Nsn Bts Manager

LEXCORP INDONESIA, PT

HOW TO MODIFY R99 CE, HSDPA AND HSUPA

PROCESSING SET NSN BTS MANAGER

Fachrudin Sudomo

7/13/2014

NSN 3G TUTORIAL SERIES AND DEDICATE TO GREAT LEXCORP PUMA TEAM OF NPI TELKOMSEL PROJECT-2014

Page | 1 [email protected]

HOW TO MODIFY R99 CE, HSDPA AND HSUPA PROCESSING SET NSN BTS MANAGER

1. LOGIN NODE-B VIA BTS MANAGER

Input IP Node B, username, and Password.

IP Node-B could be check from dump.

2. AFTER SUCCESSFUL LOGIN

first view after login was successful

Page | 2 [email protected]

3. CLICK COMMISSIONING TAB

Click commissioning Tab, Uncheck list for TRS, click reconfiguration

4. DO NOT FORGET TO BACK UP FIRST

By clicking Backup Commissiong Files, then rename as u want

Page | 3 [email protected]

5. R99 CE, CLICK NEXT UNTIL SHOW THIS PAGE

1. Click next until show this page

2. You can modify R99 CE here, as u want

6. HSDPA PROCESSING SET, CLICK NEXT UNTUL THIS PAGE

For HSDPA Proset u can modify here

Page | 4 [email protected]

7. HSUPA PROCESSING SET, CLICK NEXT UNTIL SHOW THIS PAGE

Click send parameter, save configuration and wait until finish.

8. SOME USEFUL NOTES

Check RSRAN073 to view how many number on Max user reached failures

If failures due to Max User Reached. Remember, 1 Additional Proset theoretically

can reduce 8000 number of failures.

If HSDPA and HSUPA Proset already set on 8 for both of it, R99 CE should be

reduced to 900 (if double FSME Module was installed)

If u modify HSUPA Proset, remember to set MaxnumberEDCHLCG WBTS Level

Parameter as Licenses configured and divide with number of LCG that

configured.

Wishing this tutorial will be useful information for u