HOW TO OPERATE ELECTRIC SCREWDRIVERS This document is done by NINGBO TAI-LI A.E.T. CO. LTD. We will demonstrate HIMAX T series DC electric screwdrivers here 寧寧寧寧寧寧寧寧寧寧寧寧寧寧 NINGBO TAI-LI A.E.T. CO. LTD. TEL: (574)8736-8178 FAX: (574)8736- 8078 寧寧 : www.ehimax.com E-MAIL: [email protected]Professional Electric Screwdrivers Tools & Equipment for accurate assembly line Torque Meter Screw Counter Spring Separator
This document is posted to help you gain knowledge. Please leave a comment to let me know what you think about it! Share it to your friends and learn new things together.
Transcript
HOW TO OPERATEELECTRIC SCREWDRIVERSThis document is done by NINGBO TAI-LI A.E.T. CO. LTD.
We will demonstrate HIMAX T series DC electric screwdrivers here
Professional Electric Screwdrivers Tools & Equipment for accurate assembly line
Torque Meter
Screw Counter
Spring Separator
DC ELECTRIC SCREWDRIVERSWITH POWER SUPPLYDC electric screwdrivers need to be used with power supply, which apparently increases the stability and safety of the electric screwdrivers
HIMAX T series electric screwdrivers have to be used with power supply CLT-50(for all models) & CLT-50S(for T2, T3, T4 only)
CLT-50 & CLT-50S can also be used with other compatible electric screwdriver brands
DC TYPE ELECTRIC SCREWDRIVERDC electric screwdrivers need to be used with power supply, which apparently increases the stability and safety of the electric screwdrivers
HIMAX T series electric screwdrivers have to be used with power supply CLT-50(for all models) & CLT-50S(for T2, T3, T4 only)
CLT-50 & CLT-50S can also be used with other compatible electric screwdriver brands
AC TYPE ELECTRIC SCREWDRIVERSAC type electric screwdrivers can be directly plugged in and use without additional power pack. Convenient and easier to use.
However, compared with DC electric screwdrivers, AC electric screwdrivers are less stable and more likely to break down.
Bit Holder Collar: Push it to fit up/dismantle the bitSwitch Lever
Hanger
For/Rev Switch
The Categories of bits
OPERATING INSTRUCTION
Make sure the power is switched off to install or replace screwdriver bits; press the front-end iron cap will allow the screwdriver bits to be inserted or released.
It is recommended to suspend the electric screwdriver by a flexible balancer for easy operation and prevent its dropping.
Adjust the torque dial to the proper position according to the dial/torque table for each model.
The forward/reverse switch should be set to the forward position when fastening screws. Press the start switch to complete the operation. The automatic control model will shut off the power and stop the rotation of the screwdriver bit as soon as the set torque value is reached.
Position the forward/reverse switch to reverse to loosen screws.
Use hands to hold the electric screwdriver during operation. Keep it in a perpendicular position with the screw and apply pressure slightly to prevent slipping.
Use hands or other means to fix the object operated and operate the electrical power screwdriver safely.
Do not press the start key abruptly again after the completion of the fastening operation each time.
Do not switch the forward/reverse position and improper switch operations when the motor is running to prevent the short-circuit of the start switch.
Use it under the normal operation frequency ( 8 working hours per day and fasten 800-1000 screws per hour) without exceeding the operation load will extend the life time of the electric screwdriver and reduce the occurrences of malfunction.
Please do not use this type of electric screwdriver to fasten wooden screws.
REGULAR SIMPLE MAINTENANCE Check to see whether all the parts, shell, and power lines are intact all the time to
ensure normal operations.
Unplug the power plug and turn off the power before doing any maintenance operation to ensure safety.
For every 1000 hours operation or half year, the following cleaning and maintenance operations to the machine body and the inside are required:
HIMAX T2, T3 DC ELECTRIC SCREWDRIVERSHIMAX TL2000/3000Torque Controlled DC Type electric screwdriverPrecise Low torque type 0.2~2.5 Kgf-cm
>Precise torque gives full power>Stability>Accuracy>No noise
Main applicable productsCameras, timekeepers, mobiles, digital cameras, HDD, CD, laser reading heads, UPS navigators, small VTR, computers, TFT panels and NB notebook PC.
HIMAX TL4000/5000/6000Torque controlled DC Type electric screwdriver Middle torque type 1.0~12.0 Kgf-cm
>Superior quality sustaining 15,000,000 cycles of test>Stability>Accuracy>High efficiency
Main applicable productsDigital cameras, HDD, CD, laser reading heads, car-carried sound equipment, UPS navigators, small VTR, small computers, TFT panels, NB notebook PC, facsimile sets, photo printers, telescopic antenna, communication equipment, video recorders, video game machines and car lamps etc.
HIMAX TL-6500Torque controlled DC type electric screwdriversHigh torque type 2.0~20.0 Kgf-cm
>Best choice for high torque and high efficient operation>Stability>Durability>High efficiency
Main applicable productsCameras, mobiles, HDD, CD, laser reading heads, car-carried sound equipment, small VTR, UPS navigators, small computers, TFT panels, NB notebook PC, video game machines, facsimile sets, TV sets, photo printers, telescopic antenna, communication equipment, video recorders, car lamp and lighting fixtures etc. .