Hilco Industrial, LLC WebCast/OnsIte auCtIOn - Maynards€¦ · Hilco Industrial, LLC WebCast/OnsIte auCtIOn ... Automatic Angular Positioning +/- 110°; Peripheral ... vertICaL JIg

Hilco Industrial, LLC

WebCast/OnsIte auCtIOnBy order of secured party

A u c t i o n e e r s • L i q u i d a t o r s • A p p r a i s e r s

31555 West Fourteen Mile Road, Suite 207

Farmington Hills, Michigan 48334

Ph 877.37.HILCO (44526) • Fx 248.254.9995

Hilco Industrial, LLC

www.hilcoind.com

21700 Northwestern Hwy • Suite 1180

Southfield, Michigan 48075-4923

Ph 248.569.9781 • Fx 248.569.9793

www.maynards.com

Auctioneers • LiquidAtors • ApprAisers

IMPORTA

NT NOTE:

Due to circ

umstances beyond our contro

l the Auctio

n for K

ingsbury has been postponed.

We are sorry fo

r any in

convenience this has caused.

to schedule an auction, please call Hilco Industrial, LLC at 1.877.37.HILCO (44526)2

WebCast/OnsIte auCtIOndIreCtIOnsfrOM ManCHester aIrPOrt (MHt) : exIt vIa aIrPOrt rd tO brOWn rd/rte

3a. traveL 1.5 MILes and Merge WItH rt-101W (tOWards bedfOrd/

nasHua/COnCOrd). traveL 2.7 MILes and COntInue On rt-101 (tOWards

MILfOrd/Keene). traveL West On rt-101 fOr aPPrOx 51 MILes (Past MILfOrd,

WILsOn & PeterbOrOugH). as yOu enter Keene, rt-101 beCOMes MaIn

st/MarLbOrO st. turn rIgHt OntO OPtICaL st and traveL severaL bLOCKs

tO MarLbOrO st. turn Left OntO MarLbOrO st and traveL severaL bLOCKs

tO LaureL On rIgHt. WatCH fOr auCtIOn sIgns and turn rIgHt OntO LaureL

st tO PLant sIte.

furtHer InfOrMatIOn• an 18% buyer's PreMIuM WILL be CHarged On aLL assets. tHe buyer’s

PreMIuM WILL be reduCed tO 15% fOr PayMents Made by CasH, COMPanyCHeCK Or WIre transfer. auCtIOn WILL be COnduCted In engLIsH, aCCePt-Ing u.s. CurrenCy OnLy.

• REMOVAL DEADLINE IS NOVEMbER 4th WIth hOURS OF REMOVAL bEtWEEN 8AM tO4PM MONDAY thRU FRIDAY. AFtER thE REMOVAL DEADLINE, bUYER WILL INcUR A cOStOF $500 PER DAY FOR ENtRY INtO thE FAcILItY.

• fOr furtHer InfOrMatIOn On MaCHInery & equIPMent, PLease COntaCt Ken PLanet at 248.254.9999 x33 Or eMaIL [email protected]

• fOr PayMents PLease COntaCt LesIa JOsePH at 616.732.1800 x19 Or [email protected] Or HILCO aCCOunts reCeIvabLe [email protected]

• fOr CustOMer servICe, PLease COntaCt sandI neeLy at 248.254.9999 x16 OreMaIL [email protected]

auCtIOn date

tuesday, OCtOber 11tH

begInnIng at 9aM LOCaL tIMe

PrevIeW date

MOnday OCtOber 10tH

9aM tO 4PM LOCaL & MOrnIng Of saLeFor earlier inspection, please contact ken planet at 248.254.9999 x33 or email [email protected]

auCtIOn & PrevIeW LOCatIOn80 LaureL street

Keene, nH 03431

traveL InfOrMatIOnHOteLs

HOLIday Inn exPress – (603) 352-7616

best Western – (603) 357-3038

COurtyard by MarrIOtt – (603) 354-7900

days Inn – (603) 352-9780

by order of secured party

HILCO IndustrIaL, LLC& Maynards IndustrIes

CNC UNIVERSAL CYLINDRICAL

GRINDERS / CNC ID GRINDER2 – STUDER MODEL S40 CNC UNIVERSAL CYLINDRICAL

GRINDERS, S/Ns 011.0102.60.016 (1995) &011.0094.60.016 (1994), Swing 13.7", Centers 39.4" Max,Center Height 6.9", Travels: X – 10.8", Z – 41.4"; Max Swivelof Table 8.5°, GE Fanuc 16-GC Control, Coolant

1 – STUDER MODEL S40-2 CNC UNIVERSAL CYLINDRICALGRINDER, S/N 4175.25 (1992), Swing 17.8", Centers 63"Max, Travels: X – 10.8", Z – 65"; Dressing Fixture, CoolantSystem, Studer Control, Coolant, Sony 2-Axis DigitalReadout

1 – VOUMARD MODEL 150 CNC I.D. GRINDER, S/N 150005(1994), Swing 20", Travels: X (Radial Feed) – 7.87", Z (AxialFeed) – 19.7"; Automatic Dressing Fixture, 8" Diameter 3-Jaw Chuck, GE Fanuc Series 16-GC, Coolant

