How To Hook Up Smart Board

1

Setting up the SMART Board

2

Shut down and turn off your computer before proceeding!

3

Set the SMART board approximately 6 feet from projector

6 fe

et

4

Set the pens and eraser in the appropriate trays

5

Locate the SMART board connector

6

Plug the funky-looking end into the serial port on the computer

Look for this symbol

7

Unplug the keyboard connector from the back of the computer and plug in the adapter in its place

8

Plug the keyboard connector into the adapter

9

Connect the other end of the SMART board connector into the SMART board

10

Setting up the Projector

11

Locate the projector connector and power cord

12

Unplug the monitor from the back of the computer. Plug in the projector connector in its place.

13

Plug the connector from the back of the computer into the RGB 1 slot..

Plug the connector

from the monitor into the

RGB 2 slot

14

Plug the power cord in to the projector, then plug the cord into a power strip.

15

Turn on the main power switch at the back of the projector, then press the power button on the top

16

Turn on and log in to your computer

17

Orient the SMART board

This process gets the

SMART board ready to use with your computer

18

Adjust the distance between the SMART board and the projector so that the computer screen fills the SMART board

19

At your computer, from the SMART board software menu, select Orient

20

At the SMART board, follow the directions on the screen to orient (match it up) with the computer