HOLOPHANE ® ■ Lighting for the commercial, retail and educational environments ■ Proven performance from enclosed prismatic glass ■ Decorative luminaire with improved visual performance and appearance ■ Energy efficient HID lamps and ballasts ■ Variety of shapes and mounting options HL-1310 3/01 Commercial/Retail PrismGlo ®
24
Embed
HOLOPHANE Commercial/Retail PrismGlo - Acuity Brands · 2008-03-31 · photometric test report holophane holophane research & development center newark, ohio 43055 distribution data
This document is posted to help you gain knowledge. Please leave a comment to let me know what you think about it! Share it to your friends and learn new things together.
Transcript
HOLOPHANE®
■ Lighting for the commercial,retail and educationalenvironments
Provide lightingproducts and solutions, giving our customers thegreatest value through superior:• visibility• energy efficiency• reliability• quality• service
Supermarkets
Discount stores
Clothing shops
Hardware stores
Malls
Offices
Libraries
Classrooms
Atheleticfacilities
luminaire’s unique lighting
has been proven in many
successful installations to
improve sales.
Interior design of com-
mercial space continues to
evolve. Open space and
open ceiling offices require
illumination of horizontal
writing surfaces, catalogs,
CRT terminals and charts.
The uplight component
from PrismGlo reflects off
ceilings into offices without
being cut-off by partitions
while the horizontal
component provides the
illumination needed for
exacting visual tasks.
Classrooms and libraries
need illumination
on desks, book racks,
paintings, chalkboards,
bulletin boards, work
benches, cafeteria tables
and auditorium seats.
An extensive choice ofHID lamps and wattagesinclude 50, 70, 100, 150,175, 250 and 400 wattmetal halide, and 70, 100,150 and 400 watt HPS.18 and 26W Quad PLfluorescent, 23W Earthlamp and 150Wincandescent are alsoavailable. Choice ofmountings include re-cessed, surface, pendant,throughway, quickdisconnect, remote andrecessed/remote.
Decorative units inover 170 optional design-er colors complement anydecor.
Athena™ Electra™
Delphic® Hekaton™
Aurora™ Mentor®
HOLOPHANE
4
PrismGlo
1. Variety of mounting options:pendant for DN20NPT (.75”) con-duit, hooks and loops,throughway or ceiling mount box,quick disconnect for fast electricalconnections.
2. White painted attractivehousing blends into whiteceilings. Long life, energyefficient integral ballasts.
3. Stem connection: 76mm (3”)white die cast aluminum isstandard; optional DN20NPSM(.75”) white stem of variouslengths positions optics atoptimum mounting height.
4. Smooth white die castaluminum socket husk withwiring chamber supports glassrefractor.
6. Relamping cover: unobtrusive,oval prismatic plate blends intooptical design, firmly supportedby the refractor yet quicklyremoved for relamping.
Prismatic Glass Refractor■ Proven performance for commercial areas■ Total luminous envi-ronment enhances sale ofmerchandise and spaceappearance■ Six shapes to com-plement retail interiors■ Engineered uplight forhigh vertical footcandles■ Computer designeduplight reduces contrastbetween ceiling andluminaire while enhanc-ing form and texture ofmerchandise■ Wide spreaddownlight for evenhorizontal illumination■ Molded reflecting andrefracting prisms withBlondel flutes provideextremely low side wallbrightness, even 400 wattlamps can be mounted at3m (10’) without objec-tionable glare■ Electrostatically stableborosilicate glass for highand low ambient temper-atures■ Up to 92% efficiency,low energy usage fromclear metal halide andhigh pressure sodiumlamps
3
4
2
1
5
6
BL2C and BL2D■ Modern industrialappearance blendsinto beams, trusses,ducts and supports.Die cast aluminumhousing for long lastingmechanical strength.
■ Inconspicuouswhite housing can bemounted in betweenbeams. Various stemlengths allow only theoptical refractor to bebelow the apparentceiling line.
■ Installation costsare reduced by usingthe quick installmounting plate andfast splice wiringchamber. Positionoriented mountingplate assures allballasts line up in thesame direction.
■ Colors of merchan-dise, books, bulletinboards, signs, wallsand interior will notchange since theprismatic glass refractorwill not discolor due toheat, ultraviolet orinfrared. It will faroutlast plastic refractorswhich can turn brownor melt in three years.
■ The opticalassembly is factoryassembled andprewired to theporcelain enclosedsocket for optimumlight distribution.
■ UL-1598 listed 55°or 65°C damp loca-tion and CSA certified
■ Vibration tested at0.5g to withstand retailand school environ-ments. Balanced
mounting from hooksand loops without fieldadjustment.
■ High power factor(over 90%) copperwound ballast istested and matchedwith capacitors toprovide full lampwattage at lowerenergy consumption.Ballast and capacitorare heat sunk for cooloperation and long life.
■ Optional “N” thru-way and pendantwiring chamberquickly spins ontoDN20NPT (.75”) conduitor can be ceilingmounted. Integralhinge supports forhands-free wiring.Thru-way box can carry up to five 3.4mm(#10 AWG) wires with24 amps per wire.