CNC DOUBLE COLUMN

GRINDER1 – FAVRETTO MODEL TU/N 5000 SIZE

150/150/5000 CNC DOUBLE COLUMNGUIDE & SURFACE GRINDER, S/N03157, Table 53" x 202" (1350 mm x 5120mm), Between Columns 60" (1520 mm),Max Grinding Length 197" (5000 mm),Max Longitudinal Stroke 207" (5250 mm),Travels: X – 60", Y – 197", Z – 60";Universal Wheelhead – Max Vertical Travel11.82" (300 mm), Automatic AngularPositioning +/- 110°; PeripheralWheelhead – Max Vertical Travel 5.91"(150 mm); Capable Machining TiltedPlanes, Coolant System, SiemensSinumeric CNC Control

to schedule an auction, please call Maynards Industries at 248.569.9781 3

surfaCe grInders • bOrIng MILLs • CnC MaCHInIng Centers

ROTARY SURFACE GRINDERS1 – BLANCHARD MODEL 36HD 66 66" ROTARY SURFACE GRINDER, S/N 15229,

Vertical Travel 48", Swing 80", Electromagnetic Chuck 66" Diameter, SegmentedGrinding Wheel 36" Diameter, 200-HP, Coolant

1 – BLANCHARD MODEL NO. 18 36" ROTARY SURFACE GRINDER, S/N 10115,Electromagnetic Chuck 36" Diameter, Segmented Grinding Wheel 18" Diameter, 30-HP,Coolant, Torit Hydro Flow Chip System

HORIZONTAL BORING MILLS1 – GIDDINGS & LEWIS MODEL PC-40 4" TABLE TYPE HORIZONTAL BORING MILL,

S/N 445-93-80, Table 48" x 96", Travels: X – 96", Y – 72", Z – 39"; Quill Feed 30",Spindle Speeds 0 to 1340 RPM, Giddings & Lewis Electronic Numeripath Control,Pendant, 50 Taper

1 – GIDDINGS & LEWIS TYPE 300 6" FLOOR-TYPE HORIZONTAL BORING MILL, S/N P-1003

CNC HORIZONTAL MACHINING CENTERS1 – DIXI MODEL 350TPA85CNC4400 4-AXIS CNC HORIZONTAL MACHINING CENTER,

S/N 350.51 (1993), Dual Pallets 31-1/2" x 39-1/4", Travels: X – 39.4", Y – 34.6", Z – 39.4"; 19-HP Spindle Motor, 85-Position ATC-50 Taper, Renishaw Model M17Machine Interface, Dixi 4400 CNC Control With CRT Pallet Loading Station

1 – KINGSBURY MODEL HM-500 CNC HORIZONTAL MACHINING CENTER, S/N B-13573, Pallet Size 19.68" x 19.68", Spindle Speeds to 9000-RPM, Pallet Changer, B-Axis 360,000°, Travels: X – 21.650; Y – 31.496", Z – 15.750", 28-Position ATC-HSK63A, GE Fanuc Series 16M Control

1 – MACHINING SYSTEMS MODEL HMC-40 CNC HORIZONTAL MACHINING CENTER,JOB #160, Pallet 28" x 28", Travels: X – 40", Y – 40", Z – 28.2", Spindle Speeds To 2400RPM, With 4-Station Rotary Pallet Handling System, 48 Position ATC-50 Taper, Delta20 CNC Control

1 – MACHINING SYSTEMS MODEL HMC-40 CNC HORIZONTAL MACHINING CENTER,S/N JOB #112, Pallet 22.5" x 22.5"; Travels: X – 30", Y – 28", Z – 20"; Spindle Speedsto 3000-RPM, 4-Station Rotary Pallet Handling System, 48 Position ATC-50 Taper, Delta10 CNC Control

CNC VERTICAL MACHINING CENTERS2 – HURCO MODEL BMC 4020HT 3-AXIS CNC VERTICAL MACHINING CENTERS,

S/Ns Q6043 & Q6086 (1996), Table 19.7" x 47", Travels: X – 40", Y – 20", Z – 24";Spindle Nose-Table 6" – 30", 20 HP, Spindle 6500-RPM, 24-Position ATC-40 Taper,Chip Conveyor, Hurco Model Ultimax 3 Control

2 – KITIGAWA MODEL TB-250 9" DIAMETER INDEXING TURNTABLES, ChuckModel JNO9T, S/N A6009; Type TS-250R Tail Stock

CNC GANTRY TYPE MACHINING CENTERS2 – KINGSBURY MODEL VMC 960 CNC GANTRY TYPE VERTICAL MACHINING

CENTERS, S/N BH10-1065 (1996), Table 60" x 98", Between Uprights 82", Travels:X – 96", Y – 66", Z – 18"; (2) Chip Conveyors, S/N N/A (1992), Table 42" x 98",Between Uprights 58", Travels: X – 96", Y – 48", Z – 18", Both with Spindle Speeds35 to 4000 RPM, 30-Position ATC-50 Taper, Riser Plate, GE Fanuc Series 15M Control

PLaner MILL • CnC turnIng Centers • KIngsbury CnC equIPMent

for more information, please visit us on the web at www.hilcoind.com4

DOUBLE COLUMN PLANER MILL1 – ROCKFORD DOUBLE COLUMN PLANER MILL, S/N 115-RM-33 (1966), Table

48" x 288", Between Uprights 57", Under Rail 48", Rail Mounted Head, (2) Side Heads,(3) TriOnics Model 5000 DRO, Chip Conveyor

CNC TURNING CENTERS1 – CINCINNATI MILACRON MODEL 1212 12U-40 CNC TURNING CENTER,

S/N 532OU12-90-001 (1990), Swing 17", Hole Through Spindle 4", 12" Diameter 3-Jaw Chuck, 8-Position Toolholder, Programmable Tailstock, Model Acramatic 850Control, CRT, Jorgenson Chip Conveyor; LNS Model Hydrobar Bar Feed

