MITSUBISHI ELECTRIC FACTORY AUTOMATION System and Process Visualisation /// Touch Screen and Key Operation /// Powerful Maintenance Tools /// PLC Program Display /// Direct MES Integration /// HMIs /// GOTs /// IPCs /// SCADA /// Software /// HMI Visualisation Tools Powerful Communication Simple Words and Pictures
68
Embed
HMI Broschüre 2008 UK - Automation Products Family.pdf · HMI solution allows data to be gathered from various FA devices and facilitates its access as information using powerful
This document is posted to help you gain knowledge. Please leave a comment to let me know what you think about it! Share it to your friends and learn new things together.
Transcript
Global partner. Local friend.
MITSUBISHIELECTRIC
FACTORY AUTOMATION
MITSUBISHIELECTRIC
FACTORY AUTOMATION
System and Process Visualisation /// Touch Screen and Key Operation ///Powerful Maintenance Tools /// PLC Program Display /// Direct MESIntegration /// HMIs /// GOTs /// IPCs /// SCADA /// Software ///
HMIVisualisation Tools
Powerful CommunicationSimple Words and Pictures
Mitsubishi Electric Europe B.V. /// FA - European Business Group /// Gothaer Straße 8 /// D-40880 Ratingen /// GermanyTel.: +49(0)2102-4860 /// Fax: +49(0)2102-4861120 /// [email protected] /// www.mitsubishi-automation.com
Specifications subject to change /// Art. no. 207075-B /// 06.2008All trademarks and copyrights acknowledged.
EUROPEAN BRANCHES
CZECH REPUBLICMITSUBISHI ELECTRIC EUROPE B.V.Radlicka 714/113 aCZ-158 00 Praha 5Phone: +420 251 551 470
FRANCEMITSUBISHI ELECTRIC EUROPE B.V.25, Boulevard des BouvetsF-92741 Nanterre CedexPhone: +33 (0)1 / 55 68 55 68
GERMANYMITSUBISHI ELECTRIC EUROPE B.V.Gothaer Straße 8D-40880 RatingenPhone: +49 (0)2102 / 486-0
IRELANDMITSUBISHI ELECTRIC EUROPE B.V.Westgate Business Park, BallymountIRL-Dublin 24Phone: +353 (0)1 419 88 00
ITALYMITSUBISHI ELECTRIC EUROPE B.V.Viale Colleoni 7I-20041 Agrate Brianza (MI)Phone: +39 039 / 60 53 1
SPAINMITSUBISHI ELECTRIC EUROPE B.V.Carretera de Rubí 76-80E-08190 Sant Cugat del Vallés (Barcelona)Phone: 902 131121 // +34 935653131
UKMITSUBISHI ELECTRIC EUROPE B.V.Travellers LaneUK-Hatfield, Herts. AL10 8XBPhone: +44 (0)1707 / 27 61 00
EUROPEAN REPRESENTATIVES
AUSTRIAGEVAWiener Straße 89AT-2500 BadenPhone: +43 (0)2252 / 85 55 20
Simple configurationAll of the HMI software packages come withpre-defined graphic libraries to help users get startedquickly. Some of the software programs also have sim-ulators so that system operation can be checkedbefore downloading into an HMI or IPC.
Easier operationSimple intuitive keyboards are complimented by flexi-ble and dynamic touch screen solutions. Each type ofHMI solution allows data to be gathered from variousFA devices and facilitates its access as informationusing powerful graphic and text tools.
Reliable and economicalUltra slim mounting as well as optional screen orienta-tion make Mitsubishi HMI’s simple and economical toadd to almost any system. Conformance to shippingapprovals and standards are a clear demonstration ofMitsubishi’s commitment to quality.
High resolution screens offer brightclear displays that can be viewed froma wide range of angles.
Advanced screen design softwaresuch as GT Designer 2 enablescreens to be quickly and efficientlycreated.
100’s of drivers are available forconnection to Mitsubishi or otherthird party products.
High-speed operation thanks tofast processors.
Flexible operation allows MitsubishiHMIs to be used in industrial andcommercial applications.
Units with high IP ratings ensure easyand carefree cleaning, especiallyuseful for situations that require fullwash downs.
More design freedom through flexibleconnectivity and mounting as manyunits can be used in portrait orlandscape configurations.
More than a terminalWith innovative technology Mitsubishi Electric hascreated new standards in operator interaction. Fea-tures such as the ladder monitoring function enhanceand support the work of programmers, operators andmaintenance staff.
Intelligent designHigh performance, market leading, operator terminalsare the result of intelligent yet carefully planneddesign. For example front mounted USB ports makeprogramming and data access simpler and quickerthan ever before.
Advanced communicationDirect Connection to a SQL database through a dedi-cated MES interface gives users greater access to oper-ational data from across their entire plant – and allfrom the shop floor.
Simple configurationAll of the HMI software packages come withpre-defined graphic libraries to help users get startedquickly. Some of the software programs also have sim-ulators so that system operation can be checkedbefore downloading into an HMI or IPC.
Easier operationSimple intuitive keyboards are complimented by flexi-ble and dynamic touch screen solutions. Each type ofHMI solution allows data to be gathered from variousFA devices and facilitates its access as informationusing powerful graphic and text tools.
Reliable and economicalUltra slim mounting as well as optional screen orienta-tion make Mitsubishi HMI’s simple and economical toadd to almost any system. Conformance to shippingapprovals and standards are a clear demonstration ofMitsubishi’s commitment to quality.
High resolution screens offer brightclear displays that can be viewed froma wide range of angles.
Advanced screen design softwaresuch as GT Designer 2 enablescreens to be quickly and efficientlycreated.
100’s of drivers are available forconnection to Mitsubishi or otherthird party products.
High-speed operation thanks tofast processors.
Flexible operation allows MitsubishiHMIs to be used in industrial andcommercial applications.
Units with high IP ratings ensure easyand carefree cleaning, especiallyuseful for situations that require fullwash downs.
More design freedom through flexibleconnectivity and mounting as manyunits can be used in portrait orlandscape configurations.
More than a terminalWith innovative technology Mitsubishi Electric hascreated new standards in operator interaction. Fea-tures such as the ladder monitoring function enhanceand support the work of programmers, operators andmaintenance staff.
Intelligent designHigh performance, market leading, operator terminalsare the result of intelligent yet carefully planneddesign. For example front mounted USB ports makeprogramming and data access simpler and quickerthan ever before.
Advanced communicationDirect Connection to a SQL database through a dedi-cated MES interface gives users greater access to oper-ational data from across their entire plant – and allfrom the shop floor.
32
Ultra-slim designs occupy lesspanel space/depth.
Vision1000 – A Complete Line
Interfaces between human and technology /// A complete line /// Interfaces between human and technology /// A complete line /// Interfaces between human and technology
This combination of three visualizationtechnologies from a single manufacturer,allows users to choose the best solution tofit their requirements.
Dedicated HMI solutions
The GOT1000 series of graphic operatorterminals provide the very latest intouch-screen display technology. Thisgives users a bright clear display of infor-mation with the flexibility of touch screeninput.
The GOT units are designed for fundamen-tal integration with Mitsubishi automationtechnology. This means easier, faster pro-ject development as well as increased sys-tem performance and additional access tocore functions in Mitsubishi’s automationhardware.
Factory automation users want more trans-parency and more information on controland machine processes.
In countless applications highly flexibleHMI and IPC units are an intelligent,cost-effective alternative to bulky controlconsoles. Both their size and their manyapplication advantages make them theclearly superior choice.
Open HMI solutions
The E1000 range of HMIs is designed andbuilt on the latest open technology com-bining Microsoft’s Windows CE platformwith Intel Xscale processors.
This leading edge technology delivers fastand reliable operation ensuring maximumuptime for HMI users.
Industrial PC (IPC) solutions
Mitsubishi’s range of IPC1000 solutionsoffer customers a robust platform fordeveloping their own solutions.They aredesigned to provide the flexibility of high-performance PC power but with a sturdyindustrial design to protect them duringoperation. This means users can install anIPC1000 in their manufacturing environ-ment with complete confidence.
Flexible softwaresolutionsA range of Mitsubishi automation softwarecalled MELSOFT supports the IPCs. Thisprovides users with a choice of softwarecomponents that they can embed intotheir own solution or complete visualiza-tion packages such as MX4SCADA.
In addition there are software supportpackages for each of the HMI terminals.They offer libraries of predefined functionsand images as well as an intuitive and flexi-ble work environment.
A wide range of open HMI solutions
The GOT 1000 series utilises the latest touchscreentechnology
High performance industrial PCs
4 5
Central storage and control of FA device information with Mitsubishi HMIs
The complete product range of the GOT series
The complete product range of the E series
MELSOFT is a wide range of software solutionsdesigned to optimize your plant productivity.
Vision1000 – A Complete Line
Interfaces between human and technology /// A complete line /// Interfaces between human and technology /// A complete line /// Interfaces between human and technology
This combination of three visualizationtechnologies from a single manufacturer,allows users to choose the best solution tofit their requirements.
Dedicated HMI solutions
The GOT1000 series of graphic operatorterminals provide the very latest intouch-screen display technology. Thisgives users a bright clear display of infor-mation with the flexibility of touch screeninput.
The GOT units are designed for fundamen-tal integration with Mitsubishi automationtechnology. This means easier, faster pro-ject development as well as increased sys-tem performance and additional access tocore functions in Mitsubishi’s automationhardware.
Factory automation users want more trans-parency and more information on controland machine processes.
In countless applications highly flexibleHMI and IPC units are an intelligent,cost-effective alternative to bulky controlconsoles. Both their size and their manyapplication advantages make them theclearly superior choice.
Open HMI solutions
The E1000 range of HMIs is designed andbuilt on the latest open technology com-bining Microsoft’s Windows CE platformwith Intel Xscale processors.
This leading edge technology delivers fastand reliable operation ensuring maximumuptime for HMI users.
Industrial PC (IPC) solutions
Mitsubishi’s range of IPC1000 solutionsoffer customers a robust platform fordeveloping their own solutions.They aredesigned to provide the flexibility of high-performance PC power but with a sturdyindustrial design to protect them duringoperation. This means users can install anIPC1000 in their manufacturing environ-ment with complete confidence.
Flexible softwaresolutionsA range of Mitsubishi automation softwarecalled MELSOFT supports the IPCs. Thisprovides users with a choice of softwarecomponents that they can embed intotheir own solution or complete visualiza-tion packages such as MX4SCADA.
In addition there are software supportpackages for each of the HMI terminals.They offer libraries of predefined functionsand images as well as an intuitive and flexi-ble work environment.
A wide range of open HMI solutions
The GOT 1000 series utilises the latest touchscreentechnology
High performance industrial PCs
4 5
Central storage and control of FA device information with Mitsubishi HMIs
The complete product range of the GOT series
The complete product range of the E series
MELSOFT is a wide range of software solutionsdesigned to optimize your plant productivity.
6 7
GOT1000 – The Next Generation’s Vision
GOT HMI's can help users see what is happening anywhere in their process.
PowerfultechnologyThe GOT1000 series has been designedwith the needs of the user in mind. Forexample:
Diagnostics functions
The GOT1000 series’ innovative errorreporting system ensures fast trouble-shooting and minimum downtime. Prede-fined screens provide direct access to thePLCs I/Os and even the buffer memory ofspecial-function modules.
Features such as alarm handling, historicaltrending and memory areas for storinghelp texts or bitmaps also contribute torapid troubleshooting and fault correction.
