HiLevel Cad Module Gap Analysis Document for Ref

7/31/2019 HiLevel Cad Module Gap Analysis Document for Ref

1/36

TARGET

TO CREATE LINES 1

2

3

4

5

6

7

TO EDIT LINE 1

2

3

4

5

6


2/36

7

TO CREATE

CIRCLE1

2

3

TO CREATE

SURFACES1

2

3

4

5

TO EDIT SURFACE 1

2


3/36

3

4

5

6

7

8

TO EXTRACT

MIDSURFACE1

DEFEATURE 1

2

3

4

5

TO CREATE

SOLIDS1


4/36

2

3

4

5

TO EDIT SOLID 1

2

3

4

5

6

TO EDIT EDGE 1

2

3

4

5

6


5/36

7

TO EDIT POINT 1

2

3

4

5

6

QUICK EDIT 1

TO TRANSLATE

TO PROJECT

-to plane

-to vector

-to surface

-to line

TO ROTATE

TO REFLECT


6/36

TO POSITION

TO ALIGNNORMALS

TO MASK


7/36

METHODS INPUT

From Nodes Nodes

By Offset Lines

From surface edges surfaces

From features FE data

At intersectionsurfs/plane, surfs/surfs,

elems/surfs and lines/plane

At tangent Node

At fillet Lines

TO COMBINE TWO LINES.

TO SPLIT LINES AT AN ARBITRARY POINT

TO SPLIT LINES AT JOINT

TO SPLIT AT LINES AT LINE.

TO SPLIT AT PLANE AT PLANE.

TO SMOOTH A LINE


8/36

TO EXTEND A LINE

center and radius Center

Points and vector Nodes

Three points Three nodes

Ruled Nodes

Spline/Filler lines or surface edges

Nodes

Points

Skin Lines

Drag/spin

-Along vector Nodes (or) Lines

-Along line Nodes and Line

-Spin Nodes (or) Lines

Fillet Lines

TO TRIM (SPLIT) A SURFACE USING NODE

TO TRIM (SPLIT) A SURFACE USING LINE.


9/36

TO TRIM A SURFACE WITH SURFACE / PLANE.

TO UNTRIM A SURFACE

TO OFFSET A SURFACE

TO EXTEND A SURFACE

TO SHRINK A SURFACE

AUTOCLEANUP

MIDSURFACE surfaces

Pinholes Surfaces

Surface fillets surfaces

Edge fillets surfaces

Duplicates surfaces

symmetry surfaces

From bounding surfaces Surfaces


10/36

Drag along vector surfaces

Drag along normal surfaces

Drag along line surfaces and line

Spin surfaces

TO TRIM (SPLIT) A SOLID USING NODE

TO TRIM (SPLIT) A SOLID USING LINE.

TO TRIM A SOLID WITH SURFACE / PLANE.

TO MERGE (COMBINE) SOLIDS

TO DETACH SOLIDS

BOOLEAN.

TO TOGGLE A EDGE

TO (UN)SUPPRESS

TO REPLACE EDGES.

TO EQUIVALENCE .

TO UNSPLIT EDGES.

EDGE FILLET


11/36

BY FEATURE

TO ADD A POINT

TO SUPPRESS ( REMOVE)

TO REPLACE

TO RELEASE A POINT.

TO PROJECT A POINT.

TO TRANSLATE

WASHER SPLIT

Surfaces,nodes or lines

Nodes,lines or points



Nodes,points

Nodes,lines,surfaces or points



12/36


surface, solid

Lines, solids,surfaces

MOUSE LEFT BUTTON-TO SELECT AN ENTITY, MOUSERIGHT BUTTON-TO DESELECT AN ENTITY, MOUSE

SCROLL BUTTON-TO EXECUTE THE COMMAND


13/36

ENTITY SELECTION PROCESS

By path

By list

By window

Show node order

1. Offset by midline

2.offset by certain distance

Pick the surface edgessurfaces

By window,dispalyed,by collector,on plane,By adjacent,By geomery,by attached,by face


By list,By window, By path

pick the line

a. BY SELECT POINT ON LINES.

a. BY SELECTING A POINT ON LINE.

a. SPLIT AT JOINING POINT.

a. SPLITTING AT INTERSECTION.

a. BY SELECTING AXIS AND BASE POINT

b. BY SELECTING PLANE AND BASE POINT.

c. BY SELECTING VECTOR AND BASE POINT.

a. SELECTING LINE WITH TOLERANCE


14/36

b. SMOOTHING AT CORNERS WITH MIN TANGENT ANGLE

a. SELECTING THE POINT WITH REQUIRED DISTANCE.