1 – HARDINGE CONQUEST CNC TURNING CENTER, Model T51SP, S/N CLT-502-CSP(1995), Turning Diameter 10.43”, Turning Length 22.8”, 10-HP Motor, 10-Position ToolHolder, with Programmable Tailstock, Chuck, Chip Conveyor, GE Fanuc Series 18T Control

1 – HARDINGE CONQUEST CNC TURNING CENTER, Model T42-L, S/N SGA-1313-B (1996),Turning Diameter 8”, Turning Length 24”, 10-HP Motor, 12-Position Tool Holder, withProgrammable Tailstock, Chuck, Chip Conveyor, GE Fanuc Series 18T Control

1 – CINCINNATI MILACRON MODEL SERIES 1210 CINTURN 10U-40 CNC TURNINGCENTER, S/N 5320U10-86-013, Rohn 10" Diameter 3-Jaw Chuck, 6-Position ToolHolder, Programmable Tailstock, Chip Conveyor, Model Acramatic 850 CNC Control

KINGSBURY CNC EQUIPMENT1 – KINGSBURY MODEL VTC-4 VERTICAL TURNING SYSTEM (1996), Travels:

X – 37.4", Z – 9.84"; Width 29.5", Spindle Speeds to 3500, Anti-Friction Roller, GE Fanuc Series 16T CNC Controls

1 – KINGSBURY MODEL CYBER-CELL HIGH-SPEED MACHINING CENTER (1994),Travels: X – 21.65", Y – 23.62", Z – 28.34"; Spindle Speed to 25,000-RPM, 35-HPMotor, 4-Axis Polymer Resin Base with Column, Hydraulic Drawbar, 40 Position ATC

VERTICAL BORING MILLS/TURRET LATHES1 – NILES 120" VERTICAL BORING MILL, S/N 21335, Table Diameter 120", Swing

124", (2) Rail Mounted Boring Spindles, Face Plate With 4-Jaws1 – KING 72" VERTICAL TURRET LATHE, S/N 1506, Table Diameter 62", Swing 72",

(2) Rail Mounted Boring Spindles, 25-HP Motor, Face Plate With 4-Jaws1 – CINCINNATI MODEL HYPRO 102" VERTICAL TURRET LATHE, S/N 5695, Table

Diameter 90", Swing 102", (2) Rail Mounted Boring Spindles, Side Mounted SwivelTool Holder, 30-HP Motor, 3.4 to 135-RPM, Face Plate With 4-Jaws

HORIZONTAL JIG MILLS1 – HERBERT DEVLIEG MODEL 43H-72 4" HORIZONTAL JIG MILL, S/N E5017, Table

35" x 72", Travels: X – 72", Y – 48", Z – 16"; 15 HP Spindle Motor, Speeds 1000-RPM,AutoCon Model DynaPath Delta CNC Control

2 – DEVLIEG MODEL 43K-72 4" HORIZONTAL JIG MILLS, S/Ns 10097 & 9973, Table35" x 72", Travels: X – 72", Y – 48", Z – 16"; 15-HP Spindle Motor, Spindle Speeds to1450 RPM, GE Mark Century 1050 & Bendix Numerical Control

1 – DEVLIEG MODEL 43K-48 4" HORIZONTAL JIG MILL, S/N 9815, Table 35" x 48",Travels: X – 49", Y – 48", Z – 16"; 15 HP Spindle Motor, Spindle Speeds to 1450 RPM,Bendix Numerical Control

vertICaL JIg bOrers • CnC JIg grInders • CnC aCCessOrIes

for more information, please visit us on the web at www.maynards.com 5

GANTRY TYPE VERTICAL JIG BORERS1 – MITSUI SEIKI MODEL J6 GA GANTRY-TYPE VERTICAL JIG GRINDER, S/N 127,

Table 33" x 41", Travels: X – 27", Y – 40"; Heidenhain 2-Axis Digital Readout,Pendant Control

1 – SIP MODEL HYDROPTIC-7A GANTRY-TYPE VERTICAL JIG BORER, S/N 4606,Table 40" x 60", Travels: X – 39.37" (1000 mm), Y – 55" (1400 mm); Quill Travel11.82" (300 mm), Max Space Below Spindle Nose 49.81" (1265 mm), BetweenUprights 63" (1600 mm), 7.5-HP Spindle Motor, Spindle Speeds 40-2,000 RPM

2 – SIP MODEL SIP-600 CNC GANTRY-TYPE VERTICAL JIG BORERS, S/N 0804 &0707, Table 43.3" x 33” (1100 mm x 842 mm), Between Columns 43.3" (1100 mm),Travels: X – 39.37" (1000 mm), Y – 27.56" (700 mm), W – 30.71" (780 mm); 8-HPSpindle Motor, Servo Drives, Anilam Commando Control, 2-Axis DRO

1 – PRATT & WHITNEY 4E VERTICAL JIG BORER, S/N 26199, 48” Diameter T-SlotRotary Table, Extended Table Size 36" x 78"

CNC JIG GRINDERS1 – MOORE NO.3 3-AXIS CNC VERTICAL JIG GRINDER, S/N G276, Table 11" x 24", Servo Drives

Plus Feeds, GE Fanuc Model Series O-M Control, Control S/N E94300007 (CNC Retrofit 1994);Feed Rates: X & Y – 38 mm/min, U – 28 mm/min, C 20 RPM

1 – MOORE NO.3 VERTICAL JIG GRINDER, S/N G1393, Table 11" x 24"