Transparent Mode
GOT1000 units can also allow users todownload programs to the connectedMitsubishi PLC through the existing con-nection established with the GOT displayunit.
Flexible program storage
The GOT units can be programmed withthe GT Works2 software package, whichruns on any Windows® compatible PC. Pro-grams can be stored either in the controlunit’s integrated non-volatile RAM, in aplug-in EPROM module or a CF card.
High resolution screens
High resolution screens, with up to 65,536colours on selected GOT1000 units, can dis-play complex graphics, photos, CAD draw-ings and even PDFs and office documentssuch as MS Excel and WORD. This docu-ment flexibility allows the GOT to trulybecome the shop floor informationresource as well as a data monitoring tool.
High-speed processing
A 64-bit RISC processor is combined with aspecially developed high-speed graphicsprocessor to make the GOT1000 units fastand responsive to user inputs, changes indata and display drawing times.
VersatileIn addition to the wide ranging support forMitsubishi PLC’s, frequency inverters andservo amplifiers, GOT1000 series can alsobe connected to an increasing range ofautomation products from other manufac-turers. This enables users to build a com-mon visualization strategy for theiroperation independently of the controlsolution used.
MultilingualFurthermore, support for Unicode 2.1enables users to easily create multi-lan-guage displays in languages as diverse asRussian and Japanese. This is especiallyuseful for companies who exportmachines. It enables them to be easilylocalized while still maintaining a core sys-tem for the manufacturers engineers tomaintain service and support.
Information sharingAn integrated server function allows themonitoring and data collection of informa-tion by a remote personal computer. Errorinformation can also be checked and trans-mitted to the PC. This feature makes dataand system maintenance functions veryeasy as there is no longer any need to visitevery factory to collect data or status infor-mation from every GOT.
Seeing is believingThe touch-sensitive control screen, whichgreatly facilitates data entry and parameterediting, is one of the most popular featuresof the GOT operator terminals. Many usersfind the easy touch screen operation andflexible use enhance their HMI projects.
Mitsubishi’s GOT series offers a wide rangeof models from small 3-colour touchscreens to large TFT’s and handheld units.In addition there are multiple systemaccessories that can add diverse capabili-ties such as networking, camera inputs anddirect MES integration depending uponthe GOT unit selected.
GOT1000at a glance
Display:From Monochrome LCD to STNor TFT 65.536 colours
Resolution:From 128 x 64 up to 1024 x 768
Function keys:Except of 2 units, all panels have touchscreen and definable touch keys
PowerfultechnologyThe GOT1000 series has been designedwith the needs of the user in mind. Forexample:
Diagnostics functions
The GOT1000 series’ innovative errorreporting system ensures fast trouble-shooting and minimum downtime. Prede-fined screens provide direct access to thePLCs I/Os and even the buffer memory ofspecial-function modules.
Features such as alarm handling, historicaltrending and memory areas for storinghelp texts or bitmaps also contribute torapid troubleshooting and fault correction.
Transparent Mode
GOT1000 units can also allow users todownload programs to the connectedMitsubishi PLC through the existing con-nection established with the GOT displayunit.
Flexible program storage
The GOT units can be programmed withthe GT Works2 software package, whichruns on any Windows® compatible PC. Pro-grams can be stored either in the controlunit’s integrated non-volatile RAM, in aplug-in EPROM module or a CF card.
High resolution screens
High resolution screens, with up to 65,536colours on selected GOT1000 units, can dis-play complex graphics, photos, CAD draw-ings and even PDFs and office documentssuch as MS Excel and WORD. This docu-ment flexibility allows the GOT to trulybecome the shop floor informationresource as well as a data monitoring tool.
High-speed processing
A 64-bit RISC processor is combined with aspecially developed high-speed graphicsprocessor to make the GOT1000 units fastand responsive to user inputs, changes indata and display drawing times.
VersatileIn addition to the wide ranging support forMitsubishi PLC’s, frequency inverters andservo amplifiers, GOT1000 series can alsobe connected to an increasing range ofautomation products from other manufac-turers. This enables users to build a com-mon visualization strategy for theiroperation independently of the controlsolution used.
MultilingualFurthermore, support for Unicode 2.1enables users to easily create multi-lan-guage displays in languages as diverse asRussian and Japanese. This is especiallyuseful for companies who exportmachines. It enables them to be easilylocalized while still maintaining a core sys-tem for the manufacturers engineers tomaintain service and support.
Information sharingAn integrated server function allows themonitoring and data collection of informa-tion by a remote personal computer. Errorinformation can also be checked and trans-mitted to the PC. This feature makes dataand system maintenance functions veryeasy as there is no longer any need to visitevery factory to collect data or status infor-mation from every GOT.
Seeing is believingThe touch-sensitive control screen, whichgreatly facilitates data entry and parameterediting, is one of the most popular featuresof the GOT operator terminals. Many usersfind the easy touch screen operation andflexible use enhance their HMI projects.
Mitsubishi’s GOT series offers a wide rangeof models from small 3-colour touchscreens to large TFT’s and handheld units.In addition there are multiple systemaccessories that can add diverse capabili-ties such as networking, camera inputs anddirect MES integration depending uponthe GOT unit selected.
GOT1000at a glance
Display:From Monochrome LCD to STNor TFT 65.536 colours
Resolution:From 128 x 64 up to 1024 x 768
Function keys:Except of 2 units, all panels have touchscreen and definable touch keys
GOT1000 units can be used globally with their sup-port for Unicode characters
9
Human Machine Interface /// E1000 /// Human Machine Interface /// E1000 /// Human Machine Interface /// E1000 /// Human Machine Interface /// E1000 /// Human Machine Interfa
8
A modern-daycontrol centerMitsubishi’s E1000 series of HMIs offeroperator display solutions from small easytext displays to large multi-colour, high res-olution, graphic displays with touch screen.These practical operator terminals canoften replace an entire control console.They enable an operator to manage and ifneed be intervene in the application byvery easily changing the process dataparameters. The units in the E1000 seriesperfectly match the MELSEC range of con-trollers and are very simple to operate.
The E1000 series operator terminals pro-vide a huge leap forward in display tech-nology, as ergonomics and ease of usewere central to the new series design. TheE1000 proves again how open HMI tech-nology can be the key to integrated auto-mation.
E1000 – Open HMI TechnologyFeatures thatusers valueThe E1000 and its predecessor, MAC Eseries HMI’s, have a long history of pioneer-ing HMI design. Over many years develop-ment and the accumulated experience ofthousands of users has sharpened theseHMIs to become the leading edge productsmany users are now familiar with. Featuresthat have remained the keystone of thissuccess include:
Multi-language support
All the MAC E and E1000 units supportmulti-language applications created withinthe programming software. These applica-tions allow the operators to select the userinterface language they wish to use asUnicode is supported.
Dual driver support
All E series operator terminals (except theMAC E50) can access two different systemssimultaneously acting as a protocol con-verter or as an information gateway. Thishas enabled many users to create systemsthat span many third party automationproducts that would not normally be possible.
E1000 is designed to give a window into the manufacturing process.
This functionality is supported both on thestandard RS232C and RS422 ports and viathe extended Profibus/DP and Ethernetinterfaces. For example, you can write datawords from a PLC directly into the parame-ter settings of a frequency inverter.
In addition, by using E1000 utilities andtools, remote “viewing” of the locally dis-played screen is also possible across anintranet or internet connection makingsure you know exactly what is going on at amachine level.
High performancedesignBy combining the latest Intel XScale RISCprocessor with 32 MB of Strataflash and64 MB RAM, the E1000 not only offers highperformance while running WindowsCE.NET but also security and “peace ofmind“.
With this powerful combination of technol-ogy valuable production data and machineoperational information is protected evenif a power failure occurs during a file writeprocess.
Data managementData storage and sharing are importantfunctions of the manufacturing processand operator terminals are quickly becom-ing the gateway to that data. The E1000series makes access to data easier andmore flexible than ever before. Users canchoose between the use of:
Combined Ethernet – internet connec-tivity for factory wide or global accessto data.
Direct connection to a modem forsimple remote telemetry solution(GSM/GPRS/PSTN) where a system maybe installed at an inaccessible location.
A new external CF data card interfaceon the front of the E1000 also meansdata can be “taken” away on a remova-ble data card for safe/permanent sto-rage and processing.
Local printing directly from the HMIdisplay is also possible where a localhard copy of processed data isrequired.
Highly compatible
High performance in the most demanding applications
E1000at a glance
Display:From Monochrome LCD to STNor TFT 65.536 colours
Resolution:From 16 x 2 up to 80 x 60 char(1024 x 768)
Function keys:From 4 to 50(physical or touch screen)
Networks capability:Profibus/DP, Ethernet*
Interface:RS232C, RS422, RS485, USB
*not available for all units
9
Human Machine Interface /// E1000 /// Human Machine Interface /// E1000 /// Human Machine Interface /// E1000 /// Human Machine Interface /// E1000 /// Human Machine Interfa
8
A modern-daycontrol centerMitsubishi’s E1000 series of HMIs offeroperator display solutions from small easytext displays to large multi-colour, high res-olution, graphic displays with touch screen.These practical operator terminals canoften replace an entire control console.They enable an operator to manage and ifneed be intervene in the application byvery easily changing the process dataparameters. The units in the E1000 seriesperfectly match the MELSEC range of con-trollers and are very simple to operate.
The E1000 series operator terminals pro-vide a huge leap forward in display tech-nology, as ergonomics and ease of usewere central to the new series design. TheE1000 proves again how open HMI tech-nology can be the key to integrated auto-mation.
E1000 – Open HMI TechnologyFeatures thatusers valueThe E1000 and its predecessor, MAC Eseries HMI’s, have a long history of pioneer-ing HMI design. Over many years develop-ment and the accumulated experience ofthousands of users has sharpened theseHMIs to become the leading edge productsmany users are now familiar with. Featuresthat have remained the keystone of thissuccess include:
Multi-language support
All the MAC E and E1000 units supportmulti-language applications created withinthe programming software. These applica-tions allow the operators to select the userinterface language they wish to use asUnicode is supported.
Dual driver support
All E series operator terminals (except theMAC E50) can access two different systemssimultaneously acting as a protocol con-verter or as an information gateway. Thishas enabled many users to create systemsthat span many third party automationproducts that would not normally be possible.
E1000 is designed to give a window into the manufacturing process.
This functionality is supported both on thestandard RS232C and RS422 ports and viathe extended Profibus/DP and Ethernetinterfaces. For example, you can write datawords from a PLC directly into the parame-ter settings of a frequency inverter.
In addition, by using E1000 utilities andtools, remote “viewing” of the locally dis-played screen is also possible across anintranet or internet connection makingsure you know exactly what is going on at amachine level.
High performancedesignBy combining the latest Intel XScale RISCprocessor with 32 MB of Strataflash and64 MB RAM, the E1000 not only offers highperformance while running WindowsCE.NET but also security and “peace ofmind“.
With this powerful combination of technol-ogy valuable production data and machineoperational information is protected evenif a power failure occurs during a file writeprocess.
Data managementData storage and sharing are importantfunctions of the manufacturing processand operator terminals are quickly becom-ing the gateway to that data. The E1000series makes access to data easier andmore flexible than ever before. Users canchoose between the use of:
Combined Ethernet – internet connec-tivity for factory wide or global accessto data.