By list,By window

By list,By window

By list,By window

By path

By list

By window

Show node order

By window,dispalyed,by collector,on plane,By adjacent,By geomery.

By path,by window,list

By path,by window,list

By window,dispalyed,by collector,on plane,By adjacent,By geomery.




by window, by geometry

a. WITH TWO NODES.

b. WITH MUILTPLE NODES.

c. NODES NORMAL TO EDGE.

a. WITH CUT LINE BY DRAGING.


15/36

b. WITH A LINE NORMAL TO SURFACE.

c. BY OFFSETING EXITING LINE TO REQUIRED DISTANCE.

a. BY SELECTING PLANE AND BASE POINT.

b. SPLITTING AT INTERSECTION OF TWO SURFACE.

a. PICK THE SURFACE

b. ALL TRIM LINES OF A SURFACE

a. CONTINUOUS METHOD

b. DISCONTINUOUS METHOD.

a. WITH DISTANCEb. WITH LINE OR EDGE

a. SURFACE WITH OFFSET VALUE.










16/36





a. BY SELECTING A SOLID AND NODES.

b. BY SELECTINF A SOLID AND POINTS.

a. WITH CUT LINE BY DRAGGING.

b. WITH BOUNDARY LINE.

c. WITH SWEEP LINE.

a. BY SELECTING PLANE AND BASE POINT.

b. SPLITTING AT INTERSECTION.

a. MERGE

a. TO DETACH

a. SIMPLE ( A+B, A*B, A-B, {A-B, B} ).

b. ADVANCE ( A+B, A*B, A-B, A^B, A )

a. PICK THE EDGES.

a. SELECTING LINES.

a. SELECTING LINES.

a. SELECTING SURFACE.

a. AT CURSOR POINT.



17/36


a. PICK THE POINTS.

b. AT EDGES

c. ON SURFACE.

a. PICK THE POINTS.

b. MULTIPLE POINTS.

a. PICK THE POINTS.

a. PICK THE POINTS.

a. POINT TO EDGE

b. POINT TO SURFACE

c. INTERNAL POINT TO SURFACE.

a. SELECTING LINE AND OFFSET VALUE.









18/36





19/36

DESCRIPTION

Select the first and last nodes of the required series of nodes

Select all the nodes required in sequence

Draw a window covering the required nodes

displays the order of nodes in the sequence by which it has been

selected

Select the two lines whose midline is required

select a line and specify the offset distance

select the edge of a individual surface to create lineselect a group of surfaces

select the required elements

Select any pair of intersecting entitites

To create lines at the tangent of a node to an existing line

To create lines forming fillets between two intersecting lines


20/36

pick the center and specify the radius

Pick the point and specify the direction

Pick the 3 points on the circumference of the circle

Select the first and last nodes of the two node sets between whom

surface is to be created

Select the nodes individually in both node sets in sequence and in an

identical order.

Select the nodes of the two node sets by drawing a window around

displays the order of nodes in the sequence by which it has been

selected

Create surfaces by selecting lines or surface edges to fill gaps.

Create surfaces by selecting an enclosed set of nodes

Create surfaces by selecting an enclosed set of points

Create surface by selecting nodes and dragging along a vector

direction

Create surface by selecting nodes and dragging along a line

create surfaces by rotating nodes or lines about a vector axis


21/36

Create a surface in the middle of the selected surfaces.

Finds and removes pinholes within a specified value of diameter

Finds and removes surface fillets within a specified range of radius

Finds and removes edge fillets within a specified range of radius

Finds and deletes duplicates layers with respect to the specified

cleanup tolerance value

Used to find the presence of symmetric surfaces with respect to an

axis and a base point.

Create soilds by selecting the boundary surfaces


22/36

create solids by dragging surfaces along a vector direction

create solids by dragging surfaces along their normal direction by

specifying the distance

create solids by dragging surfaces along a line

create solids by rotating surfaces about a vector axis


23/36

Nodes,lines or surfaces can be translated along a vector axis for

desirable magnitude.

nodes,lines or points can be projected to a desired plane along a

vector axis

nodes,lines or points can be projected to a desired vector along an

axis

nodes,lines or points can be projected to a surface along an axis

nodes or points can be projected to a line along an axis

nodes,lines,surfaces or points can be rotated around an axis in space

It is used to reflect portions of a model about a plane, changing the

selected portion into a mirror image of itself.