QUANTITY MOORE ROTARY TABLES, SPINDLES, CABINET

CNC ACCESSORIES, ROTARY TABLES & ANGLE PLATES1 – MAHO MODEL V420 TOOL PRESETTER, S/N V420/61 (1989), With 2-Axis Digital Readout

1 – GIDDINGS & LEWIS ROTARY TABLE, S/N 040-1677-48, Plate Size 30" x 48"

9 – DEVLIEG AIR LIFT ROTARY TABLES, Plate Size 70” x 50” to 30" x 30"

1 – GIDDINGS & LEWIS HYDROSTATIC LIFT ROTARY TABLE, S/N 40-1658-78,T-Slotted Plate Size 36" x 36"

1 – SIP MODEL PD-6H "ROTOPTIC" ROTARY TABLE, No. 175, Diameter 31.5"

3 – SIP 32" POWER ROTARY TABLES

3 – YUASA 550 SERIES ROTARY TABLES, S/Ns N/A, 3-Jaw Chuck Diameter to 15.75”

OVER 1000 50 TAPER & Over 300 40 TAPER TOOL HOLDERS

QUANTITY TOOL HOLDER STORAGE RACKS

QUANTITY RISER PLATES

QUANTITY ANGLE PLATES to 72" W x 60" H x 34" D

(ROTARY TABLES May be Offered With or Without Mills)

fabrICatIOn equIPMent • vertICaL & HOrIzOntaL band saWs


FABRICATION EQUIPMENT1 – ACCURPRESS MODEL 725012 250 TON

HYDRAULIC PRESS BRAKE, S/N 5885 (1999),Overall Bed & Ram 12', Between Housings 10' 4",ETS Model 3000 CNC Control, 2-Axis CNC BackGauge, Stroke 8", Open Height 16", Throat Depth 10"

1 – MUBEA MODEL KBL560 61 TON MECHANICALIRONWORKER, S/N 0505281724486

1 – MUBEA MODEL KBL 44-4 3-1/2" X 3/8" MECHANICAL IRONWORKER, S/N 131/28732/22

1 – STRIPPIT MODEL SUPER 30-30 30-TON TURRETPUNCH PRESS, S/N 2287113090 (1990), 36"Throat, Manual Sheet Handler, Cabinet w/Punches &Tooling

1 – MG INDUSTRIES MODEL APOLLO 4X4 DUALTOUCH PROGRAMMABLE THERMAL CUTTINGSYSTEM, S/N AP4X4-PC/NC-94-2796 (1994), 12"Thickness Cutting Capacity, Burny Model 2.5 CNCProgrammable Control, 4' x 10' Wet Cutting Table,Linatrol # HL-8 Tracing Head

1 – CHICAGO DREIS & KRUMP MODEL BP06126 6' X12 GAUGE BOX & PAN BRAKE, S/N 318576

1 – CHICAGO DREIS & KRUMP MODEL BPO-412-6 4'X 12 GAUGE BOX & PAN BRAKE, S/N 300253

1 – NIAGARA MODEL 351 4' X 12 GAUGE INITIALPINCH MANUAL PLATE BENDING ROLL, S/N61897

1 – NIAGARA 36" INITIAL PINCH MANUAL PLATEBENDING ROLL, S/N 3343

1 – CINCINNATI MODEL 1808 8' x 1/4" POWERSQUARING SHEAR, S/N 30688, Squaring Arm 82",Two (2) Stock Supports, 30" Front Operated PowerBack Gauge

QUANTITY – PRESS BRAKE DIES & HOLDERS

BAND SAWS2 – MARVEL UNIVERSAL TILT TYPE VERTICAL

BAND SAWS, SERIES 81A, S/N E-307688, Throat19", Hydraulic Incremental Feed Table, SERIES V-10A, S/N D126710-W, Throat 14", Both With PowerClamping, Power Feed

1 – KALAMAZOO/STARTRITE 30" VERTICAL BANDSAW, S/N 5993H, Power Table Feed, Table 20.5" x20.5"

3 – GROB MODELS NS24 24" & NS18 18" VERTICALBAND SAWS

2 – DOALL MODELS ML & BF120 16" VERTICALBAND SAWS

1 – CONTINENTAL VERTICAL BAND SAW

1 – KALAMAZOO H9AW 9" X 16" HORIZONTAL BANDSAW

surfaCe grInders • CenterLess grInders


SURFACE GRINDERS1 – GALLMEYER & LIVINGSTON MODEL F 30" X 72" X 36" HYDRAULIC

SURFACE GRINDER, S/N 1133072, Dressing Fixture, Power Spindle Elevation,Coolant System, 30" x 72" Electromagnetic Chuck

1 – MATTISON 36" X 120" X 36" HYDRAULIC SURFACE GRINDER, S/N 24014, 5-HP Vertical Way Grinding Jig Spindle, Coolant System, Power Spindle Elevation,(3) 36" x 40" Electromagnetic Chucks

2 – CHEVALIER MODEL FSG-1632AD 16" X 32" AUTOMATIC HYDRAULIC SURFACE GRINDERS, S/Ns G382B001 & G382B002 (1994), Power SpindleElevation, Over-The-Wheel Dressing Fixture, 16" x 32" Electromagnetic Chuck,Coolant, Sokki 2-Axis DRO

1 – OKAMOTO MODEL PSG-125 20" X 48" HYDRAULIC SURFACE GRINDER, S/N1538 (1979), Power Elevation, Coolant, Electromagnetic Chuck 20” x 48”

1 – OKAMOTO MODEL ACC-12.24DX 12" X 24" AUTOMATIC HYDRAULIC SURFACE GRINDER, S/N 64193 (1997), Coolant, Electromagnetic Chuck 12” x24”, DRO