Direct connection to a modem forsimple remote telemetry solution(GSM/GPRS/PSTN) where a system maybe installed at an inaccessible location.
A new external CF data card interfaceon the front of the E1000 also meansdata can be “taken” away on a remova-ble data card for safe/permanent sto-rage and processing.
Local printing directly from the HMIdisplay is also possible where a localhard copy of processed data isrequired.
Highly compatible
High performance in the most demanding applications
E1000at a glance
Display:From Monochrome LCD to STNor TFT 65.536 colours
Resolution:From 16 x 2 up to 80 x 60 char(1024 x 768)
Function keys:From 4 to 50(physical or touch screen)
Not all applications require full PC expan-sion and processing. This is exactly wherethe IPCs of the MicroClient series are in aclass of their own. These ultra compactPanel PCs provide basic PC operation andoffer a choice of 12.1” and 15” displays. TheMicroClient solution provides entry levelPC power and rugged design all for a bud-get price.
For reducing the unit size and removingone of the major moving parts that couldfail, the MicroClient panels are alsodesigned to operate without a cooling fan.
Full processing power
Mitsubishi’s V-Panel Express series providesall of the traditional PC flexibility usersexpect. Expandable configurations includ-ing up to 2 PCI cards and a choice of 15” or17” displays mean users can tailor their IPCto their own requirements. The V-PanelExpress series does not need a cooling fan.
GT Works2 –A Complete Software SuiteIPC or HMI?GT Works2 is a single software environ-ment that can be used to develop screendesigns/content for either a PC/IPC or a tra-ditional hardware unit such as theGOT1000 series.
This flexibility from a single design toolmeans reduced cost of ownership as usersonly have to learn one software tool. Inaddition there is a greater re-use of existingprojects.
All in oneGT Works2 is a multi tool software solutionwhich include:
GT Designer2
This is the core design and developmentsoftware.
GT Simulator2
A simulation package that allows users tosimulate their projects operation as if itwere really installed on a GOT1000.
GT SoftGOT1000
A PC based HMI environment that allowsusers to deploy their created HMI screendirectly to a PC or IPC.
High function,easy to useGT Works2 offers a comprehensive libraryof graphical elements that enable users ofany skill level to quickly create the screendesigns they need.
Integrated wizards, user-friendly menusand helpful dialog boxes enable users toset-up projects, complete security settingsand change language settings with a mini-mum of fuss.
Advanced simulationDebugging and commissioning can be anexpensive and time consuming activity.However, with GT Works2 the integratedsimulation software allows users to checkthe function and operation of their screendesigns without any additional hardware.This can significantly help reduce costs anddevelopment time.
In addition if GX Developer and GX Simula-tor are also used then the combined PLCand HMI solution can be tested anddebugged even before any electrical pan-els have been purchased or even wired.
The Mitsubishi’s Industrial PC (IPC) range isruggedly designed for heavy duty indus-trial applications and environments. ThesePCs feature high quality, fast performance,attractive design and brilliantly legible dis-plays. They are ideal as process visualisa-tion platforms, particularly in combinationwith the GT SoftGOT1000 and SCADA soft-ware packages.
When your requirements exceed the limitsof a traditional HMI control unit, you need aPC-based system.
Compact yetpowerfulThe new IPC1000 Series terminals are avail-able in two basic formats, the MicroClientseries and the fully featured V-PanelExpress series.
Rugged design
A wide operating and storage temperaturerange, tough vibration resistance and highIP ratings mean Mitsubishi’s IPCs can beused in many locations.
Industrial PCs are especially contructed for heavy-duty industrial applications
GT Designer2 has a comprehensive graphic library.
10 11
GT Works2, comprehensive yet flexible
Rugged and industrial in design and performance
IPC1000at a glance
Display:TFT from 12.1” to 17” touch screen
Resolution:From 800 x 600 up to 1280 x 1024
Processor:Intel Celeron M 800 MHz or Core2 Duo
Basic memory:512 MB (RAM)
Built in harddisk:40 GB
Interfaces*:1 x RS232C, 1 to 5 x USB 2.0,1 x 10/100 MBaud Ethernet,1 x 1000 MBaud Ethernet (only V-PanelExpress)
Not all applications require full PC expan-sion and processing. This is exactly wherethe IPCs of the MicroClient series are in aclass of their own. These ultra compactPanel PCs provide basic PC operation andoffer a choice of 12.1” and 15” displays. TheMicroClient solution provides entry levelPC power and rugged design all for a bud-get price.
For reducing the unit size and removingone of the major moving parts that couldfail, the MicroClient panels are alsodesigned to operate without a cooling fan.
Full processing power
Mitsubishi’s V-Panel Express series providesall of the traditional PC flexibility usersexpect. Expandable configurations includ-ing up to 2 PCI cards and a choice of 15” or17” displays mean users can tailor their IPCto their own requirements. The V-PanelExpress series does not need a cooling fan.
GT Works2 –A Complete Software SuiteIPC or HMI?GT Works2 is a single software environ-ment that can be used to develop screendesigns/content for either a PC/IPC or a tra-ditional hardware unit such as theGOT1000 series.
This flexibility from a single design toolmeans reduced cost of ownership as usersonly have to learn one software tool. Inaddition there is a greater re-use of existingprojects.
All in oneGT Works2 is a multi tool software solutionwhich include:
GT Designer2
This is the core design and developmentsoftware.
GT Simulator2
A simulation package that allows users tosimulate their projects operation as if itwere really installed on a GOT1000.
GT SoftGOT1000
A PC based HMI environment that allowsusers to deploy their created HMI screendirectly to a PC or IPC.
High function,easy to useGT Works2 offers a comprehensive libraryof graphical elements that enable users ofany skill level to quickly create the screendesigns they need.
Integrated wizards, user-friendly menusand helpful dialog boxes enable users toset-up projects, complete security settingsand change language settings with a mini-mum of fuss.
Advanced simulationDebugging and commissioning can be anexpensive and time consuming activity.However, with GT Works2 the integratedsimulation software allows users to checkthe function and operation of their screendesigns without any additional hardware.This can significantly help reduce costs anddevelopment time.
In addition if GX Developer and GX Simula-tor are also used then the combined PLCand HMI solution can be tested anddebugged even before any electrical pan-els have been purchased or even wired.
The Mitsubishi’s Industrial PC (IPC) range isruggedly designed for heavy duty indus-trial applications and environments. ThesePCs feature high quality, fast performance,attractive design and brilliantly legible dis-plays. They are ideal as process visualisa-tion platforms, particularly in combinationwith the GT SoftGOT1000 and SCADA soft-ware packages.
When your requirements exceed the limitsof a traditional HMI control unit, you need aPC-based system.
Compact yetpowerfulThe new IPC1000 Series terminals are avail-able in two basic formats, the MicroClientseries and the fully featured V-PanelExpress series.
Rugged design
A wide operating and storage temperaturerange, tough vibration resistance and highIP ratings mean Mitsubishi’s IPCs can beused in many locations.
Industrial PCs are especially contructed for heavy-duty industrial applications
GT Designer2 has a comprehensive graphic library.
10 11
GT Works2, comprehensive yet flexible
Rugged and industrial in design and performance
IPC1000at a glance
Display:TFT from 12.1” to 17” touch screen
Resolution:From 800 x 600 up to 1280 x 1024
Processor:Intel Celeron M 800 MHz or Core2 Duo
Basic memory:512 MB (RAM)
Built in harddisk:40 GB
Interfaces*:1 x RS232C, 1 to 5 x USB 2.0,1 x 10/100 MBaud Ethernet,1 x 1000 MBaud Ethernet (only V-PanelExpress)
*not available for all units
Flexible project targeting
GT Works2
One project2 targets
GOT1000
IPC withSoftGOT
E-Designer –Clear, Simple, Easy
This is complimented by a library ofready-to-use symbols and objects whichspeed up screen design and creation.
Multilingual projectsUsers who export control systems withlocal language displays will find E-Design-ers multilingual project support a big bene-fit. Up to ten screen languages can beloaded in to a small database allowingoperators to switch between any loadedlanguages. All text blocks from the data-base can be easily exported and importedwith the Application Languages Manager.
Multi driver supportCommunication drivers for all MELSEC PLCsand many third-party PLCs are available asstandard. These can be updated online viathe Internet without exiting E-Designer.
MX4 –SCADA and HMI in HarmonyIncrease your Return On Assets (ROA) withMX4 SCADA, delivering scalable, flexibleand reliable control and monitoring sys-tems that reduce your operating costs andimprove productivity. A fully integratedpackage, MX4 SCADA’s easy-to use config-uration tools and powerful features enableyou to quickly develop and deploy solu-tions which can handle the most complexrequirements for any size enterprise.
Tailored solutions
MX4 SCADA ‘s exceptional flexibility maxi-mizes your productivity by allowing user tocreate optimal system architectures in theway that best suits them -giving access toboth centralised and distributed process-ing.
Scalable solutions
Based on Microsoft technologies, MX4SCADA has been designed with an innova-tive, scalable architecture. This preservesyour initial investment by allowing yoursystem to grow with your requirements,without modifying system hardware orsoftware.
Reliable and redundant solutions
MX4 SCADA minimizes downtime by offer-ing unrivalled reliability. It utilizes DCSstyle, built-in, redundancy that can toleratesystem failures anywhere with no loss offunctionality or performance.
The E-Designer software helps users toquickly start creating screen designs foruse on MAC E and E1000 terminal units.Its intuative design excellently supportsnew users but also enhances the productiv-ity of experienced users.
Ease of useE-Designer has many features designed toimprove the working process, for examplethe software’s Block Manager gives a com-plete graphical overview of a project, mak-ing project management and debugguingeasier and quicker.
Clear and powerul communication for all levels ofapplication Business benefits
Integrating MX4 with business systems letsusers maximise productivity, improveproduct quality and reduce both mainte-nance and operating costs.
Free development package
MX4 is available as a free developmentpackage, which helps to reduce the cost ofusage. Key features include graphical pro-cess visualisation, historical/real timetrending and advanced alarming andreporting.
The installation procedure is customisableand totally scalable - simply upgraded witha new software key. It is also fully compati-ble with MX4 HMI. FastLinx is included withMX4 for fast and simple interfacing toMELSEC PLCs.
Simple to configure
A full set of user expandable libraries withgraphics symbols and templates areincluded.There are also other time saving featuressuch as express Wizards for PLC communi-cations, Genies for configuration of com-plex animation objects and Super Geniesfor repetitive plant processes.
Dual driver technology
Simultaneous connection using dual driver technology
E-Designer –Clear, Simple, Easy
This is complimented by a library ofready-to-use symbols and objects whichspeed up screen design and creation.
Multilingual projectsUsers who export control systems withlocal language displays will find E-Design-ers multilingual project support a big bene-fit. Up to ten screen languages can beloaded in to a small database allowingoperators to switch between any loadedlanguages. All text blocks from the data-base can be easily exported and importedwith the Application Languages Manager.
Multi driver supportCommunication drivers for all MELSEC PLCsand many third-party PLCs are available asstandard. These can be updated online viathe Internet without exiting E-Designer.
MX4 –SCADA and HMI in HarmonyIncrease your Return On Assets (ROA) withMX4 SCADA, delivering scalable, flexibleand reliable control and monitoring sys-tems that reduce your operating costs andimprove productivity. A fully integratedpackage, MX4 SCADA’s easy-to use config-uration tools and powerful features enableyou to quickly develop and deploy solu-tions which can handle the most complexrequirements for any size enterprise.
