Hilti HIT-RE500 Injectable Mortar with Grade 500 Rebar 2 - 3 4 – 6 7 - 13 14 -15 16 – 17 18 - 22 23 – 36 37 - 45 46 - 68 69 - 70 71 73 - 80 81 - 87 Sample Submission and Approval Form Chemical Anchor System Summary & SAFEset Product Catalogue Technical data & Setting Details Detailed Consumption Table Method Statement for Installation Loading Test Report (BS5080: Part 1)* Fire Performance Assessment Report (WF 327804/B Issue 2)* Fire Performance Test Report (IBMB 3357/0550-5)* Government Letter Country of Origin Material Safety Data Sheet Job Reference *All the test reports in this submission folder are abstract version with essential data for submission purpose. For full report, please contact Hilti through our customer service hotline 8228 8118. Make your submission simple! To download the most updated submission folders and technical manuals, visit http://www.hilti.com.hk/downloads Recycling one ton of paper saves 17 trees and 7000 gallons of water. Please consider your environmental responsibility before using the hard copy version! 1 Nov 2017
87
Embed
Hilti HIT-RE500 Injectable Mortar with Grade 500 Rebar
This document is posted to help you gain knowledge. Please leave a comment to let me know what you think about it! Share it to your friends and learn new things together.
Transcript
Hilti HIT-RE500 Injectable Mortar
with Grade 500 Rebar
2 - 3
4 – 6
7 - 13
14 -15
16 – 17
18 - 22
23 – 36
37 - 45
46 - 68
69 - 70
71
73 - 80
81 - 87
Sample Submission and Approval Form
Chemical Anchor System Summary & SAFEset
Product Catalogue
Technical data & Setting Details
Detailed Consumption Table
Method Statement for Installation
Loading Test Report (BS5080: Part 1)*
Fire Performance Assessment Report (WF 327804/B Issue 2)*
Fire Performance Test Report (IBMB 3357/0550-5)*
Government Letter
Country of Origin
Material Safety Data Sheet
Job Reference
*All the test reports in this submission folder are abstract version with essential data for submission purpose.
For full report, please contact Hilti through our customer service hotline 8228 8118.
Make your submission simple!
To download the most updated submission folders and technical
manuals, visit http://www.hilti.com.hk/downloads
Recycling one ton of paper saves 17 trees and 7000 gallons of water.
Please consider your environmental responsibility before using the hard copy version!
To: Contract Manager’s Representative Attention: ________________________
From: ________________________________
The enclosed sample and catalogue* / certificate of origin* / technical data* / test report* / job reference* as described below have been checked for compliance with the Specifications and Drawings, and are submitted for approval.
1. General Informationa. Material Description HIT – RE500 Injection Adhesive
d. Drawing Ref. No. __________________________________________________________ __________________________________________________________ __________________________________________________________
e. B.Q. Ref.No.: __________________________________________________________ __________________________________________________________ __________________________________________________________
f. Anticipated date of approval: __________________________________________________________
2. Technical InformationThe submitted sample has been checked against the specification and drawings as listed below:-
Specification Requirements Submitted Sample (State details against each item)
a. BrandNot specified Hilti
b. Country of OriginNot specified Germany
c. Manufacturer’s Name & AddressNot specified Hilti Corporation, FL-9494 Principality of Liechtenstein.
d. Factory’s Name & Address(es)Not specified Hilti Gmbh Ind. Ges. F. Befestigungstechnik
Hiltistrasse 6, D-86916 Kaufering, Germany. e. Supplier (with Applicator, if any)
Not specified Hilti (Hong Kong) Ltd
2 Nov 2017
Page 2 of 2
f. Appearance Not specified According to the sample submitted g. Color + Not specified Red h. Specification Not specified Attached i. Manufacturer’s Catalogue Not specified Attached j. Test Report (Original/Certificated True Copy) Not specified Attached k. Previous Job Reference Not specified Attached l. Supplementary Information Not specified NIL For and on behalf of the Contractor ____________________________
(Quality Control Manager)
CONTRACT MANAGER’S COMMENTS To: From: Contract Manager’s Representative: ________________________________
On the basis of the sample and information given, the above sample submitted is:
