Hitachi

4

4

4

Get the future. Today.

4THE NEXT STAGEOCTOBER - DECEMBER 2012

4THE NEXT STAGE

4Hitachi's brushless motors provide higher capacity specifications compared to conventional brushed motors due to no loss of power from friction & sparking

4

When combined with 4.0Ah batteries, brushless motors significantly increase runtime efficiency.

Hitachi 18V slide platform is fully compatible with 4.0Ah, 3.0Ah and 1.5Ah Hitachi Li-ion batteries.

4Ultra high capacity 4.0Ah batteries provide 33% longer run time over 3.0Ah batteries increasing productivity and less down time.

Same size as 3.0Ah batteries but greater capacity.

*Measured maximum hard torque when using 4.0Ah Li-ion batteries - BSL1840

Introducing the new DV18DSDL 18V slide impact driver drill with 4.0Ah Lithium-ion (Li-ion) batteries!

Hitachi’s all new offering features a huge 96Nm* of hard torque at a price that is hard to believe. This is the ultimate value cordless drill and features a 13mm heavy duty metal chuck, 2 speed gearbox with all metal gears, 22 stage adjustable clutch, LED light and battery power indicator all encased in a super ergonomic soft grip handle.

Paired with new ultra high capacity 4.0Ah Li-ion batteries and featuring Hitachi’s unrivalled ‘Multiple Protection Circuit’ technology, Hitachi has created the ultimate cordless drill.

Innovation at its best.

Multiple Protection Circuit

Heat Sensor

Brushless motorequipped model

UB18DALTorch

WR18DBDLImpact Wrench

WR18DSHLHigh Torque Impact Wrench

DS18DSFLDriver Drill

DS18DSLDriver Drill

DS18DSDLDriver Drill

DS18DBLDriver Drill

WH18DSALImpact Driver

WH18DSLImpact Driver

WH18DBDLImpact Driver

WM18DBLElectronic Pulse Driver

DV18DSFLImpact Driver Drill

DV18DSLImpact Driver Drill

DV18DSDLImpact Driver Drill

DV18DBLImpact Driver Drill

UB18DSLLantern

CG18DSDLGrass Trimmer

CH18DSLHedge Trimmer

RB18DSLBlower & Vacuum

R18DSLWet & DryVacuum

UR18DSLRadio

CJ18DSLJig Saw

C18DSLCircular Saw

CR18DSLReciprocatingSaw

G18DSL125mm Angle Grinder

DH18DSLRotary Hammer

ONE SYSTEM

ONE SOLUTION.BSL1840 4.0Ah Li-ion BatteryBSL1815 1.5Ah Li-ion Battery

Get the future. Today.

Includes 2 x 4.0Ah Li-ion batteries with MPC, cooling charger and carry case

Includes 2 x 4.0Ah Li-ion batteries with MPC, cooling charger and carry case

Includes 2 x 4.0Ah Li-ion batteries with MPC, cooling charger and carry case

Batteries & charger sold separatelyIncludes AC adaptor, Batteries & charger sold separately

18V Slide Reciprocating Saw CR18DSL

Includes 2 x 4.0Ah Li-ion batteries with MPC, cooling charger and carry case

18V Slide 125mm Angle Grinder G18DSL

18V Slide Circular Saw C18DSL 18V Slide Jig Saw CJ18DSL

• Blade can be loaded in upward or downward direction • Tool-less blade change

• 165mm blade with cutting capacity up to 57mm • Electric brake and magnesium blade cover

• Lightweight at 1.8Kg • Safety overload circuit and anti-start safety override when replacing batteries

• Three mode orbital action or straight cut• Tool-less blade change

18V Slide Driver Drill DS18DSFL

18V Slide Impact (Hammer) Driver Drill DV18DSFL

Includes 2 x 1.5Ah Li-ion batteries with MPC, charger and carry case

Includes 2 x 1.5Ah Li-ion batteries with MPC, charger and carry case

• 13mm keyless chuck• 2 Speed gearbox with all metal gears

• 13mm keyless chuck• 2 Speed gearbox with all metal gears

18V Slide Li-ion Range

Also available: ‘Naked’ CR18DSL(H4)

Also available: ‘Naked’ G18DSL(H5)

18V Slide Wet & Dry Vacuum R18DSL(H4)

• Capable of approx. 40mins continuous run time when using 4.0Ah battery • Semi transparent dust case

