VHG2-11021D VHG2-15021D VHG3-11021D VHG3-20021A VHG3-70021D MODEL VHG2-11025D VHG2-15025D VHG3-11025D VHG3-20025A VHG3-70025D DISCHARGE GPM (LPM) 2.0 (7.6) 1.8 (6.8) 2.5 (19.5) 2.5 (9.5) 2.3 (8.7) OPERATING PRESSURE PSI (Bar) 1000 (69) 1500 (103) 1000 (69) 2000 (138) 700 (48) OPERATING TEMPERATURE Ambient to 180°F (82°C)*, Maximum Temperature Rise of 120° (67°C) Ambient to 275°F (135°C)* B.T.U. PER HOUR 168,000 140,000 245,000 245,000 245,000 BURNER TYPE Natural Draft FUEL TYPE Natural Gas BURNER ASSEMBLY Ring Type with Aspirating Spud, 120V Control STACK SIZE 8" (20cm) 8" (20cm) 8" (20cm) 8" (20cm) 8" (20cm) COIL Schedule 40 Schedule 40 Schedule 40 Schedule 40 Schedule 40 PUMP Tri-Plunger, Belt-Drive Tri-Plunger, Belt-Drive Tri-Plunger, Belt-Drive Tri-Plunger, Belt-Drive Tri-Plunger, Belt-Drive PUMP MOTOR HP 1.5 2 1.5 5 1.5 Volts/Phase 120V 1ph 120V 1ph 120V 1ph 230V 1ph 120V 1ph Total Amperage 15 17 15 20 15 CORD & PLUG 4' w/ GFCI & 15-amp Plug 4' w/ GFCI & 20-amp Plug 4' w/ GFCI & 15-amp Plug 4' w/ GFCI, No Plug 4' w/ GFCI & 15-amp Plug HOSE 50' x 3/8" I.D. 3000 psi Insulated Wire Braid Steam Combination Hose GUN & WAND Insulated Shut-Off Gun with Variable Pressure Wand NOZZLE Hardened Stainless Steel (15°) and Brass (Soap) CHEMICAL CONTROL Downstream Chemical Injection PAINT Epoxy Powder Coating LENGTH/WIDTH/HEIGHT 50" x 26" x 41" (127cm x 66cm x 104cm) NET WEIGHT Lbs (Kg) 319 (145) 325 (147) 319 (145 325 (147) 319 (145) SHIPPING WEIGHT Lbs (Kg) 375 (170) 365 (166) 365 (166) 390 (177) 380 (172) Note: We are constantly improving and updating our products. Consequently, pictures, features and specifications in this brochure may differ slightly from current models. There may be slight variances in gallonage and pressures due to variances allowed by manufacturers of our machine components. We attempt to keep our machine performance ±5% of listed specifications. This equipment intended for outdoor use only. Customer is responsible for any permits, compliance with codes, or other government requirements associated with the installation, use, or disposal of waste associated with this equipment. *When incoming water temperature is 60° (16°C) VHP2-11021D VHP2-15021D VHP3-11021D VHP3-20021A VHP3-70021D MODEL VHP2-11025D VHP2-15025D VHP3-11025D VHP3-20025A VHP3-70025D DISCHARGE GPM (LPM) 2.0 (7.6) 1.8 (6.8) 2.5 (9.5) 2.5 (9.5) 2.3 (8.7) OPERATING PRESSURE PSI (Bar) 1000 (69) 1500 (103) 1000 (69) 2000 (138) 700 (48) OPERATING TEMPERATURE Ambient to 180°F (82°C)*, Maximum Temperature Rise of 120° (67°C) Ambient to 275°F (135°C)* B.T.U. PER HOUR 168,000 140,000 245,000 245,000 245,000 BURNER TYPE Natural Draft FUEL TYPE Liquid Propane Gas (Vapor Only) BURNER ASSEMBLY Ring Type with Aspirating Spud, 120V Control STACK SIZE 8" (20cm) 8" (20cm) 8" (20cm) 8" (20cm) 8" (20cm) COIL Schedule 80 Schedule 80 Schedule 80 Schedule 80 Schedule 80 PUMP Tri-Plunger, Belt-Drive Tri-Plunger, Belt-Drive Tri-Plunger, Belt-Drive Tri-Plunger, Belt-Drive Tri-Plunger, Belt-Drive PUMP MOTOR