Tailored solutions
MX4 SCADA ‘s exceptional flexibility maxi-mizes your productivity by allowing user tocreate optimal system architectures in theway that best suits them -giving access toboth centralised and distributed process-ing.
Scalable solutions
Based on Microsoft technologies, MX4SCADA has been designed with an innova-tive, scalable architecture. This preservesyour initial investment by allowing yoursystem to grow with your requirements,without modifying system hardware orsoftware.
Reliable and redundant solutions
MX4 SCADA minimizes downtime by offer-ing unrivalled reliability. It utilizes DCSstyle, built-in, redundancy that can toleratesystem failures anywhere with no loss offunctionality or performance.
The E-Designer software helps users toquickly start creating screen designs foruse on MAC E and E1000 terminal units.Its intuative design excellently supportsnew users but also enhances the productiv-ity of experienced users.
Ease of useE-Designer has many features designed toimprove the working process, for examplethe software’s Block Manager gives a com-plete graphical overview of a project, mak-ing project management and debugguingeasier and quicker.
Clear and powerul communication for all levels ofapplication Business benefits
Integrating MX4 with business systems letsusers maximise productivity, improveproduct quality and reduce both mainte-nance and operating costs.
Free development package
MX4 is available as a free developmentpackage, which helps to reduce the cost ofusage. Key features include graphical pro-cess visualisation, historical/real timetrending and advanced alarming andreporting.
The installation procedure is customisableand totally scalable - simply upgraded witha new software key. It is also fully compati-ble with MX4 HMI. FastLinx is included withMX4 for fast and simple interfacing toMELSEC PLCs.
Simple to configure
A full set of user expandable libraries withgraphics symbols and templates areincluded.There are also other time saving featuressuch as express Wizards for PLC communi-cations, Genies for configuration of com-plex animation objects and Super Geniesfor repetitive plant processes.
Dual driver technology
Simultaneous connection using dual driver technology
The use of HMI technology has beenincreasing as manufacturers increasinglydemand information in realtime. Theboundries between “shop floor” data andbusiness operation/process data is fastbecoming blurred and places higherdemands on visualisation and data pro-cessing tools to span the wide range of“new” applications.
New challengesUsing visualisation tools to support main-tenance has never been high on theagenda of machine and process engineers,but if system downtime is considered asone of the most costly problems manufac-turers face, then why not? HMI screen’s canbe configured to easily report on all of thecritical control aspects of a system aidingefficient problem diagnosis.
Visualisationand productivity
In fact some HMIs have the ability to reporterrors remotely, even contacting the main-tenance team before the line operators areaware there is a problem. The potential ofvisualisation tools to improve process“uptime” is enormous.
The Business CycleFast data retrieval, greater transparencyrequire simplier and more effiecient con-trol architectures. Because of this thedemand for high reliability SCADA and PCbased solutions is critical especially whenfeeding data in to a businesses central MESand ERP systems. But even now it is possi-ble to see a future trend for embedingdirect MES functionality in to PLC stationsand high function HMIs. This can providehuge gains for the manufacturer, i.e.;reducing system complexity by removing alayer of intermedary PCs; increased datasecurity by providing quicker respose andindustrialised hardware; localised controlpoints giving increased access to vital infor-mation.
e-F@ctoryAs a manufacturer and supplier of automa-tion products Mitsubishi Electric has longrecognised these key issues and has devel-oped solutions for its own complex pro-duction needs. This has resulted in manyinnovations such as GOT displays that have“built in” maintetance screens as well as theability to review and monitor PLC pro-grams. Other advances include MES inter-faces for direct connection of PLC and HMItechnology to MES SQL databases.
Mitsubishi’s Vision1000 visualisation solu-tions are a clear part of today’s e-F@ctoryhelping manufacturers increase productiv-ity in a scalable and reliable way.
HMI technology can easily consolidate information at one point.
14 15
A world ofautomation solutions
Mitsubishi offer a wide range of automation equipment from PLCs and HMIs to CNC and EDM machines
A name to trustSince its beginnings in 1870, some 45 com-panies use the Mitsubishi name, covering aspectrum of finance, commerce and industry.
The Mitsubishi brand name is recognizedaround the world as a symbol of premiumquality.
Mitsubishi Electric Corporation representsspace development, transportation, semi-conductors, energy systems, communica-tions and information processing, audiovisual equipment, home electronics, build-ing and energy management and automa-tion systems, and has 237 factories andlaboratories worldwide in over 121 countries.
This is why you can rely on a Mitsubishiautomation solution – because we knowfirst hand about the need for reliable, effi-cient, easy-to-use automation and control.
As one of the world’s leading companieswith a global turnover of 3.4 trillion Yen(approximately $30.8 billion), employingover 100,000 people, Mitsubishi Electrichas the resource and the commitment todeliver the ultimate in service and supportas well as the best products.
Robots
Motion control and servos
Inverters
HMI and GOTs
Micro PLCs
EDM machines
CNCcontrollers
Laser machines
LV circuit protection
Modular PLCs
Enterprise PC(MES/ERP/SCADA)
Pressurestorage tank
Remote I/Os
Transportconveyor (OUT)
Rotationalconveyor
Transportconveyor (IN)
Local HMI, plantwide information
Servo amplifiers
Filling tubes
PLCFrequency Inverter
Technical Information Section
/// GOT1000 /// E1000 /// IPC1000 ///
1HMI-Catalogue 2008 UK.prn????Freitag, 13. Juni 2008 12:46:59
Product catalogues for programmable logic controllers andaccessories for the MELSEC System Q series
Technical catalogue Alpha and FX family
Product catalogues for programmable logic controllers andaccessories for the Alpha and FX families
Technical catalogue Frequency inverters
Product catalogue for frequency inverters and accessories
Technical catalogues MELSERVO and Motion Controllers
Product catalogues for servo motors and amplifiers of theMR-J2S Series and Motion Controllers with SSCNET
Technical catalogue Robots
Product catalogue forMELFA industrial robots and accessories
TechnicalCatalogues
Further Publications within the Factory Automation Range
More information?
This technical catalogue is designed to give an overview of the extensive range of operator terminals of the GOT, E series and Industrial PCsand Visualization software. If you cannot find the information you require in this catalogue, there are a number of ways you can get furtherdetails on configuration and technical issues, pricing and availability.
For technical issues visit the www.mitsubishi-automation.com website.
Our website provides a simple and fast way of accessing further technical data and up to the minute details on our products andservices. Manuals and catalogues are available in several different languages and can be downloaded for free.
For technical, configuration, pricing and availability issues contact our distributors and partners.
Mitsubishi partners and distributors are only too happy to help answer your technical questions or help with configuration building.For a list of Mitsubishi partners please see the back of this catalogue or alternatively take a look at the “contact us” section of our website.
This catalogue is a guide to the range of products available. For detailed configuration rules, system building, installation and configurationthe associated product manuals must be read. You must satisfy yourself that any system you design with the products in this catalogue is fitfor purpose, meets your requires and conforms to the product configuration rules as defined in the product manuals.
Specifications are subject to change without notice. All trademarks acknowledged.
Users of today’s factory automation systemswant more and clearer information on thecontrol systems of their plant and machin-ery. HMI control terminals and process visu-alisation software enable an informativedialogue between operator and machine,making them the ideal complement to theMELSEC PLC systems and other factoryautomation components.
HMI control units make factory systemfunctions transparent, enabling theoperator to monitor and edit process dataquickly and easily.
You can choose between HMI control unitswith text and graphical displays. Fully pro-grammable function keys and displaysmake the units even more user-friendly. Theunits can be programmed andconfigured with a PC running the intuitiveWindows-based programming softwarepackage.
HMI units can be installed directly on yourmachines and require nearly no additionalmodules for connection to the PLC andother factory automation components.They provide direct access to all informa-tion and process data, with text or graphicaldisplays.
An IP65 rating (and higher) ensures that theHMIs will always perform reliably, evenunder the toughest conditions.
Network support, communication betweendevices and data exchange are all standardfeatures in today’s factory automation sys-tems. The HMI control units and processvisualisation software provide full supportfor the commonest standard networks.
The control units are normally connected tothe RS422 or RS232 port.
If you require a standard open network youcan choose between PROFIBUS/DP, CC-Linkand Ethernet TCP/IP.
Data communications over longer dis-tances via modem are also possible – thismeans you can monitor and edit your con-figuration, programs and data from thecomfort of your desk.
pair)* CC-Link* USB**Standard or optional dependent on the operatorterminal type
Modem LinksEnables connections over largerdistances.
Ethernet
MELSECNET/10/H and CC-Link IEEnables high-speed access (up to1 Gbaud) to the PLC from multiplelocations via the GT15.
Multi Driver supportThe control units can be used e.g. asa gateway between 2 systems (E1000)and a gateway between 4 systems(GT15).
PROFIBUS/DPE series control units can be connectedas slaves in systems using the open fieldbus protocol.
Multidrop-NetEnables programming and data loggingfrom a central location using a PC; theindividual stations operate autonomous-ly and independently of one another.
No-Protocoll-LinkEnables connection of barcode readersand other serial devices to the PLC viathe E series control units.
A-BUS/Q-BUSDirect connection of the GT15to the PLC’s expansion port for fastcommunications.
P R O F I
U SBPROCESS FIELD BUS
MELSECNETMELSECNET
7 8 9
ABCD EFGH IJKL
MNOP QRST UVWX
YZ!? C1-C4 < >()
+/*= °%# _'@,
4 5 6
1 2 3
- 5.
PREV HOME NEXT
ALARM ACK
7 8 9
ABCD EFGH IJKL
MNOP QRST UVWX
YZ!? C1-C4 < >()
+/*= °%# _'@,
4 5 6
1 2 3
- 5.
PREV HOME NEXT
ALARM ACK
MITSUBISHI
POWER
ETHERNET
5HMI-Catalogue 2008 UK.prn????Freitag, 13. Juni 2008 12:48:55
The graphic operator terminals of theGOT1000 series represent the top productsby MITSUBISHI ELECTRIC.They provide ahigh-resolution fully graphical display and atouch-sensitive user surface. The depth ofonly 50 mm makes it to one of the slimmestoperator panel on the market. Statechanges and user inputscan be entered easily.
The 64-bit RISC processor used in theGOT1000 series is combined with a speciallydeveloped high-speed graphics processor.Together, they deliver impressive responseand display drawing times.
With the GOT1000 the user accesses allMELSEC PLCs special function modules inorder to test individual parts of the plant.The PLC programs can be monitored graph-ically (ladder diagram).
The control units are programmed withthe GT Works software package running ona PC under MS Windows®.Programs can be stored either in the controlunit’s integrated, battery-powered RAM, inplug-in EPROM modules or on Compactflash memory cards.
A vast number of indicating instrumentslike indicators, pressure gauges, analog anddigital measuring devices, etc. can bereplaced by corresponding graphicalobjects.
Lots of ready-to-use practical objects areincluded in the MS Windows® compatibleprogramming software and reduce pro-gram development time.
All units feature an integrated real-timeclock, password access control and alarmand recipe handling.
The GOT1000 features Unicode 2.1 support.This enables users to easily create multi-lan-guage displays.
GOT1000
Operator Terminals GT15
POWER
Complex processes displayed simply
Every GT15 operator panel offers a TFTcolour touch screen with outstandinggraphic properties. Screen sizes from 5.7" to15" are available.