1 – ARTER MODEL D1-16 16" ROTARY SURFACE GRINDER, S/N 2819, Chuck 18"Diameter, 5-HP Spindle Motor, Coolant

1 – GRAND RAPIDS MODEL 450 12" X 24" HYDRAULIC SURFACE GRINDER,S/N 450115, Power Spindle Elevation, Electromagnetic Chuck 12” x 24”, Rectifier,Coolant

1 – BRIDGEPORT MODEL 815 8" X 15" HAND-FEED SURFACE GRINDER, S/N 1554 (1979), 8" x 15" Walker Chuck, Coolant

2 – OKAMOTO MODEL 6.12/14 LINEAR 6" X 12" HAND-FEED SURFACEGRINDERS

1 – BOYAR-SCHULTZ MODEL H612 6" X 12" HAND-FEED SURFACE GRINDER

1 – HEALD MODEL 161 ROTARY SURFACE GRINDER, S/N 45754, 8" Chuck, 1.5-HP Motor, Coolant System

1 – UNISON MODEL OMNIGRIND 6" X 12" SURFACE GRINDER, S/N 5384,Motorized Centerless Grinding Attachment, 3 HP Motor

1 – TAFT-PIERCE 6" X 12" ROTARY SURFACE GRINDER, S/N 206

CENTERLESS GRINDER1 – CINCINNATI MODEL 325-12-DF

CENTURAMIC CENTERLESSGRINDER, S/N 350412H5V-1, GrindingWheel 12" Wide, 25-HP Motor, Over-The-Wheel Dressing Fixture, Coolant System, Infeed Box

MISC. GRINDERS1 – ERNEST H. FISCHER MODEL ZSM-P-1250 CENTER HOLE GRINDER,

S/N 290 (1992), Swing 16.5", Between Centers 48", Asset #8612 (LocGrinding Area)

2 – JONES & LAMSON TG1245 12" X 45" & TG636 6" X 36" THREADGRINDERS

1 – HEALD MODEL 273A UNIVERSAL INTERNAL GRINDER, S/N 437736,1.5-HP Workhead Motor, 5-HP Wheelhead Motor, Dressing Fixture

1 – BRYANT MODEL 112 HYDRAULIC I.D. CHUCKING GRINDER, S/NR8807

3 – NORTON TOOL GRINDERS

1 – HYBCO MODEL 2100-SB RELIEF GRINDER, S/N RF-837 (1976), Nikon8" Comparator

1 – DEVLIEG MODEL MICROPOINT TOOL GRINDER, S/N 173-300

MILLIng MaCHInes • brOaCHIng MaCHIne • tOOLrOOM equIPMent


MILLING MACHINES1 – HURCO MODEL KMB1 CNC VERTICAL MILLING MACHINE, S/N KX-

8007015D, Table 14" x 38", Hurco Model KMB1 Control

1 – BRIDGEPORT VARIABLE-SPEED VERTICAL MILLING MACHINE, S/N 12BR182346, 1-1/2-HP, Power Feed Table 9" x 42", Spindle Speeds to 4200RPM, Acu-Rite II 2-Axis DRO

1 – KEARNEY & TRECKER 10HP-2CK HORIZONTAL MILLING MACHINE, S/N 19-7289, Table 13-1/2" x 56"

1 – OKK MODEL MH-2P UNIVERSAL MILLING MACHINE, S/N 1759, Table 11-1/2"x 51-1/2", Spindle Speeds 60 – 1800 RPM, Newall Model Sapphire 2-Axis DRO

1 – ROWBOTTOM MODEL 325 CAM MILLING MACHINE, S/N 325-52-3

1 – PRATT & WHITNEY MODEL C THREAD MILLING MACHINE, S/N 550, Swing 6",Centers 60"

1 – U.S. KEWAMATIC MULTIPLE-SPINDLE VERTICAL KEY-WAY MILLINGMACHINE, S/N KC66200

1 – VAN NORMAN MODEL NO.2R7.5 UNIVERSAL MILLING MACHINE, Table 12" x 56"

HORIZONTAL BROACHING MACHINE1 – LAPOINTE MODEL HP-40 20-TON HORIZONTAL HYDRAULIC BROACHING

MACHINE, S/N H67025, Stoke 84", Retriever

TOOLROOM EQUIPMENT1 – CARLTON 6' ARM X 15" COLUMN RADIAL DRILL, Spindle Speeds

15 – 1500 RPM, (2) T-Slot Base Plates, (2) Tables, L-Base, 15 HP Motor

2 – CINCINNATI BICKFORD 3' ARM X 9" COLUMN RADIAL ARMDRILLS

1 – LEBLOND MODEL SERVO SHIFT 19" X 54" GEARED HEAD LATHE,S/N 4D845, Spindle Speeds to 1000 RPM, Taper Attachment

1 – COLCHESTER MODEL TRIUMPH 2000 15" X 60" TOOLROOMLATHE, S/N 6-004-209.79, Spindle Speeds 25 to 2000-RPM,Inch/Metric Threading, Removal Gap

1 – HARDINGE MODEL HC PRECISION TOOLROOM LATHE

1 – KINGSBURY CUSTOM KEYWAY SLOTTING MACHINE

1 – JONES & LAMSON 7A-3 SADDLE-TYPE UNIVERSAL TURRETLATHE, S/N 222128, Bar Feed

1 – CINCINNATI 16" HEAVY-DUTY TOOLROOM POWER SHAPER, S/N23287, 15" Shaper Vise

1 – ELECTRO ARC MODEL 2DBQT TAP DISINTEGRATOR, S/N 8518(1984)