(1) * Approved. (2) * Not approved because ____________________________________________________ _______________________________________________________________________ _______________________________________________________________________ Remarks: _______________________________________________________________________ _______________________________________________________________________ _______________________________________________________________________ Approval does not alter the requirements of the Contract Contract Manager’s Representative: ____________________________
_____________________________ Date:
cc. _______________________________________ _______________________________________ _______________________________________ _______________________________________ (* Delete if appropriate) (+ For glass or vitreous mosaic tiles, the contractor is required to confirm the colour range(s) of the submitted sample, i.e. a) light and or medium; or b) dark)
HIT-RE 500/330/1 INT 1x Foil pack, 1x Mixer, 1x Mixer extension 1 pc 426675
HIT-RE 500/500/1 INT 1x Foil pack, 1x Mixer, 1x Mixer extension 1 pc 426672
Injectable mortar Hilti HIT-RE 500
Applications■ Structural connections with post-installed rebar (e.g. extension/
connection to walls, slabs, stairs, columns, foundations, etc.)■ Substitution of misplaced/missing rebars or couplers■ Anchoring structural steel connections (e.g. steel columns,
beams, etc.)■ Anchoring crash barriers, noise barriers, etc.■ Structural renovation of buildings, bridges and other civil struc-
tures, retrofitting and re-strengthening of concrete members possible
■ Suitable for underwater applications in hammer-drilled holes
Advantages■ High performance and technical superiority as per international
approvals■ Especially suitable for large-diameter elements and/or deep
embedment depths■ No expansion forces in concrete allow secure fastenings even
close to edges and/or with close spacing■ Virtually odourless hence convenient to work with■ Suitable for anchoring in diamond cored holes ■ Unique foil packaging and compatible Hilti HIT injection system
makes handling extremely easy
Base materials ◾ Concrete (uncracked)
Technical dataSAFEset No
Material composition Epoxy adhesive
Tested/approved for diamond drilling Yes
Seismic No
In-service temperature – range -40 - 70 °C
Additional product information Always wear eye protection and gloves while handling
These are abbreviated instructions which may vary according to the application. Always observe/follow the instructions accompanying the product or refer to www.hilti.com/techlib.
ApprovalsETA (ETAG 001-05, Option 7)
ETA-08/0105 for HIT-RE 500 rebar (ETAG 001-5, Option 1)
Approvals and test reports may apply to selected products only. Please refer to the documents for details.
7 Nov 2017
183
Anchor Systems
Hilti online: www.hilti.com.hk
Ordering designation WeightSales pack quantity
Item number
HDE 500 CB DISPENSER KIT 1 pc 34990781)
HDE 500-A22 box 2.2 kg 1 pc 2005630
HDE 500-A22 CR/CB cas 2.2 kg 1 pc 2005637
HDE 500-A22 empty 2.4 kg 1 pc 4347241) This is a non-stock item. For detailed lead time information please contact your Hilti representative.
Dispenser HDE 500-A22
Applications■ Injection of Hilti HIT adhesive mortar for fastening anchor rods
and rebars in concrete and masonry ■ No need for external power source supply■ Serial fastenings and/or injection in deep holes
Advantages■ Dose adjustment knob for accurate and controlled dispensing■ Fast, easy foil pack loading■ High battery capacity (up to 100x500ml foil packs)
Technical dataDispenser, setting tool, accessory, tester type
Dispensers
Ordering designation WeightSales pack quantity
Item number
HDM 330 CB DISPENSER KIT 1 pc 34990821)
HDM 330 CB CARDBOARD BOX 1 pc 34991031)
HDM 500 CB DISPENSER KIT (2060870 W/ACC) 1 pc 3499081
HDM 330 cas 1 pc 2060429
HDM 500 cas 1 pc 2060870
HDM 330 box 1.5 kg 1 pc 2005640
HDM 500 box 1.8 kg 1 pc 20056411) This is a non-stock item. For detailed lead time information please contact your Hilti representative.
Dispenser HDM
Applications■ Injection of Hilti HIT adhesive mortar for fastening anchor rods
and rebars in concrete and masonry
Advantages■ Fast, easy foil pack loading
Technical dataDispenser, setting tool, accessory, tester type
Dispensers, n/a
8 Nov 2017
104
Drilling and Demolition
4
Ordering designation Diameter Working length LengthSales pack quantity
Item number
TE-YD 16/59 16 mm 400 mm 590 mm 1 pc 2018956
TE-YD 18/59 18 mm 400 mm 590 mm 1 pc 2018957
TE-YD 20/59 20 mm 400 mm 590 mm 1 pc 2018959
TE-YD 22/59 22 mm 400 mm 590 mm 1 pc 2018960
TE-YD 25/59 25 mm 400 mm 590 mm 1 pc 2018962
TE-YD 28/59 28 mm 400 mm 590 mm 1 pc 2018964
TE-YD 32/59 32 mm 400 mm 590 mm 1 pc 2018966
Hammer drill bit TE-YD
Applications■ Drilling holes for anchoring structural steel connections (e.g.