■ Optional “Q” quickdisconnect powerhanger contains afemale receptacle andterminal block. Thehanger providesthreaded DN20NPT(.75”) conduit entry for pendant and DN20(.75”) knockouts forthru-way wiringcapability. The powerhanger is listed perUL-1059 (TerminalBlocks) and UL-98 (Enclosed and DeadFront Switches)permitting fixture to be disconnected whileunder load. Branchcircuit wiring can beelectrically installed and tested beforeluminaire is in place.
HOLOPHANE5
Integral Ballast
Aurora
Delphic
HOLOPHANE
6
MountingMethods
1. Quick install box: Ballasthousing hinges fromthroughway (or concealed)wiring box for quick laborsaving installation and fastmaintenance.
3. Integral swivel plate: Provides 15° motion in a360°plane for mounting onsloped ceilings of 15° or less.
4. Stem connection: DN20NPSM (.75”) white pipe ofvarious lengths support opticsat specified mounting height.
1. Remote ballast: Heavy duty steel, with whitepolyester paint, housingcontains two wiring chambers,knockouts and integral mount-ing feet.
2. High efficiency electricalcomponents: Low noise,potted, copper wound core andcoil assembly, capacitor, starterboard, and emergency relay de-signed for remote mountingfrom 15m (50’) to 140m (455’)from the luminaire.
3. Canopy: Provides finishedappearance at junction ofceiling tile and stem.
4. Stem connection: DN20NPSM (.75”) white pipe ofvarious lengths support opticsat specified mounting height.
Surface Mounting (BL2A) Recessed Mounting InGrid Ceiling (BL2B)
1. Quick install wiringcover: Predrilled for DN20NPT(.75”) conduit connection,slides on and mates withelectrical splice chamber cover.
2. Die cast aluminumhousing: Corrosion resistantwhite polyester powder paint,UL listed as a recessed non-type IC marked spacing, fixturefor use in 25°C ambients, (seepage 9 for required minimumspacing), energy efficientcopper wound ballast withthermal overload protector.
3. Grid ceiling mountingrails: Positions housing andoptics between tee bar runners.
4. Integral swivel plate:Provides a 15° motion in a 360°plane for sloped ceilings of 15°or less, fast connection to , andsupport of, stem and optical assembly.
5. Canopy: Provides finishedappearance at junction ofceiling tile and stem.
6. Stem connection: DN20NPSM (.75”) white pipe ofvarious lengths support opticsat specified mounting height.
7. Optional quick disconnect: Listed per UL-1059, Terminal Blocks andUL-98, Enclosed and DeadFront Switches, permittingluminaire to be disconnectedwhile under load; branchcircuit wiring can be electricallyinstalled and tested before lu-minaire is in place.
Remote ballast (BL2E,BL2F, BL2G)
1
4
3
2
1
1
2
3
4
34
2
1
5
6
7
HOLOPHANE7
PrismGlo
HOLOPHANE
8
PHOTOMETRIC TEST REPORTHOLOPHANEHOLOPHANE RESEARCH & DEVELOPMENT CENTERNEWARK, OHIO 43055
DISTRIBUTION DATA
ZONALLUMENS
ZONALDEGREES
TOTALEFFIC.
OU TPUT DATATEST OF HOLOPHANEBL2X400MHXXR PRISMGLO ATHENA
PrismGloComplete luminaire shall beHolophane catalog number_________. The luminaire shallconsist of two or three assem-blies: an electrical assemblycontaining the ballast andelectrical components andmounting hardware, an opticalassembly and a stem assembly(for BL2A, BL2B, BL2E, BL2Fand BL2G). The luminaire shallbe UL listed and CSA certified.It shall have passed a .5g accel-erated vibration test.The copperwound ballast shall have inputwatts of _____ with a ballastfactor of 1.
Optical AssemblyThe optical assembly shall beEndural®, prismatic borosilicateglass with reflecting andrefracting prisms. It shall be ofthe _____ design with a _____(curved, triangular or drum) topand a _____ (curved, triangularor drum) bottom. It shall besupported by a die cast,aluminum socket husk with anintegral wiring chamber andkeyed slot for stem attachment.The specified optical assemblyshall be designed to provide auniformly low brightnessappearance and zonal output ofnot less than:
when tested with a ________watt ________ lamp.The luminaire shall have aspacing criteria of____________.
Stem AssembliesDie cast combination fittingsshall be attached to DN20NPSM(.75”) rigid steel pipe to providean electrical enclosure and me-chanical support between theoptical and electrical assem-blies. The stem fitting shall beshipped attached to the integralelectrical assembly. Remoteballasted units shall include adecorative box cover and swivelplate.
The pre-wired, porcelainenclosed lampholder withcorrosion-resistant, nickel platedlamp grip screw shell shall befactory set for optimum lightdistribution.
PaintThe socket husk, stem andballast assembly shall beprotected against corrosion by aseven stage zinc phosphate pre-treatment followed by an elec-trostatically applied polyesterpowder painting and curingprocess.
All exposed hardware shallbe stainless steel or zinc platedsteel for corrosion protection.