1 – SUNNEN MODEL MBB-1680 HORIZONTAL HONE, Auto Stroker,Tooling

1 – GIDDINGS & LEWIS MODEL EXACTAMATIC DRILL POINTGRINDER

1 – PRATT & WHITNEY MODEL M-1689 10" X 20" SECONDARY OPER-ATION BENCH LATHE, S/N 449, 5C Collet Capacity, Split Bed

1 – HERMES MODEL EBM815 ENGRAVER (1999), Vanguard 7200Engraving Table, Graval Style 98 Software

gear MaCHInery • InsPeCtIOn • fInIsHIng equIPMent • WeLdIng


GEAR MACHINERY1 – NATIONAL BROACH & MACHINE MODEL GCI RED RING GEAR MACHINE, S/N GCI-574,

Capacity 8" x 18"

1 – BARBER-COLMAN MODEL TYPE A GEAR HOBBER, S/N 2270, Power Down Feed

2 – FELLOWS MODEL 8AGS VERTICAL GEAR SHAPERS, 5 HP

1 – BARBER-COLMAN MODEL 16-36 GEAR HOBBER, S/N 3401, Double Thread Index Worm PowerDown Feed

COORDINATE MEASURING MACHINES2 – ZEISS MODEL UPMC850 COORDINATE MEASURING MACHINES, S/Ns 78270 & 74461 (1987

& 1985), Approx Measurement Range: Y – 27.56" (700 mm), Z – 23.63" (600 mm); Granite Plate38" x 33"; HP Visualize B2000 Computer Control, UMess-e Pendant, Umess 8.3 Software(Upgraded 2005), Vast Probe Head, Controller

INSPECTION1 – SCHERR-TUMICO 30" OPTICAL COMPARATOR, S/N 353, With Model Quadracheck 2000 Digital

Readout, Asset #0566

1 – BROWN & SHARPE MICRO-HITE GAUGE, Printer

1 – ACMI MODEL 15A BORESCOPE

1 – HAMAR MODEL L711 LASER ALIGNMENT SYSTEM, S/N 3526-1

4 – WILSON ROCKWELL HARDNESS TESTERS

1 – PORTAGE MODEL 48A 4-TON LAYOUT MACHINE, S/N 4721522, Layout Table 100" x 70", RotaryTable 29" Diameter

Granite Plates, Micrometers. Height Gauges, Block Gauges, Bench Centers, Roundness Checkers,Electronic Indicators, Taylor Hobson Surface Analyzer, Calipers, Microscopes, V-Blocks

FINISHING EQUIPMENT1 – PANGBORN MODEL 6LK-5 ROTARY SHOT BLAST MACHINE, S/N

6LK-5621, Rotary Table 72" Diameter, Elevator, Reclamation System

1 – PANGBORN MODEL 1515 M1 WALK-IN 2-DOOR SHOT BLASTMACHINE, S/N N/A (1979), Roll-In Table 84" x 108", Door Opening 156"Wide; Chamber Approx 14' D x 15' W x 9' H; Dust Collector, Elevator,Reclamation System

4 – BLAST CABINETS – Size To 48” x 36”, Dust Collector

2 – AIR FLOW SYSTEMS MODEL DT3000-AC-BF-S 42" X 66" INDUS-TRIAL DUST CONTROL DOWNDRAFT TABLES

1 – BETTER ENGINEERING ROTARY CHAMBER PARTS WASHER, S/NSC-5420

WELDING EQUIPMENT1 – RANSOME MODEL 40-P 4,000 LB.

ROTARY WELDING POSITIONER,S/N 1815662, Table Diameter 36",Rotation Torque 24,000 In/Lbs

13 – MILLER ARC WELDING POWERSOURCES (To 2002)

1 – AIRCO MODEL 5DCB-245-A 500 AMPDC ARC WELDER

3 – HOBART MODEL T300 300 AMP ACARC WELDERS

1 – LINCOLN ELECTRIC MODEL WIREMATIC 250 250-AMP ARC WELDER

1 – MK PRODUCTS MODEL COBRA-MATIC MK3A MIG WELDER

1 – THERMAL ARC MODEL PAK5XRPLASMA CUTTING SYSTEM

1 – THERMAL DYNAMICS MODEL PAKMASTER XL PLUS PLASMA CUT-TING SYSTEM

1 – LINCOLN ELECTRIC MODEL SP-125PLUS PLASMA CUTTER

1 – HYPERTHERM MODEL POWERMAX600 PLASMA CUTTER

1 – THOMPSON MODEL TYPE 100 25KVA ROCKER ARM SPOT WELDER,Throat 24"

1 – PHOENIX MODEL 13 / TYPE 300ELECTRODE STABILIZING DRY RODOVEN

QUANTITY – WIRE FEEDS (To 2002)

Heat treat • aIr HandLIng systeMs • PIPe & tube equIPMent


HEAT TREAT EQUIPMENT1 – ERCO 11' X 8' X 5' H TABLE SIZE GAS-FIRED ROLLING HEARTH BOX

NORMALIZING FURNACE, S/N N/A, (6) North American Mfg. Burners, ChamberArea Approx 4'W x 8'H x 12'D, Max. Temp 1,600°F, Blower Exhaust

2 – IPSEN MODEL DLR-3-5E 1,400° F & 1,200° F ROLLER CONVEYORIZED DRAWFURNACES, Length Approx 10'

1 – MANNOR MODEL JSH-24 WASHER (1981), Opening Approx 70" W x 30" H, LengthApprox 10'

