Please Save Please Save Please Save Please Save Please Save P P P arts List arts List arts List arts List arts List HOME CARE MONROE BED ASSEMBLY INSTRUCTIONS The nations #1 manufacturer of hospital cribs N1030M ELECTRIC 36" x 72" N2070M ELECTRIC 36" x 83" Revised 5/16/16 Rev 2
This document is posted to help you gain knowledge. Please leave a comment to let me know what you think about it! Share it to your friends and learn new things together.
Transcript
Pleas
e S
ave
Pleas
e S
ave
Pleas
e S
ave
Pleas
e S
ave
Pleas
e S
ave
PPPPPar
ts List
arts List
arts List
arts List
arts List
HOME CARE MONROE BED
ASSEMBLY INSTRUCTIONS
The nations #1 manufacturer of hospital cribs
N1030M ELECTRIC 36" x 72"
N2070M ELECTRIC 36" x 83"
Revised 5/16/16 Rev 2
HOME CARE MONROE BED
Side Curtain Assembly (7)End Curtain Assembly (8)
Head End
Assembly (10)
Slide Rod (6)
7" Innerspring Mattress (9)Side Assembly (1)
Spring Assembly (3)
Side Trigger Assembly (4) 5" Casters (5)
Foot End
Assembly (2)
Staff Control (11)
**Parts, if still available, will be supplied for up to 12 years from date of manufacture of bed.**
Numbers beside part description correspond to photo layout.
Electric Electric
N1030M N2070M
Side Assembly (1) 90414-E 90421-E
End Assembly
Head (10) 90426-E 90426-E
Foot Electric (2) 90424-E 90424-E
Spring Assembly (3) 92555 92557
7" Innerspring Mattress (9) 1973-7 2085-7
Side Trigger Assembly- need 2 per side (4) 89124 89133
The knee section, head section and Hi-Lo on any of the models listed above may be operated
or articulated by pressing the appropriate button on the staff control box or patient hand
control.
The various motors will continue to run for however long you press and hold one of the buttons
on either control. Straight line Trendelenberg may be achieved by raising the bed to its' maximum
height. A button is provided at the top of the foot end assembly and may be pressed just prior
to operating the Hi-Lo "down" function. Straight line reverse Trendelenberg may be achieved in
a similar manner by raising the bed to its' maximum height. A button at the head end assembly
should be engaged just prior to operating the Hi-Lo down function. See pages for detailed
instructions on using the Trendelenberg feature.
**This switch allows you to use the Hand Control
device. When the patient hand control button is on- the
staff control box pictured will not operate the bed.**
Staff Control Box
Patient Hand Control
Staff Control Box (end view)
Multi-functioned Control Box (see Photo Layout)located underneath the crib has 3 designated
connections. Included on one end of control box there is a Staff Control box connector, a patient
hand control connector and an on/off Switch* (on/off switch is equipped for convenient temporary
disconnection). Included on the other end of the control box is the power supply cord and fuse
holder.
Note:
* Switch is not intended as the primary method for turning on and off
power supply.
** Circuit diagrams, electrical components, parts list, descriptions, calibration
instructions are available only to appropriately qualified personnel.
*** Opening Electrical Components will negate HARD’s warranty.
Patient Hand
Control Connector
Staff Control
Connector
On/Off Switch
Staff Control Box (top view)
WARRANTY HARD offers the following warranty terms against defects in materials and workmanship for the items listed below: * Doernbecher Critical Care Crib 5 years
* iCrib Critical Care Crib 5 years
* Springfield Crib 5 years * MoveSafe Stretcher Crib 2 years * Standard Crib 2 years * Cribette or Twin Cribette 2 years * All Youth Beds 2 years * Home Care and Day Care Equipment 2 years * All Mattresses 1 year
Expected Service Life: 9 years
**Parts are available for up to 12 years (subject to part availability) from date of manufacture of crib or bed.**
Anti-Microbial Coating
The coating on this product utilizes the properties of silver to produce a finish with anti-microbial properties. This provides protection against a broad range of micro-organisms such as e-coli, fungus, mildew, salmonella and algae. HARD’s anti-microbial finishes are safe for human contact and remain effective as long as there is a coating on the crib surface. HARD recommends a non-abrasive cleaning solution. General overall cleaning with mild detergent should be applied at least once (1) per year. Placing cribs in cart washers and/or the use of steam spray guns for disinfecting HARD’s products is not recommended. When residual moisture is left on internal mechanisms corrosion may occur. Please follow the infection control policies for your institution for cleaning, disinfecting and decontamination. Chlorine solutions are not recommended for stainless steel products NOTE: HARD products contain no latex.