Batteries & charger sold separately

18V Slide Blower & Vacuum RB18DSL(H4)

• Capable of approx. 27mins continuous run time when using 4.0Ah battery• Can be converted to vacuum with optional accessory: dustbag 323587

* Only available 'Naked'* Only available 'Naked'* Only available 'Naked'

18v Slide Grass Trimmer CG18DSDL(H4)

Batteries & charger sold separatelyBatteries & charger sold separately

18V Slide Hedge Trimmer CH18DSL(H4)

• Hitachi's unique efficient disc motor• 38V boost circuit increases power under load

• 520mm bar with dual action cutting teeth• 15mm cutting capacity

Also available: CG18DSDL(HV) Also available: CH18DSL(HL)

Also available: ‘Naked’ C18DSL(H4) Also available: ‘Naked’ CJ18DSL(H4)

18V Slide Rotary Hammer Drill DH18DSL

Includes 2 x 4.0Ah Li-ion batteries with MPC, cooling charger and carry case

• SDS plus chuck with 16mm max drilling capacity• Two mode action: hammer drilling / drilling

Also available: ‘Naked’ DH18DSL(H4)

Also available: 'Naked' DS18DSFL(H4)

Also available: 'Naked' DV18DSFL(H4)

AM/FM Radio UR18DSL(H4)

• Compatible with all Hitachi 9.6V - 18V slide & cassette batteries (excluding 10.8V)• Compatible with mp3 and cd players

New 125mm (5'') Model!

4 444

18V Slide Impact Wrench WR18DBDL

Includes 2 x 4.0Ah Li-ion batteries with MPC, cooling charger and carry case

• 250Nm tightening torque • 30% More efficient Hitachi brushless motor

18V Slide Impact (Hammer) Driver Drill DV18DBL

Includes 2 x 4.0Ah Li-ion batteries with MPC, cooling charger and carry case

18V Slide Driver Drill DS18DBL

• 30% More efficient Hitachi brushless motor• 4 Stage speed selector and electronic switch - 50% less trigger force required

18V Slide Driver Drill DS18DSL

18V Slide Impact (Hammer) Driver Drill DV18DSL 18V Slide Impact (Hammer) Driver Drill DV18DSDL

18V Slide Driver Drill DS18DSDL

Includes 2 x 4.0Ah Li-ion batteries with MPC, cooling charger and carry case

Includes 2 x 4.0Ah Li-ion batteries with MPC, cooling charger and carry case

Includes 2 x 4.0Ah Li-ion batteries with MPC, cooling charger and carry case

Includes 2 x 4.0Ah Li-ion batteries with MPC, cooling charger and carry case

Includes 2 x 4.0Ah Li-ion batteries with MPC, cooling charger and carry case

• 13mm single sleeve metal keyless chuck with automatic spindle lock• 2 Speed gearbox with all metal gears

• 13mm single sleeve metal keyless chuck with automatic spindle lock• 2 speed gearbox with all metal gears

• 13mm single sleeve metal keyless chuck with automatic spindle lock• 2 speed gearbox with all metal gears

• 13mm single sleeve metal keyless chuck with automatic spindle lock• 2 Speed gearbox with all metal gears

18V Slide Impact Driver WH18DBDL

Includes 2 x 4.0Ah Li-ion batteries with MPC, cooling charger and carry case

18V Slide Impact Driver WH18DSL

Includes 2 x 4.0Ah Li-ion batteries with MPC, cooling charger and carry case

18V Slide High Torque Impact Wrench WR18DSHL18V Slide Impact Driver WH18DSAL

Includes 2 x 1.5Ah Li-ion batteries with MPC, charger and carry case

• 145Nm tightening torque• Lightweight at 1.5Kg

• 145Nm tightening torque • Two power mode: save mode for small bits or power mode for larger bits

• 30% More efficient Hitachi brushless motor• 4 Stage speed selector and electronic switch - 50% Less trigger force required

• 165Nm tightening torque • 30% More efficient Hitachi brushless motor

Also available: ‘Naked’ DV18DBL(H4)

Also available: ‘Naked’ WR18DBDL(H4)

Also available: ‘Naked’ WH18DBDL(H4)

Includes 2 x 4.0Ah Li-ion batteries with MPC, cooling charger and carry case

• 480Nm tightening torque • Forward & reverse rocker switch

Also available: ‘Naked’ WR18DSHL(H4)

Also available: ‘Naked’ DS18DBL(H4)

Also available: ‘Naked’ WH18DSAL(H4)

Also available: ‘Naked’ WH18DSL(H4)

Also available: 'Naked' DS18DSL(H4) Also available: 'Naked' DS18DSDL(H4)

Also available: 'Naked' DV18DSL(H4) Also available: 'Naked' DV18DSDL(H4)

Also available: ‘Naked’ WM18DBL(H4)

18V Slide Electronic Pulse Driver WM18DBL

Includes 2 x 4.0Ah Li-ion batteries with MPC, cooling charger and carry case

• 30% More efficient Hitachi brushless motor• 5 Operation modes - easily select the right function for the right job

Get the future. Today.