Electrical AssembliesSurface Mounted (BL2A)Die cast aluminum housing shallcontain the electrical compo-nents and support the opticaland stem assemblies. A quickinstall box shall be providedfor concealed or throughwaywiring. The integral swivel plateshall allow a +15° motion in a360° plane. It shall be UL 1598listed as suitable for damplocations in 40° C ambients.
Recessed for Grid Ceilings(BL2B)The assembly shall be listed byUL as a recessed non-type I.C.,marked spacing, fixture per UL1598, for use in 25°C ambients.Minimum permitted spacingdimensions shall be 1220mm(48”) between centers ofadjacent fixtures, 50mm (2”)between top of fixture andoverhead building member and610mm (24”) between fixturecenter and sidewall. It shall be adie cast aluminum housing withelectrical components mountedon rails to locate the luminairebetween the grid members. Athermal overload protector shallbe provided. The stem assem-bly and optical refractor shall besupported from an integral platewhich allows the optics toswivel +15°. Wiring optionsshall include a quick disconnect,listed per UL 1059 and UL 98.
Integral Ballast (BL2C, 2D)The die cast aluminum housingshall contain the prewiredballast, electrical components
and stem and provide electricalenclosure and mechanicalattachment for the opticalassembly. It shall be balancedto hang straight when supportedby a hook or loop. The wiringchamber quick install cover shallbe predrilled for DN20NPT(.75”) pipe, shall slide onto andsupport the ballast and optics;and mate with the electricalsplice chamber cover to providepositive support. It shall belisted for 55°C or 65°C ambientdamp location per UL 1598.
Remote Ballast (BL2E, BL2F (with hook), BL2G)The remote ballast shall containthe core/coil ballast, capacitorand starter board, and emergen-cy relay if required. It shall beCSA certified and UL listed asmeeting UL standard number1029 for 40°C ambients. Thisballast is not suitable forrecessed ceiling applications asstandard. The ballast shall becompletely covered with apolyester resin and silica sandcompound for quiet operation.It shall provide 5 knockouts forconduit entry from both top andbottom wiring chambers. Thepolyester powder painted steelhousing shall have a one piecefull access cover, and bothkeyhole and slot mounting.Ballast shall be high powerfactor, over 90% and operateHPS lamps in ambient down to -40°C, Metal Halide lamps downto -20°C. It shall operate thelamp ________ ft. from theballast when using 2.7mm (#12AWG) wire.
Optional Electrical AssemblyMounting MethodsFor BL2B, BL2C or BL2D (choose one)
N - Non-Disconnect Pendantand Throughway WiringThe die cast aluminum integralwiring box shall contain provi-sions for DN20NPT (.75”)conduit, throughway, directceiling or pendant mounting. Itshall contain an integral hingewhich connects with the die castaluminum housing to supportthe luminaire (BL2C/D only)while electrical splices aremade.
It shall have the same corrosionresistant finish as the housing. It shall have 2 cast in sideknockouts (one on each side), 4 ceiling mount drill points,DN20NPT (.75”) conduitthreaded top opening, and becapable of carrying five (#10AWG) conductors for throughwiring.
The housing shall swing upand connect to the ND box bylatching the captive J bolt andwing nut without use of tools.
Q - Quick-Disconnect Pendantand Throughway WiringThe die cast aluminum quickdisconnect wiring box shallcontain provisions for DN20NPT (.75”) conduit,throughway, direct ceiling orpendant mounting. It shallcontain an integral hinge whichconnects with the die castaluminum housing to allow theluminaire to hang free (BL2C/Donly) with electrical disconnect.It shall have the same corrosionresistant finish as the housing.It shall have 2 cast in sideknockouts (each side), 4 ceilingmount drill points, DN20NPT(.75”) conduit threaded topopening, and be capable ofcarrying five #10 AWG conduc-tors for throughway wiring.
The housing shall swing upand connect to the QD box bylatching the captive J bolt andwing nut without the use oftools.
A dead front female recepta-cle shall be mounted inside theQD box which will make anelectrical connection with thepre-wired male plug on thehousing. The groundingconnections shall be the first tomake contact and the last to dis-connect.
It shall be CSA Certified andUL listed per UL 1059 (TerminalBlocks) and UL 98 (Enclosedand Dead Front Switches) per-mitting the fixture to be discon-nected while under load to meetOSHA requirements forrelamping.