steel columns, beams)
Advantages■ Drilling and hole cleaning in one step
Customer Hotline: Hong Kong 8228 8118 Macau 00800 8228 8118
Ordering designation Diameter Working length LengthSales pack quantity
Item number
TE-CD 12/33 12 mm 200 mm 330 mm 1 pc 2018940
TE-CD 14/37 14 mm 240 mm 360 mm 1 pc 2018942
TE-CD 16/37 16 mm 240 mm 360 mm 1 pc 2018945
TE-CD 18/37 18 mm 240 mm 360 mm 1 pc 2018946
Hammer drill bit TE-CD
Applications■ Drilling holes for structural connections with post-installed
rebars
Advantages■ Drilling and hole cleaning in one step
9 Nov 2017
TSANTER
Typewritten Text
TSANTER
Typewritten Text
TSANTER
Typewritten Text
TSANTER
Typewritten Text
TSANTER
Typewritten Text
TSANTER
Typewritten Text
TSANTER
Typewritten Text
TSANTER
Typewritten Text
TSANTER
Typewritten Text
243
Anchor Systems
Hilti online: www.hilti.com.hk
Ordering designationSales pack quantity
Item number
Blow-out pump 1 pc 60579
Extension tube HIT-VL 16/0.7 10 pc 336646
Accessories for blowing out drilled holes Hilti HIT
Applications■ For fast and efficient removal of dust and debris from drilled
holes of varying diameters and depths to allow correct installa-tion of anchors and rebar
Technical dataDispenser, setting tool, accessory, tester type
VC 40-U 110V 1x Univ. vacuum cleaner VC 40-U 110 V 1 pc 2183451)
VC 40-U 230V 1x Univ. vacuum cleaner VC 40-U 230 V 1 pc 2123001) This is a non-stock item. For detailed lead time information please contact your Hilti representative.
Universal vacuum cleaner VC 40-UM
Technical dataContainer capacity 36 l
Dust capacity 40 kg
Water capacity 25 l
A-weighted emission sound pressure level acc. to EN 60745
71 dB (A)
Hose diameter 36 mm
Hose length 5000 mm
Weight according to EPTA Procedure 01/2003
14.7 kg
Dimensions (LxWxH) 505 x 380 x 610 mm
Applications■ Removing dust from drilling, slitting, grinding, cutting and dry
coring■ Removing slurry from wet coring and cleaning
Advantages■ Hilti AirBoost filter technology for consistently high suction
performance■ Very good handling thanks to compact design■ Full exploitation of tank capacity due to placement of filter and
hose connection in the upper part of the machine■ Robust housing to withstand the harshest jobsite conditions■ New tank concept for easy and virtually dust-free dust removal■ Maximum total load of dust: up to 40 kg
12 Nov 2017
1Cu
stom
er H
otlin
e: H
ong
Kong
822
8 81
18
Mac
au 0
0800
8228
811
8 (
Mon
- F
ri 8
:30
am -
6:0
0 pm
/ S
at 8
:30
am -
1:0
0 pm
) |
Fa
st O
rder
ing,
Pro
mpt
& F
ree
Del
iver
yCu
stom
er H
otlin
e: H
ong
Kong
822
8 81
18
Mac
au 0
0800
8228
811
8 (
Mon
- F
ri 8
:30
am -
6:0
0 pm
/ S
at 8
:30
am -
1:0
0 pm
) |
Fa
st O
rder
ing,
Pro
mpt
& F
ree
Del
iver
y2
HIT
-RE
50
0In
jec
tio
nA
dh
esiv
e
Th
e B
est
Ch
em
ica
l A
nc
ho
rfo
r re
bar
faste
nin
g u
nd
er
diff
ere
nt
co
nd
itio
ns
Hig
h P
erf
orm
an
ce
& S
afe
ty
Vs o
the
r in
jec
tio
n a
dh
esiv
e
40%
hig
her
tens
ile lo
ad in
nor
mal
hol
e.
30%
hig
her
tens
ile lo
ad in
wet
and
wat
er-f
illed
hol
e.
Sui
tab
le fo
r b
oth
dril
led
or
dia
mon
d c
ored
hol
e.
✓ ✓ ✓
Sa
ve
Ma
teri
al &
La
bo
ur
Co
st
Vs
ha
rd c
art
rid
ge
in
jec
tio
n a
dh
esiv
e
70%
less
was
tage
com
par
ed t
o ha
rdca
rtrid
ge.
Red
uce
dis
pos
al c
ost.
Sho
rt d
isp
ensi
ng t
ime.
✓ ✓ ✓
Wid
ely
Ap
pro
ve
dfo
r re
ba
r fa
ste
nin
g
The
only
inje
ctio
n ad
hesi
ve li
sted
in “
Fire
pro
tect
ion
mat
eria
ls fo
r st
ruct
ural
use
of C
entr
al D
ata
Ban
k”.
4-ho
ur fi
re r
esis
tanc
e W
arrin
gton
tes
t re
por
t.
Eas
y an
d s
imp
le lo
adin
g se
lect
ion
tab
le.