• Fires 50 - 90mm 34° framing nails• Sequential & bump fire trigger• Tool-less depth dial• Industrial strength top housing

• Fires 32 - 65mm DA series finish nails• Sequential & bump fire trigger• Tool-less depth dial• Integrated air duster

DA Finish Nailer NT65MA4Framing Nailer NR90AD

Pneumatics

Hitachi Li-ion batteries have a multiple protection circuit fitted that monitors every cell in the battery.

This protects the battery and tool by providing overload protection which stops the tool instantly in the event of a jam or overload. It gives over charge and over discharge protection which ensures the battery life is extended.

Multiple Protection Circuit

Air vents for cooling between

cells

Heat sensor

18V Slide Li-ion Range

MPC 18V Li-ion Combination Pack SMPS18(HW)

13 Piece Pack Includes:• DV18DBL - Brushless impact (hammer) driver drill• WH18DBDL - Brushless impact driver • WR18DBDL - Brushless impact wrench• CR18DSL - Reciprocating saw• C18DSL - Circular saw • CJ18DSL - Jig saw • DH18DSL - Rotary hammer• G18DSL - 125mm angle grinder• RB18DSL - Blower vacuum• R18DSL - Wet & dry vacuum• UR18DSL - Radio• UB18DSL - Lantern• UB18DAL - Torch • 4 x BSL1840 - 4.0Ah Li-ion batteries with MPC• 2 x UC18YRSL - Cooling charger• 2 x Site bags

4 444

C Series Brad Nailer NT65M2

• Fires 25 - 65mm C series brad nails• Sequential & bump fire trigger• Tool-less depth dial• Integrated air duster

C1 Series Brad Nailer NT50AE2

• Fires 16 - 50mm C1 series brad nails• Sequential & bump fire trigger• Tool-less depth dial

Also available: 16 - 32mm C1 series brad nailer NT32AE2

Narrow Crown Stapler N3804AB3

• Fires 13 - 38mm 6000 series narrow crown staples• Sequential & bump fire trigger• Tool-less depth dial

Thanks to advances in battery technology, Lithium Ion batteries weigh up to 40% less than their Ni-Cd and Ni-MH equivalent. Each Lithium Ion cell can store considerably more energy than older style battery technology. Lightweight batteries mean lightweight tools! This results in reduced user fatigue during extended work periods.

Li-ion

18V Li-ion Combination Pack KC18DJL

18V Li-ion Combination Pack KC18DKL(HA)

2 piece pack includes:• DV18DSDL Impact (hammer) driver drill• WH18DSAL Impact driver• 2 x 4.0Ah Li-ion slide batteries with MPC• UC18YRSL Cooling charger • Carry case

2 piece brushless pack includes: • DV18DBL Impact (hammer) driver drill• WH18DBDL Impact driver• 2 x 4.0Ah Li-ion slide batteries with MPC• UC18YRSL Cooling charger • Carry case

Also available: KC18DOL2 piece brushless pack includes:• DV18DBL Impact (hammer) driver drill• WR18DBDL Impact wrench• 2 x 4.0Ah Li-ion slide batteries with MPC• UC18YRSL Cooling charger • Carry case

Get the future. Today.