HOLOPHANE
10
PrismGlo® Ordering Data®
®
How to construct a catalog number for PrismGlo® — Fixture type ____________
5. Stem length For BL2A, BL2B, BL2E, BL2F, BL2G: ■■ 1 228mm (9”)■■ 2 381mm (15”)■■ 4 503mm (20”)■■ 5 660mm (26”)■■ X Special length, available in increments of 25mm (1”) nominal
For BL2C, BL2D:■■ 3 76mm (3”) shipped attached■■ X Special length, available in increments of 25mm (1”) nominal
6. Options and See pages 11, 20 and 22 accessories
Notes: 1 Not available with 175MH, 250MH or 25LMH2 Available with BL2C/D only3 Available with stems less than 48” in length only
Order number Job name
BL2A CO(optional)
BL2A
Wiringchamber
Optics
VariesVaries
Ceiling
BL2B
Struts mountto T-barmembers
Canopy
Varies
BL2E (Remote ballast)See HL-1039
CanopyCeiling291mm(11.45")
700mm(27.55")
BL2C/D
Athena (R/J)
Aurora (A)
254mm(10")
356mm(14")
279mm(11")
292mm(11.50")
505mm (19.85") 505mm (19.85")
505mm (19.85") 505mm (19.85")
464mm (18.25")
271mm(10.65")
202mm(7.95")
129mm (5.1")
129mm (5.1")
Mentor (M) Delphic (D)
129mm (5.1")
129mm (5.1")
318mm(12")
Electra (E)
129mm (5.1")
Hekaton (C/L/H/W)
129mm (5.1”)
317mm(12.5”)
435mm (17.12”)
HOLOPHANE11
Catalognumber Description
Mounting Options (BL2B, BL2C and BL2D only)■■ Q Quick disconnect power hanger for pendant and thru-way wiring; all fixtures except “-CDP”, “PHCB”, “PF”, “ER”■■ N Non-disconnect, pendant and thru-way wiring
Options (BL2C and BL2D only)■■ PF-105 Loop, DN20NPT (.75”) male; all fixtures except “Q”■■ PF-121 Safety hook, DN20NPT (.75”) male; all fixtures except “Q”■■ PF-129 Anti-rotational hook, DN20NPT (.75”) male; all fixtures except “Q”■■ PF-291 Universal Gasketed Hook Assemlby, 3/4” male. Not available with Q.■■ PHCB (120, 208, 240, Power-hook cord, special configuration plug cap and “PF-105” loop attached
277, 347V) (use with “UPH-35-XXX-WH” or “UPH-36-XXX-WH”); all fixtures except “MT”, “-ER”, or “Q”■■ PHCB-L8-480 (480V) Power-hook cord, special configuration plug cap and “PF-105” loop attached (use with
“UPH-35-L8-480-WH” or “UPH-36-L8-480-WH” on 480 volt units only); all fixtures except “-ER” or “Q”■■ CD-3 Cord only; for length longer than 6 ft handle through TSG.■■ CD-4 Cord only; for length longer than 6 ft handle through TSG.■■ CD-5 Cord only; for length longer than 6 ft handle through TSG.■■ CD-6 Cord only; for length longer than 6 ft handle through TSG.■■ -CDP-L5-15-3 (120V) 120V 914mm (3’), three conductor cord and NEMA plug (order “PF” also)■■ -CDP-L6-15-3 (208/240V) 208/240V 914mm (3’), three conductor cord and NEMA plug (order “PF” also)■■ -CDP-L7-15-3 (277V) 277V 914mm (3’), three conductor cord and NEMA plug (order “PF” also)■■ -CDP-L24-20-3 (347V) 347V 914mm (3’), three conductor cord and NEMA plug (order “PF” also)■■ -CDP-L8-20-3 (480V) 480V 914mm (3’), three conductor cord and NEMA plug (order “PF” also)■■ -X Cord length beyond .914mm (3’) (X = no. of feet)■■ HFW Holoflex® flexible wiring system (see HL-992) - Not available in Canada■■ AERS-35/AERS-50 For BL2C only. Automatic Energy Reduction System. 25LHP, 40LHP, 25LMH, and 40LMH
(energy saving ballast) units only. 25LMH and 40LMH available with AERS-50 only. Available with “-EM” on AERS-50 only. Not available with “ER”.
(included) to provide standby lighting. Includes internal relay to switch quartz lamp when temporary powerfailure extinguishes HID lamp.
■■ -ER Emergency lighting fixture less relay for use with a 120 volt external power source to operate a D.C. 250W max.bayonet tungsten halogen lamp (included) to provide emergency lighting.
■■ -F1 Single fuse assembly for 120, 240, 277, or 347 volt (Not available with BL2E)■■ -F2 Double fuse assembly for 208, 240, or 480 volt (Not available with BL2B or BL2E)■■ PS HPS protected starter (see HL-838). Not available on BL2E units or stem lengths over 1.2m (4’)■■ -09160-X Safety chain for BL2A, BL2B, BL2C, and BL2D. Insert length of chain in feet for X. .914m (3’) is standard
length.■■ R1 Plastic Relamp Plate. Available with D, J, M and R Optic styles.■■ R2 Plastic Relamp Plate. Available with A and E Optic styles.
For BL2C and BL2D only■■ PF-105-B Loop, DN20NPT (.75”) male; not available with “Q”■■ PF-116-A Loop, DN20NPT (.75”) female; not available with “Q”■■ PF-121-A Safety hook, DN20NPT (.75”) male; not available with “Q”■■ PF-122-A Safety hook, DN20NPT (.75”) female; not available with “Q”■■ PF-129-A Anti-rotational hook, DN20NPT (.75”) male; not available with “Q”■■ UPH-35-XXX-WH Thru-way power-hook (order “PHCB” with fixture); all fixtures except “MT”, “-ER”, or “Q”.