HP 1.5 2 2 5 1.5 Volts/Phase 120V 1ph 120V 1ph 120V 1ph 230V 1ph 120V 1ph Total Amperage 15 17 20 20 15 CORD & PLUG 36' w/ GFCI & 15-amp Plug 36' w/ GFCI & 20-amp Plug 36' w/ GFCI & 15-amp Plug 36' w/ GFCI, No Plug 36' w/ GFCI & 15-amp Plug HOSE 50' x 3/8" I.D. 3000 psi Insulated Wire Braid Steam Combination Hose GUN & WAND Insulated Shut-Off Gun with Variable Pressure Wand NOZZLE Hardened Stainless Steel (15°) and Brass (Soap) CHEMICAL CONTROL Downstream Chemical Injection WHEELS 2 Ply Tubed Pneumatic 10" x 4.00" Wide Stance PAINT Epoxy Powder Coating LENGTH/WIDTH/HEIGHT 50" x 26" x 41" (127cm x 66cm x 104cm) MACHINE WEIGHT Lbs (Kg) 315 (143) 321 (146) 315 (143) 344 (156) 318 (144) SHIPPING WEIGHT Lbs (Kg) 385 (175) 375 (170) 375 (170) 403 (183) 393 (178) VHW2-11021D VHW2-15021D VHW3-11021D VHW4-20021A VHW3-70021D MODEL VHW2-11025D VHW2-15025D VHW3-11025D VHW4-20025A VHW4-30025A/B/C VHW3-70025D DISCHARGE GPM (LPM) 2.0 (7.6) 1.9 (7.2) 3.0 (11.3) 3.5 (13.2) 3.5 (13.2) 2.7 (10.2) OPERATING PRESSURE PSI (Bar) 1000 (69) 1500 (103) 1000 (69) 2000 (138) 3000 (207) 700 (48) OPERATING TEMPERATURE Ambient to 200°F (93°C)*, Maximum Temperature Rise of 140°F (78°C) 275°F (135°C) Max* B.T.U. PER HOUR 168,000 147,000 230,000 315,000 315,000 235,200 BURNER Oil Fired, Automatic Light, 120V 1ph FUEL TANK CAPACITY Gal (Liters) 6 (22.7) FUEL CONSUMPTION GPH (LPH) 1.20 (4.54) 1.05 (3.97) 1.60 (6.05) 2.25 (8.52) 2.25 (8.52) 1.68 (6.36) COIL Schedule 80 PUMP Tri-Plunger Belt-Drive Tri-Plunger Belt-Drive Tri-Plunger Belt-Drive Tri-Plunger Belt-Drive Tri-Plunger Direct-Drive Tri-Plunger Belt-Drive PUMP MOTOR HP 1.5 2 2 5 7.5 1.5 Volts/Phase 120V 1ph 120V 1ph 120V 1ph 230V 1ph 230V 1ph / 230V 3ph / 460V 3ph 120V 1ph Total Amperage 18 20 20 20 36 / 27.5 / 14 18 CORD & PLUG 36' w/ GFCI, 20-amp Plug 36' w/ GFCI, 20-amp Plug 36' w/ GFCI, 20-amp Plug 36' w/ GFCI, No Plug 36', No Plug 36' w/ GFCI, 20-amp Plug HOSE 3/8" I.D. x 50', 3000 PSI, Insulated Wire Braid 50' Steam Combination GUN & WAND Insulated Shut-Off Gun with Variable Pressure Wand NOZZLES Hardened Stainless Steel (15°) and Brass (Soap) CHEMICAL CONTROL Downstream Chemical Injection WHEELS 2 Ply Tubed Pneumatic 10" x 4.00" Wide Stance PAINT Epoxy Powder Coating LENGTH/WIDTH/HEIGHT 36" x 26" x 41" 42" x 26" x 41" 36" x 26" x 41" (91cm x 66cm x 104cm) (107cm x 66cm x 104cm) (91cm x 66cm x 104cm) MACHINE WEIGHT Lbs (Kg) 341 (155) 351 (159) 341 (155) 372 (169) 450 (204) / 425 (193) / 425 (193) 343 (156) SHIPPING WEIGHT Lbs (Kg) 410 (186) 390 (176) 390 (176) 440 (200) 565 (256) / 540(245) / 540(245) 395 (179) PRESSURE WASHERS G O L D S E R I E S ® HOT WATER • GASOLINE OR ELECTRIC POWERED • VERTICAL COIL 5-YEAR LIMITED WARRANTY • CERTIFIED TO UL SAFETY STANDARDS • ISO-9001 COMPANY MVP VHW, VHP and VHG MVP3-30321 MVP4-25321 MVP4-30321 MVP4-30321E MVP4-35321E MODEL MVP3-30325 MVP4-25325 MVP4-30325 MVP4-30325E MVP4-35325E DISCHARGE GPM (LPM) 3.0 (11.3) 3.2 (12.1) 3.5 (13.2) 3.5 (13.2) 3.8 (14.4) OPERATING PRESSURE PSI (Bar) Variable