• 550W motor• 13mm keyless chuck• Reversible with variable speed

Also available: 16mm Impact Drill DV16VSS

18mm Impact Drill DV18V

• 690W motor• 13mm keyless chuck• Variable speed with reverse

24mm 3 Mode Rotary Hammer DH24PC3

28mm 3 Mode Rotary Hammer DH28PC

• 800W motor • SDS plus chuck with 3.2 joules impact• 24mm max drilling & 50mm core drilling capacity

• 720W motor• SDS plus chuck with 3.5 joules impact• 28mm max drilling & 80mm core drilling capacity

30mm 3 Mode Rotary Hammer DH30PC2

• 850W motor• SDS plus chuck with 5.4 joules impact• 30mm max drilling & 90mm core drilling capacity

13mm Impact Drill DV13VSS

40mm Drill With Safety Clutch D13VB3

• 790W motor• 2 Speed gearbox• 13mm keyless chuck

20mm Impact Drill DV20VB2

• 730W motor • 2 Speed gearbox • 13mm keyed chuck

Drilling

Featuring:

• 3 Mode action :

- Hammer drilling

- Drilling only

- Chiseling

• Idle stricking mechanism

• SDS plus chuck

• Powerful 3.5 joules impact

• Compact 316mm length

DH28PC28mm 3 Mode Rotary Hammer

Suitable for plumbing, electrical, carpentry and heavy duty concrete drilling applications

• 620W motor• SDS plus chuck with 1.4 joules impact • 22mm max drilling capacity

22mm 2 Mode Rotary Hammer DH22PG

4 444

260mm Slide Compound Saw C10FSB

100mm Belt Sander SB10V2

• 1020W motor• Variable speed dial control• Lightweight at 5.2Kg

1/3 Sheet Orbital Sander FSV10SA

• Hook & loop base or clamp system• Includes punch plate & dust bag• Lightweight at 1.3Kg

D Handle Jig Saw FCJ65V3

• 400W motor• Variable speed• Compact & lightweight

185mm Circular Saw C7SB2-K

• 1710W motor • Lightweight at 4.6Kg• Aluminium base with 60mm depth of cut

Includes 2 x blades and carry case

235mm Circular Saw C9SA2

• 2000W motor • Lightweight at 6.8Kg• Aluminium base with 86mm depth of cut

125mm Random Orbital Sander SV13YB

• 230W motor• Lightweight at 1.4Kg• High dust collection

Wood Work305mm Slide Compound Saw with Laser C12RSH

• 1520W motor• 107 X 312mm cutting capacity • Zero clearance slide structure

• 1450W motor• 85 X 312mm cutting capacity• V-belt drive

216mm Slide Compound Saw C8FSE

• 1050W motor • 75 X 262mm cutting capacity • Positive mitre stops

255mm Compound Mitre Saw C10FCE2

• 1520W motor • 89 X 101mm cutting capacity • Positive mitre stops

190mm Circular Saw C7MFA

Includes 2 x 40t blades

• 1010W motor • Lightweight at 3.6Kg• Aluminium base with 68mm depth of cut

110mm D-Handle Jig saw CJ110MV

• 720W motor, variable speed at 1.5Kg• Three mode orbital action or straight cut and tool-less blade change by lever

Also available: 305mm slide compound saw with Laser Marker and digital readout C12LSH

Also available: 125mm variable speed orbital sander SV13YA

Also available: 110mm barrel handle jig saw CJ110MVA

Also available: 76mm belt sander SB8V2

Also available: 216mm slide compound saw with Laser Marker & LED light C8FSHE

Also available: 260mm slide compound saw with Laser Marker C10FSH

Also available: 255mm compound mitre saw with Laser Marker C10FCH2

Get the future. Today.

Shear CE16SA

• 400W motor• Lightweight & compact at 1.7Kg• 1.6mm cutting capacity

16.5KG Demolition Hammer H65SB2

Includes 1 x chisel, 1 x point and case

• 1400W motor • 42 joules impact energy• 30mm hex drive

Nibbler CN16SA

• 400W motor• 1.6mm cutting capacity • 3 Position die holder

5.9KG Demolition Hammer H45MRY

• 950W motor with 12.7 joules impact• SDS max chuck• 12 Angle chisel position

40mm 2 Mode Rotary Hammer DH40MRY

• 950W motor• SDS max chuck with 10 joules impact• 40mm max drilling & 105mm core drilling capacity

Featuring:

• Paddle (deadman) switch

• Constant speed

• Anti-kickback

• Overload protection

• Soft start

• Restart protection

• Anti-vibration side handle

• 1430W motor

• Lightweight at 2Kg

G13YC2Angle Grinder

Suitable for mining, petroleum and heavy engineering industries

130mm Reciprocating Saw CR13VBY130mm Reciprocating Saw CR13V

• 1150W motor• Tool-less blade change with 2 mode cutting action• Lightweight at 4.4Kg