(120, 208, 240, 277, 347V) Insert voltage for XXX.■■ UPH-35-L8-480-WH (480V) Thru-way power-hook (order “PHCB-L8-480” with fixture); all fixtures except “-ER” or “Q”■■ UPH-36-XXX-WH Pendant power-hook (order “PHCB” with fixture); all fixtures except “MT”, “-ER”, or “Q”.
(120, 208, 240, 277, 347V) Insert voltage for XXX.■■ UPH-36-L8-480-WH (480V) Pendant power-hook (order “PHCB-L8-480” with fixture); all fixtures except “-ER” or “Q”
Accessories (shipped separately)■■ -LAMP Appropriate HID lamp supplied with fixture■■ -F1 Single fuse assembly for 120, 240, 277, or 347 volt (BL2E only)■■ -F2 Double fuse assembly for 208, 240, or 480 volt (BL2E only)■■ -BL2A-CO Decorative ballast cover for BL2A units only.■■ -09205 Plastic relamp plate for Athena, Mentor, Delphic■■ -09206 Plastic relamp plate for Aurora, Electra
Note: For applications where the luminaire may be subject to impact, the plastic relamp plate is required.
PrismGlo Options and Accessories
Double Chandelier (Extrusion)Custom color shown
HOLOPHANE
12
EnhancedPrismGlo
Four Rod PendantCustom color shown
Wall Mount Custom color shown
®
®
Quad Chandelier (Rods)Custom color shown
HOLOPHANE13
How to construct a catalog number for Enhanced PrismGlo — Fixture type
EXAMPLE: BL2H — 400MH — 12 — R — 6 Fill in — — — — 1 2 3 4 5 catalog no. 1 2 3 4 5
Step Catalog no. Description
1. Luminaire ■■ BL2H Enhanced PrismGlo/Remote Ballast. Standard color is white*
■■ 26 Rods, special stem length■■ 27 Extrusion, special stem length
Options ■■ -C Decorative cord - four pendant mounting assembly only ■■ -EM Standby lighting fixture uses a D.C. 250W max bayonet base,
tungsten halogen lamp (included) to provide standby lighting. Includes internal relay to switch quartz lamp when temporary power failure extinguishes HID lamp.
■■ -ER Emergency lighting fixture less relay for use with a 120 volt external power source to operate a D.C. 250W max. bayonet tungsten halogen lamp (included) to provide emergency lighting.
* Consult Holophane Sales Representative for custom colors
Order number___________________ Job name___________________
Enhanced PrismGlo Ordering Data
WeightsWall 16kg (35 lbs)Pendant 18kg (40 lbs)
®
®
HOLOPHANE
14
PrismGlo
HOLOPHANE15
CompactPrismGlo
Integral
Recessed Remote BallastCSA certified and UL listed drylocation
1. UL 1029 and 935 40°Clisted ballast for remote mount-ing and recessing in gridceilings with positioning legs,knockouts, ballast wiringchamber and optical supportbox.
2. Octagonal box with opticalswivel support bracket andwiring chamber.
3. Decorative cover finishesoff hole in ceiling tile.
4. Stem connection: 10mm (.38”) white pipe ofvarious lengths positions opticsat specified mounting height.The stem and optics are CSAcertified and listed per UL 1598for damp location.
6. Refractor: low brightnessprismatic glass refractor withwide spacing criteria and 55 or 60% downlight.
Integral Ballast
1. Variety of mounting options,pendant for DN20NPT (.75”)conduit, hooks and loops, orceiling mount.
2. Die cast aluminum housing:corrosion resistant white polyes-ter powder finish, UL listed40°C, dry locations, CSAcertified and energy efficientcopper wound ballast.
3. Die cast aluminum opticalsupport cover with corrosionresistant white polyesterpowder finish.
4. Stem connection: 10mm (.38”) white pipe ofvarious lengths positions opticsat specified mounting height.The stem and optics are CSAcertified and listed per UL 1598for damp location.
5. Slide on socket cover overrelamping cable, socket huskand twist/turn support castings.
6. Refractor: low brightnessprismatic glass refractor withwide spacing criteria and 55 or 60% downlight.
Recessed Remote
1
2
3
4
5
6
1
6
5
4
3
2
HOLOPHANE
16
PHOTOMETRIC TEST REPORTHOLOPHANEHOLOPHANE RESEARCH & DEVELOPMENT CENTERNEWARK, OHIO 43055
DISTRIBUTION DATA
ZONALLUMENS
ZONALDEGREES
TOTALEFFIC.
OUTPUT DATATEST OF HOLOPHANEPAB17DMHXXJ COMPACT PRISMGLO Athena
A decorative ceiling box covershall be factory attached to thestem assembly. The pre-wired,porcelain enclosed lampholderwith corrosion-resistant, nickelplated lamp grip screw shellshall be factory set foroptimum light distribution.
