Page 1/12 VPECKER Bluetooth Manual Connection Guide WINDOWS XP Step 1: Make sure there is an icon of the Bluetooth in the taskbar on the right side of the bottom of the screen. Step 2: Adding Bluetooth device to the computer: click the icon of the Bluetooth, it will show the interface like the following picture 1, then click “Add a Bluetooth Device”. Picture 1 Tick “My device is set up and ready to be found” on the interface of Picture2. Click Next. Picture 2
Welcome message from author
This document is posted to help you gain knowledge. Please leave a comment to let me know what you think about it! Share it to your friends and learn new things together.
Transcript
Page 1/12
VPECKER Bluetooth Manual Connection Guide
WINDOWS XP
Step 1: Make sure there is an icon of the Bluetooth in the taskbar on the
right side of the bottom of the screen.
Step 2: Adding Bluetooth device to the computer: click the icon of the Bluetooth, it
will show the interface like the following picture 1, then click “Add a Bluetooth
Device”.
Picture 1
Tick “My device is set up and ready to be found” on the interface of Picture2. Click Next.
Picture 2
Page 2/12
Step 3: To choose the TDINTEL VPECKER in the searching interface as the following
Picture 2 shows to pair with the Bluetooth. Here the name of the VPECKER is
VB16078388，please click “Next” to pair.
Picture 3
Step 4: Now we need to input the pairing code manually. Selecting the second subject
“Use the passkey found in the documentation”, and input the default code “1234”,
click Next to pair.
Page 3/12
Picture 4
Step 5: We need to stop here for a minute on the account of the configuration of the
computer, as Picture 5 shows.
Picture 5
Page 4/12
If it shows the interface as the following picture 6, it means the Bluetooth device
has been added the computer. Then please close this page.
Picture 6
If the Bluetooth has been added before, and you want to add it again, please delete
it first. The steps are as follows:
1. Click the right bottom Bluetooth icon, select “Show Bluetooth Devices”.
Picture 7
2. Enter into the interface as Picture 8 shows, click the Bluetooth to be deleted,
and then click the Remove button, waiting to finish.
Page 5/12
Picture 8
WINDOWS 7
Step 1: Make sure there is an icon of the Bluetooth in the taskbar on the
right side of the bottom of the screen.
Step 2: Adding Bluetooth device to the computer: click the icon of the Bluetooth, it
will show the interface like the following picture 1, then click “Add a Bluetooth
Device”.
Picture 1
Step 3: To choose the TDINTEL VPECKER (like VB********) in the searching
Interface as the following Picture 2 shows to pair with the Bluetooth.
Page 6/12
Picture 2
Step 4: Now we need to input the pairing code manually. Click the second subject
“Enter the device`s pairing code” on Picture 3.
Page 7/12
Picture 3
Step 5: Input the default pairing code “1234”, click “Next” to pair.
Picture 4
Page 8/12
Step 6: We need to stop here for a minute on the account of the configuration of the
computer. If it shows the interface as the following picture5, it means the
Bluetooth device has been added the computer. Then please close this page.
Picture 5
If the Bluetooth has been added before, and you want to add it again, please delete
it first. The steps are as follows:
1. Click right bottom Bluetooth icon, select “Show Bluetooth Devices”.
Picture 6
2. Enter into the interface as Picture 7 shows, click the Bluetooth to be deleted,
click the right button of the mouse to choose or click “Remove device” to delete.
Page 9/12
Picture 7
WINDOWS 8/10
Step 1: Make sure there is an icon of the Bluetooth in the taskbar on the
right side of the bottom of the screen.
Step 2： Adding Bluetooth device to the computer: click the icon of the Bluetooth,
it will show the interface like the following picture 1, then click “Add a
Bluetooth Device”.
Picture 1
Step 3: To choose the TDINTEL VPECKER (like VB********) in the searching
Interface as the following Picture 2 shows to pair with the Bluetooth.
Page 10/12
Picture 2
Step 4: Now we need to input the pairing code manually.
Picture 3
Step 5: Input the default pairing code “1234”, click “Next” to pair.
Page 11/12
Picture 4
Step 6: We need to stop here for a minute on the account of the configuration of the
computer. If it shows the interface as the following picture5, it means the
Bluetooth device has been added the computer. Then please close this page.
Picture 5
If the Bluetooth has been added before, and you want to add it again, please delete
it first. The steps are as follows:
Page 12/12
1. Click right bottom Bluetooth icon, select “Show Bluetooth Devices”.
Picture 6
2. Enter into the interface as Picture 7 shows, click the Bluetooth to be deleted,
and then click the Remove button, waiting to finish.
Picture 7
Related Documents