• 1010W motor• Tool-less blade change • Lightweight at 3.2Kg

• 950W motor• SDS max chuck with 9 joules impact• 38mm max drilling & 105mm core drilling capacity

Construction38mm 2 Mode Rotary Hammer DH38MS

4 444

Also available: 100mm Angle Grinder Cutting Pack G10SR3-CWP

180mm Angle Grinder G18SE3

• 2400W motor• Anti vibration side handle• Tool-less guard

Cut Off Machine & Angle Grinder Kit Pack 224

Pack Includes:• 2400W, 355mm cut off machine• 730W, 100mm angle grinder pack

230mm Angle Grinder G23UB2

• 2400W motor• Soft start and anti vibration handle• Tool-less guard

100mm Angle Grinder Pack G10SR3-BP

Pack includes:• 730W Angle grinder • 3 x Cutting wheels • 1 x Grinding wheel• 1 x Diamond wheel • 1 x Tape measure• Carry case

125mm Angle Grinder G13YF

• 1430W motor• Soft start, constant speed control, overload protection, kick back protection, 0 voltage restart• Tool-less guard

230mm Angle Grinder G23SE2230mm Angle Grinder G23SS

• 2400W motor• Anti vibration handle• Tool-less guard

• 1900W motor• Shaft lock button for easy wheel change• Deadman switch

100mm Angle Grinder With Paddle Switch G10SQ

• 840W motor• 196mm ultra slim grip circumference• Paddle (deadman) switch

180mm Angle Grinder G18UBY

• 2400W motor • Soft start, vibration absorbing main and side handle and deadman switch

Metal Work125mm Angle Grinder Cutting Pack G13SR3-CWP

Pack includes:• 730W Angle grinder• 10 x Cutting wheels • 1 x Grinding wheel• 1 x Tape measure• Carry case

Also available: 125mm Angle Grinder Pack G13SR3-BP

Also available: 125mm Angle Grinder With Paddle Switch G13SQ

125mm Variable Speed Angle Grinder G13VA 125mm Angle Grinder With Paddle Switch G13YC2

• 1430W motor• Soft start, constant speed control, overload protection, kick back protection, 0 voltage restart• Variable speed by dial

• 1430W motor• Soft start, constant speed control, overload protection, kick back protection, 0 voltage restart• Paddle (deadman) switch

Get the future. Today.

DISCLAIMERPrices effective from the 01/10/2012 to 31/12/2012 unless stock is sold out. All prices include GST unless otherwise marked. Prices and products are current at the time of printing but are subject to change without notice. Prices in this catalogue are a guide only, prices may vary from store to store. Accessories not included unless otherwise stated. Illustrations are for display purpose only. Not all items shown in this brochure are held in stock by retailers at all times. Orders can be taken for product not held in stock at time of enquiry. Errors and Omissions Excepted (E&OE). Brochure prepared by Hitachi Power Tools Australia Pty Ltd ABN 27 072 677 153 for use by participating retailers. www.hitachi-powertools.com.au

To contact Hitachi Power Tools Australia scan this QR code or call 1300 4 HITACHI

120 Piece Drill and Drive Bit Set 799962

• Hard plastic carry case for safe and easy storage• Suitable accessories for metal, wood, plastic and masonry applications

35 Piece Hi-Torq Bit Set 728699

• Impact rated for the toughest jobs• Hard plastic storage case for storage and durability

45 Piece Drill and Drive Bit Set 115006

• Hard plastic storage case for storage and durability• Suitable accessories for metal, wood, plastic and masonry applications

18 Piece Hi-Torq Bit Set 728698

• Impact rated for the toughest jobs• Carry pouch for convenient storage

10.8V Mini Grinder GP10DL(H4)

• Compact & slim soft grip body • Lightweight at 0.48kg• Anti-start safety override

Includes 42 accessories, batteries & charger sold separately

Tools & Accessories

102 Piece Drill and Drive Bit Set 728492

• Hard plastic carry case for safe and easy storage• Suitable accessories for metal, wood, plastic and masonry applications

50 Piece Drill and Drive Bit Set 799961

• Hard plastic carry case for safe and easy storage• Suitable accessories for metal, wood, plastic and masonry applications

10.8V Li-ion Combination Pack KC10DFL

2 piece pack includes:• DS10DFL Driver drill• WH10DFL Impact driver• 2 x 1.5Ah Li-ion batteries with MPC• UC10SFL Charger • Carry bag

*Images for illustration purposes only

***

* * *