8/9/2019 How to Construct a Rain Barrel
1/16
Rain BarrelsRain BarrelsCollecting the rain that falls on your roof can help yourCollecting the rain that falls on your roof can help yourgarden and save some of your water usage. Learn how togarden and save some of your water usage. Learn how tostart your own water conservation system with easystart your own water conservation system with easy--toto--
install rain barrels (install rain barrels (figure Afigure A).).
It's estimated that during the hot summer months, theIt's estimated that during the hot summer months, theaverage homeowner uses 40 percent of the householdaverage homeowner uses 40 percent of the household
water in the yard, and while so much water may make forwater in the yard, and while so much water may make forsome green lawns, all that water use is a huge drain onsome green lawns, all that water use is a huge drain on
our already dwindling supply. Too often, rainwaterour already dwindling supply. Too often, rainwater
becomes wasted water when it's channeled into alreadybecomes wasted water when it's channeled into alreadystressed sewer systems.stressed sewer systems.
To save a little water from going down the drain, use aTo save a little water from going down the drain, use asimple, efficient, lowsimple, efficient, low--cost method for homeowners tocost method for homeowners to
collect and recycle water. Installing rain barrels, which arecollect and recycle water. Installing rain barrels, which are
simply large containers that capture rainwater at the endsimply large containers that capture rainwater at the endof your downspout can help conserve water. A quarterof your downspout can help conserve water. A quarter--inch of rain falling on the average home yields a littleinch of rain falling on the average home yields a littleover 200 gallons of water. A rain barrel can be filledover 200 gallons of water. A rain barrel can be filled
within a matter of minutes during a good rain.within a matter of minutes during a good rain.
figure A
8/9/2019 How to Construct a Rain Barrel
2/16
Steps to Make a Rain BarrelSteps to Make a Rain Barrel
Step 1Step 1
1. Start with a large, food1. Start with a large, food--
quality, plastic barrel andquality, plastic barrel anddrill a hole in the cap ofdrill a hole in the cap ofthe barrel with a large,the barrel with a large,
3/43/4--inch drill bit (figureinch drill bit (figureB). While plastic isB). While plastic ispreferred because it won'tpreferred because it won't
rust, any large,rust, any large,waterproof container willwaterproof container willwork well.work well.
figure B
8/9/2019 How to Construct a Rain Barrel
3/16
2. Drill a second2. Drill a secondhole nearby (figurehole nearby (figure
C) along the sideC) along the side
of the containerof the containerabout 1 or 2 inchesabout 1 or 2 inches
from the top.from the top.
Step 2Step 2
figure C
8/9/2019 How to Construct a Rain Barrel
4/16
Steps 3Steps 3 -- 553. Flip the barrel over and drill a third hole into the3. Flip the barrel over and drill a third hole into thebase.base.
4. Determine the number of pipe adaptors (male)4. Determine the number of pipe adaptors (male)
and couplings (female) needed to span the distanceand couplings (female) needed to span the distancefrom the hole at the barrel base to the outer edgefrom the hole at the barrel base to the outer edgeof the barrel.of the barrel.
5. Wrap each threaded adaptor end of piping with5. Wrap each threaded adaptor end of piping withplumber's tape for a watertight seal.plumber's tape for a watertight seal.
8/9/2019 How to Construct a Rain Barrel
5/16
Step 6Step 6
6. Screw the6. Screw the
sectionssectionstogether,together,
making suremaking sure
they're securethey're secure
and tightand tight
(figure D).(figure D).
Figure D
8/9/2019 How to Construct a Rain Barrel
6/16
Step 7Step 7
7. Attach a curved7. Attach a curved
coupling to the hole oncoupling to the hole onthe barrel base andthe barrel base andconnect the additionalconnect the additionaladaptors to the curvedadaptors to the curvedsection. Join a spigot tosection. Join a spigot tothe end of the attachedthe end of the attachedpipe section (figure E).pipe section (figure E).
This will allow you toThis will allow you tocontrol the release ofcontrol the release ofthe collected water.the collected water.
figure E
8/9/2019 How to Construct a Rain Barrel
7/16
Step 8Step 8
8. The hole on the8. The hole on theside of the barrel isside of the barrel is
for the spigot.for the spigot.