✓ ✓ ✓ Co
nve
nie
nt
& F
lex
ible
Vs o
the
r in
jec
tio
n a
dh
esiv
e
Car
trid
ge c
an b
e us
ed fr
om 5
˚C t
o 40
˚C.
Long
wor
king
tim
e (2
0min
s) a
t 30
˚C.
Onl
y d
isp
ensi
ng fo
rce
req
uire
d, c
omp
ared
to
hard
cart
ridge
.
✓ ✓ ✓
� � � � � �
WE
AK
ER
bon
d s
tren
gth
70%
MO
RE
was
tage
com
par
ed t
o fo
il p
ack
LIM
ITE
Dte
mp
erat
ure
rang
e (2
0˚C
to
32˚C
) for
cart
ridge
dis
pen
sing
INS
UFF
ICIE
NT
wor
king
tim
e (8
.5m
ins)
at
30˚C
HIG
HE
Rd
isp
ensi
ng fo
rce
LAC
Kof
ref
eren
ce /
ap
pro
val
1 3
Oth
er
Inje
cti
on
Ad
he
siv
e
13 Nov 2017
HIT-RE 500 Injection Adhesive with Rebar (Grade 500B)
HIT RE 500 foil pack, mixer
Cartridge Holder, HIT-CB 500
Basic Setting Detail, Loading Data & Testing Load
Y10 Y12 Y16 Y20 Y25 Y32 Y40
Rebar diameter (mm) [Ød] 10 12 16 20 25 32 40
Hole diameter (mm) [d0] 12 16 20 25 32 40 50.8
Min. Embedment Depth (mm) [h1]
100 120 160 200 250 320 400
Ultimate mean pull-out load as per BS5080 Part 1 (kN) Test Report *See Remark 3
Installation system (Hammer Drill / Diamond Coring)
Hollow Drill bit TE-CD12 TE-CD16 TE-YD20 TE-YD25 TE-YD32 n/a n/a
Drill bit TE-CX12 TE-CX16 TE-CX20 TE-CX25 TE-YX32 TE-YX40 TE-Y 2”-23”
Drilling system TE2 / TE7 / TE30 / TE40 TE 50 / TE60 / TE70
Core bit DD-C12 DD-C16 DD-C20 DD-C25 DD-B30 DD-B40 DD-B 52
Diamond core system DD-EC1 DD 120 / DD 160
Remarks: 1. It is based on non-cracked concrete with strength 30N/mm
2;
2. Yield strength of rebar fyk is 500N/mm2;
3. There is no factor of safety introduced in the ultimate mean pull out load. Please applyappropriate factor of safety in your design;
4. Onsite pullout test can be carried out to verify the workmanship of the installation but shouldnot be verification of the ultimate loading. The testing load shall be subjected to the designer’sdecision but should not exceed the 0.87 x yield load to avoid permanent damage to the rebar.
5. All the spacing and edge distance requirement for reinforced concrete design should be reference toBS8110;
6. If there is a fire resistance concern, the loading should be referred to the fire table
Features: Base material: concrete
Injection system with high loading capacity
Good performance in diamond drilled holes and wet holes
Suitable for water saturated concrete
Large diameter applications
Long working time at elevated temperatures
Odorless epoxy resin
No expansion force in base material
Small edge distance and anchor spacing
Clean and simple application
SAFEset system with hollow drill bit TE-CD & TE-YD
Material:
Rebar: Steel grade fyk:500 Nmm2
Cartridge: Foil pack: 500ml
Foil pack: 330ml (special request)
Dispenser: HDE 500-A22 and HDM 500 Cartridge Holder, HIT-CB 500
14 Nov 2017
tsanter
Typewritten Text
Technical Information
Setting Details
�
HIT RE500 with Rebar
Consumption Table for Quick Reference
Rebar Size φ
Hole Diameter D [ mm]
Hole Depth l [ mm ]
Filled Volume V [ ml ]
Y10 12 100 3.5
Y12 16 120 10.6
Y16 20 160 18.1
Y20 25 200 35.3
Y25 32 250 78.3
Y32 40 320 144.7
Y40 50.8 (2”) 400 307.9
Remark: 1) Please refer to ‘Detailed consumption table’ for more information2) The filled volume was calculated by the following equation and is for reference only.
Filled volume = [(D/2)2- (R/2)
2] x 3.14 x I
where D = hole diameter, I = hole depth, R = rebar diameter2) The filled volume showed in the table did not include any wastage during the installation.3) 1 trigger pull of dispenser HDM is approx. 6 ml of RE 500.
To dispense 1 cartridge of 500ml RE 500 needs approx. 80 triggers.