In terms of networks, the GT15 are espe-cially powerful with options for MELSEC-NET/10/H, CC-Link (IE) and Ethernet as wellas the four-driver-concept (4 drivers at thesame time and the possibility of dataexchange via gateway between the driversas well as third party manufacturers).
All GT15 units provide all mayor interfaces,especially named is the fast USB port on thefront side of the panel. It can be used for allkinds of direct data exchange or project upand downloads.
The graphic display configuration on thetouch screen is variable, giving the operat-ing staff all possibilities of modern applica-tions.
Multi-talent for Stand-aloneApplications
The graphical control units of the GT11series combines particularly easy operationwith maximum functionality and modestspace requirements. Portable handy typesare available too.
The 5.7" STN touchscreen offers brilliantscreens with up to 256 colours.
The graphic display configuration on thetouch screen is variable, giving the operatorquick and easily-comprehensible access toinformation on machine functions.
With Compact Flash cards it is easy to trans-fer and save project data and operation sys-tem updates. The fast USB port on the frontof the units makes it possible to transferproject data without opening the cabinet orcontrol console.
Mitsubishi PLC's, servo amplifiers, fre-quency inverters and several automationcomponents can be programmed andparametrized directly via the GOT.
All GT11 units have a built-in recipe func-tionality.
Operator Terminals GT11
Operator Terminals GT10Intelligent Micro-GOTs
The new GT1020/1030 series terminals havea bright 3.7" resp. 4.5" STN b/w liquid crystaldisplay with touch screen and 3-colorbacklight (LBDW and LBLW models featureswhite backlight) for use in a variety of dis-play applications.
Several languages and free font selectioncan be used. A PLC value could be used toswitch the backlight status from green (con-dition OK) to red (warning).
These micro units are micro only in size.They are full of high function capabilities
which deliver outstanding benefits. They areavailable with different interfaces, i.e. LBL andLBD models provide an RS422 interface andLBL2, LBD2 models provide an RS232 inter-face.
Many MITSUBISHI ELECTRIC automation com-ponents or third party devices can be con-nected and monitored, also PCs.
Both horizontal and vertical mounting is avail-able to meet the needs of different applica-tions.
The control units are programmed with the GTWorks software package running on a PCunder MS Windows®.
Noise durability 1000 Vpp tested by noise generator; 1 µs at 30 – 100 Hz 1000 Vpp tested by noise generator; 1 µs at 30 – 100 Hz
Dielectric withstand voltage 1500 V AC, > 1 min / 500 V DC, > 1 min 1500 V AV, > 1 min.
Shock resistance 15 G (3 times each in 3 directions) 10 G (3 times each in 3 directions)
Vibration resistance 1 G: resistant to vibrations from 9 – 150 Hz for 80 min. along all 3 axes 1 G: resistant to vibrations from10 – 55 Hz for 2 hours along all 3 axes
Altitude Max. 2000 m above NN Max. 2000 m above NN
Applicable installation position Cabinet or command panel Cabinet or command panel
Dimensions WxHxD (mm) 106 x 134 x 35.5 168 x 183 x 37.5 146 x 75 x 49 162 x 130 x 57 215 x 133 x 70.6
Weight (kg) 0.3 0.6 0.3 1.0 0.8
Order information Art. no. 146508 146721 128789 113862 / 113841 136797
Accessories Programming software (refer to page 46), cables and interface adapters (refer to page 20)
The F920GOT-BBD is a fullygraphical 2-colour operationterminal. The combination of anumerical keypad plus defin-able function keys offers a highdegree of functionality. The128kB of flash memory ensuresthat all data is secured andsaved in the case of powerfailure.
The F930GOT-BBD is a graphi-cal 2-colour operation terminal.The combination of a numericalkeypad plus definable functionkeys offers a high degree offunctionality.The 256 kB of flash memoryensures that all data is securedand saved in the case of powerfailure. The F930GOT-BBD isequipped with an integratedtouch display, for those whowish to combine the use ofboth a keyboard terminal with atouch-screen .
This entry-level F930GOT-BWD-E touch screen offers asimple monochrome graphicaldisplay in a compact housing.The combination of touchscreen and IP65 design makesthe unit easy to keep clean inenvironments that need a highlevel of hygiene or cleanliness.User screens can be createdusing a wide variety of graphi-cal elements and stored in theonboard, 256 kB memory. Otherspecial functions include alarmprocessing,recipe handling anddatasampling.
Building on the F930 specifica-tions, the F940GOT-WD-Efeatures a doubling of screensize and resolution making thedisplay crisp and easy to view.The F940GOT-SWD-E providesthe additional benefit of a col-our screen.The F940WGOT-TWD-E unitoffers a bright, clear 256 colourTFT display which can be usedin both a split screen configura-tion and in landscape or por-trait mounting positions. Theunit also boasts a further dou-bling of memory, over the stan-dard F940, to 1MB.
8HMI-Catalogue 2008 UK.prn????Freitag, 13. Juni 2008 12:50:33
Dimensions WxHxD (mm) 156 x 191 x 69.5 156 x 191 x 69.5 156 x 191 x 63.5 156 x 191 x 63.5
Weight (kg) 0.87 0.87 0.79 0.79
Art. no. 143390 / 143413
Accessories Programming software (refer to page 46), cables and interface adapters (refer to page 20)
F940GOT-SBD-RH-E,F943GOT-SBD-RH-E
F940GOT-LBD-RH-E,F943GOT-LBD-RH-E
F940GOT-SBD-H-E,F943GOT-SBD-H-E
F940GOT-LBD-H-E,F943GOT-LBD-H-E
The handy graphic operator ter-minals F940GOT-/F943GOTtype RH provide a high-resolu-tion fully graphical display witha touch-sensitive user surfaceand user-programmable func-tion keys. The terminal also fea-tures an Emergency Stopswitch, a key switch anda Dead-man switch, whichcan be integrated in the appli-cation.
These safety functions are thespecial advantages to the stan-dard type H handy operatorteminals F940GOT/F943GOT.
Acolourdisplaytype (F940GOT/F943GOT-SBD-RH-E) or amonochrome display type(F940GOT/F943GOT-LBD-RH-E)is available.
The Handy operator terminalsof the F940GOT type RH seriesprovide an RS422 and anRS232C interface each and theF943GOT type RH series pro-vide twoRS232C interfaces eachfor communication.
The handy graphic operator ter-minals F940GOT-/F943GOTtype H provide a high-resolu-tion fully graphical display witha touch-sensitive user surfaceand user-programmable func-tion keys. The terminal also fea-tures an Emergency Stopswitch.
Acolourdisplaytype (F940GOT/F943GOT-SBD-H-E) or a mono-chrome display type(F940GOT/F943GOT-LBD-H-)is available.
The Handy operator terminalsof the F940GOT type H seriesprovide an RS422 and anRS232C interface each and theF943GOT type H series providetwoRS232C interfaces each forcommunication.
9HMI-Catalogue 2008 UK.prn????Freitag, 13. Juni 2008 12:50:42
dimensions (mm) 86,4 x 34,5 (3,7") / 109,4 x 36 (4,5") 115 x 86 (5.7") 115 x 86 (5.7") 115 x 86 (5.7")text (lines x characters) User definable User definable User definable User definablecharacter height (mm) User definable, Windows fonts User definable, Windows fonts User definable, Windows fonts User definable, Windows fontsgraphical resolution (pixels) 160 x 64 / 288 x 96 320 x 240 320 x 240 320 x 240 / VTBD: 640 x 480
Power supply 24 V DC; GT1020-LBL(2): 5 V DC via PLC 24 V DC 24 V DCInternal memory capacity 512 kB / 1,5 MB 3 MB 3 MB 9 MBMemory card slot — 1 (CF card) 1 (CF card) 1 (CF card)Keyboard type Touch-panel Touch-panel Touch-panel Touch-panel
Function keysinternal Touch keys Touch keys Touch keys + 6 function keys Touch keys (300 per screen)external — — — —
type Serial Serial — Ethernet (TCP/IP), CC-Link, RS422,A-Bus, Q-Bus, MELSECNET/10max. no. of nodes 2 2 —
IP Rating (front panel) IP67 IP67F IP67F IP67FDimensions WxHxD (mm) 113 x 74 / 145 x 76 164 x 135 x 56 176 x 220 x 93 167 x 135 x 60Weight (kg) 0.2 / 0.3 0.7 1.0 1.1
Accessories Programming software (refer to page 46), cables and interface adapters (refer to page 20)
GT1020GT1030
GT1150-QLBD,GT1155-QSBD
GT1150HS-QLBD,GT1155HS-QSBD
GT1550-QLBD/GT1555-QSBD/ GT1555-QTBD
The new GT1020 and GT1030terminals have a bright 3.7-,resp. 4.5"-inch STN black-and-white liquid crystal display with3-color backlight (2 colour vari-ations) for use in a variety of dis-play applications.
Recipe management, alarmingand messaging are included asstandard. The unit has a built-inmemory for up to 4000 16-bitdata words which can be usedto store or exchange data with aconnected PLC.
The GT1020/1030 are availablein different types, see more onpage 6.
The GT11 panels GT1150-QLBDand GT1150HS-QLBD (16 gray-scales) as well as the GT1155-QSBD and GT1155HS-QSBD(256 colours) are the standardmodels of the GOT1000 seriesand offer a full array of basicfunctions for stand-alone use.
Beside their outstanding speedand performance they offer amodern design and a first onthe market front USB port forproject download and PLCmaintenance.
The GT1150HS-QLBD andGT1155HS-QSBD are hand-some portable terminals andboast top level quality formedium sized terminals. Theyshare the same functions as allGT11 series terminals.
Mitsubishi Electric Controllers,inverters and servo amplifierscan be easily programmed viathe USB transparent functional-ity.
All GT11 terminals feature reci-pes, alarms, multi-language andUnicode support.Furthermore they offer variousgraphical object libraries.
GT1550-QLBD, GT1555-QSBDand GT1555-QTBD have anexceptionally clear display of16 shades monochrome over4096 colour to 65536 full-colourdisplay.
Windows fonts for clear textpresentation as well as CF cardinterface for project operationsystems and data are available.
The panels can be mountedand used horizontal or vertical.
type TFT, 16 colours / 65536 colours TFT, 16 colours / 256 colours TFT, 65536 colours (expandable) TFT, 256 colours (expandable)dimensions (mm) 171 x 128 (8.4") 211 x 158 (10.4") 211 x 158 (10.4") 246 x 185 (12.1") / 304 x 228 (15")text (lines x characters) User definable User definable User definable User definablecharacter height (mm) User definable, Windows fonts User definable, Windows fonts User definable, Windows fonts User definable, Windows fontsgraphical resolution (pixels) 640 x 480 640 x 480 640 x 480 / 800 x 600 800 x 600 / 1024 x 768
Power supplyA types 100 – 240 V AC 100 – 240 V AC 100 – 240 V AC 100 – 240 V ACD types 24 V DC 24 V DC 24 V DC 24 V DC
Internal memory capacity VN types: 5 MB (expandable up to 53 MB)VT types: 9 MB (expandable up to 57 MB) 5 MB (expandable up to 53 MB) 9 MB (expandable up to 57 MB) 9 MB (expandable up to 57 MB)
IP Rating (front panel) IP67 IP67 IP67 IP67Dimensions WxHxD (mm) 241 x 150 x 56 303 x 214 x 56 303 x 214 x 56 316 x 242 x 56 / 397 x 296 x 61Weight (kg) 1.9 2.3 2.3 / 2.4 2.8 / 4.9
Order information Art. no. 166240 / 162705169480 / 169481
166241 / 166242169482 / 169483
162706 / 162707 / 169484 / 169485,video model 203496
162708 / 169464 / 169486 / 203469,video model 203495
Accessories Options cards (refer to page 19), programming software (refer to page 46), cables and interface adapters (refer to page 20)
GT1562-VNBA/VNBD,GT1565-VTBA/VTBD
GT1572-VNBA/VNBD,GT1575-VNBA/VNBD
GT1575-VTBA/VTBD,GT1575-STBA/STBD,GT1575V-STBD
GT1585-STBA/STBD,GT1595-XTBA/XTBD,GT1585V-STBD
The proprietary operating sys-tem as well as the completelynew developed hardware resultin an outstanding performanceand quality of the GT15 opera-tor terminals. The user canchoose between several fastproject up- and downloadoptions; high-speed serial con-nection with 115 kBaud, USB orproject transfer via CF-card isavailable.
