This document is posted to help you gain knowledge. Please leave a comment to let me know what you think about it! Share it to your friends and learn new things together.
Transcript
Submission folder
Customer Hotline Customer Hotline Hong Kong 8228 8118Macau (Toll free) 00800- 8228 8118
Hilti Screw SystemSample Submission and Approval Form 2General Information- Hilti designation system 3- Drilling capacity table 4- Product description 5 - 7Self-drilling Screw - S-MD 51 Z 4.8 x Length 8 - 9- S-MD 51 Z 6.3 x Length 10 - 11- S-MD 51 LZ 4.8 x Length 12 - 13- S-MD 53 Z 4.8 x Length 14 - 15- S-MD 53 Z 5.5 x Length 16 - 17- S-MD 53 Z 6.3 x Length 18 - 19- S-MD 55 Z 5.5 x Length 20 - 21- S-MD 01 / 03 Z 4.8 / 6.3 / 5.5 x Length 22 - 23- S-MD 21 / 23 / 25 Z 5.5 / 6.3 x Length 24 - 25- S-MD 01 / 03 / 05 Z 4.2 / 4.8 / 5.5 / 6.3 x Length 26 - 28- S-MD 51 S 4.8 / 5.5 x Length 29 - 30- S-MD 51 / 61 / 71 LS 5.5 x Length 31 - 32- S-MD 53 / 63 / 73 S 5.5 / 6.3 x Length 33 - 34- S-MD 43 S 5.5 x Length 35 - 36- S-MD 55 / 65 / 75 S 5.5 x Length 37 - 38- S-MD 01 / 03 / 05 S 5.5 x Length 39 - 41Sandwich screw- S-CD 63 / 73 S 5.5 x Length 42 - 43- S-CD 65 / 75 S 5.5 x Length 44 - 45- S-CDW 61 / 71 S 6.5 x Length 46 - 47Accessories 48German Approvals- Sample translation 49- Approvals 50 - 71Government Letter 72 - 73Country of Origin 74Job Reference 75 - 79
Page 1 OCT 2011
SAMPLE SUBMISSION AND APPROVAL FORM
Contract Title : Ref. No. : Date : Ref. No. of Previous Submission: Contract No. : (1) : File Reference
: (2) :
DETAILS OF SUBMISSION To : Contract Manager’s Representative (Attn: Mr. ) *(Name of Consultant Projects) From : (State Name of Contract) To enclosed sample boards and catalogue* / technical date* / test report* / job reference* as described below have been checked for compliance with the Specifications and Drawings, and are herewith submitted for approval. a) Materials Description : Hilti Self-drilling screw b) Model Name c) Specification Ref. Page : Item : d) Drawing Ref. No. e) B.Q. Ref. No. : f) Location (application) : g) Brand Name : Hilti h) Manufacturer : Sheh Fung Screws Co Ltd (OEM Partners) i) Source of Origin : Taiwan j) Supplier : Hilti (Hong Kong) Ltd. k) Catalogue : Attached l) Technical Data : Attached m) Test Report : Attached n) Job Reference : Attached o) Material Safety Data Sheet : N / A p) Anticipated date of
approval : A.S.A.P.
For and on behalf of the Contractor:
Quality Control Engineer
CONTRACT MANAGER’S COMMENTS To : (State Name of Contract) From : Contract Manager’s Representative (Mr. ) *(Name of Consultant for Consultant Projects) On the basis of the sample and information given, the above sample submitted is: 1)* Approved : 2)* Approved subject to : 3)* Not approved because : And resubmission is required. Remarks : Approval does not alter the requirements of the Contract unless specifically noted. Contract Manager’s Representative (Mr. )
Date: c.c. Project Clerk of Work – with sample PQS Contract File
(* Delete if inappropriate)
Page 2 OCT 2011
Screw fastening: Basic information 4
5
Hilti designation system
As a result of the structuring in groups and sub-groups, the screw characteristics can be identified more easily from the designation.
The user does not have to note the entire designation or item number.A screw is already clearly defined by the group designation and the dimension.
The following chart shows the drilling range per drill point number in relation to thescrew nominal diameter.
12.00
10.00
7.50
5.00
2.50
Dia.(mm)
3.50# 6
1.00
1.001.50
2.502.75
1)2.003.00
2)4.00
3.00
2.002.50
3.50
4.50
5.50
6.00
1.00 1.25 1.25 1.25 1.25 1.25 1.25
2.10 2.10 2.60 2.60
4.60
3.90# 7
4.20# 8
4.80# 10
5.50# 12
6.30# 14
3.50# 6
3.90# 7
4.20# 8
4.80# 10
5.50# 12
6.30# 14
5.50# 12
Stee
l thi
ckne
ss (m
m)
Point 1 Point 3 Point5
The drill point diameter is selected to ensure that a screw can be driven optimally andthe highest pull-out value obtained.
The thickness to be drilled through determines the drill point length, the cutting groove(flute) length and the thread diameter. The length of the drill point must always be selectedto ensure that the total thickness can be drilled through completely before thread tappingor forming begins.
The required drill point size for the given thickness and the stipulated screw diameterare given in the above table.
1) Self-drilling screw, case hardened: 2.75 mmSelf-drilling screw, stainless steel: 2.00 mm
2) Self-drilling screw, liner sheets, stainless steel: 4.00 mmSelf-drilling screw, case hardened: 3.00 mmSelf-drilling screw, stainless steel: 3.00 mm
W 2
832
cha
pter
4 0
8200
3
Page 4 OCT 2011
Page 5 OCT 2011
Page 6 OCT 2011
Page 7 OCT 2011
Page 8 OCT 2011
Page 9 OCT 2011
Page 10 OCT 2011
Page 11 OCT 2011
Page 12 OCT 2011
Page 13 OCT 2011
Page 14 OCT 2011
Page 15 OCT 2011
Page 16 OCT 2011
Page 17 OCT 2011
Page 18 OCT 2011
Page 19 OCT 2011
Page 20 OCT 2011
Page 21 OCT 2011
Page 22 OCT 2011
Page 23 OCT 2011
Page 24 OCT 2011
Page 25 OCT 2011
Page 26 OCT 2011
Page 27 OCT 2011
Page 28 OCT 2011
Page 29 OCT 2011
Page 30 OCT 2011
Page 31 OCT 2011
Page 32 OCT 2011
Page 33 OCT 2011
Page 34 OCT 2011
Page 35 OCT 2011
Page 36 OCT 2011
Page 37 OCT 2011
Page 38 OCT 2011
Page 39 OCT 2011
Page 40 OCT 2011
Page 41 OCT 2011
Page 42 OCT 2011
Page 43 OCT 2011
Page 44 OCT 2011
Page 45 OCT 2011
Page 46 OCT 2011
Page 47 OCT 2011
Page 48 OCT 2011
Approvals 8
5
W 2
832
cha
pter
8 0
8200
3
SAMPLE-TRANSLATION
Fastener type
Designation
Date of issue
Approval ID number
Approval numberFastener
Material
Screw
Washer
Maker
Distributor
Thickness (mm) COMPONENT II → basematerial
Type of load
Shear load kN
Tensile load kN
Load figures: SHEAR
Load figures: TENSILE
Application alternatives
Thic
knes
s (m
m) C
OMPO
NENT
→m
etal
she
et to
be
fast
ened
In case of intermediate thicknesses for component I or II the loadbearing datas have to be taken from the smaller thicknessesPage 49 OCT 2011