Mechanical Properties
15 Nov 2017
tsanter
Typewritten Text
Technical Information
16 Nov 2017
tsanter
Typewritten Text
Detailed Consumption Table
tsanter
Typewritten Text
*Please note that above consumption table is based on good workmanship and for reference only
tsanter
Typewritten Text
tsanter
Typewritten Text
17 Nov 2017
tsanter
Typewritten Text
tsanter
Typewritten Text
Detailed Consumption Table
tsanter
Typewritten Text
tsanter
Typewritten Text
tsanter
Typewritten Text
tsanter
Typewritten Text
*Please note that above consumption table is based on good workmanship and for reference only
Method statement of RE500 installation
18 Nov 2017
Method statement of RE500 installation
19 Nov 2017
Method statement of RE500 installation
20 Nov 2017
Method statement of RE500 installation
21 Nov 2017
Method statement of RE500 installation
22 Nov 2017
23 Nov 2017
24 Nov 2017
25 Nov 2017
26 Nov 2017
27 Nov 2017
28 Nov 2017
29 Nov 2017
30 Nov 2017
31 Nov 2017
32 Nov 2017
33 Nov 2017
34 Nov 2017
35 Nov 2017
36 Nov 2017
37 Nov 2017
38 Nov 2017
39 Nov 2017
40 Nov 2017
41 Nov 2017
42 Nov 2017
43 Nov 2017
44 Nov 2017
45 Nov 2017
46 Nov 2017
47 Nov 2017
48 Nov 2017
49 Nov 2017
50 Nov 2017
51 Nov 2017
52 Nov 2017
53 Nov 2017
54 Nov 2017
55 Nov 2017
56 Nov 2017
57 Nov 2017
58 Nov 2017
59 Nov 2017
60 Nov 2017
61 Nov 2017
62 Nov 2017
63 Nov 2017
64 Nov 2017
65 Nov 2017
66 Nov 2017
67 Nov 2017
68 Nov 2017
69 Nov 2017
70 Nov 2017
tsanter
Typewritten Text
71 Nov 2017
Page 1/9
Safety data sheetaccording to 1907/2006/EC, Article 31
Printing date 01.10.2014 Revision: 01.10.2014Version number 8
39.1.0
SECTION 1: Identification of the substance/mixture and of the company/undertaking
· 1.1 Product identifier
· Trade name: Hilti HIT-RE 500
· Container size 330 ml, 500 ml, 1400 ml· 1.2 Relevant identified uses of the substance or mixture and uses advised against· Sector of Use Building and construction work· Application of the substance / the mixture Adhesive mortar for rebar and anchor fastenings in solid concrete
· 1.3 Details of the supplier of the safety data sheet· Manufacturer/Supplier:Hilti (Gt. Britain) Ltd.1 Trafford Wharf RoadTrafford ParkGB-M17 1BY ManchesterPhone: 0800 886 100 (Freephone)Fax: 0800 886 200 (Freefax)Email: [email protected]
· 2.1 Classification of the substance or mixture· Classification according to Regulation (EC) No 1272/2008
Skin Corr. 1A H314 Causes severe skin burns and eye damage.
Aquatic Chronic 2 H411 Toxic to aquatic life with long lasting effects.
Skin Sens. 1 H317 May cause an allergic skin reaction.
· Classification according to Directive 67/548/EEC or Directive 1999/45/ECC; Corrosive
R35: Causes severe burns.
Xn; Harmful
R20/22: Harmful by inhalation and if swallowed.
Xi; Irritant
R41: Risk of serious damage to eyes.
Xi; Sensitising
R43: May cause sensitisation by skin contact.
N; Dangerous for the environment
R51/53: Toxic to aquatic organisms, may cause long-term adverse effects in the aquatic environment.· Information concerning particular hazards for human and environment:The product has to be labelled due to the calculation procedure of the "General Classification guideline for preparationsof the EU" in the latest valid version.
· Classification system:The classification is in line with current EC lists. It is expanded, however, by information from technical literature andby information furnished by supplier companies.
· 2.2 Label elements· Labelling according to Regulation (EC) No 1272/2008The product is classified and labelled according to the CLP regulation.
(Contd. on page 2)
GB EN
72 Nov 2017
Page 2/9
Safety data sheetaccording to 1907/2006/EC, Article 31
Printing date 01.10.2014 Revision: 01.10.2014Version number 8
· Hazard statementsH314 Causes severe skin burns and eye damage.H317 May cause an allergic skin reaction.H411 Toxic to aquatic life with long lasting effects.
· Precautionary statementsP260 Do not breathe vapours.P280 Wear protective gloves/protective clothing/eye protection/face protection.P303+P361+P353 IF ON SKIN (or hair): Remove/Take off immediately all contaminated clothing. Rinse skin with
water/shower.P305+P351+P338 IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses, if present and
easy to do. Continue rinsing.P333+P313 If skin irritation or rash occurs: Get medical advice/attention.P337+P313 If eye irritation persists: Get medical advice/attention.