2 – C.I. HAYES MODEL VSQ 18-24-36 & VSQ 24-36-48 VACUUM SEALED QUENCHFURNACES, S/N 15915 (1981); Max Temp 2,400 & 2000°F, Stokes Pumps

1 – THERMONIC INDUCTION HARDENING SYSTEM

1 – NICKEL PENETRATE SYSTEM

1 – LINDBERG MODEL 09785-724 FSX HOMOCARB PIT-TYPE CARBURIZING FUR-NACE

1 – LINDBERG MODEL 1620-E12 FURNACE

1 – ANNEALING FURNACE (1988), Approx 8' W x 6' H x 9' D, Carbottom Truck

1 – UPTON MODEL UB SALT BATH FURNACE & UQS SALT QUENCH FURNACE

1 – AMERICAN ELECTRIC MODEL P-1024 LEAD POT, S/N 9063, With Quench Tank

AIR HANDLING SYSTEMS3 – TORIT 3-STATION FREESTANDING BAG HOUSE

DUST COLLECTORS

2 – TORIT MODELS MC 1000 3-HP & SDF6 10-HP DUSTCOLLECTORS

2 – TORIT DOWNDRAFT DUST COLLECTORS

4 – TORIT WALL-MOUNTED AIR CLEANERS

PIPE & TUBE EQUIPMENT3 – RIDGID MODEL 535 & 300 PIPE THREADERS

2 – GREENLEE MODEL 555 PORTABLE SPEED PIPE &TUBE BENDERS

8 – PARKER HANNIFIN MODEL 232B POWER TUBEFLARING MACHINES, Capacity 1/8" – 2" OD

1 – GREENLEE TUBE BENDER

1 – PARKER HANNIFIN MODEL PARFLANGE 1030TUBE FLARING MACHINE

1 – PARKER HANNIFIN MODEL 1025.110 TUBE BENDER, S/N 6506250699 (1999)

QUANTITY – RIDGID PIPE THREADING DIES

MISC SHOP EQUIPMENT1 – IRD MECHANALYSIS HORIZONTAL BALANCER, Approximately

5000-Lb. Capacity, With CSI Model 2115 Controller

1 – COLDWELL MANUFACTURING CO. MODEL POSITURNER 1-120-18L PRODUCT MANIPULATOR, S/N 1-89-116

1 – MILWAUKEE 1/2" MAGNETIC DRILL, Base S/N 005982262

1 – PSI SYSTEMS CORPORATION PORTABLE SUMP CLEANER,S/N 1228

1 – CUSTOM 14" X 36" CERAMIC COATING LATHE

10 – FOOTBURT-REYNOLDS JACKKNIFE DRILL, 108" Swing,Radial Type Drilling Arm

1 – SO-LOW MODEL PR1200-15 ULTRA LOW FREEZER, S/N9495483 (1995), Temp Range -40° to -120° F

1 – DIVINE BROTHERS MODEL VCS3 DOUBLE-END BUFFINGMACHINE, S/N MM2570, 3-HP, Dust Collector

6 – MANUAL PAINT BOOTHS to 12’ W x 12 D x 10’ H, Regulators,Rotary Tables to 96” Diameter

1 – PARKER HANNIFIN S-201A 20-TON HYDRAULIC GAP FRAMEPRESS

3 – K.R. WILSON & DAKE 75-TON HYDRAULIC H-FRAME PRESSES

1 – MILWAUKEE HEAVY-DUTY CHOP SAW, With Custom FabricatedFeed Table

2 – PORTABLE STARTER PUMPS, 50-HP

1 – IDEAL MODEL NO.14 STENCIL CUTTING MACHINE, S/N 7361

1 – WALKER MODEL 2761 MAGNETIC LIFTING DEVICE, S/N 1553,Max Load 880 Lbs

QUANTITY – STEADFAST ROULSTON, GREENERD & DAKEARBOR PRESSES

QUANTITY – LISTA WOOD TOP WORK BENCHES

QUANTITY – LISTA MULTI-DRAWER STORAGE CABINETS

Saws, (10) Drill Presses, Belt Grinder, Steam Cleaner, Baler, ShopFans, Steel Work Tables, Vises, Pallet Racking, Ladders, Pallet Jacks,Shop Vacs, Storage Cabinets, Clamps, Cutters, Pneumatic Tools

QUANTITY – Office Equipment including: Desks, Chairs, TelephoneSystem, Printers

aIr COMPressOrs • Cranes • rOLLIng stOCK & fOrKLIfts


AIR COMPRESSORS / DRYER3 – AIR COMPRESSORS to 200-HP

1 – ZEKS 1000 HSEA A400 HEAT SINK AIRDRYER (Mezzanine Mounted)

1 – AIR RECEIVER TANK

1 – WAYNE 2-STAGE AIR COMPRESSOR,5-HP

BRIDGE CRANES7 – DWIGHT FOOTE 7.5 TON TO 15-TON, Span 50’

8 – WRIGHT 5-TON TO 10-TON, Span 50'

4 – BOSTON TRAMRAIL 15-TON, Span 50'

8 – DWIGHT FOOTE 7.5-TON TO 15-TON, Span 30’

3 – WRIGHT 5-TON, Span 30’

4 – 10-TON, Span 30’

3 – SPANCO 5-TON & GAFFEY 2-TON SEMI-GANTRY

15 – JIB CRANES TO 2 TON

FORK LIFT TRUCKS1 – HYSTER MODEL H155XL 15,500-LB. CAPACITY LPG LIFT TRUCK, S/N

F006D02003R (1994), Max Lift 94.5", Pneumatic Tire, Front Dual Wheels, WithSide Shift, Enclosed Heated Cab