Electrical AssemblyRecessed/Remote: Therecessed/remote electricalassembly shall contain theballast, thermal overloadprotectors, wiring chamber andstem mounting box. It shall belisted per UL 1029 and 935both as a remote ballast and aballast for recessed gridceilings in 40°C, dry ambients.The .76mm (22 gauge) steelhousing shall contain 3 knock-outs on each side, grid ceilingpositioning feet, a quick installsteel cover, and hanger wiresupport holes. The factoryattached optical mounting boxshall provide a hook to allowswivel of the optical assembly.The ballast shall operate a_____ watt _____ medium base(HPS or MH), compactfluorescent, White Son lamp,or incandescent lamp. Theballast will operate the HIDlamp from a maximum of_____ feet between lamp andballast with lamp wattageregulation of _____ % linevoltage regulation.
The socket canopy, stemand ballast shall be protectedagainst corrosion by a sevenstage zinc phosphate pretreat-ment followed by an electro-statically applied polyesterpowder paint and curingprocess.
UL listed options shallinclude standby lighting andemergency lighting withintegral relay and tungstenhalogen lamp, hidden safetycable, remote ballast mountingbrackets and fusing.
Optics With Integral BallastThe luminaire shall consist ofan optical assembly which isattached to an integral ballast
housing. It shall have passed.5g accelerated fatiguevibration test and shall be UL1598 listed for 40°C damplocations and CSA certified. Itshall be balanced withoutexternal adjustment whensupported by hooks or loops.
Optical AssemblyThe optical assembly shall beEndural, prismatic borosilicateglass with reflecting andrefracting prisms. It shall be ofthe _____ design with a _____(curved, drum or triangular)top and _____ (curved, drum,or triangular) bottom. A spunon band shall providedecorative relief andpermanent support of therefractors. The specifiedoptical assembly shall bedesigned to provide auniformly low brightnessappearance and zonal outputof not less than:
Zonal % Total Degrees Lamp Lumens0-60°60-90°0-90°90-180°
when tested with a _____ watt_____ lamp. The luminaire shall have aspacing criteria of_____________.
A die cast bracket shall beattached to the 10mm (.38”)rigid steel tube to provide anelectrical enclosure and mechanical support betweenthe optical and electricalassemblies. Three key- holescrew slots shall provide fastattachment of the optics to theprewired stem and socketassembly. The stainless steelrelamping cable shall behidden by the socket canopy.The stem assembly shallinclude a factory prewired non-corroding porcelain enclosed,nickel plated lamp grip socket
which is preset for thespecified optical assembly. Itshall be attached to the ballasthousing by threading into thecast aluminum decorativebottom closure.
Ballast AssemblyThe die cast aluminumhousing shall incorporate awiring chamber for 90°C wire,threaded entry for DN20NPT(.75”) conduit entrance withlocking screw, HID ballastprewired to wiring chamberand have a corrosionresistant, white, baked onpolyester powder paint, overa seven stage pretreatmentprocess. The cast aluminumdecorative bottom closureshall support the opticalassembly after contractorwiring and attachment to thehousing.
The ballast shall operate a_____ watt _____ mediumbase (HPS or MH) lamp withlamp wattage regulations of_____ % at _____ % linevoltage regulation. It shallhave a minimum ambientstarting temperature of_____°C.
UL listed options shallinclude standby lighting andemergency lighting withintegral relay and tungstenhalogen lamp, fusing, ceilingmounting kit, hooks, loops,power hooks and chain.
The physical properties of theHolophane PrismGlo and CompactPrismGlo Series luminaires representtypical average values obtained inaccordance with accepted test methodsand are subject to normalmanufacturing variations. They aresupplied as a technical service and aresubject to change without notice.Check with your local Holophane salesrepresentative to assure currentinformation.
Complete luminaire shall beHolophane catalog number__________. The luminaireshall consist of an electricalassembly containing the ballastand an optical assembly andstem. It shall have passed a.5g accelerated vibration testand shall be UL 1598 listed for40°C damp or dry locationsand CSA certified.
Suspended Optics With Re-cessed/Remote BallastOptical AssemblyThe optical assembly shall beEndural®, prismatic borosilicateglass with reflecting and refract-ing prisms. It shall be of the_____ design with a _____(curved, drum or triangular) topand _____ (curved, drum, ortriangular) bottom. A spun onband shall provide decorativerelief and permanent support ofthe refractors. The specifiedoptical assembly shall bedesigned to provide auniformly low brightnessappearance and zonal output ofnot less than:
Zonal % Total Degrees Lamp Lumens0-60°60-90°0-90°90-180°
when tested with a _____ watt_____ lamp. The luminaire shall have aspacing criteria of_____________.
A die cast bracket shall beattached to the 10mm (.38”)rigid steel tube to provide anelectrical enclosure and mechanical support betweenthe optical and electricalassemblies. Three key- holescrew slots shall provide forfast attachment of the optics tothe prewired stem and socketassembly. The stainless steelrelamping cable shall behidden by the socket canopy.