· Additional information:Contains epoxy constituents. May produce an allergic reaction.
· 2.3 Other hazards· Results of PBT and vPvB assessment· PBT: Not applicable.· vPvB: Not applicable.
· Additional information:
Hilti HIT
· Information pertaining to particular dangers for man and environment: AH315 Causes skin irritation.H319 Causes serious eye irritation.H317 May cause an allergic skin reaction.H411 Toxic to aquatic life with long lasting effects.
· Information pertaining to particular dangers for man and environment: BH314 Causes severe skin burns and eye damage.H317 May cause an allergic skin reaction.H412 Harmful to aquatic life with long lasting effects.
* SECTION 3: Composition/information on ingredients
. · SVHC None· Additional information For the wording of the listed risk phrases refer to section 16.
SECTION 4: First aid measures
· 4.1 Description of first aid measures· General information Instantly remove any clothing soiled by the product.· After inhalationTake affected persons into the open air and position comfortablySeek medical treatment in case of complaints.
· After skin contact Instantly wash with water and soap and rinse thoroughly. If skin irritation persist, call a physician.· After eye contactSeek immediate medical advice.Rinse thoroughly with plenty of water for at least 15 minutes and consult a physician.Protect unharmed eye.Seek medical treatment.
· After swallowingDo not induce vomiting; immediately call for medical help.Rinse out mouth and then drink plenty of water.
· 4.2 Most important symptoms and effects, both acute and delayed Allergic reactions· 4.3 Indication of any immediate medical attention and special treatment neededNo further relevant information available.
SECTION 5: Firefighting measures
· 5.1 Extinguishing media· Suitable extinguishing agents Water spray, carbon dioxide (CO2), carbon dioxide blanket, foam, or dry powder.· For safety reasons unsuitable extinguishing agents Water with full jet.· 5.2 Special hazards arising from the substance or mixtureCan be released in case of fireNitrogen oxides (NOx)Carbon monoxide (CO)Under certain fire conditions, traces of other toxic gases cannot be excluded.
(Contd. on page 4)
GB EN
74 Nov 2017
Page 4/9
Safety data sheetaccording to 1907/2006/EC, Article 31
Printing date 01.10.2014 Revision: 01.10.2014Version number 8
Trade name: Hilti HIT-RE 500
(Contd. of page 3)
39.1.0
· 5.3 Advice for firefighters· Protective equipment: In the event of fire, wear self contained breathing apparatus
SECTION 6: Accidental release measures
· 6.1 Personal precautions, protective equipment and emergency proceduresWear protective equipment. Keep unprotected persons away.Wear protective clothing.Use personal protective equipment. Ensure adequate ventilation. Remove all sources of ignition.
· 6.2 Environmental precautions:Do not allow product to reach sewage system or water bodies.Do not allow to enter the ground/soil.
· 6.3 Methods and material for containment and cleaning up:Collect mechanically.Clean the accident area carefully; suitable cleaners are:organic solventDispose of contaminated material as waste according to item 13.
· 6.4 Reference to other sectionsSee Section 7 for information on safe handlingSee Section 8 for information on personal protection equipment.See Section 13 for information on disposal.
SECTION 7: Handling and storage
· 7.1 Precautions for safe handlingThe usual precautionary measures should be adhered to general rules for handling chemicals.Take note of emission threshold.Use only in well ventilated areas.Check the expiry date: see imprint on manifold (month/year). Do not use expired mortar!
· Information about protection against explosions and fires: Keep ignition sources away - Do not smoke.
· 7.2 Conditions for safe storage, including any incompatibilities· Storage· Requirements to be met by storerooms and containers: Keep in a cool, dry and dark place; 5 °C to 25 °C.· Information about storage in one common storage facility: Store away from foodstuffs.· Further information about storage conditions: Protect from heat and direct sunlight.
· Storage class As per VCI (1991) storage classification concept.· 7.3 Specific end use(s) Adhesive mortar for rebar and anchor fastenings in solid concrete
SECTION 8: Exposure controls/personal protection
· 8.1 Control parameters· Components with limit values that require monitoring at the workplace:The product has a pasty consistency. Exposure limit values for respirable dusts ar not relevant for this product.
1477-55-0 m-Xylylenediamine (30-40%)
MAK 0.1 mg/m³ (NL)
· Additional information: The lists that were valid during the compilation were used as basis.
· 8.2 Exposure controls· Personal protective equipment· General protective and hygienic measuresThe usual precautionary measures should be adhered to general rules for handling chemicals.Take off immediately all contaminated clothingWash hands during breaks and at the end of the work.Store protective clothing separately.Avoid contact with the eyes and skin.Do not eat, drink or smoke while working.Use skin protection cream for preventive skin protection.Clean skin thoroughly immediately after handling the product.Ensure that washing facilities are available in the work place.Do not carry cleaning cloths impregnated with the product in trouser pockets.Keep away from foodstuffs, beverages and food.
