www.termoventsc.rs High Pressure Strainers [SHP] DN 10 ÷ DN 250 PN 250 ÷ PN 500 Class 1500 ÷ Class 2500 • Y-Type [SHPY] Design • Forged or casted body and cover • Net is safely build in between body and cover Applications • Power plant, Chemical, Petrochemical, Refining Media • Depending on the valve materials: water, steam, gas, oil and oil derivates and other non aggressive media Pressure and temperature (Table C.4.9 and Table C.4.10 ) • Pressure up to 500 bar • Temperature up to 600 o C Materials (table C.4.1) • Carbon, heat resistant alloy and stainless steels Advantages • Possibility of installation in any position • Long service life • Respect to emission standards • Easy handling and maintenance Options • Threaded plug or valve installed on cover for quick draining • Flanges and welding ends according to : ASME, DIN, EN, GOST, etc. • Other paint finishes are available upon customer’s request • Strainer complete with counter flanges, bolting and gaskets Testing • Every produced strainer was tested according to EN 12266 and API 598 • Pressure seal design • Class 1500 ÷ Class 2500 C-04-SHP-EN-V1170617-R00.pdf We keep the right to change the design, materials and weights at any time without prior or direct notice.
4
Embed
High Pressure Strainers [SHP] - TERMOVENT SC …termoventsc.rs/english/wp-content/uploads/2017/04/C-04-SHP-EN-V... · High Pressure Strainers [SHP] DN 10 ÷ DN 250 ... GOST, etc.
This document is posted to help you gain knowledge. Please leave a comment to let me know what you think about it! Share it to your friends and learn new things together.
Transcript
www.termoventsc.rs
High Pressure Strainers [SHP]
DN 10 ÷ DN 250PN 250 ÷ PN 500
Class 1500 ÷ Class 2500
• Y-Type [SHPY]
Design
• Forged or casted body and cover
• Net is safely build in between bodyand cover
Applications
• Power plant, Chemical,Petrochemical, Refining
Media
• Depending on the valve materials:water, steam, gas, oil and oilderivates and other non aggressivemedia
Pressure and temperature (Table C.4.9 and Table C.4.10 )
• Pressure up to 500 bar• Temperature up to 600 oC
High Pressure Strainers PN 250 ÷ PN 500 / Class 1500 ÷ Class 2500 Face-to-Face (FTF) and End-to-End (ETE) dimensions according to ASME B16.10 / Manufacturer standard Flanged ends according to ASME B16.5 or EN 1092-1 Welding ends according to ASME B16.25 or EN 12627
C-04-SHP-EN-V1170617-R00.pdfWe keep the right to change the design, materials and weights at any time without prior or direct notice.