to 3000 (207) Variable to 2500 (172) Variable to 3000 (207) Variable to 3000 (207) Variable to 3500 (241) OPERATING TEMPERATURE Ambient to 190°F (88°C)*, Maximum Temperature Rise of 130°F (72°C) BTU PER HOUR 266,000 310,000 336,000 336,000 336,000 BURNER Oil Fired, Automatic Light, 12V DC COIL 1/2" Schedule 80 FUEL TYPE Kerosene, Stove Oil, Diesel FUEL OIL TANK CAPACITY Gal (Liters) 6 (22.7) 6 (22.7) 6 (22.7) 6 (22.7) 6 (22.7) FUEL OIL NOZZLE GPH (LPH) 1.75 (6.6) 1.75 (6.6) 1.75 (6.6) 1.75 (6.6) 1.75 (6.6) PUMP Tri-Plunger Direct-Drive ENGINE 9 HP Honda/Recoil Start 9 HP Honda/Recoil Start 11 HP Honda/Recoil Start 11 HP Honda/Electric Start 13 HP Honda/Electric Start Charging System 18 Amps 18 Amps 18 Amps 18 Amps 18 Amps GASOLINE TANK CAPACITY Gal (Liters) 1.6 (6.1) 1.6 (6.1) 1.7 (6.4) 1.7 (6.4) 1.7 (6.4) HOSE 50' x 3/8"ID 3000 PSI Wire Braid 50' x 3/8"ID 4000 PSI SHUTOFF GUN & WAND Variable Pressure Wand SS VP Wand NOZZLES Hardened Stainless Steel (15°) and Brass (Soap) CHEMICAL CONTROL Downstream Chemical Injection WHEELS 2 Ply Tubed Pneumatic 10" x 4.00" Wide Stance LENGTH/WIDTH/HEIGHT 47" x 26" x 45" (119cm x 66cm x 114cm) MACHINE WEIGHT Lbs (Kg) 390 (177) 390 (177) 400 (181) 400 (181) 400 (181) SHIPPING WEIGHT Lbs (Kg) 480 (218) 480 (218) 490 (223) 490 (223) 490 (223) Note: We are constantly improving and updating our products. Consequently, pictures, features and specifications in this brochure may differ slightly from current models. There may be slight variances in gallonage and pressures due to variances allowed by manufacturers of our machine components. We attempt to keep our machines performance ±5% of listed specifications. This equipment intended for outdoor use only. Customer is responsible for any permits, compliance with codes, or other government requirements associated with the installation, use, or disposal of waste associated with this equipment. *When incoming water temperature is 60° (16°C) FORM #96-003 • 1/2000 • LANDA, INC. • 4275 Pacific Rim Blvd., Camas, Washington 98607 USA DISTRIBUTED BY: WATER CLEANING SYSTEMS ® CLEANING EQUIPMENT TRADE ASSOCIATION MEMBER OF Made in USA REGISTERED www.landa-inc.com World Headquarters SINCE 1969 • CELEBRATING OVER 30 YEARS OF EXCELLENCE VHW SPECIFICATIONS MVP SPECIFICATIONS VHP SPECIFICATIONS VHG SPECIFICATIONS VHW4-20021A MVP4-30321E (Shown with optional stainless steel wrap) PG: The workhorse of cold- water pressure washers PHW: The iron- tough hot-water washer SGHW: Heavy-duty hot- water cleaning muscle SJ Top Load: Parts washer with water-propelled spray bar SJ Front Load: Aqueous parts washer for large parts Water Jet: Hot/cold water rotary surface cleaner SandBlaster: Dust-free cleaning of metal, concrete Swivel Hose Reels: For tangle-free handling Rotary Nozzles: For extra cleaning power Chemicals: Full line of enviro-safe detergents HOT AND COLD WATER PRESSURE WASHERS AUTOMATIC AQUEOUS PARTS WASHERS ACCESSORIES AND PARTS SOLUTIONS OTHER EQUIPMENT FROM LANDA ACCESSORIES FOR PRESSURE WASHERS