Secure a smallSecure a smallpiece of PVC pipepiece of PVC pipe
through the hole tothrough the hole to
connect the spigotconnect the spigot(figure F).(figure F).
figure F
8/9/2019 How to Construct a Rain Barrel
8/16
Steps 9Steps 9 -- 1010
9. Join the spigot to9. Join the spigot tothe pipe.the pipe.
10. Attach a garden10. Attach a garden
hose to the spigothose to the spigot
(figure G).(figure G).figure G
8/9/2019 How to Construct a Rain Barrel
9/16
Step 11Step 11
11. To make a water11. To make a watercollection funnel, cut acollection funnel, cut a
piece of window screeningpiece of window screeninga little bigger than the PVCa little bigger than the PVCcoupling and secure it withcoupling and secure it with
a hose clamp (figure H).a hose clamp (figure H). figure H
8/9/2019 How to Construct a Rain Barrel
10/16
Steps 12Steps 12 -- 1414
12. Slide the pipe into the large hole in the12. Slide the pipe into the large hole in thebarrel.barrel.
13. To attach the rain collector to your13. To attach the rain collector to yourhouse, find a location that is level.house, find a location that is level.Remember that when the rain collector isRemember that when the rain collector isfull, it can weigh over 400 pounds, so it'sfull, it can weigh over 400 pounds, so it's
important to place it in a level location toimportant to place it in a level location tokeep the barrel stable.keep the barrel stable.
14. Place the rain barrel on stacked14. Place the rain barrel on stackedcinderblocks to raise it off the groundcinderblocks to raise it off the ground(figure I). This provides room underneath(figure I). This provides room underneaththe barrel for the release spigot and athe barrel for the release spigot and awatering can to access the rainwater. Makewatering can to access the rainwater. Makesure the cinderblocks are stable.sure the cinderblocks are stable.
figure I
8/9/2019 How to Construct a Rain Barrel
11/16
Steps 15Steps 15 -- 1616
15. About one or two15. About one or two
inches above the barrelinches above the barrelalong the gutter, cutalong the gutter, cutout and hinge an elbowout and hinge an elbow
section.section.
16. Fit the base of the16. Fit the base of the
section with a metalsection with a metalscreen (screen (figure Jfigure J).).
figure J
8/9/2019 How to Construct a Rain Barrel
12/16
Step 17Step 17
17. Place a pad17. Place a pad
on the metalon the metalscreen to softenscreen to soften
the sound ofthe sound of
rain hitting therain hitting the
metal (metal (figurefigure
KK).).
figure K
8/9/2019 How to Construct a Rain Barrel
13/16
Step 18Step 18
18. When the18. When the
barrel is full, thebarrel is full, thedownspout can bedownspout can be
hinged closed tohinged closed to
stop the flow ofstop the flow of
water to the barrelwater to the barrel
((figure Lfigure L).).
figure L
8/9/2019 How to Construct a Rain Barrel
14/16
Step 19Step 19
19. Because most rain barrels19. Because most rain barrels
hold only 55 gallons ofhold only 55 gallons ofwater, you can stretch thewater, you can stretch the
garden's water supply evengarden's water supply even
further for those dry summerfurther for those dry summermonths by adding additionalmonths by adding additional
barrels (barrels (figure Mfigure M). Just make). Just make
sure to redirect the surplussure to redirect the surpluswater.water.
figure M
8/9/2019 How to Construct a Rain Barrel
15/16
Steps 20Steps 20 -- 2222
20. When you install your rain barrel, add an overflow pipe,20. When you install your rain barrel, add an overflow pipe,
so that excess water can escape. Make sure that theso that excess water can escape. Make sure that the
overflow pipe is pointed away from your home'soverflow pipe is pointed away from your home'sfoundation.foundation.
21. Always keep a lid on your rain barrel to prevent any21. Always keep a lid on your rain barrel to prevent anycurious children or animals from toppling in, as well ascurious children or animals from toppling in, as well as
preventing any potential mosquito populations frompreventing any potential mosquito populations from
exploding.exploding.
22. If you treat your roof for pests or wood, be sure to22. If you treat your roof for pests or wood, be sure to
unhook your rain barrel for at least two weeks.unhook your rain barrel for at least two weeks.
8/9/2019 How to Construct a Rain Barrel
16/16
For additional information contact:For additional information contact:
WVCA Watershed Resource CenterWVCA Watershed Resource Center
1900 Kanawha Blvd., East1900 Kanawha Blvd., East
Charleston, WV 25305Charleston, WV 25305--01930193
Phone: 304.558.0382Phone: 304.558.0382
FAX: 304.558.0373FAX: 304.558.0373
EE--mail:mail:[email protected]@wvca.us
Or visit us on the web at:Or visit us on the web at:http://www.wvca.us/wvwrc/http://www.wvca.us/wvwrc/