(Contd. on page 5)
GB EN
75 Nov 2017
Page 5/9
Safety data sheetaccording to 1907/2006/EC, Article 31
Printing date 01.10.2014 Revision: 01.10.2014Version number 8
Trade name: Hilti HIT-RE 500
(Contd. of page 4)
39.1.0
· Breathing equipment:Not necessary if room is well-ventilated.In case of brief exposure or low pollution use breathing filter apparatus. In case of intensive or longer exposure usebreathing apparatus that is independent of circulating air.
· Recommended filter device for short term use: Filter AX· Protection of hands:
Protective gloves
Only use chemical-protective gloves with CE-labelling of category III.EN 374Avoid direct contact with the chemical/ the product/ the preparation by organizational measures.The glove material has to be impermeable and resistant to the product/ the substance/ the preparation.
· Material of glovesNitrile rubber, NBRRecommended thickness of the material: ≥ 0.4 mmThe selection of the suitable gloves does not only depend on the material, but also on further marks of quality and variesfrom manufacturer to manufacturer. As the product is a preparation of several substances, the resistance of the glovematerial can not be calculated in advance and has therefore to be checked prior to the application.
· Penetration time of glove materialThe exact break trough time has to be found out by the manufacturer of the protective gloves and has to be observed.
· As protection from splashes gloves made of the following materials are suitable: Nitrile rubber, NBR· Not suitable are gloves made of the following materials:Natural rubber, NRLeather glovesStrong gloves
· Eye protection:
Tightly sealed safety glasses.
Gauze gogglesFace protectionEN 166 / EN 170
· Body protection:
Protective work clothing.
SECTION 9: Physical and chemical properties
· 9.1 Information on basic physical and chemical properties· General Information· Appearance:
Form: pasty
Colour: Component A: greyComponent B: redMixture: red
· Odour: Amine-like· Odour threshold: Not determined
· Change in conditionMelting point/Melting range: Not determined
Boiling point/Boiling range: > 200 °C
(Contd. on page 6)
GB EN
76 Nov 2017
Page 6/9
Safety data sheetaccording to 1907/2006/EC, Article 31
Printing date 01.10.2014 Revision: 01.10.2014Version number 8
Trade name: Hilti HIT-RE 500
(Contd. of page 5)
39.1.0
· Flash point: > 100 °C (DIN EN ISO 1523)
· Inflammability (solid, gaseous) Not determined
· Ignition temperature: Not determined
· Decomposition temperature: Not determined
· Self-inflammability: Product is not selfigniting.
· Danger of explosion: Product is not explosive.
· Critical values for explosion:Lower: Not determined
Upper: Not determined
· Vapour pressure at 20 °C: 0.04 hPa
· Density Component A: 1.5 g/cm³ (DIN 51757)Component B: 1.4 g/cm³ (DIN 51757)
· Relative density Not determined· Vapour density Not determined· Evaporation rate Not determined
· Solubility in / Miscibility with
Water: Unsoluble
· Partition coefficient (n-octanol/water): Not determined
· Viscosity:dynamic at 20 °C: 50 Pas (DIN 53019)
kinematic at 20 °C: >20 s (ISO 2431)
· Solvent content:Organic solvents: 0 %
Water: 0 %· 9.2 Other information No further relevant information available.
SECTION 10: Stability and reactivity
· 10.1 Reactivity· 10.2 Chemical stability· Thermal decomposition / conditions to be avoided: No decomposition if used according to specifications.· 10.3 Possibility of hazardous reactions No dangerous reactions known· 10.4 Conditions to avoid No further relevant information available.· 10.5 Incompatible materials: No further relevant information available.· 10.6 Hazardous decomposition products: No dangerous decomposition products known
SECTION 11: Toxicological information
· 11.1 Information on toxicological effects· Acute toxicity:
· LD/LC50 values that are relevant for classification:
1477-55-0 m-Xylylenediamine
Oral LD50 1040 mg/kg (rat)
Dermal LD50 2000 mg/kg (rabbit)
Inhalative LC50/4h 2.4 mg/l (rat)
· Primary irritant effect:· on the skin: Strong caustic effect on skin and mucous membranes.· on the eye:Strong caustic effect.Strong irritant with the danger of severe eye injury.
· Sensitization: Sensitization possible by skin contact.· Additional toxicological information:The product shows the following dangers according to the calculation method of the General EC ClassificationGuidelines for Preparations as issued in the latest version:Harmful
(Contd. on page 7)
GB EN
77 Nov 2017
Page 7/9
Safety data sheetaccording to 1907/2006/EC, Article 31
Printing date 01.10.2014 Revision: 01.10.2014Version number 8
Trade name: Hilti HIT-RE 500
(Contd. of page 6)
39.1.0
CorrosiveIrritantSwallowing will lead to a strong caustic effect on mouth and throat and to the danger of perforation of esophagus andstomach.