1 – CLARK MODEL C500 30 3,000 LB. CAPACITY FORKLIFT, S/N 2354264306, LPType, Max Lift 106", 2-Stage Mast

1 – CLARK GPS15 2,700 LB. CAPACITY FORK LIFT, S/N GP127-209-6800 FA(1988), LP Type, Max Lift 188", Solid Tire

3 – OTIS X-TREND-R & CLARK 6PS15 2700-LB. & CATERPILLAR 5000-LB.(1995)LPG FORK LIFTS

9 – RAYMOND (1997) & YALE 3000-LB., (6) CROWN 2000-LB. & PRESTO 1000-LB. ELECTRIC LIFT TRUCKS

3 – CLARK HWP60E 6000-LB. PALLET JACKS

ROLLING STOCK1 – TENNANT MODEL 215E FLOOR SCRUBBER, S/N N/A, Electric Type

1 – SKYJACK MODEL 3220 700-LB. CAPACITY SCISSOR LIFT, S/N 64001,Electric Type

2 – FORD F-350 3/4-TON 4X4 & CHEVROLET C1500 1-TON PICKUP TRUCKS(Both 1996)

1 – INTERNATIONAL MODEL S1900 INTERNATIONAL 6-WHEEL TRUCK CHASSIS (1986), VIN: 1HTLDTVNXGHA46914, Diesel Engine, Iroquois 18' x 8'Flatbed, (Yard Truck), Dual Tank, Miles 255,171

1 – FORD F700 WATER TRUCK (1977), GVWR 24,000 Lbs; DECKER Water Tank –Tank Capacity 600 (Front) / 1600 (Rear) Gallons, Miles 80,267

1 – DRESSER 520K DIESEL WHEEL LOADER, Bucket Width 96", Hours 6,269

1 – 12’ SNOW PLOW ATTACHMENT

1 – BUICK LACROSSE 4-DOOR SEDAN (2005), VIN: 2G4WC532351303776, 3800Series III V-6 Engine, Miles 20,624

1 – MERCURY MONTEGO PREMIER 4-DOOR SEDAN, VIN1MEFM43146G608726, Duratec Engine, Automatic, Miles 88,283

Headquarters

31555 W. Fourteen Mile Road, Suite 207Farmington Hills, MI 48334Ph: 877-37-HILCO (44526)Fx: 248.254.9995

www.hilcoind.com

Forwarding Service Requested

PresortedFirst Class MailU.S. Postage

PAIDDetroit, Mich.

Permit No. 2655

Hilco Industrial, LLCA u c t i o n e e r s • L i q u i d a t o r s • A p p r a i s e r s

HILCO Industrial, LLC is a division of Hilco trading, LLC • Headquarters 5 revere drive, ste. 206 • northbrook, IL 60062 • all rights reserved

Printed in usa • KIngsbury • nH auctioneer & License: tim Pfister License #6022 • IL License #444.000215

Please visit our website at www.hilcoind.com to review our complete terms and conditions.

Atlanta • Birmingham • Birmingham (UK) • Boston • Charlotte • Chicago • Connecticut • Dallas • Detroit • Grand Rapids • Guadalajara (MX) • Hong Kong (Greater China) •

Irapuato (MX) • Leeds (UK) • London (UK) • Los Angeles • Mexico City (MX) • Monterrey (MX) • New York • San Francisco • Singapore • Thailand • Toronto • Villahermosa (MX)

Terms of SaleAn 18% buyer's premium will be charged on all assets. thebuyer’s premium will be reduced to 15% for paymentsmade by cash, company check or wire transfer. Everythingwill be sold to the highest bidder for cash, in accordancewith the Auctioneer’s customary “terms of Sale”, copies ofwhich will be posted on the premises of the sale and sub-ject to additional terms announced the day of sale. All itemswill be sold “as is, where-is” without any warranties,expressed or implied. Although obtained from sourcesdeemed reliable, the Auctioneer makes no warranty orguarantee to the accuracy of the information herein con-tained. bidders are encouraged to thoroughly inspect theitems on which they intend to bid prior to sale. Absolutelyno items will be removed until the day after the conclusionof the sale and payment is made in full. Subject to addi-tions, deletions and prior sale.

Payment: ALL PURchASES MUSt bE PAID IN FULL ONthE DAY OF thE AUctION. If you intend to pay by wiretransfer, we will accept payment the day after the saleONLY IF a deposit of 25% of total purchases is made onthe day of the sale. contact our office for wire transferinstructions. Only cash, wire transfer or certified check,payable to hilco Industrial, LLc will be accepted. companychecks payable to hilco Industrial, LLc will be acceptedonly if accompanied by a bank letter of guarantee, (seesample letter below). All sales are subject to sales tax.Purchasers claiming exemptions from taxes must provideproof satisfactory to the Auctioneer of their entitlement toclaim such exemptions.

Sample Bank Letter(bank Name) unconditionally guarantees payment tohilco Industrial, LLc from (company Name). thisguarantee will be valid for purchases made at theAuction of Kingsbury on tuesday, October 11, 2011.

HILCO WebCast/OnsIte auCtIOn

FollowUs on:

By order of secured party

IMPORTA

NT NOTE:

Due to circ

umstances beyond our contro

l the Auctio

n for K

ingsbury has been postponed.

We are sorry fo

r any in

convenience this has caused.

Hilco Industrial, LLC WebCast/OnsIte auCtIOn - Maynards€¦ · Hilco Industrial, LLC WebCast/OnsIte auCtIOn ... Automatic Angular Positioning +/- 110°; Peripheral ... vertICaL JIg

Documents