In addition, the GT15 offerEthernet project transfer viathe Ethernet interfaceGT15-J71E71-100.
MELSEC PLCs can easily be pro-grammed using the front USBport with integrated Transpar-ent Mode, so updates on PLCs,servo amplifiers, inverters andGOT terminals can be accom-plished without opening thecabinet.
The file system of the CF card isPC compatible. Projects andoperating system componentscan be downloaded to the CFcard. The GT15 can load the filesfrom the CF card. This is acruical advantage for manufac-turers of serial machines.
In terms of networks, the GT15are especially powerful withoptions for MELSECNET/10/H,CC-Link (IE) and Ethernet as wellas the four-driver-concept(4 drivers at the same time andthe possibility of data exchangevia gateway between the driv-ers as well as third party manu-facturers).
The new Video modelsGT1585V- and GT1575V-STBDadditionally dispose of avideo/RGB input to monitorimages from PC's, cameras andvision sensors on the GOT.
All GT15 operator terminalslisted on this page are availableas AC type (-A models*)or as DC type (-D models).*Not for the video models
POWER POWERPOWER
POWER
11HMI-Catalogue 2008 UK.prn????Freitag, 13. Juni 2008 12:51:46
The E Series - State-of-the-Art Operation and Process Design!
The E series operator terminals provide aunique concept of flexible display blocks.The dialog screen is displayed quickly andcan be adopted to suit the users needs.
These operator terminals in many cases arecapable of replacing a complete controlconsole.
They permit simple alteration of processdata and thus influence the particularapplication.
The units in the E series are perfectlymatched to the range of MELSEC controllersand yet easy to operate.
The features include user-definable text,control parameter and data editing, alarmhandling, recipes and menu operation.
Programming is performed with anMS-Windows® compatible PC running theE-Designer software package.
“Dialog blocks” consisting of text and/orgraphics form the basis of all E applications.Via the object-orientated programming sys-tem, each dialog block displays all signalsand values allocated to the object in digitaland analog form.
The individual dialog blocks that makeup a E application form a hierarchical treestructure with the needed functionassigned to each dialog block. Thus, theyare adopted to the machine and processfunctions. The result is a clear operatorguidance with a clear information flow andclear text messages in case of an error.
Text and graphic blocks return static ordynamic information to the operator.
Text blocks display numeric values and text.The display supports scrolling, so the size oftext blocks is not limited by the number oflines on the screen.
The blocks can be output to a printer underPLC control.
The graphics block size is limited by the dis-play which has a resolution of240 x 64 pixel up to 1024 x 768 pixel.
Static objects for example, can be displayedin different font sizes or with predefinedgraphic objects.
Dynamic objects are predefined as well foreasier application development and can bescaled to any size.
In addition to these predefined objectsself-created bitmap graphics can beimported and managed in libraries.
QJ71BR11
QJ71BR11
RUN
STATION NO.X10
X1
MODE
MNG
T.PASS D.LINK
SD RD
ERR. L ERR.
0123456789
Q64ADRUN
ERROR
A/D0~±10V0~20mA
CH1
CH2
CH3
CH4
I+
V+
I+
V+
I+
V+
I+
V-
SLD
V-
SLD
V-
SLD
V-
SLD
A.G.
(FG)
V+
1
3
5
7
9
B
D
F
2
4
6
8
A
C
E
12VDC24VDC0.5A
L
L
L
L
L
L
L
L
L
L
L
L
L
L
L
L
COM
QY80
FUSE
0123456789
0 1 2 3 4 5 6 7
8 9 A B C D E F
0123456789
1
3
5
7
9
B
D
F
2
4
6
8
A
C
E
NC
24VDC4mA
COM
QX800 1 2 3 4 5 6 78 9 A B C D E F
Q06HCPU
RS-232
USB
PULL
MODERUNERR.
USERBAT.
BOOT
Q06HCPU
RS-232
USB
PULL
MODERUNERR.
USERBAT.
BOOT
MELSECQ61P-A2
PULL
MITSUBISHI
POWER
BAMODSERIAL
SE UNITEL Q38B
0205020E
7 8 9
ABCD EFGH IJKL
MNOP QRST UVWX
YZ!? C1-C4 < >()
+/*= °%# _'@,
4 5 6
1 2 3
- 5.
PREV HOME NEXT
ALARM ACK
7 8 9
ABCD EFGH IJKL
MNOP QRST UVWX
YZ!? C1-C4 < >()
+/*= °%# _'@,
4 5 6
1 2 3
- 5.
PREV HOME NEXT
ALARM ACK
7 8 9
ABCD EFGH IJKL
MNOP QRST UVWX
PREV HOME NEXT
ALARM ACK
YZ!? C1-C4 < >()
+/*= °%# _'@,
4 5 6
1 2 3
- 5.
Operator Terminals E1000
12HMI-Catalogue 2008 UK.prn????Freitag, 13. Juni 2008 12:52:01
All E series control units are fitted with anRS422 and an RS232 interface for connec-tion to the PLC.
This second port enables the unit to be runin transparent mode.
This means that the E series is capable ofcommunicating simultaneously with boththe connected PLC system and a PC (via theMX4 HMI or GX IEC Developer software).
The E units can also be linked to the PC viamodem.
Another communications option is theno-protocol mode for the connection ofserial peripheral devices (e.g. bar-codereaders).
Printer, mouse, keyboard or a USB memorystick can be connected to an E1000 controlunit via the integrated USB host port.
Networking
All E1000 operator terminals feature anintegrated Ethernet adapter to realize anEthernet network. For the conventionallyknown E series terminals is an communica-tions interface available (MAC-IFC-ETTP forE300 to E610) .
Within this network up to 30 stations can beconnected to one PLC in a segment.
The connection to open networks can beestablished through an optional interfacefor PROFIBUS/DP with a transfer rate of upto 12 Mbit.
Dual Driver
The operator terminal can communicatewith two components of different manufac-tures; also data exchange between the twodrivers is possible.
Operating Conditions Specifications
Ambient temperature in operation 0 – +50 °C (all E series operator terminals)
Operating temperature range Max. 90 % (non-condensing)
Storage temperature -20 – +60 °C
Noise durability 1000 Vpp tested by noise generator; 1 µs at 30 – 100 Hz
Dielectric withstand voltage 1500 V AC, > 1 min.
Shock resistance 10 G (3 times each in 3 directions)
Vibration resistance 1 G: resistant to vibrations from 10 – 55 Hz for 2 h. along all 3 axes
Insulation resistance > 5 MΩ (500 V DC)
Grounding Class 3 (100 Ω)
Environment Avoid environments containing aggressive gases, install in a dust-free location.
Cooling Self-cooling
Certifications UL / CSA / CE / DNV / RINA / LR
RS232C
7 8 9
ABCD EFGH IJKL
MNOP QRST UVWX
YZ!? C1-C4 < >()
+/*= °%# _'@,
4 5 6
1 2 3
- 5.
PREV HOME NEXT
ALARM ACK
7 8 9
ABCD EFGH IJKL
MNOP QRST UVWX
YZ!? C1-C4 < >()
+/*= °%# _'@,
4 5 6
1 2 3
- 5.
PREV HOME NEXT
ALARM ACK
7 8 9
ABCD EFGH IJKL
MNOP QRST UVWX
YZ!? C1-C4 < >()
+/*= °%# _'@,
4 5 6
1 2 3
- 5.
PREV HOME NEXT
ALARM ACK
NO-Protocol-Mode
Ethernet
Ethernet
PROFIBUS/DP
Dual Driver
13HMI-Catalogue 2008 UK.prn????Freitag, 13. Juni 2008 12:52:17
The E50 is a key-oriented HMIunit with four function keys andan LCD display with two rowsand 16 characters each. It candisplay up to 50 text blocks,which can be paged with thefunction keys. Values can beedited directly with the unit’skeyboard. The RS232C andRS422 ports are both integratedin a 25-pin connector.
The E100 has 4 programmablefunction keys with freely defin-able labels and alternatingfunction assignment. Recipes,passwords and changes can beentered via input keys. The unithas an LCD display with tworows and 20 characters each. Ithas one RS232C port and aRS422 port, which can be con-nected to either two PLCs or aPLC and a printer, bar codereader and other RS232 devices.
The E150 unit features 6 pro-grammable function keys withdefinable labels and numericalkeypad. Recipes, passwordsand editing changes can all beentered and edited directlywith the units keyboard. Theunit offers an LCD display withtwo rows and 20 characterseach. It has one RS232C portand a RS422 port, which can beconnected to either two PLCs ora PLC and a printer, bar codereader and other RS232 devices.
The E200 terminal offers 5 pro-grammable function keys withfreely definable labels and alter-nating function assignment.LEDs indicate the process sta-tus. Recipes, passwords, texts,alarms and changes can beentered via input keys. TheE200 offers an LCD display withfour rows and 20 characterseach. It posses one RS232C portand a RS422 port, which can beconnected to either two PLCs ora PLC and a printer, bar codereader and other RS232 devices.
The E300 has a key-orienteduser interface with programma-ble function keys. The graphicalscreen can display symbols,alarms, graphs and texts in avariety of sizes. Recipes, pass-words, texts, alarms, andchanges can be entered viainput keys.
The E300 terminal offers also aprinter interface and anoptional communication inter-face for network connectionand for optional expansioncards.
The E410 offers built-inEthernet and advanced func-tionality features, includingweb technology – yet takes uponly a handful of space.
The terminal features a mono-chrome touch sensitive displaywith a resolution of320 x 240 pixels.
The E600 features the samefunctions as the E300, but offersadditionally a bigger displayand more function keys.
The operator terminals E610and E615 feature a touch-screen with a resolution of320 × 240 pixels each. Themodel E610 has a 16 grayscalesdisplay and the E615 can show256 colours.
Both operator terminals con bemounted and used horizontalor vertical.
The units have an RS232C,RS422 and RS485 port each aswell as an optional slot for com-munication and expansioncards.
Dimensions WxHxD (mm) 202 x 187 x 63 156 x 119 x 63 275 x 168 x 63 201 x 152 x 63
Weight (kg) 0.9 0.56 1.1 0.87
Order information Art. no. 169297 169298 / 169299 169300 169301 / 169302
Accessories Programming software E-Designer (refer to page 47), cables and interface adapters (refer to page 21), Profibus/DP module (refer to page 24)
The E1012, E1022 and E1032are key-oriented user-friendlyinterfaces with programmablefunction keys. The graphicalscreen of each terminal can dis-play symbols, alarms, historicalgraphs and texts with the use ofwindows fonts. Recipes, pass-words, texts, alarms andchanges can be entered viainput keys.
