Hirose Circular Connectorshrs.hiroseusa.com/WebEx_presentations/WebEx_Circular.pdfWhy use Hirose Circular Connectors? •Broad range of types and mounting styles ... Insulator Spring
This document is posted to help you gain knowledge. Please leave a comment to let me know what you think about it! Share it to your friends and learn new things together.
•Continuously supported by knowledgeable and experienced staff
6/22/2004 3
Plastic outer housings
HR12HR30RPRP6RP13RP17RP31
Metal outer housings
H/MSH/RCAHR10AHR11HR12HR21HR22HR24HR25HS
JRJR*WRM-WRPRP6RP13RP17RP31SR30
Hirose Electric manufactures a multitude of different types and variations of circular connectors, both standard and custom. Connectors shown in this presentation are selected for their broadest applications.
Our connectors will mate only with corresponding HRS connectors!
Protective caps: Available for plugs and receptacles.
* Cable diameter depends on the number of contacts in a specified connector.
6/22/2004 28
HR30 Series
JACK
PLUG
PLUG
RECEPTACLE
ALIGNMENT MARK
POLARIZED INTERFACES
PUSH/LOCK-PULL/RELEASE
6/22/2004 29
Self-sealing bushingGasketGasket
Back-shellSpringInsulator
Receptacle PlugSelf-tightening cable clamp
Lock/release sleeve
IP67 protectionComplete protection against dust intrusion
Protection against water intrusion, as stated
1m of water for ½ hour.
6/22/2004 30
Competition: Lemo, Odu, Amphenol – main targets. Several small off-shore manufacturers - typically very narrow in application.
This connector may be used in FDA approved equipment.
Instrumentation, communication
Marine applications (radio, fish finders,
depth sonar)
Recreational equipment
•MEDICAL, hospital and laboratory equipment
•Laboratory and test equipment
Light industrial applications , research equipment
Portable terminals
Applications
6/22/2004 31
• This connector can replace most plastic types on the market.
• Contact HRS if application require :
Sterilization of the connectors
Connector is exposed to continuous UV radiation (sun).
• HRS can produce different colors.
• If color is currently produced = no minimum quantity.
• Special colors orders would need a minimum quantity.
HR30 -Application notes:
6/22/2004 32
Addition of a new connector series – LF07Type: Metal
Lock type: Bayonet, short turn
Number of positions: 6
Termination: Solder
Strain relief: Built-in
Current rating: 2A
Voltage rating: 30V AC, 42V DC
Storage temp.: -25°C ∼∼∼∼ 85°C
Applicable cable dia.: 5mm
Protection rating: IP67 (1 m of water for ½ hour)
Tooling: Holding fixtures
LF07WBR-6P Receptacle
Panel mount
LF07WBP-6SPlug
Locking collar
Composite clamp
Shell, metalSeal “O” ring
Locking collar
Insulator with contacts
Spring washer
Back housing
Sealing bushing
Strain relief bushing
6/22/2004 33
LF07 Series
•Servo motors•Magnetic sensors•Linear scales•Measuring instruments•Industrial test equipment•Exploration instrumentation•Medical and research •Laboratory equipment•Recreational and agricultural equipment
Applications:
6/22/2004 34
How do they compare? 12 position, solder termination
HR10 HR25 HR30
Lock type: Push-pullPush-pull Push-pull
No. of contacts: 12 12,16, 20
14 mm 12.5 mm 15.5.mm
12
Max cable size: 5 mm dia. 5 mm dia. 6.2-7 mm dia.
Main difference: Metal/ Rubber bootAll metal All plastic
Main features: High contact density, esthetically pleasing, very robust
Highest contact density for the size, water protection
Weather and corrosion resistant, IP rated, self sealing strain relief.
•More contacts in the same shell size = check current carrying capacity
•Changing to crimp termination = crimp tools required
More contacts
in smaller
size
6/22/2004 35
•Upcoming Hirose Ads
Hirose HR30 ad in the July, 2004 issue of “Connector Specifier”
6/22/2004 36
•Upcoming Hirose Ads
Hirose HR10A, HR30, and RM15 waterproof ad in the July, 2004 issue of “EEPN”
6/22/2004 37
1. HRS website (www.hirose-connectors.com)
• Product catalogue, sample request and part search, location of representatives and distributors, Authorized cable assemblers, HRS offices, latest product additions.