24/36

It is used to specify a new position for model entities.Changing

position is accomplished by picking six nodes that define a

transformation for the selected entities: three nodes represent the

entities starting position, and three corresponding nodes define the

selected entities ending position.

to display the normals of selected components

to mask(hide) the desired components


25/36

MOUSE FUNCTIONS (GENERAL)

LEFT BUTTON-TO SELECT AN ENTITY,RIGHT BUTTON-TO DESELECT AN ENTITY,SCROLL BUTTON-TO EXECUTE THE

COMMAND

LEFT CLICK THE POINTS TO BE COMBINED.


26/36

BY LEFT CLICKING AT REQIRED AREA OR BY EXITING NODES

BY LEFT CLICKING AT REQIRED AREA OR BY EXITING NODES

LEFT CLICK MOUSE AND DRAGING


27/36

LEFT CLICK MOUSE AT REQIRED BASE POINT.

LEFT CLICK THE TRIMMED SURFACE TO UNTRIM

LEFT CLICK THE TRIMMED SURFACE TO UNTRIM

LEFT CLICK THE SURFACE AND SEPRATOR LINEWITH OFFSET DISTANCE.

LEFT CLICK THE SURFACE WITH OFFSET DISTANCE.

BY LEFT CLICKING THE SURFACE.BY LEFT CLICKING THE SURFACE.

LEFT CLICK THE SURFACE WITH REQUIRED OFFSET VALUE.

BY LEFT CLICKING THE SURFACE TO PERFORM BASIC AUTOMATIC GEOMENTRY CLEANUP.


28/36

LEFT CLICK THE SURFACE AND NODES TO TRIM THE SOLID.

LEFT CLICK MOUSE AND DRAGING

LEFT CLICK THE SURFACE AND BOUNDARY LINE TO SELECT.

LEFT CLICK TH E SURFACE TO SELECT AND SELECT SWEEP LINE TO WHICH THE SOLID TO BE TRIMMED.

LEFT CLICK MOUSE AT REQIRED BASE POINT.

LEFT CLICK TWO SOLID TO BE MERGE (COMBINE).

LEFT CLICK TWO SOLID TO BE DETACHED (SPLIT).

PERFORMS COMPLEX MERGE AND SPLIT FUNCTIONS ON SOLIDS.

PERFORMS COMPLEX MERGE AND SPLIT FUNCTIONS ON SOLIDS.

LEFT CLICK THE EDGE TO BE TOGGLED.

LEFT CLICK THE EDGE TO SUPPRESS OR UN-SUPPRESSES.

REPLACE AN EDGE WITH ANOTHER NEARBY EDGE.

LEFT CLICK EDGES TO COMBINING THE FREE EDGES INTO SHARED EDGES.

LEFT CLICK THE EDGE TO BE UNSPLITTED.

REPLACE THE CURVE AT THE JUNCTION OF TWO NON-COLLINEAR EDGES WITH A STRAIGHT LINE.


29/36

COMBINE SURFACES BASED ON FEATURE LINES.

LEFT CLICK AT REQUIRED AREA



LEFT CLICK REQUIRED POINT TO BE SUPPRESS

LEFT CLICK REQUIRED POINTS TO BE SUPPRESS

LEFT CLICK REQUIRED POINT TO BE REPLACED


LEFT CLICK REQUIRED POINT TO BE PROJECTED.



LEFT CLICKING AT REQUIRED AREA TO TRIM SURFACE , RIGHT SELECT TO UNDO TO PREVIOUS POINT AND

CENTRE CLIK TO TERMINATE THE OPTION


30/36


31/36

OUTPUT

Line

Line

Line

Line

Line

Line


32/36

circle

circle

circle

Surface

Surface

Surface

Surface

Surface

Surface

Surface

Surface

Surface

Surface

Surface


33/36

Midsurafce

pinholes removed

Fillets captured

Fillets captured

Removal of duplicatesurfaces

Retrieval of

symmetric surfaces

Solids


34/36

Solids

Solids

Solids

Solids


35/36

Entity translation

Entity projection

Entity projection

Entity projection

Entity projection

rotation of entities

Reflection of entities


36/36

Position of entities

normals displayed

components masked

HiLevel Cad Module Gap Analysis Document for Ref

Documents