High pressure pump Supplier and manufacturer in India BDS Engineering
Welcome message from author
This document is posted to help you gain knowledge. Please leave a comment to let me know what you think about it! Share it to your friends and learn new things together.
Transcript
High pressure pump
Supplier and manufacturer in IndiaBDS Engineering
Two Types of High Pressure Pump
• Vertical Multistage Pump:1.CDL series pump2.GDL series pump
• Horizontal multistage pump1.CHDF series pump2.CHL series pump
Vertical Multistage Pump
Series : Vertical multistage pumpName : CDL series pump
Vertical Multistage Pump In India
CDL series pump: CDL/CDLF pump series are vertical designed
especially for high pressure, which is driven by a standard electric motor along with all parts touch with liquid are of stainless steel. Electric Motor comprise of TEFC motor, IEC standard, IP55, Class F, Aluminum housing and quadrate appearance, Motor bearing: NSK, 50HZ or 60HZ, 3-phase or Single phase
• The motor output shaft directly connects with the pump shaft through a coupling. This kind of pump can be equipped with an intelligent protector to effectively prevent it from dry-running, out-of-phase and overload.
CDL series pump
• Applications:
Urban water supply and pressure boosting Applicable to conveying noncorrosive liquidIndustrial circulating system and processing
systemCDLF is suitable for slightly corrosive liquid
Water supply for boiler, condensing systemFire fighting systemWater treatment and RO systemCooling water system
Operation Conditions of Pump
Clean, non-flammable and non-explosive liquid containing no solid granules and fibers.
Liquid temperature:Normal temperature type:-15 +70Hot water type:+70 +120Ambient temperature: up to+40Altitude: up to 1000m
GDL Multistage Pump
Series :Vertical multistage pumpName : GDL series pump
GDL series pump
• GDL Vertical Multistage pump adopt cast iron or stainless steel, all pump parts are casting. These kind of vertical multistage pump, have the advantage of energy-saving, small volume, stable performance, etc .The impeller can be cast iron, brass or stainless steel.
Dealer of Multistage pump India
• With hydraulic balance solve axial force, consequently pump runs smoothly. Shaft and sleeve are of hard quality alloy and adopt wear resistant mechanical seal.
• Electric motor:TEFC, two-pole standard motor, IP54, Class FCast iron motor, bearing: NSK·50HZ or 60HZ, 3-Phase
Typical applications:
Urban water supply and pressure boostingOffice buildings and high-rise buildings,
industrialIndustrial circulating system and processing
systemWater supply for boiler, condensing system Chemical process make-up water
Water treatment and infiltration systemAgricultural irrigation, Cooling water systemProduct FeaturesInstallation, maintenance convenient: Pipeline
installation, inlet and outlet could be like valve installed in the pipeline as any location and any direction
Pressure Pump
Less operation, Low cost, easy to maintain, Stainless steel casting, light weight
Pressure Booster Pump and Tank
• BDS Engineering a leading India based company Manufacturers of Water Pumps, Domestic Water Boosting Pumps suppliers in Delhi, Pressure Booster, Dewatering Pump, Drainage pump, Sump Pump, Water Pump, Pressure Vessels, sellers in India.
Contact us
• 1250Address: 318, Street No.4, Ground Floor, Govind Puri, Kalkaji, (Opp. Kalkaji Bus Depot) New Delhi - 110019
• Customer Care: +91-9311122211• Telefax: 011-26467250• Email: [email protected]• Career: [email protected]
Related Documents