The E1041 and E1043 termi-nals have a 3.5" TFT touchscreen (65,536 colours or 16grayscales). Recipes, text andediting changes are entered viakeys.
Password levels protect the sys-tem against unauthorisedaccess, while sixteen separatealarm groups keep youinformed on all-importantdevelopments.
The E1060 colour display with65,536 colours and 16 screen-oriented function keys providesuser-friendly operation. Reci-pes,text and editing changesare entered via keys.
Password levels protect the sys-tem against unauthorisedaccess, while sixteen separatealarm groups keep youinformed on all-importantdevelopments.
The operator terminals E1061and E1063 possess the samefeatures as the models E1041and E1043, but with a 5,7" STNdisplay (65,536 colours or 16grayscales) they offers a biggerdisplay unit.
All E1000 operator panels onthis page have two PLC ports, aUSB host port to connectmouse, keyboard, printer andUSB memory sticks as well as anintegrated Ethernet interface.The connection to Profibus/DPis available via a separate exten-sion module.
7 8 9
ABCD EFGH IJKL
MNOP QRST UVWX
PREV HOME NEXT
ALARM ACK
YZ!? C1-C4 < >()
+/*= °%# _'@,
4 5 6
1 2 3
- 5.
7 8 9
ABCD EFGH IJKL
MNOP QRST UVWX
YZ!? C1-C4 < >()
+/*= °%# _'@,
4 5 6
1 2 3
- 5.
PREV HOME NEXT
ALARM ACK
6
Graphical Operator Terminal E1000
16HMI-Catalogue 2008 UK.prn????Freitag, 13. Juni 2008 12:54:04
The operator terminal E1070offers a 6.5" TFT display with65,536 colours and a resolutionof 640 x 480 pixels. 16 freelyprogrammable function keysfacilitate the inputs directly atthe terminal.
The 6.5" TFT colour display ofthe E1071 with 65,536 coloursprovides a user-friendly touchscreen operation. Recipes, textand editing changes areentered via touch keys.
The operator terminal E1100offers a 10.4" TFT display with65,536 colours and a resolutionof 800 x 600 pixels. Freely pro-grammable function keys facili-tate the inputs directly at theterminal.
The operator terminals E1101and E1151 provide auser-friendly TFT colourtouchscreen. The E1101 offers aresolution of 800 x 600 pixels ona 10" screen, the E1151 pro-vides a 15" screen with 1024 x768 pixels.
All E1000 operator terminals onthis page provide two PLCports, a USB host port to con-nect mouse, keyboard, printerand USB memory as well as anintegrated Ethernet interface.Profibus/DP is available via aseparate extension module.
The internal memory of 12 MBcan be expanded.
The integrated password pro-tection protect the systemagainst unauthorised access,and sixteen separate alarmgroups keep you informed onall-important developments.
Using a E1000 Pro+ operatorterminal gives the user all thefunctionality of the standardE1000 family and also makes itpossible to view external filessuch as PDF files, HTML pagesand PowerPoint presentationsdirectly on the screen of theoperator terminal.
The DT1151 is an industrialmonitor with a 15" TFT-LCDtouch screen, designed to bemounted in a cabinet and con-nected to an industrial PC.The monitor is optimized for amaximum resolution of 1024 x768 pixels.
Personal computers are a partof everyday life as Industrial PCsare a part of automation andprocess control.
The new IPC1000 line based onETX technology offers supremecomputing performance withprocessors based on Intel®‘sCeleron/Core Duo at extremelow power consumption.
The ETX technology permitsscalable CPU performances fora wide range of industrial appli-cations. Ruggedly designed forheavy-duty industrial applica-tions and environments, thesePCs feature high quality, fastperformance, attractive designand brilliantly legible displays.
A wide operating and storagetemperature range, toughvibration resistance and high IPratings mean these IPCs can beused in locations users couldnever consider before.
The integrated innovative cool-ing concept realizes passiveand fanless cooling for thehighest processor performanceup to Intel® Celeron/ Core Duo,reducing one of the major mov-ing parts that could fail.
GT15-75J71 LP23-Z GT15 (for optical SI cable) 166312
USB GT15-PRN GT15(for USB connection to pictbridge compatible printers) 170169
* The Converter GT15-RS2T4-9P can not be used with 5.7" GT15 models.
Several communications and interface adapt-ers are available for the GT15 operatorteminals. They support the controlling of PLCsdirectly or within different networks.
Further details on request.
Option Cards for GT15
The operator terminals of the GT15 series areable to use several special functions built intothe terminal. To use multi-channel communi-cation, document display, System Q laddermonitor and MES functionality an optionboard is required. They are fitted in the expan-sion slot on the rear side of the terminal andare recognized automatically by the GT15.
Further details on request.
Option card Application Order number
GT15-FNB Option card for the use of special functions(without System Q support) 166313
GT15-QFNB Option card for the use of special functions(with System Q support) 166314
GT15-QFNB16M Option card for the use of special functions(with System Q support and 16 MB expansion memory for project data) 166315
GT15-QFNB32M Option card for the use of special functions(with System Q support and 32 MB expansion memory for project data) 166316
GT15-QFNB48M Option card for the use of special functions(with System Q support and 48 MB expansion memory for project data) 166317
GT15-MESB48M Option card for the use of additional MES functionality(with System Q support and 48 MB expansion memory for project data) 203473
e. g.:Ethernet adapter
Video Interfaces for GT15
Video unit Application Order number
GT15V-75V4 Video input unit for GT15 video compatible models, 4 x NTSC/PAL inputs 203497
GT15V-75R1 Video input unit for GT15 video compatible models, 1 x RGB composite input 203498
GT15V-75V4R1 Video input unit for GT15 video compatible models, 4 x NTSC/PAL inputs,1 x RGB composite input 203499
GT15V-75ROUT Video input unit for GT15 video compatible models, 1 x RGB compositeoutput 203500
Video interfaces can be used with the GT15video panels to support video functions. Withthe help of these interfaces, images from PC's,cameras and vision sensors can be monitoredon the GOT.
Further details on request.
19HMI-Catalogue 2008 UK.prn????Freitag, 13. Juni 2008 12:58:03
Connection of the Handy Operator Terminals to the PLC CPU
The cable is connected to the plug on theback side of the F940GOT, which provides alarger operating range than fixed mountedterminals. The cable is lead into the cabinetor panel and enables the mobile connec-
tion of the Handy GOT using the interface ina cabinet or control panel. The GT11 handyterminals carry a bayonet-joint at the lowerend of the unit.
From there it is easy to connect the line tothe PLC.
Special Connection Cables for the Graphic Handy Operator Terminals
Connector 2 D-SUB male connector 25 pin MINI-DIN male connector 8 pin D-SUB male connector 25 pin MINI-DIN male connector 6 pin
Further connections — For power supply and external signals For power supply and external signals For power supply and external signals
Applicable CPU type — MELSEC FX family MELSEC AnS/QnAS and AnU/QnA MELSEC System Q
Length m 3.0 1.5 1.5 1.5
Order information Art. no. 130213 130299 130212 142538
For the connection of the PLC CPU a further cable is required (F9GT-HCAB2-150 for MELSEC FX CPU or F9GT-HCAB3-150 for MELSEC AnS/QnAS CPU or F9GT-HCAB5-150 for MELSEC System Q CPU)
Order information Art. no. 191013 / 191014 / 191015 191016 / 191017 / 191018 191019 191020 191021
For the connection of the PLC CPU a further cable is required (GT11H-C15R4-8P for MELSEC FX CPU or GT11H-C15R4-25P for MELSEC AnS/QnAS CPU or GT11H-C15R2-6P for MELSEC System Q CPU)
Protective film sheets protect the sensitive screenof the unit from scratches and reflections.
Stands
For the GT11 and GT15 terminals stands fortable-top installation are available. The stands areuseful for debugging the GOT screen data, as theycan set the GOT at a proper angle on the table.
Keyboard extension MAC E-Key-16
For all E series graphical operator terminals (E 300and higher) the keyboard extension E-Key-16 isavailable.
Up to 4 keyboard extensions can be connected toone operator terminal.
The keyboard extension provides 16 function keysand LEDs, which can be used and programmed asthe standard integrated keyboard.
Specifications GT10-20PSCB
GT10-30PSCB
GT11-50PSCB
GT11H-50PSC
GT15-50PSCB
GT15-60PSCB
GT15-70PSCB
GT15-80PSCB
GT15-90PSCB
F9GT-30PSC
F9GT-40PSC
Type of accessory Protective film sheets for the display surface
Use for operator terminal GT1020 GT1030 GT11 GT11Hhandy GOTs
GT155x with5,7" display
GT15 with8,4" display
GT15 with10,4" display
GT15 with12.1" display
GT15 with15" display F930GOT F940GOT-LWD/
SWD-E
Set of 5 5 5 5 5 5 5 5 5 5 5
Order information Art. no. 200501 206973 163645 191023 203501 166329 166333 166337 169476 145323 126743
Specifications E1032 Protecti-on Sheet
E1041/43Touch Protecti-on Sheet
E1060 Protecti-on Sheet
E1061/63Touch Protecti-on Sheet
E1070 Protecti-on sheet
E1071 TouchProtectionsheet
E1100 Protecti-on sheet
E1101 TouchProtectionsheet
E1151 TouchProtectionsheet
Type of accessory Protective film sheets for the display surface
Use for operator terminal E1032 E1041/43 E1060 E1061/63 E1070 E1071 E1100 E1101 E1151
Set of 1 1 1 1 1 1 1 1 1
Order information Art. no. 206836 206837 206838 206839 168155 168122 168156 168123 168154
Specifications GT05-50STAND GT15-70STAND GT15-80STAND GT15-BAT MAC E-Key-16
Type of accessory Stand for table-top installation Buffer battery for realtime clockand historical data backup
External keyboard extension forE series
Use for operator terminal GT11 and GT15 with5.7" display
GT15 with8.4" or 10.4" display
GT15 with12.1" display GT15 E300/E600/E610/
E615/ E1000 series
Set of 1 1 1 1 1
Details — — — Lithium battery Connection via RS232C/RS422
Order information Art. no. 203502 166341 166342 166345 148995
24HMI-Catalogue 2008 UK.prn????Freitag, 13. Juni 2008 13:01:32
For the E1000 series a Profibus/DP Slaveadapter E1000-EM-Profibus/DP is available.This is attached at the extension port at therear side of the control terminal. Theparametrization and setting of the networkaddress are made in the software E-Designer.
Ethernet interface card
The optional MAC-IFC-ETTP interface card isused for Ethernet connection with twisted paircable.
Profibus/DP card
The MAC-IFC-PBDP/E PROFIBUS/DP inter-face board supports the connection of thecontrol units of the MAC E series to aPROFIBUS/DP network.
MELSOFT – Programming and Documentation Software for Standard Personal Computers
With the MELSOFT software family Mitsubishi Electric offers efficient software packageshelping to reduce programming and setup times to a high degree.
The MELSOFT software family provides instant access, direct communications, compatibil-ity, and open exchange of variables.
