How to install software of iGrabber and iGrabber nano on MAC 1 connect iGrabber or iGrabber nano to PC, Open Utilities 2. Open System information in Utilities 3 check what’s your hardware name in USB Device tree
Welcome message from author
This document is posted to help you gain knowledge. Please leave a comment to let me know what you think about it! Share it to your friends and learn new things together.
Transcript
How to install software of iGrabber and iGrabber nano on MAC
1、connect iGrabber or iGrabber nano to PC, Open Utilities
2. Open System information in Utilities
3 check what’s your hardware name in USB Device tree
4 Your will find iGrabber device in USB hi-Speed Bus
5 Check the Produce ID and Vendor ID
If you ID as below . Please download software from below link http://www.geniatech.com/down-eng/videocapture/iGrabber-OS X1.5.5.pkg.zip Product ID：0x1abe
Vendor ID:0x1f4d
6. If device name is USB 2816 Device in USB Hi-Speed Bus
7 Please check Product ID &Vendor ID of USB 2861 Device
If you ID info as below pls use VideoGlide software. Software download address http://www.geniatech.com/down-eng/videocapture/VideoGlideOSX1.5.5.dmg.zip
Product ID：0x2861
Vendor ID:0xeb1a(Empia Technology,Inc.)
Related Documents