· CMR effects (carcinogenity, mutagenicity and toxicity for reproduction) None
· 12.2 Persistence and degradability No further relevant information available.· 12.3 Bioaccumulative potential No further relevant information available.· 12.4 Mobility in soil No further relevant information available.· Ecotoxical effects:· Remark: Toxic for fish· Additional ecological information:· According to recipe contains the following heavy metals and compounds according to EC guideline NO. 76/464
EC:None
· General notes:Avoid transfer into the environment.The product contains materials that are harmful to the environment.Also poisonous for fish and plankton in water bodies.Toxic for aquatic organismsWater hazard class 2 (German Regulation) (Self-assessment): hazardous for water.
· 12.5 Results of PBT and vPvB assessment· PBT: Not applicable.· vPvB: Not applicable.· 12.6 Other adverse effects No further relevant information available.
SECTION 13: Disposal considerations
· 13.1 Waste treatment methods· RecommendationMust not be disposed of together with household garbage. Do not allow product to reach sewage system.Hand over to disposers of hazardous waste.Full or only partially emptied cartridges must be disposed of as special waste in accordance with official regulations.
· European waste catalogue
08 04 09* waste adhesives and sealants containing organic solvents or other dangerous substances
Safety data sheetaccording to 1907/2006/EC, Article 31
Printing date 01.10.2014 Revision: 01.10.2014Version number 8
Trade name: Hilti HIT-RE 500
(Contd. of page 7)
39.1.0
· Uncleaned packagings:· Recommendation:Disposal must be made according to official regulations.Dispose of packaging according to regulations on the disposal of packagings.Empty packs: May be disposed via the local Green Dot collecting system (valpak) or EAK waste material code 150102(plastic packaging materials)
· UN "Model Regulation": UN3259 AMINES, SOLID, CORROSIVE, N.O.S (m-Xylylenediamine), 8, II
· HS-Code: 3214 10 10: Glaziers' putty, grafting putty, resin cements, caulkingcompounds and other mastics
SECTION 15: Regulatory information
· 15.1 Safety, health and environmental regulations/legislation specific for the substance or mixture
· National regulationsCouncil Directive 89/391/EEC of 12 June 1989 on the introduction of measures to encourage improvements in the safetyand health of workers at work. Article 12 Training of workersThe product is subject to classification in accordance with the prevailing version of the regulations on hazardousmaterials.
· Information about limitation of use: Employment restrictions concerning young persons must be observed.
· Other regulations, limitations and prohibitive regulations· Substances of very high concern (SVHC) according to REACH, Article 57 None· 15.2 Chemical safety assessment: not required.
GB EN
(Contd. on page 9)
79 Nov 2017
Page 9/9
Safety data sheetaccording to 1907/2006/EC, Article 31
Printing date 01.10.2014 Revision: 01.10.2014Version number 8
Trade name: Hilti HIT-RE 500
(Contd. of page 8)
39.1.0
* SECTION 16: Other information
These data are based on our present knowledge. However, they shall not constitute a guarantee for any specific productfeatures and shall not establish a legally valid contractual relationship.
· Relevant phrasesH302 Harmful if swallowed.H314 Causes severe skin burns and eye damage.H315 Causes skin irritation.H317 May cause an allergic skin reaction.H319 Causes serious eye irritation.H332 Harmful if inhaled.H411 Toxic to aquatic life with long lasting effects.H412 Harmful to aquatic life with long lasting effects.- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -R20/22 Harmful by inhalation and if swallowed.R35 Causes severe burns.R36/38 Irritating to eyes and skin.R43 May cause sensitisation by skin contact.R51/53 Toxic to aquatic organisms, may cause long-term adverse effects in the aquatic environment.R52/53 Harmful to aquatic organisms, may cause long-term adverse effects in the aquatic environment.
· Department issuing data specification sheet:Hilti Entwicklungsgesellschaft mbHHiltistrasse 6D-86916 KauferingTel.: +49 8191 906310Fax: +49 8191 90176310e-mail: [email protected]
· Contact: Mechthild Krauter· Abbreviations and acronyms:
ADR: Accord européen sur le transport des marchandises dangereuses par Route (European Agreement concerning the International Carriage of Dangerous Goods
by Road)
IMDG: International Maritime Code for Dangerous Goods
IATA: International Air Transport Association
GHS: Globally Harmonized System of Classification and Labelling of Chemicals
EINECS: European Inventory of Existing Commercial Chemical Substances
ELINCS: European List of Notified Chemical Substances
CAS: Chemical Abstracts Service (division of the American Chemical Society)