The MELSOFT family comprises: Programming packages like GX Developer and GX IEC Developer Software for a dynamic data exchange like MX Change Visualization software like for example MX4 HMI Programming software for GOT operator terminals GT-Works Programming software for E series operator series E-Designer PC-based HMI systems for GOT operator terminals GT SoftGOT1000
For detailed information please order our separate MELSOFT brochure.
Visualization Software MX4 HMI
MX4 HMI
MX4 HMI is a reduced version of MX4 SCADA. It includes many of the functions ofMX4 SCADA, but has been designed for standalone HMI applications.
The main features are:
A large number of I/O points ranging from 100 to a maximum of 600, with the ability toconnect to three different types of drivers.
It is a scalable solution that can be upgraded from a HMI to a SCADA solution and thenhave additional upward connectivity to business systems.
Basic functions like alarms, trend analysis and reports have been set-up and areready-to-use, saving you time and the expertise needed to program them.
The use of super genies enables you to save repetitive machinery processes, and repli-cate the process by a click of a button. This saves time and the cost of skilled labour, al-lowing a complex task to be performed much more simply.
Specifications Development version/ Demo version Run-Time version
Systemrequirements
computer Pentium based 266 MHz or compatible PC with MS Windows NT®,MS Windows 2000® or MS Windows XP®
memory Min. 96 MB (MS Windows NT®)
Free harddisk space 200 MB
Networks TCP/IP (using ETHERNET), UDP
Operating system MS Windows NT/2000® or MS Windows XP®
Driver FastLinx (included with MX4)
Order information Art. no. 153421 On request
45HMI-Catalogue 2008 UK.prn????Freitag, 13. Juni 2008 13:19:00
GTWorks2 is a wide-ranging programming and visualization control tool from Mitsubishi.Included are the two main program parts GT SoftGOT1000 and GT Designer2 as well as aHMI simulator and a converter for former projects. The software language is English,a German version is also available. Please remark when ordering.
GT SoftGOT1000
A major benefit of GT SoftGOT1000 is that visualisation screens can be created independ-ently of their final target platform, i. e. a hardware platform such as GOT900 or GOT1000 or aPC based platform such as GT SoftGOT1000. This is a PC based HMI module withinGTWorks2. A further benefit of GT SoftGOT1000 is that it inherits the advanced simulationfeatures of GTWorks2. It can be simulated in a stand-alone configuration or in conjunctionwith GX Simulator, linking both PLC and HMI simulation code for a true integrated approach.
Platform independent, screens created can be used for software-based HMIs or hard-ware based GOT HMIs.
Remote monitoring and operation by intranet LAN is possible. E-mail support for alarms Recording of historical Data in user-friendly formats Communication with MELSEC PLCs via serial communication, USB (to System Q port),
CC-Link IE PC card or Ethernet possible Windows and Microsoft programs can be accessed from within GT Soft GOT1000.
GT Designer2
As further part of GTWorks2, GT Designer2 is a drawing program designed to create HMIscreens for all GOT series. A user-friendly Windows environment provides the user with asimple and recognisable interface, reducing the time of their learning curve and the trainingcosts associated with it. The package consists of: An extensive picture and graphics library editor that enables you to modify the
graphics to meet your exact specifications. A tree format of the project gives you an overview of the structure of the project. This
gives you the opportunity to navigate through your project and add, delete or moveany programs or functions, creating a more logical flow to your menu structure.
Specifications GT Works2: GT SoftGOT1000
Application for All GOT operator terminals
Software language English, German
Operating system MS Windows 98®, MS Windows ME®, MS Windows NT 4.0® or higher ,MS Windows 2000®, MS Windows® XP
System requirements Pentium II PC with at least 300 MHz, 128 MB RAM and 400 MB free harddisk space
Required computer interface RS232C, USB, Ethernet
Required dongle interface USB or parallel port (dongle included in the package)
Order information Art. no.
Full version: English with USB dongle: 214653Full version: English with parallel port dongle: 214650Full version: German with USB dongle: 210822Full version: German with parallel port dongle: 210820
The combination of GT Simulator andGX Simulator allows you to test boththe HMI and PLC coding offline, on yourPC without the need to connect tophysical hardware.
Configuration of up to ten languages inthe application, easy to edit by usingthe open Excel format
Specifications GTWorks2: GT Designer2
Application for All GOT operator terminals
Software language English, German
Operating system MS Windows 98®, MS Windows ME®, MS Windows NT 4.0® or higher,MS Windows 2000®, MS Windows® XP
System requirements Pentium II PC with at least 300 MHz, 128 MB RAM and 400 MB free harddisk space
Required computer interface RS232C, USB, Ethernet
Order information Art. no. Full version: English: 214646 2 licences and more: 214647Full version: German 210816 2 licences and more: 210817
46HMI-Catalogue 2008 UK.prn????Freitag, 13. Juni 2008 13:19:10
Software language English, german, spanish, italian, french, swedish
Storage media CD-ROM
Operating system MS Windows 98®, MS Windows ME®, MS Windows NT 4.0®, MS Windows 2000®, MS Windows® XP
System requirements PC with at least 32 MB RAM and 55 MB free harddisk space
Required computer interface RS232C, Ethernet
Version Full version 7.30 Upgrade version (from version 6.x to 7.x) Update version (minor version change in version 7.x)
Order information Art. no. 210930 210931 210932
Programming HMI
Programming Software for all E Series Operator Terminals
The programming software E-Designer provides easy creation of projects for all controlunits in the MAC E series.
The block manager displays the application graphically and clearly and saves time for thecreation.
E-Designer supports the following languages on the desktop:english, german, spanish, italian, french, swedish
Full support of the Windows editing functions (e.g. cut, copy, paste etc.) Extensive documentation and storage functions Different projects can be edited simultaneously. Multi-language support for up to 10 languages in the application The name list is compatible to GX IEC Developer. E-Designer is supported by MX-Change. Simulation mode for E1000 projects
47HMI-Catalogue 2008 UK.prn????Freitag, 13. Juni 2008 13:19:20
The use of HMI technology has beenincreasing as manufacturers increasinglydemand information in realtime. Theboundries between “shop floor” data andbusiness operation/process data is fastbecoming blurred and places higherdemands on visualisation and data pro-cessing tools to span the wide range of“new” applications.
New challengesUsing visualisation tools to support main-tenance has never been high on theagenda of machine and process engineers,but if system downtime is considered asone of the most costly problems manufac-turers face, then why not? HMI screen’s canbe configured to easily report on all of thecritical control aspects of a system aidingefficient problem diagnosis.
Visualisationand productivity
In fact some HMIs have the ability to reporterrors remotely, even contacting the main-tenance team before the line operators areaware there is a problem. The potential ofvisualisation tools to improve process“uptime” is enormous.
The Business CycleFast data retrieval, greater transparencyrequire simplier and more effiecient con-trol architectures. Because of this thedemand for high reliability SCADA and PCbased solutions is critical especially whenfeeding data in to a businesses central MESand ERP systems. But even now it is possi-ble to see a future trend for embedingdirect MES functionality in to PLC stationsand high function HMIs. This can providehuge gains for the manufacturer, i.e.;reducing system complexity by removing alayer of intermedary PCs; increased datasecurity by providing quicker respose andindustrialised hardware; localised controlpoints giving increased access to vital infor-mation.
e-F@ctoryAs a manufacturer and supplier of automa-tion products Mitsubishi Electric has longrecognised these key issues and has devel-oped solutions for its own complex pro-duction needs. This has resulted in manyinnovations such as GOT displays that have“built in” maintetance screens as well as theability to review and monitor PLC pro-grams. Other advances include MES inter-faces for direct connection of PLC and HMItechnology to MES SQL databases.
Mitsubishi’s Vision1000 visualisation solu-tions are a clear part of today’s e-F@ctoryhelping manufacturers increase productiv-ity in a scalable and reliable way.
HMI technology can easily consolidate information at one point.
14
A world ofautomation solutions
Mitsubishi offer a wide range of automation equipment from PLCs and HMIs to CNC and EDM machines
A name to trustSince its beginnings in 1870, some 45 com-panies use the Mitsubishi name, covering aspectrum of finance, commerce and industry.
The Mitsubishi brand name is recognizedaround the world as a symbol of premiumquality.
Mitsubishi Electric Corporation representsspace development, transportation, semi-conductors, energy systems, communica-tions and information processing, audiovisual equipment, home electronics, build-ing and energy management and automa-tion systems, and has 237 factories andlaboratories worldwide in over 121 countries.
This is why you can rely on a Mitsubishiautomation solution – because we knowfirst hand about the need for reliable, effi-cient, easy-to-use automation and control.
As one of the world’s leading companieswith a global turnover of 3.4 trillion Yen(approximately $30.8 billion), employingover 100,000 people, Mitsubishi Electrichas the resource and the commitment todeliver the ultimate in service and supportas well as the best products.
Robots
Motion control and servos
Inverters
HMI and GOTs
Micro PLCs
EDM machines
CNCcontrollers
Laser machines
LV circuit protection
Modular PLCs
Enterprise PC(MES/ERP/SCADA)
Pressurestorage tank
Remote I/Os
Transportconveyor (OUT)
Rotationalconveyor
Transportconveyor (IN)
Local HMI, plantwide information
Servo amplifiers
Filling tubes
PLCFrequency Inverter
Global partner. Local friend.
MITSUBISHIELECTRIC
FACTORY AUTOMATION
MITSUBISHIELECTRIC
FACTORY AUTOMATION
System and Process Visualisation /// Touch Screen and Key Operation ///Powerful Maintenance Tools /// PLC Program Display /// Direct MESIntegration /// HMIs /// GOTs /// IPCs /// SCADA /// Software ///
HMIVisualisation Tools
Powerful CommunicationSimple Words and Pictures
Mitsubishi Electric Europe B.V. /// FA - European Business Group /// Gothaer Straße 8 /// D-40880 Ratingen /// GermanyTel.: +49(0)2102-4860 /// Fax: +49(0)2102-4861120 /// [email protected] /// www.mitsubishi-automation.com
Specifications subject to change /// Art. no. 207075-B /// 06.2008All trademarks and copyrights acknowledged.
EUROPEAN BRANCHES
CZECH REPUBLICMITSUBISHI ELECTRIC EUROPE B.V.Radlicka 714/113 aCZ-158 00 Praha 5Phone: +420 251 551 470
FRANCEMITSUBISHI ELECTRIC EUROPE B.V.25, Boulevard des BouvetsF-92741 Nanterre CedexPhone: +33 (0)1 / 55 68 55 68
GERMANYMITSUBISHI ELECTRIC EUROPE B.V.Gothaer Straße 8D-40880 RatingenPhone: +49 (0)2102 / 486-0
IRELANDMITSUBISHI ELECTRIC EUROPE B.V.Westgate Business Park, BallymountIRL-Dublin 24Phone: +353 (0)1 419 88 00
ITALYMITSUBISHI ELECTRIC EUROPE B.V.Viale Colleoni 7I-20041 Agrate Brianza (MI)Phone: +39 039 / 60 53 1
SPAINMITSUBISHI ELECTRIC EUROPE B.V.Carretera de Rubí 76-80E-08190 Sant Cugat del Vallés (Barcelona)Phone: 902 131121 // +34 935653131
UKMITSUBISHI ELECTRIC EUROPE B.V.Travellers LaneUK-Hatfield, Herts. AL10 8XBPhone: +44 (0)1707 / 27 61 00
EUROPEAN REPRESENTATIVES
AUSTRIAGEVAWiener Straße 89AT-2500 BadenPhone: +43 (0)2252 / 85 55 20