HOLOPHANE
18
How to construct a catalog number for Compact PrismGlo — Fixture type_________________
■■ 15DHP 150W HPS ■■ 50DMH 50W MH ■■ 70DMH 70W MH ■■ 10DMH 100W MH ■■ 15DMH 150W MH, not available for 347V ■■ 17DMH 175W MH
For PAB only■■ 50DWS 50W HPS,
White SON2 lamp, 120 volt only■■ 10DWS 100W HPS,
White SON2 lamp, 120 volt only■■ 18QFL 18W Quad fluorescent■■ 26QFL 26W Quad fluorescent■■ 23EFL 23W Earth light fluorescent, 120 volt. NA for Mentor■■ 15DIN 150W incandescent, 120 volt only
3. Voltage For PAB onlySee HL-301 ■■ 12 120 voltfor electrical ■■ 27 277 voltcharacteristics ■■ 34 347 volt (Canada)
For PAC only■■ 12 120 volt■■ 20 208 volt■■ 24 240 volt■■ 27 277 volt■■ 34 347 volt (Canada)■■ 48 480 volt■■ MT Multi-voltage for 120, 208, 240, and 277 volt
4. Optic style ■■ J Athena PrismGlo, 45% light up, 55% down■■ A Aurora PrismGlo, 40% light up, 60% down■■ D Delphic PrismGlo, 45% light up, 55% down■■ E Electra PrismGlo, 45% light up, 55% down■■ M Mentor PrismGlo, 40% light up, 60% down
5. Stem length ■■ 1 127mm (5")■■ 2 381mm (15")■■ X Special length (available in increments of
25mm (1”) nominal)
6. Options and See page 19 and 20 accessories
Notes: 1 All HID lamps are medium base socket2 Trademark of Philips Lighting Company
Order number___________________ Job name___________________
CompactPrismGlo
Ordering Data
Electra™(E)
273mm(10.75”)
330mm(13”)
Aurora™(A)
254mm(10”)
Athena™(J)
254mm(10”)
Delphic ® (D)
235mm(9.25”)
330mm(13”)
PAB mounting603mm (23.75”)L x 146mm (5.75”)Wx 121mm (4.75”)H
50-150 Metal halide 1.2m (4’)175 Metal halide For 1.9mm (14 GA) wire, 56m (185’)
70-150 High pressure sodium 4.2m (14’)
50 & 100 White SON 381mm (15”)18 Compact fluorescent For 1.3mm (18 GA) wire, 10.6m (35’)
Weight: 5kg (11 lbs) - 14 kg (30lbs)
HOLOPHANE19
Catalognumber Description
Options (PAB only)■■ -EM Standby lighting fixture uses a D.C. bayonet base, tungsten halogen lamp included to provide standby
lighting, includes internal relay to switch quartz lamp when temporary power failure extinguishes HID lamp. 100W tungsten halogen lamp is supplied for 10DHP, 10DMH, 50DWS, and 10DWS; 150W tungsten halogen lamp is supplied for 15DHP, 15DMH, and 17DMH. All fixtures except 50DMH, 70DMH, 70DHP, 18QFL, 26QFL, 23EFL, and 15DIN.
■■ -ER Emergency lighting fixture less relay for use with a 120 volt external power source to operate a D.C. bayonet tungsten halogen lamp to provide emergency lighting. 100W tungsten halogen lamp is supplied for 10DHP, 10DMH, 50DWS, and 10DWS; 150W tungsten halogen lamp is supplied for 15DHP, 15DMH, and 17DMH. All fixtures except 50DMH, 70DMH, 70DHP, 18QFL, 26QFL, 23EFL and 15DIN.
■■ N Remote mounting brackets; all fixtures except 15DIN.■■ C Hidden safety cable for optical assembly.
Options (PAC only)■■ -EM Standby lighting fixture uses a D.C. bayonet base, tungsten halogen lamp included to provide standby
lighting, includes internal relay to switch quartz lamp when temporary power failure extinguishes HID lamp. All fixtures except 50DMH.
■■ -ER Emergency lighting fixture less relay for use with a 120 volt external power source to operate a D.C. bayonet tungsten halogen lamp to provide emergency lighting. All fixtures except 50DMH, “-CDP” or “PHCB”.
277, 347V) (use with “UPH-35-XXX-WH” or “UPH-36-XXX-WH”); all fixtures except “MT” and “-ER”■■ PHCB-L8-480 (480V) Power-hook cord, special configuration plug cap and “PF-105” loop attached
(use with “UPH-35-L8-480-WH” or “UPH-36-L8-480-WH” on 480 volt units only); all fixtures except “-ER”■■ -CDP-L5-15-3 (120V) 120V 914mm (3’), three conductor cord and NEMA plug (order “PF” also);
all fixtures except “-ER” and “MT”■■ -CDP-L6-15-3 (208/240V) 208/240V 914mm (3’), three conductor cord and NEMA plug (order “PF” also);
all fixtures except “-ER” and “MT”■■ -CDP-L7-15-3 (277V) 277V 914mm (3’), three conductor cord and NEMA plug (order “PF” also); all fixtures
except “-ER” and “MT”■■ -CDP-L24-20-3 (347V) 347V 914mm (3’), three conductor cord and NEMA plug (order “PF” also)■■ -CDP-L8-20-3 (480V) 480V 914mm (3’), three conductor cord and NEMA plug (order “PF” also); all fixtures except “-ER”■■ HFW Holoflex® flexible wiring system (see HL-992)
Accessories (PAB only - shipped separately)■■ -LAMP Appropriate HID lamp supplied with fixture■■ -F1 Single fuse assembly for 120, 277 and 347 volt
Accessories (PAC only - shipped separately)■■ -LAMP Appropriate HID lamp supplied with fixture■■ -F1 Single fuse assembly for 120, 240, 277, or 347 volt; fuses are factory installed when ordered
with “-CDP” or “PHCB”■■ -F2 Double fuse assembly for 208, 240, or 480 volt; fuses are factory installed when ordered
with “-CDP” or “PHCB”■■ CE Ceiling mounting kit■■ PF-104-B Hook, DN20NPT (.75”) male■■ PF-105-B Loop, DN20NPT (.75”) male■■ PF-116-A Loop, DN20NPT (.75”) female■■ PF-121-A Safety hook, DN20NPT (.75”) male■■ PF-122-A Safety hook, DN20NPT (.75”) female■■ PF-129-A Anti-rotational hook, DN20NPT (.75”) male■■ UPH-35-XXX-WH Thru-way power-hook (order “PHCB” with fixture); all fixtures except “MT” and “-ER”.
(120, 208, 240, 277, 347V) Insert voltage for “XXX.”■■ UPH-35-L8-480-WH (480V) Thru-way power-hook (order “PHCB-L8-480” with fixture); all fixtures except “-ER”■■ UPH-36-XXX-WH Pendant power-hook (order “PHCB” with fixture); all fixtures except “MT” and “-ER”.
(120, 208, 240, 277, 347V) Insert voltage for “XXX.”■■ UPH-36-L8-480 (480V) Pendant power-hook (order “PHCB-L8-480” with fixtures); all fixtures except “-ER”■■ -09189-X Safety chain to ballast housing. Insert length of chain in feet for X. Three feet is standard length.
CompactPrismGlo
Options and Accessories
HOLOPHANE
20
Options and Accessories
PrismGlo
Holoflex® wiringA modular single or threephase wiring system thatprovides flexibility inlayout, quick installationand lower installed cost
HFW
Three circuit power distributions
Thru-way UPH-35 Mounting Detail UPH-35 Pendant UPH-36
88mm (.31”) x 10mm (.38”)ceiling mounting (2) places
110mm(4.31”)
DN20NPT (.75”)threaded entry
22mm (.88”)
(2) wiring accesscovers
(2) KO’s forDN20 (.75”)conduit
120mm(4.88”)
130mm(4.94”)
30mm(1.06”)
110mm(4.5”)
Decorativeballast cover
BL2A - CO (BL2A units only)
57mm(2.25”)
PF-105-BMalleable ironLoopDN20NPT (.75”) male
PF-129-AMalleable ironAnti-rotational hookDN20NPT (.75”) male
73mm(2.88”)
67mm(2.63”)
71mm(2.78”)
45mm(1.75”)
PF-121-AMalleable ironSafety hook DN20NPT (.75”) male
12 Volt or 24 Volt Low VoltageDC Control Wiring(Class II)
Line Voltage Feeds
Holoflex orConduit Power Distributionand AERS Control
AERS-AC ControlModule
Distribution PanelFor additional information see HL-1161
Sensor Locations
PrismGlo
“Q” series, fuse holderis standard.
“N” or “thru-wire”series, fuses are available but will beshipped as a kit forfield installation.
Mounting and fusing (See page 11)
AERS® Option(See page 11)The standard Holophane luminaire is designed with amodified ballast and relay.The modified ballast is designed to operate thelamp at two input wattages:HPS, normal input like astandard luminaire, and areduced input, either 35%or 50% of full input. Metalhalide, normal input and areduced input of 50%. Therelay is wired to an occu-pancy sensor (or some typeof contact closure) througha control module allowingthe luminaire to switchbetween the two input watt-ages. The relay signals theballast which input wattageto supply the lamp at anytime.
“P” standard pendantseries, fuse holder isattached to splice boxcover (shown above).
“Q” series,single fuse “F1”available for 120, 240, 277and 347V; double fuse“F2” available for 208, 240and 480V.
HolophaneA Division of National Service Industries, Inc.
214 Oakwood Ave., Newark, OH 43055 / HolophaneCanada, Inc. 9040 Leslie Street, Units 8 and 9,Richmond Hill, ON L4B 3M4 / Holophane EuropeLimited, Bond Ave., Milton Keynes MK1 1JG,England./ Unique Lighting Solutions, 13/30 HeathcoteRoad, Moorebank, NSW 2170 Australia/ Holophane,S.A. de C.V., Apartado Postal No. 986, Naucalpan deJuarez, 53000 Edo. de Mexico
Contact your local Holophane salesrepresentative for application assistance, andcomputer-aided design and cost studies. Forinformation on other Holophane products andsystems, call the Customer Service Center at740- 345-9631. In Canada call 905-707-5830 orfax 905-707-5695.
Limited Warranty and Limitation of LiabilityRefer to the Holophane limited materialwarranty and limitation of liability on thisproduct, which are published in the “Terms andConditions” section of the current priceschedule, and is available from our localHolophane sales representative.
PrismGlo, Compact PrismGlo and remote ballastsare covered by the following patents: