Page 1
Page 1
Submitted by: Date:
Type: Project:
Ordering Info:
Protected by one or more US Patents: 8915613; D702,391; D702,390; D700,732
High Performance 4" Aperture (HP-4) Recessed
Finelite, Inc. • 30500 Whipple Road • Union City • CA 94587-1530 • P: 510-441-1100 • F: 510-441-1510 • www.finelite.com. © 2021 FINELITE, INC. ALL RIGHTS RESERVED. V8 CTK0236. 04/21. Due to continuing product improvements, Finelite reserves the right to change specifications without notice. Visit www.finelite.com for the most current data.
4"
4"
4"3/16"
4"
5"
4"
1" 4"3/8"
4"
Industry Best
LED Warranty
1100Year1100Year
Industry Best1100
Year1100Year
LED Warranty
Fine TUNE
GENERATION 1 ®
High Performance 4" Aperture is a patented, linear LED luminaire family. HP-4 delivers excellent performance using an advanced optical design and mid-power LEDs. Achieving 90% of initial light output at 100,000+ hours and backed by a 10-year performance-based warranty on all standard components.
This product is enrolled in the International Living Future Institute (ILFI) Declare 2.0 Program and is third-party verified with options achieving Red List Approved and Declared status.
Flush Downlight Diffuser(standard)
Recessed
Flat Diffuser with 1" Regressed
Regressed
Recessed Flush Diffuser - Hard Ceiling Shown
Kicker (standard)
Wall WashRecessed
CROSS SECTIONS
Wall Mount(WM)
Downlight Spread Optic(DSO)
ALSO AVAILABLE INOPTIC OPTIONS
Note: see page 6 for all aesthetic options
Pendant(D, ID, I)
Standard Downlight Optic(F)
Surface Mount(SM)
Page 2
Page 2
Submitted by: Date:
Type: Project:
Ordering Info:
Protected by one or more US Patents: 8915613; D702,391; D702,390; D700,732
High Performance 4" Aperture (HP-4) Recessed
Finelite, Inc. • 30500 Whipple Road • Union City • CA 94587-1530 • P: 510-441-1100 • F: 510-441-1510 • www.finelite.com. © 2021 FINELITE, INC. ALL RIGHTS RESERVED. V8 CTK0236. 04/21. Due to continuing product improvements, Finelite reserves the right to change specifications without notice. Visit www.finelite.com for the most current data.
ELECTRICAL OPTIONS MOUNTING OPTIONS
Driver Selection Ceiling Hardware Type
0-10V Driver Options FC-10% - 0-10V 10% 4 (standard)FC-1% - 0-10V 1% 4
OSR-10% - Osram OTi, 0-10V 10% 4
OSR-1% - Osram OTi, 0-10V 1% 4
ELD-10V-0% - EldoLED SOLOdrive, 0-10V 0.1%OSR-10V-TW - Osram OTi, 0-10V 10% (Tunable White) 4
DALI Driver Options FC-DALI-1% - DALI 1%OSR-DALI-1% - Osram Dexal, 1%ELD-DALI-0% - EldoLED SOLOdrive, 0.1%ELD-DALI-TW - EldoLED DUALdrive LightShape, 0.1%
(Tunable White)
DMX Driver Options FIN-DMX - Finelite DMX 1% (Tunable White - FineTune Controls Only) 5 ELD-DMX - EldoLED POWERdrive, 0.1%ELD-DMX-TW - EldoLED POWERdrive, 0.1% (Tunable White) Lutron Driver Options LUT-ES1 - Lutron, Ecosystem 1%LUT-2W - Lutron, 2-wire (120V only) 1%LUT-TW - Lutron T-Series, EcoSystem 0.1% (Tunable White)
See Page 3 for additional driver options and details
C1 - 1" T-BarC1T - 1" TegularC2 - 9/16" T-BarC2T - 9/16" TegularC3 - Screw SlotC3F - Flush Screw SlotSF - Spackle FlangeVF - Visible FlangeTZ6 - Tech Zone 6" __________
(C1, C2, C2T, C3, C3F)
BODY TYPE OUTPUT and LED TYPE
Platform SeriesName
LuminaireType
LuminaireDistribution
Total Length of Run Downlight Output (Flush) LED CRI/CCT
HP - High Performance
4 R - RecessedR RG - Recessed
Regressed (Wall Wash not available)
D - DirectWW-D - Wall Wash
Direct
______________________
Minimum 2' section length. Increments accurate to 1/16" (±1/32"), standard. 12' maximum section length.
S - Standard (381 lm/ft)B - Boosted (479 lm/ft)H - High (725 lm/ft)V - Very High (932 lm/ft)TL - Tailored:________lm/ft*
830 - 80 CRI, 3000K835 - 80 CRI, 3500K840 - 80 CRI, 4000K930 - 90 CRI, 3000K935 - 90 CRI, 3500K940 - 90 CRI, 4000K8TW - 80 CRI, Tunable White9TW - 90 CRI, Tunable White
MECHANICAL/OPTICAL OPTIONS ELECTRICAL OPTIONS
Downlight Reflector System Voltage Circuiting 3
F - Flush (standard)DL - 1" Drop Down LensRG-D - Flat Diffuser with 1" Regress 1
RG-WCB - White Cross Blade Baffle 1
RG-LHE - Hollowed Ellipse Louver 1
RG-LHC - Hex Louver 1
DSO - Downlight Spread Optic 2
K - Kicker for Wall Wash onlyFO - Fully Open for Wall Wash only
96LG - 96 Low Gloss WhiteSSA - Semi-Specular Aluminum for Wall Wash only
120 - 120 Voltage277 - 277 Voltage347 - 347 Voltage
SC - Single Circuit*
* Battery, Night Light, and Emergency to Generator circuits are in addition to the normal luminaire circuit(s)
OTHER OPTIONS
Endcap Style Finish Emergency Style (Optional) Integrated Sensor (Optional) Special Options (Optional)
FE - Flat Endcap (standard) SW - Signal White (standard)FB - Finelite Black 6
SA - Satin Aluminum 6
#### - RAL Color Code 6 ____________
FAC CHO - Factory Choice Battery Back-upEM/GEN - Emergency to Generator NL - Night LightBSL722 - Bodine Battery Back upBSL310LP - Bodine Battery Back up Low ProfileGTD - Generator Transfer Device
OBO - Occupancy 7
OBD - Daylight 7
OBE - Enlighted 8
REE - Remote Enlighted 9
CP - Chicago PlenumFLX - Flex WhipRLA - Red List ApprovedRLD - Declared
1 Recessed Regressed only2 Not available with Regressed or Curves3 Contact factory for switching options4 Add DTO to gain "Dim to Off" functionality (FC-10% - DTO)5 B & V outputs only
6 20 business days lead time for color7 Not available with Wall Wash8 Enlighted components installed by Finelite, provided by others9 Enlighted for Wall Wash fixtures. Enlighted Control Unit &
Sensor Cable installed for Remote mounting sensor.
* Specify lm/ft of outputs between Standard (S) and Very High (V). Consult factory for tailored lumen output outside of this range.
Page 3
Page 3
Submitted by: Date:
Type: Project:
Ordering Info:
Protected by one or more US Patents: 8915613; D702,391; D702,390; D700,732
High Performance 4" Aperture (HP-4) Recessed
Finelite, Inc. • 30500 Whipple Road • Union City • CA 94587-1530 • P: 510-441-1100 • F: 510-441-1510 • www.finelite.com. © 2021 FINELITE, INC. ALL RIGHTS RESERVED. V8 CTK0236. 04/21. Due to continuing product improvements, Finelite reserves the right to change specifications without notice. Visit www.finelite.com for the most current data.
SUPPLEMENTARY DRIVER PAGE
0-10V Driver OptionsFC-10% Factory Choice, 0-10V 10% Dimming (Linear)
FC-10%-DTO Factory Choice, 0-10V 10% Dimming, Dim-to-Off (Linear)
FC-1% Factory Choice, 0-10V 1% Dimming (Linear)
FC-1%-DTO Factory Choice, 0-10V 1% Dimming, Dim-to-Off (Linear)
ELD-10V-0% EldoLED SOLOdrive, 0-10V 0.1% Dimming (Linear)
ELD-10V-1% EldoLED ECOdrive, 0-10V 1% Dimming (Linear)
OSR-10V-TW Osram OTi, 0-10V 10% Dimming, Tunable White (Linear)
OSR-10V-TW-DTO Osram OTi, 0-10V 10% Dimming, Dim-to-Off, Tunable White (Linear)
OSR-10% Osram OTi, 0-10V 10% Dimming (Linear)
OSR-10%-DTO Osram OTi, 0-10V 10% Dimming, Dim-to-Off (Linear)
OSR-1% Osram OTi, 0-10V 1% Dimming (Linear)
OSR-1%-DTO Osram OTi, 0-10V 1% Dimming, Dim-to-Off (Linear)
DALI Driver OptionsFC-DALI-1% Factory Choice, DALI 1% Dimming (Logarithmic)
OSR-DALI-1% Osram Dexal, DALI 1% Dimming (Logarithmic)
ELD-DALI-0% EldoLED SOLOdrive, DALI 0.1% Dimming (Logarithmic)
ELD-DALI-1% EldoLED ECOdrive, DALI 1% Dimming (Logarithmic)
ELD-DALI-TW EldoLED DUALdrive Light Shape, DALI 0.1% Dimming, Tunable White (Logarithmic Dimming, Linear CCT Control)
DMX Driver OptionsFIN-DMX Finelite, DMX 1% Dimming, Tunable White - FineTUNE Controls Only (Linear)
ELD-DMX EldoLED POWERdrive, DMX 0.1% Dimming (8 Bit, 1CH) (Linear)
ELD-DMX-16 EldoLED POWERdrive, DMX 0.1% Dimming (16 Bit, 2CH) (Linear)
ELD-DMX-TW EldoLED POWERdrive, DMX 0.1% Dimming, Tunable White (8 Bit, 2CH - CH1 Warm / CH2 Cool) (Linear)
ELD-DMX-TW16 EldoLED POWERdrive, DMX 0.1% Dimming, Tunable White (16 Bit, 4CH - CH1, 2 Warm / CH3, 4 Cool) (Linear)
Lutron Driver OptionsLUT-ES1 Lutron, Ecosystem 1% Dimming
LUT-2W Lutron, 2-wire (120V only) 1% Dimming
LUT-TW Lutron T-Series, EcoSystem 0.1% Dimming, Tunable White
Page 4
Page 4
Submitted by: Date:
Type: Project:
Ordering Info:
Protected by one or more US Patents: 8915613; D702,391; D702,390; D700,732
High Performance 4" Aperture (HP-4) Recessed
Finelite, Inc. • 30500 Whipple Road • Union City • CA 94587-1530 • P: 510-441-1100 • F: 510-441-1510 • www.finelite.com. © 2021 FINELITE, INC. ALL RIGHTS RESERVED. V8 CTK0236. 04/21. Due to continuing product improvements, Finelite reserves the right to change specifications without notice. Visit www.finelite.com for the most current data.
SPECIFICATIONSBODY TYPECONSTRUCTION: Precision-cut 6061-T6 extruded aluminum body. Internal joiner system, plug-together wiring, standard.
LENGTHS: Any length, 2' minimum, in increments down to 1/16" (±1/32"). 12' maximum section length. Hollowed Ellipse Louver (LHE), Hex Louver (LHC), and White Cross Blade Baffle (WCB) are available in 1' increments.
MITERED CORNERS 1 : Illuminated corners of greater than 60° and less than 180° in a single plane, available with Flush Diffuser, Bottom Glow Diffuser, 1" Drop Down Lens, Regressed Diffuser, White Cross Blade Baffle2 or Wall Wash. Corners not available with Wall Wash (WW-D), Hollowed Ellipse Louver (LHE) or Hex Louver (LHC). Consult factory for tailored lighting options.
OUTPUT AND LED TYPELIGHT OUTPUT: Four lumen packages available, Standard (S), Boosted Standard (B), High (H), and Very High (V). For lengths 3' and greater, the uplight and downlight can be specified with different lumen packages and dual controls. For Tailored Outputs outside of range from Standard (S) to Very High (V), consult factory. Light engines are replaceable.
MECHANICAL/OPTICAL OPTIONSDOWNLIGHT OPTION : 12' maximum diffuser length. Flush frost white snap-in diffuser standard, 73% transmissive, 99% diffusion. Internal secondary diffusers at corners ensure visually seamless, uniform, continuous illumination. Available with Flush (F), 1" Drop Down Lens (DL), White Cross Blade Baffle (WCB) 3, 4, Ellipse Louver (LHE) 3, Hex Louver (LHC) 3, Downlight Spread Optic (DSO), and Regressed downlight diffusers (RG) 3. 1" Drop Down Lens made of acrylic. Available with a solid endcap or an endcap with a diffuse filler to continue the luminous aesthetic. Downlight Spread Optic is an extruded lens with a subtle ribbed appearance providing a batwing distribution for improved optical performance. Consult factory for more tailored lumen outputs.
LUMEN MAINTENANCE: 90% of initial light output (L90) at 100,000+ hours; 70% of initial light output (L70) at 200,000+ hours.
REFLECTORS: Die-formed 20-gauge cold-rolled steel reflectors finished in 96LG High Reflectance white powder coat paint. The standard Semi-Specular Aluminum (SSA) Kicker (K) reflector delivers light high on the vertical surface. The Kicker reflector can be easily removed for open distribution (FO).
ELECTRICAL OPTIONSSTATIC WHITE FEED: Standard with one 18-gauge/5-conductor
single-circuit feed wire controlling uplight and downlight together (power and dimming). Specify dual feed wires for independent control of uplight and downlight. 14-gauge feed wire used when luminaire current exceeds 5 amps.
TUNABLE WHITE FEED: Standard with one 18-gauge/5-conductor single-circuit feed. 14-gauge feed used when luminaire current exceeds 5 amps. DMX and power feed at same location (standard). DMX feeds cannot be cut or spliced. DMX feeds should be ordered based on fixed lengths.
STATIC WHITE DRIVER: Replaceable 120V, 277V, and 347V constant current reduction dimming driver standard. Can be wired dimming or non-dimming. 0-10V dimming controls with a range of 10%- 100% standard. Dimming to 1% available. Separate dimming for uplight and downlight available. Driver is fully accessible from below the ceiling.- Power Factor: ≥ 0.9- Total Harmonic Distortion (THD): <20%- Expected driver lifetime: 100,000 hours
LUTRON DRIVER OPTIONS: - LUT-ES1 (LDE1) - (Hi-lume 1% EcoSystem with Soft-On, Fade-to- Black dimming (LDE1 series))- LUT-2W (LTEA2W) - (Hi-lume 1% 2-wire, 120V forward phase dimming (LTEA series)).
TUNABLE WHITE DRIVER: Replaceable LED driver. Driver is accessible from below the ceiling. 120V, 277V, and 347V. - Power factor: ≥0.90- Total Harmonic Distortion (THD): <20%- Dimming Range: 100%-10% - Expected driver lifetime: 100,000 hours- FineTune DMX: 1%
LUTRON TUNABLE WHITE DRIVER OPTION:LUT-TW (0.1% T-Series 2-Channel Digital Tunable White (PSQ Series)).
MOUNTING OPTIONSHANGING HARDWARE: - Recessed T-Bar: Standard bracket design works with most lay-in
ceiling types. Brackets secure luminaire to the ceiling grid from above. Tie-in T-Bar brackets connect the luminaire to the T-Bar for securing to structure. Consult local codes for tie-wire recommendations.
- Recessed Spackle Flange: Drywall surfaces (walls or ceilings): 1/4" - 20 stud and nut (provided by others). Mounted with three equidistant suspension points.
1 Not available with Wall Wash2 White Cross Blade (WCB) baffles not available with custom angles. Available in 90 degrees only3 Recessed-Regressed only4 White Cross Blade Baffle (WCB) currently not advisable for drywall
Continued
Page 5
Page 5
Submitted by: Date:
Type: Project:
Ordering Info:
Protected by one or more US Patents: 8915613; D702,391; D702,390; D700,732
High Performance 4" Aperture (HP-4) Recessed
Finelite, Inc. • 30500 Whipple Road • Union City • CA 94587-1530 • P: 510-441-1100 • F: 510-441-1510 • www.finelite.com. © 2021 FINELITE, INC. ALL RIGHTS RESERVED. V8 CTK0236. 04/21. Due to continuing product improvements, Finelite reserves the right to change specifications without notice. Visit www.finelite.com for the most current data.
Backup BatteryFactory Choice Bodine BSL310LP Bodine BSL722
HP4-R-D
Min. Housing Length 8' 4' 4'*
EM Lumen Output 1854 1102 1854
EM Section Illum. 2' 2' or 4' 2'
HP4-R-WW-D
Min. Housing Length 8'* 4'* 4'*
EM Lumen Output 2000 1189 2000
EM Section Illum. 4' 4' 4'
* Minimum fixture housing length for battery pack approved without sensor
TUNABLE WHITE DMX HANGING HARDWARE: For grid ceiling applications the dual GridBox™ mounting is supplied (standard). For hard ceiling applications the ceiling mounting box is supplied (standard). DMX feeds cannot be cut or spliced. DMX feeds should be ordered based on fixed lengths. Available DMX pendant feed lengths are 5' (standard), 12', and 30'.
TUNABLE WHITE DMX INTERCONNECTION CABLES: Luminaires are pre-wired with plug-and-play interconnection cables to support easy plug-together joining of fixture runs. If a non-FineTune DMX system has been specified, a DMX to RJ45 converter is provided.
OTHER OPTIONSENDCAPS: Flat endcaps (FE) at each end of run add 1/16" to each end of luminaire. Drop Down Lens Illuminated Endcap (DE) includes diffuse element to continue luminance of drop lens.
EMERGENCY STYLE: Optional emergency to generator/inverter wiring, internal generator transfer switch, nightlight wiring, step-dimming driver, backup battery.
TUNABLE WHITE ELECTRICAL OPTIONS 5: - TW Driver Options 0-10V: EM/GEN, GTD or Battery Back up- FineTune DMX: EM/GEN or Battery Back up- DMX: Battery Back up- DALI: EM/GEN, GTD or Battery Back up- LUTRON: EM/GEN, GTD or Battery Back up
INTEGRATED SENSORS: Integrated PIR (Passive Infrared) occupancy or daylight sensors available with Flush and Bottom Glow downlight diffusers. Refer to Occupancy Sensor, Daylight Sensor, and Enlighted Sensor tech sheets for more info.
FINISHES: Finelite Signal White (SW) powder coat, Finelite Black (RAL 9005) with semi gloss fine texture (FB) 6, and Satin Aluminum (SA) 6 are standard. Optional Adder: 185 RAL colors 6 are available.
LABELS: Luminaire and electrical components are ETL-listed conforming to UL 1598 in the U.S.A. and CAN/CSA C22.2 No. 250.0 in Canada. In accordance with NEC Code 410.130 (G), this luminaire contains an internal driver disconnect. UL 924 and UL 2108 - PoE options available on request.These fixtures are rated for Damp Location. IC Rated. Finelite products use electronic components that are RoHS compliant, and the mechanical components of the luminaire have been verified to not knowingly contain any restricted substances listed per RoHS Directive 2015/863. Consult factory for tailored lighting options. Finelite makes the specification process easy when putting healthier products on your projects. Simply add – RLA (Red List Approved) or – RLD (Declared Label) to your part number.
WEIGHT 7: R - 2.8 lb/ft; WW-R - 2.9 lb/ft
DLC QUALIFIED: Configurations of this product are listed on the DLC Qualified Products List (QPL). www.designlights.org/search
WARRANTY: 10-year performance-based warranty on all standard components. Optional accessories such as emergency battery packs are covered by their individual manufacturer warranties.
SPECIFICATIONS
5 Consult Finelite for Generator Transfer Device and Battery Backup fit 6 20 business days lead time for color7 Excludes Battery Backup and Generator Transfer Device weight
Page 6
Page 6
Submitted by: Date:
Type: Project:
Ordering Info:
Protected by one or more US Patents: 8915613; D702,391; D702,390; D700,732
High Performance 4" Aperture (HP-4) Recessed
Finelite, Inc. • 30500 Whipple Road • Union City • CA 94587-1530 • P: 510-441-1100 • F: 510-441-1510 • www.finelite.com. © 2021 FINELITE, INC. ALL RIGHTS RESERVED. V8 CTK0236. 04/21. Due to continuing product improvements, Finelite reserves the right to change specifications without notice. Visit www.finelite.com for the most current data.
AESTHETIC OPTIONS
1 Regressed only
Flush Diffuser (F) Downlight Spread Optic (DSO)Externally flush
1" Drop Down Lens (DL) Flat Diffuser with 1" Regressed (RG-D)
White Cross Blade Baffle 1 (RG-WCB) Hollowed Ellipse Louver 1 (RG-LHE)Hex Louver 1 (RG-LHC) Kicker (K) - Wall Wash only
Page 7
Page 7
Submitted by: Date:
Type: Project:
Ordering Info:
Protected by one or more US Patents: 8915613; D702,391; D702,390; D700,732
High Performance 4" Aperture (HP-4) Recessed
Finelite, Inc. • 30500 Whipple Road • Union City • CA 94587-1530 • P: 510-441-1100 • F: 510-441-1510 • www.finelite.com. © 2021 FINELITE, INC. ALL RIGHTS RESERVED. V8 CTK0236. 04/21. Due to continuing product improvements, Finelite reserves the right to change specifications without notice. Visit www.finelite.com for the most current data.
6"
4"
6"
5"
6"
4"
6"
5"
HARD CEILING MOUNTING OPTIONS
GRID LENGTH DETAIL - 4' EXAMPLE
HARD CEILING LENGTH DETAIL - 4' EXAMPLE
T-BAR INSTALLATION
Two mounting options: threaded rod and screw mounting options. Mounting locations are located on each end of the luminaire. Mounting location is 6" away from each end of luminaire.
Threaded Rod Option Mounting Location for Securing to Structure
Recessed
RegressedScrew Mount Option
HP-4 R for T-Bar installations comes standard with a splice plate at the end of the luminaire. Mounting brackets (supplied) secure the luminaire to T-Bar and provide support to structure location. All even foot length (2, 4, 6, ...) luminaire runs are reduced in length by an appropriate amount to fit within typical 2x2 and 2x4 T-Bar grid systems. For uncommon T-Bar systems please consult factory.
Recessed Flange Housing4 ft.
IndependentBody & Diffuser = 46-7/8"
(without Endcap)
48" Center to Center 48" Center to Center
Endcap forRecessed
T-Bar EndFlange
Recessed Flange Housing4 ft.
IndependentBody & Diffuser = 46-7/8"
(without Endcap)
Endcap forRecessed
T-Bar EndFlange
48" Center to Center
Recessed Flange Housing4 ft.
IndependentBody & Diffuser = 46-7/8"
(without Endcap)
Endcap forRecessed
T-Bar EndFlange
48"
Ceiling Cutout
RecessedFlange Housing
4 ft.
IndependentBody & Diffuser = 48"
(without Endcap)
HardCeiling
HardCeiling
1" T-Bar
9/16" Screw Slot
9/16" T-Bar
Spackle Flange Visible Flange
48"
Ceiling Cutout
RecessedFlange Housing
4 ft.
IndependentBody & Diffuser = 48"
(without Endcap)
HardCeiling
HardCeiling
5/16"5/16"7/16"7/16"
Recessed Flange Housing4 ft.
IndependentBody & Diffuser = 46-7/8"
(without Endcap)
48" Center to Center 48" Center to Center
Endcap forRecessed
T-Bar EndFlange
Recessed Flange Housing4 ft.
IndependentBody & Diffuser = 46-7/8"
(without Endcap)
Endcap forRecessed
T-Bar EndFlange
48" Center to Center
Recessed Flange Housing4 ft.
IndependentBody & Diffuser = 46-7/8"
(without Endcap)
Endcap forRecessed
T-Bar EndFlange
48"
Ceiling Cutout
RecessedFlange Housing
4 ft.
IndependentBody & Diffuser = 48"
(without Endcap)
HardCeiling
HardCeiling
1" T-Bar
9/16" Screw Slot
9/16" T-Bar
Spackle Flange Visible Flange
48"
Ceiling Cutout
RecessedFlange Housing
4 ft.
IndependentBody & Diffuser = 48"
(without Endcap)
HardCeiling
HardCeiling
5/16"5/16"7/16"7/16"
Page 8
Page 8
Submitted by: Date:
Type: Project:
Ordering Info:
Protected by one or more US Patents: 8915613; D702,391; D702,390; D700,732
High Performance 4" Aperture (HP-4) Recessed
Finelite, Inc. • 30500 Whipple Road • Union City • CA 94587-1530 • P: 510-441-1100 • F: 510-441-1510 • www.finelite.com. © 2021 FINELITE, INC. ALL RIGHTS RESERVED. V8 CTK0236. 04/21. Due to continuing product improvements, Finelite reserves the right to change specifications without notice. Visit www.finelite.com for the most current data.
RECESSED MOUNTING TYPES - T-BAR
RECESSED MOUNTING TYPES - CUTOUT DIMENSIONS
HOUSING
Rough-In Dimensions
4"5"
4"
4"5"
4"
4"4-1/4"
4"
4"4-5/8"
4"
4"4-5/8"
4"
4"4-5/8"
4"
4"4-5/8"
4-5/16"
HP-41" T-Bar (C1)
HP-49/16" T-Bar (C2)
HP-4STANDARD SCREW SLOT (C3)
HP-4FLUSH SCREW SLOT (C3F)
HP-41" TEGULAR (C1T)
HP-4VISIBLE FLANGE (VF)
HP-49/16" TEGULAR (C2T)
HP-4TECH ZONE 6" (TZ6)
1" T-Bar (C1)
4"6"
4"
HP-4TECH ZONE 6" (TZ6)
9/16" T-Bar (C2)
4"4-7/8"
4"
HP-4SPACKLE FLANGE (SF)
4"6"
4-5/16"
HP-4TECH ZONE 6" (TZ6)
STANDARD SCREW SLOT (C3)
HP-4TECH ZONE 6" (TZ6)
FLUSH SCREW SLOT (C3F)
4"6"
4"
4"6"
4"
HP-4TECH ZONE 6" (TZ6)9/16" TEGULAR (C2T)
4"6"
4"
(W) Rough-In Width
(W) Rough-In Width
(W) Rough-In Width (W) Rough-In Width (W) Rough-In Width (W) Rough-In Width (W) Rough-In Width
(W) Rough-In Width (W) Rough-In Width (W) Rough-In Width
(W) Rough-In Width (W) Rough-In Width (W) Rough-In Width
4"5"
4"
4"5"
4"
4"4-1/4"
4"
4"4-5/8"
4"
4"4-5/8"
4"
4"4-5/8"
4"
4"4-5/8"
4-5/16"
HP-41" T-Bar (C1)
HP-49/16" T-Bar (C2)
HP-4STANDARD SCREW SLOT (C3)
HP-4FLUSH SCREW SLOT (C3F)
HP-41" TEGULAR (C1T)
HP-4VISIBLE FLANGE (VF)
HP-49/16" TEGULAR (C2T)
HP-4TECH ZONE 6" (TZ6)
1" T-Bar (C1)
4"6"
4"
HP-4TECH ZONE 6" (TZ6)
9/16" T-Bar (C2)
4"4-7/8"
4"
HP-4SPACKLE FLANGE (SF)
4"6"
4-5/16"
HP-4TECH ZONE 6" (TZ6)
STANDARD SCREW SLOT (C3)
HP-4TECH ZONE 6" (TZ6)
FLUSH SCREW SLOT (C3F)
4"6"
4"
4"6"
4"
HP-4TECH ZONE 6" (TZ6)9/16" TEGULAR (C2T)
4"6"
4"
(W) Rough-In Width
(W) Rough-In Width
(W) Rough-In Width (W) Rough-In Width (W) Rough-In Width (W) Rough-In Width (W) Rough-In Width
(W) Rough-In Width (W) Rough-In Width (W) Rough-In Width
(W) Rough-In Width (W) Rough-In Width (W) Rough-In Width
4"5"
4"
4"5"
4"
4"4-1/4"
4"
4"4-5/8"
4"
4"4-5/8"
4"
4"4-5/8"
4"
4"4-5/8"
4-5/16"
HP-41" T-Bar (C1)
HP-49/16" T-Bar (C2)
HP-4STANDARD SCREW SLOT (C3)
HP-4FLUSH SCREW SLOT (C3F)
HP-41" TEGULAR (C1T)
HP-4VISIBLE FLANGE (VF)
HP-49/16" TEGULAR (C2T)
HP-4TECH ZONE 6" (TZ6)
1" T-Bar (C1)
4"6"
4"
HP-4TECH ZONE 6" (TZ6)
9/16" T-Bar (C2)
4"4-7/8"
4"
HP-4SPACKLE FLANGE (SF)
4"6"
4-5/16"
HP-4TECH ZONE 6" (TZ6)
STANDARD SCREW SLOT (C3)
HP-4TECH ZONE 6" (TZ6)
FLUSH SCREW SLOT (C3F)
4"6"
4"
4"6"
4"
HP-4TECH ZONE 6" (TZ6)9/16" TEGULAR (C2T)
4"6"
4"
(W) Rough-In Width
(W) Rough-In Width
(W) Rough-In Width (W) Rough-In Width (W) Rough-In Width (W) Rough-In Width (W) Rough-In Width
(W) Rough-In Width (W) Rough-In Width (W) Rough-In Width
(W) Rough-In Width (W) Rough-In Width (W) Rough-In Width
4"5"
4"
4"5"
4"
4"4-1/4"
4"
4"4-5/8"
4"
4"4-5/8"
4"
4"4-5/8"
4"
4"4-5/8"
4-5/16"
HP-41" T-Bar (C1)
HP-49/16" T-Bar (C2)
HP-4STANDARD SCREW SLOT (C3)
HP-4FLUSH SCREW SLOT (C3F)
HP-41" TEGULAR (C1T)
HP-4VISIBLE FLANGE (VF)
HP-49/16" TEGULAR (C2T)
HP-4TECH ZONE 6" (TZ6)
1" T-Bar (C1)
4"6"
4"
HP-4TECH ZONE 6" (TZ6)
9/16" T-Bar (C2)
4"4-7/8"
4"
HP-4SPACKLE FLANGE (SF)
4"6"
4-5/16"
HP-4TECH ZONE 6" (TZ6)
STANDARD SCREW SLOT (C3)
HP-4TECH ZONE 6" (TZ6)
FLUSH SCREW SLOT (C3F)
4"6"
4"
4"6"
4"
HP-4TECH ZONE 6" (TZ6)9/16" TEGULAR (C2T)
4"6"
4"
(W) Rough-In Width
(W) Rough-In Width
(W) Rough-In Width (W) Rough-In Width (W) Rough-In Width (W) Rough-In Width (W) Rough-In Width
(W) Rough-In Width (W) Rough-In Width (W) Rough-In Width
(W) Rough-In Width (W) Rough-In Width (W) Rough-In Width
4"5"
4"
4"5"
4"
4"4-1/4"
4"
4"4-5/8"
4"
4"4-5/8"
4"
4"4-5/8"
4"
4"4-5/8"
4-5/16"
HP-41" T-Bar (C1)
HP-49/16" T-Bar (C2)
HP-4STANDARD SCREW SLOT (C3)
HP-4FLUSH SCREW SLOT (C3F)
HP-41" TEGULAR (C1T)
HP-4VISIBLE FLANGE (VF)
HP-49/16" TEGULAR (C2T)
HP-4TECH ZONE 6" (TZ6)
1" T-Bar (C1)
4"6"
4"
HP-4TECH ZONE 6" (TZ6)
9/16" T-Bar (C2)
4"4-7/8"
4"
HP-4SPACKLE FLANGE (SF)
4"6"
4-5/16"
HP-4TECH ZONE 6" (TZ6)
STANDARD SCREW SLOT (C3)
HP-4TECH ZONE 6" (TZ6)
FLUSH SCREW SLOT (C3F)
4"6"
4"
4"6"
4"
HP-4TECH ZONE 6" (TZ6)9/16" TEGULAR (C2T)
4"6"
4"
(W) Rough-In Width
(W) Rough-In Width
(W) Rough-In Width (W) Rough-In Width (W) Rough-In Width (W) Rough-In Width (W) Rough-In Width
(W) Rough-In Width (W) Rough-In Width (W) Rough-In Width
(W) Rough-In Width (W) Rough-In Width (W) Rough-In Width
4"5"
4"
4"5"
4"
4"4-1/4"
4"
4"4-5/8"
4"
4"4-5/8"
4"
4"4-5/8"
4"
4"4-5/8"
4-5/16"
HP-41" T-Bar (C1)
HP-49/16" T-Bar (C2)
HP-4STANDARD SCREW SLOT (C3)
HP-4FLUSH SCREW SLOT (C3F)
HP-41" TEGULAR (C1T)
HP-4VISIBLE FLANGE (VF)
HP-49/16" TEGULAR (C2T)
HP-4TECH ZONE 6" (TZ6)
1" T-Bar (C1)
4"6"
4"
HP-4TECH ZONE 6" (TZ6)
9/16" T-Bar (C2)
4"4-7/8"
4"
HP-4SPACKLE FLANGE (SF)
4"6"
4-5/16"
HP-4TECH ZONE 6" (TZ6)
STANDARD SCREW SLOT (C3)
HP-4TECH ZONE 6" (TZ6)
FLUSH SCREW SLOT (C3F)
4"6"
4"
4"6"
4"
HP-4TECH ZONE 6" (TZ6)9/16" TEGULAR (C2T)
4"6"
4"
(W) Rough-In Width
(W) Rough-In Width
(W) Rough-In Width (W) Rough-In Width (W) Rough-In Width (W) Rough-In Width (W) Rough-In Width
(W) Rough-In Width (W) Rough-In Width (W) Rough-In Width
(W) Rough-In Width (W) Rough-In Width (W) Rough-In Width
4"5"
4"
4"5"
4"
4"4-1/4"
4"
4"4-5/8"
4"
4"4-5/8"
4"
4"4-5/8"
4"
4"4-5/8"
4-5/16"
HP-41" T-Bar (C1)
HP-49/16" T-Bar (C2)
HP-4STANDARD SCREW SLOT (C3)
HP-4FLUSH SCREW SLOT (C3F)
HP-41" TEGULAR (C1T)
HP-4VISIBLE FLANGE (VF)
HP-49/16" TEGULAR (C2T)
HP-4TECH ZONE 6" (TZ6)
1" T-Bar (C1)
4"6"
4"
HP-4TECH ZONE 6" (TZ6)
9/16" T-Bar (C2)
4"4-7/8"
4"
HP-4SPACKLE FLANGE (SF)
4"6"
4-5/16"
HP-4TECH ZONE 6" (TZ6)
STANDARD SCREW SLOT (C3)
HP-4TECH ZONE 6" (TZ6)
FLUSH SCREW SLOT (C3F)
4"6"
4"
4"6"
4"
HP-4TECH ZONE 6" (TZ6)9/16" TEGULAR (C2T)
4"6"
4"
(W) Rough-In Width
(W) Rough-In Width
(W) Rough-In Width (W) Rough-In Width (W) Rough-In Width (W) Rough-In Width (W) Rough-In Width
(W) Rough-In Width (W) Rough-In Width (W) Rough-In Width
(W) Rough-In Width (W) Rough-In Width (W) Rough-In Width
4"5"
4"
4"5"
4"
4"4-1/4"
4"
4"4-5/8"
4"
4"4-5/8"
4"
4"4-5/8"
4"
4"4-5/8"
4-5/16"
HP-41" T-Bar (C1)
HP-49/16" T-Bar (C2)
HP-4STANDARD SCREW SLOT (C3)
HP-4FLUSH SCREW SLOT (C3F)
HP-41" TEGULAR (C1T)
HP-4VISIBLE FLANGE (VF)
HP-49/16" TEGULAR (C2T)
HP-4TECH ZONE 6" (TZ6)
1" T-Bar (C1)
4"6"
4"
HP-4TECH ZONE 6" (TZ6)
9/16" T-Bar (C2)
4"4-7/8"
4"
HP-4SPACKLE FLANGE (SF)
4"6"
4-5/16"
HP-4TECH ZONE 6" (TZ6)
STANDARD SCREW SLOT (C3)
HP-4TECH ZONE 6" (TZ6)
FLUSH SCREW SLOT (C3F)
4"6"
4"
4"6"
4"
HP-4TECH ZONE 6" (TZ6)9/16" TEGULAR (C2T)
4"6"
4"
(W) Rough-In Width
(W) Rough-In Width
(W) Rough-In Width (W) Rough-In Width (W) Rough-In Width (W) Rough-In Width (W) Rough-In Width
(W) Rough-In Width (W) Rough-In Width (W) Rough-In Width
(W) Rough-In Width (W) Rough-In Width (W) Rough-In Width
4"5"
4"
4"5"
4"
4"4-1/4"
4"
4"4-5/8"
4"
4"4-5/8"
4"
4"4-5/8"
4"
4"4-5/8"
4-5/16"
HP-41" T-Bar (C1)
HP-49/16" T-Bar (C2)
HP-4STANDARD SCREW SLOT (C3)
HP-4FLUSH SCREW SLOT (C3F)
HP-41" TEGULAR (C1T)
HP-4VISIBLE FLANGE (VF)
HP-49/16" TEGULAR (C2T)
HP-4TECH ZONE 6" (TZ6)
1" T-Bar (C1)
4"6"
4"
HP-4TECH ZONE 6" (TZ6)
9/16" T-Bar (C2)
4"4-7/8"
4"
HP-4SPACKLE FLANGE (SF)
4"6"
4-5/16"
HP-4TECH ZONE 6" (TZ6)
STANDARD SCREW SLOT (C3)
HP-4TECH ZONE 6" (TZ6)
FLUSH SCREW SLOT (C3F)
4"6"
4"
4"6"
4"
HP-4TECH ZONE 6" (TZ6)9/16" TEGULAR (C2T)
4"6"
4"
(W) Rough-In Width
(W) Rough-In Width
(W) Rough-In Width (W) Rough-In Width (W) Rough-In Width (W) Rough-In Width (W) Rough-In Width
(W) Rough-In Width (W) Rough-In Width (W) Rough-In Width
(W) Rough-In Width (W) Rough-In Width (W) Rough-In Width
4"5"
4"
4"5"
4"
4"4-1/4"
4"
4"4-5/8"
4"
4"4-5/8"
4"
4"4-5/8"
4"
4"4-5/8"
4-5/16"
HP-41" T-Bar (C1)
HP-49/16" T-Bar (C2)
HP-4STANDARD SCREW SLOT (C3)
HP-4FLUSH SCREW SLOT (C3F)
HP-41" TEGULAR (C1T)
HP-4VISIBLE FLANGE (VF)
HP-49/16" TEGULAR (C2T)
HP-4TECH ZONE 6" (TZ6)
1" T-Bar (C1)
4"6"
4"
HP-4TECH ZONE 6" (TZ6)
9/16" T-Bar (C2)
4"4-7/8"
4"
HP-4SPACKLE FLANGE (SF)
4"6"
4-5/16"
HP-4TECH ZONE 6" (TZ6)
STANDARD SCREW SLOT (C3)
HP-4TECH ZONE 6" (TZ6)
FLUSH SCREW SLOT (C3F)
4"6"
4"
4"6"
4"
HP-4TECH ZONE 6" (TZ6)9/16" TEGULAR (C2T)
4"6"
4"
(W) Rough-In Width
(W) Rough-In Width
(W) Rough-In Width (W) Rough-In Width (W) Rough-In Width (W) Rough-In Width (W) Rough-In Width
(W) Rough-In Width (W) Rough-In Width (W) Rough-In Width
(W) Rough-In Width (W) Rough-In Width (W) Rough-In Width
4"5"
4"
4"5"
4"
4"4-1/4"
4"
4"4-5/8"
4"
4"4-5/8"
4"
4"4-5/8"
4"
4"4-5/8"
4-5/16"
HP-41" T-Bar (C1)
HP-49/16" T-Bar (C2)
HP-4STANDARD SCREW SLOT (C3)
HP-4FLUSH SCREW SLOT (C3F)
HP-41" TEGULAR (C1T)
HP-4VISIBLE FLANGE (VF)
HP-49/16" TEGULAR (C2T)
HP-4TECH ZONE 6" (TZ6)
1" T-Bar (C1)
4"6"
4"
HP-4TECH ZONE 6" (TZ6)
9/16" T-Bar (C2)
4"4-7/8"
4"
HP-4SPACKLE FLANGE (SF)
4"6"
4-5/16"
HP-4TECH ZONE 6" (TZ6)
STANDARD SCREW SLOT (C3)
HP-4TECH ZONE 6" (TZ6)
FLUSH SCREW SLOT (C3F)
4"6"
4"
4"6"
4"
HP-4TECH ZONE 6" (TZ6)9/16" TEGULAR (C2T)
4"6"
4"
(W) Rough-In Width
(W) Rough-In Width
(W) Rough-In Width (W) Rough-In Width (W) Rough-In Width (W) Rough-In Width (W) Rough-In Width
(W) Rough-In Width (W) Rough-In Width (W) Rough-In Width
(W) Rough-In Width (W) Rough-In Width (W) Rough-In Width
4"5"
4"
4"5"
4"
4"4-1/4"
4"
4"4-5/8"
4"
4"4-5/8"
4"
4"4-5/8"
4"
4"4-5/8"
4-5/16"
HP-41" T-Bar (C1)
HP-49/16" T-Bar (C2)
HP-4STANDARD SCREW SLOT (C3)
HP-4FLUSH SCREW SLOT (C3F)
HP-41" TEGULAR (C1T)
HP-4VISIBLE FLANGE (VF)
HP-49/16" TEGULAR (C2T)
HP-4TECH ZONE 6" (TZ6)
1" T-Bar (C1)
4"6"
4"
HP-4TECH ZONE 6" (TZ6)
9/16" T-Bar (C2)
4"4-7/8"
4"
HP-4SPACKLE FLANGE (SF)
4"6"
4-5/16"
HP-4TECH ZONE 6" (TZ6)
STANDARD SCREW SLOT (C3)
HP-4TECH ZONE 6" (TZ6)
FLUSH SCREW SLOT (C3F)
4"6"
4"
4"6"
4"
HP-4TECH ZONE 6" (TZ6)9/16" TEGULAR (C2T)
4"6"
4"
(W) Rough-In Width
(W) Rough-In Width
(W) Rough-In Width (W) Rough-In Width (W) Rough-In Width (W) Rough-In Width (W) Rough-In Width
(W) Rough-In Width (W) Rough-In Width (W) Rough-In Width
(W) Rough-In Width (W) Rough-In Width (W) Rough-In Width
4"5"
4"
4"5"
4"
4"4-1/4"
4"
4"4-5/8"
4"
4"4-5/8"
4"
4"4-5/8"
4"
4"4-5/8"
4-5/16"
HP-41" T-Bar (C1)
HP-49/16" T-Bar (C2)
HP-4STANDARD SCREW SLOT (C3)
HP-4FLUSH SCREW SLOT (C3F)
HP-41" TEGULAR (C1T)
HP-4VISIBLE FLANGE (VF)
HP-49/16" TEGULAR (C2T)
HP-4TECH ZONE 6" (TZ6)
1" T-Bar (C1)
4"6"
4"
HP-4TECH ZONE 6" (TZ6)
9/16" T-Bar (C2)
4"4-7/8"
4"
HP-4SPACKLE FLANGE (SF)
4"6"
4-5/16"
HP-4TECH ZONE 6" (TZ6)
STANDARD SCREW SLOT (C3)
HP-4TECH ZONE 6" (TZ6)
FLUSH SCREW SLOT (C3F)
4"6"
4"
4"6"
4"
HP-4TECH ZONE 6" (TZ6)9/16" TEGULAR (C2T)
4"6"
4"
(W) Rough-In Width
(W) Rough-In Width
(W) Rough-In Width (W) Rough-In Width (W) Rough-In Width (W) Rough-In Width (W) Rough-In Width
(W) Rough-In Width (W) Rough-In Width (W) Rough-In Width
(W) Rough-In Width (W) Rough-In Width (W) Rough-In Width1" T-Bar (C1)
1" Tegular (C1T)
9/16" T-Bar (C2)
9/16" Tegular (C2T)
Standard Screw Slot (C3)
Tech Zone 6" (TZ6)1" T-Bar (C1)
Tech Zone 6" (TZ6)Standard Screw Slot (C3)
Spackle Flange (SF)
Version 1 Version 2 Version 3
Visible Flange (VF)
Tech Zone 6" (TZ6)9/16" T-Bar (C2)
Tech Zone 6" (TZ6)Flush Screw Slot (C3F)
Tech Zone 6" (TZ6)9/16" Tegular (C2T)
Flush Screw Slot (C3F)
1/16" Formuddingand taping
3/8"
Ceiling Option VF
Note: +/- 1/16"
Ceiling Options C1T, C2T, C3F, SF, TZ6
Ceiling Options C1, C2, C3
Page 9
Page 9
Submitted by: Date:
Type: Project:
Ordering Info:
Protected by one or more US Patents: 8915613; D702,391; D702,390; D700,732
High Performance 4" Aperture (HP-4) Recessed
Finelite, Inc. • 30500 Whipple Road • Union City • CA 94587-1530 • P: 510-441-1100 • F: 510-441-1510 • www.finelite.com. © 2021 FINELITE, INC. ALL RIGHTS RESERVED. V8 CTK0236. 04/21. Due to continuing product improvements, Finelite reserves the right to change specifications without notice. Visit www.finelite.com for the most current data.
REGRESSED MOUNTING TYPES - T-BAR
REGRESSED MOUNTING TYPES - CUTOUT DIMENSIONS
HOUSING
Rough-In DimensionsHP-4-RG
1" T-Bar (C1)HP-4-RG
9/16" T-Bar (C2)HP-4-RG
STANDARD SCREW SLOT (C3)HP-4-RG
FLUSH SCREW SLOT (C3F)
HP-4-RG1" TEGULAR (C1T)
HP-4-RGVISIBLE FLANGE (VF)
HP-4-RG9/16" TEGULAR (C2T)
HP-4-RGSPACKLE FLANGE (SF)
HP-4-RGTECH ZONE 6" (TZ6)
1" T-Bar (C1)
HP-4-RGTECH ZONE 6" (TZ6)
9/16" T-Bar (C2)
HP-4-RGTECH ZONE 6" (TZ6)
STANDARD SCREW SLOT (C3)
HP-4-RGTECH ZONE 6" (TZ6)
FLUSH SCREW SLOT (C3F)
HP-4-RGTECH ZONE 6" (TZ6)9/16" TEGULAR (C2T)
4"
1"
5"
5"
(W) Rough-In Width
4"
1"
5"
5"
(W) Rough-In Width
4"
1"
4-5/8"
5"
(W) Rough-In Width
4"
1"
4-5/8"
5"
(W) Rough-In Width
4"
1"
6"
5"
(W) Rough-In Width
5"
4"
1" 1"
4-7/8"
5"
(W) Rough-In Width
4"4-1/4"
(W) Rough-In Width
4"
1"
4-5/8"
5"
(W) Rough-In Width
4"
1-5/16"
4-5/8"
5-5/16"
(W) Rough-In Width
4"
1"
6"
5"
(W) Rough-In Width
4"
1"
6"
5"
(W) Rough-In Width
4"
1-5/16"
6"
5-5/16"
(W) Rough-In Width
4"
1"
6"(W) Rough-In Width
5"
HP-4-RG1" T-Bar (C1)
HP-4-RG9/16" T-Bar (C2)
HP-4-RGSTANDARD SCREW SLOT (C3)
HP-4-RGFLUSH SCREW SLOT (C3F)
HP-4-RG1" TEGULAR (C1T)
HP-4-RGVISIBLE FLANGE (VF)
HP-4-RG9/16" TEGULAR (C2T)
HP-4-RGSPACKLE FLANGE (SF)
HP-4-RGTECH ZONE 6" (TZ6)
1" T-Bar (C1)
HP-4-RGTECH ZONE 6" (TZ6)
9/16" T-Bar (C2)
HP-4-RGTECH ZONE 6" (TZ6)
STANDARD SCREW SLOT (C3)
HP-4-RGTECH ZONE 6" (TZ6)
FLUSH SCREW SLOT (C3F)
HP-4-RGTECH ZONE 6" (TZ6)9/16" TEGULAR (C2T)
4"
1"
5"
5"
(W) Rough-In Width
4"
1"
5"
5"
(W) Rough-In Width
4"
1"
4-5/8"
5"
(W) Rough-In Width
4"
1"
4-5/8"
5"
(W) Rough-In Width
4"
1"
6"
5"
(W) Rough-In Width
5"
4"
1" 1"
4-7/8"
5"
(W) Rough-In Width
4"4-1/4"
(W) Rough-In Width
4"
1"
4-5/8"
5"
(W) Rough-In Width
4"
1-5/16"
4-5/8"
5-5/16"
(W) Rough-In Width
4"
1"
6"
5"
(W) Rough-In Width
4"
1"
6"
5"
(W) Rough-In Width
4"
1-5/16"
6"
5-5/16"
(W) Rough-In Width
4"
1"
6"(W) Rough-In Width
5"
HP-4-RG1" T-Bar (C1)
HP-4-RG9/16" T-Bar (C2)
HP-4-RGSTANDARD SCREW SLOT (C3)
HP-4-RGFLUSH SCREW SLOT (C3F)
HP-4-RG1" TEGULAR (C1T)
HP-4-RGVISIBLE FLANGE (VF)
HP-4-RG9/16" TEGULAR (C2T)
HP-4-RGSPACKLE FLANGE (SF)
HP-4-RGTECH ZONE 6" (TZ6)
1" T-Bar (C1)
HP-4-RGTECH ZONE 6" (TZ6)
9/16" T-Bar (C2)
HP-4-RGTECH ZONE 6" (TZ6)
STANDARD SCREW SLOT (C3)
HP-4-RGTECH ZONE 6" (TZ6)
FLUSH SCREW SLOT (C3F)
HP-4-RGTECH ZONE 6" (TZ6)9/16" TEGULAR (C2T)
4"
1"
5"
5"
(W) Rough-In Width
4"
1"
5"
5"
(W) Rough-In Width
4"
1"
4-5/8"
5"
(W) Rough-In Width
4"
1"
4-5/8"
5"
(W) Rough-In Width
4"
1"
6"
5"
(W) Rough-In Width
5"
4"
1" 1"
4-7/8"
5"
(W) Rough-In Width
4"4-1/4"
(W) Rough-In Width
4"
1"
4-5/8"
5"
(W) Rough-In Width
4"
1-5/16"
4-5/8"
5-5/16"
(W) Rough-In Width
4"
1"
6"
5"
(W) Rough-In Width
4"
1"
6"
5"
(W) Rough-In Width
4"
1-5/16"
6"
5-5/16"
(W) Rough-In Width
4"
1"
6"(W) Rough-In Width
5"
HP-4-RG1" T-Bar (C1)
HP-4-RG9/16" T-Bar (C2)
HP-4-RGSTANDARD SCREW SLOT (C3)
HP-4-RGFLUSH SCREW SLOT (C3F)
HP-4-RG1" TEGULAR (C1T)
HP-4-RGVISIBLE FLANGE (VF)
HP-4-RG9/16" TEGULAR (C2T)
HP-4-RGSPACKLE FLANGE (SF)
HP-4-RGTECH ZONE 6" (TZ6)
1" T-Bar (C1)
HP-4-RGTECH ZONE 6" (TZ6)
9/16" T-Bar (C2)
HP-4-RGTECH ZONE 6" (TZ6)
STANDARD SCREW SLOT (C3)
HP-4-RGTECH ZONE 6" (TZ6)
FLUSH SCREW SLOT (C3F)
HP-4-RGTECH ZONE 6" (TZ6)9/16" TEGULAR (C2T)
4"
1"
5"
5"
(W) Rough-In Width
4"
1"
5"
5"
(W) Rough-In Width
4"
1"
4-5/8"
5"
(W) Rough-In Width
4"
1"
4-5/8"
5"
(W) Rough-In Width
4"
1"
6"
5"
(W) Rough-In Width
5"
4"
1" 1"
4-7/8"
5"
(W) Rough-In Width
4"4-1/4"
(W) Rough-In Width
4"
1"
4-5/8"
5"
(W) Rough-In Width
4"
1-5/16"
4-5/8"
5-5/16"
(W) Rough-In Width
4"
1"
6"
5"
(W) Rough-In Width
4"
1"
6"
5"
(W) Rough-In Width
4"
1-5/16"
6"
5-5/16"
(W) Rough-In Width
4"
1"
6"(W) Rough-In Width
5"
HP-4-RG1" T-Bar (C1)
HP-4-RG9/16" T-Bar (C2)
HP-4-RGSTANDARD SCREW SLOT (C3)
HP-4-RGFLUSH SCREW SLOT (C3F)
HP-4-RG1" TEGULAR (C1T)
HP-4-RGVISIBLE FLANGE (VF)
HP-4-RG9/16" TEGULAR (C2T)
HP-4-RGSPACKLE FLANGE (SF)
HP-4-RGTECH ZONE 6" (TZ6)
1" T-Bar (C1)
HP-4-RGTECH ZONE 6" (TZ6)
9/16" T-Bar (C2)
HP-4-RGTECH ZONE 6" (TZ6)
STANDARD SCREW SLOT (C3)
HP-4-RGTECH ZONE 6" (TZ6)
FLUSH SCREW SLOT (C3F)
HP-4-RGTECH ZONE 6" (TZ6)9/16" TEGULAR (C2T)
4"
1"
5"
5"
(W) Rough-In Width
4"
1"
5"
5"
(W) Rough-In Width
4"
1"
4-5/8"
5"
(W) Rough-In Width
4"
1"
4-5/8"
5"
(W) Rough-In Width
4"
1"
6"
5"
(W) Rough-In Width
5"
4"
1" 1"
4-7/8"
5"
(W) Rough-In Width
4"4-1/4"
(W) Rough-In Width
4"
1"
4-5/8"
5"
(W) Rough-In Width
4"
1-5/16"
4-5/8"
5-5/16"
(W) Rough-In Width
4"
1"
6"
5"
(W) Rough-In Width
4"
1"
6"
5"
(W) Rough-In Width
4"
1-5/16"
6"
5-5/16"
(W) Rough-In Width
4"
1"
6"(W) Rough-In Width
5"
HP-4-RG1" T-Bar (C1)
HP-4-RG9/16" T-Bar (C2)
HP-4-RGSTANDARD SCREW SLOT (C3)
HP-4-RGFLUSH SCREW SLOT (C3F)
HP-4-RG1" TEGULAR (C1T)
HP-4-RGVISIBLE FLANGE (VF)
HP-4-RG9/16" TEGULAR (C2T)
HP-4-RGSPACKLE FLANGE (SF)
HP-4-RGTECH ZONE 6" (TZ6)
1" T-Bar (C1)
HP-4-RGTECH ZONE 6" (TZ6)
9/16" T-Bar (C2)
HP-4-RGTECH ZONE 6" (TZ6)
STANDARD SCREW SLOT (C3)
HP-4-RGTECH ZONE 6" (TZ6)
FLUSH SCREW SLOT (C3F)
HP-4-RGTECH ZONE 6" (TZ6)9/16" TEGULAR (C2T)
4"
1"
5"
5"
(W) Rough-In Width
4"
1"
5"
5"
(W) Rough-In Width
4"
1"
4-5/8"
5"
(W) Rough-In Width
4"
1"
4-5/8"
5"
(W) Rough-In Width
4"
1"
6"
5"
(W) Rough-In Width
5"
4"
1" 1"
4-7/8"
5"
(W) Rough-In Width
4"4-1/4"
(W) Rough-In Width
4"
1"
4-5/8"
5"
(W) Rough-In Width
4"
1-5/16"
4-5/8"
5-5/16"
(W) Rough-In Width
4"
1"
6"
5"
(W) Rough-In Width
4"
1"
6"
5"
(W) Rough-In Width
4"
1-5/16"
6"
5-5/16"
(W) Rough-In Width
4"
1"
6"(W) Rough-In Width
5"
HP-4-RG1" T-Bar (C1)
HP-4-RG9/16" T-Bar (C2)
HP-4-RGSTANDARD SCREW SLOT (C3)
HP-4-RGFLUSH SCREW SLOT (C3F)
HP-4-RG1" TEGULAR (C1T)
HP-4-RGVISIBLE FLANGE (VF)
HP-4-RG9/16" TEGULAR (C2T)
HP-4-RGSPACKLE FLANGE (SF)
HP-4-RGTECH ZONE 6" (TZ6)
1" T-Bar (C1)
HP-4-RGTECH ZONE 6" (TZ6)
9/16" T-Bar (C2)
HP-4-RGTECH ZONE 6" (TZ6)
STANDARD SCREW SLOT (C3)
HP-4-RGTECH ZONE 6" (TZ6)
FLUSH SCREW SLOT (C3F)
HP-4-RGTECH ZONE 6" (TZ6)9/16" TEGULAR (C2T)
4"
1"
5"
5"
(W) Rough-In Width
4"
1"
5"
5"
(W) Rough-In Width
4"
1"
4-5/8"
5"
(W) Rough-In Width
4"
1"
4-5/8"
5"
(W) Rough-In Width
4"
1"
6"
5"
(W) Rough-In Width
5"
4"
1" 1"
4-7/8"
5"
(W) Rough-In Width
4"4-1/4"
(W) Rough-In Width
4"
1"
4-5/8"
5"
(W) Rough-In Width
4"
1-5/16"
4-5/8"
5-5/16"
(W) Rough-In Width
4"
1"
6"
5"
(W) Rough-In Width
4"
1"
6"
5"
(W) Rough-In Width
4"
1-5/16"
6"
5-5/16"
(W) Rough-In Width
4"
1"
6"(W) Rough-In Width
5"
HP-4-RG1" T-Bar (C1)
HP-4-RG9/16" T-Bar (C2)
HP-4-RGSTANDARD SCREW SLOT (C3)
HP-4-RGFLUSH SCREW SLOT (C3F)
HP-4-RG1" TEGULAR (C1T)
HP-4-RGVISIBLE FLANGE (VF)
HP-4-RG9/16" TEGULAR (C2T)
HP-4-RGSPACKLE FLANGE (SF)
HP-4-RGTECH ZONE 6" (TZ6)
1" T-Bar (C1)
HP-4-RGTECH ZONE 6" (TZ6)
9/16" T-Bar (C2)
HP-4-RGTECH ZONE 6" (TZ6)
STANDARD SCREW SLOT (C3)
HP-4-RGTECH ZONE 6" (TZ6)
FLUSH SCREW SLOT (C3F)
HP-4-RGTECH ZONE 6" (TZ6)9/16" TEGULAR (C2T)
4"
1"
5"
5"
(W) Rough-In Width
4"
1"
5"
5"
(W) Rough-In Width
4"
1"
4-5/8"
5"
(W) Rough-In Width
4"
1"
4-5/8"
5"
(W) Rough-In Width
4"
1"
6"
5"
(W) Rough-In Width
5"
4"
1" 1"
4-7/8"
5"
(W) Rough-In Width
4"4-1/4"
(W) Rough-In Width
4"
1"
4-5/8"
5"
(W) Rough-In Width
4"
1-5/16"
4-5/8"
5-5/16"
(W) Rough-In Width
4"
1"
6"
5"
(W) Rough-In Width
4"
1"
6"
5"
(W) Rough-In Width
4"
1-5/16"
6"
5-5/16"
(W) Rough-In Width
4"
1"
6"(W) Rough-In Width
5"
HP-4-RG1" T-Bar (C1)
HP-4-RG9/16" T-Bar (C2)
HP-4-RGSTANDARD SCREW SLOT (C3)
HP-4-RGFLUSH SCREW SLOT (C3F)
HP-4-RG1" TEGULAR (C1T)
HP-4-RGVISIBLE FLANGE (VF)
HP-4-RG9/16" TEGULAR (C2T)
HP-4-RGSPACKLE FLANGE (SF)
HP-4-RGTECH ZONE 6" (TZ6)
1" T-Bar (C1)
HP-4-RGTECH ZONE 6" (TZ6)
9/16" T-Bar (C2)
HP-4-RGTECH ZONE 6" (TZ6)
STANDARD SCREW SLOT (C3)
HP-4-RGTECH ZONE 6" (TZ6)
FLUSH SCREW SLOT (C3F)
HP-4-RGTECH ZONE 6" (TZ6)9/16" TEGULAR (C2T)
4"
1"
5"
5"
(W) Rough-In Width
4"
1"
5"
5"
(W) Rough-In Width
4"
1"
4-5/8"
5"
(W) Rough-In Width
4"
1"
4-5/8"
5"
(W) Rough-In Width
4"
1"
6"
5"
(W) Rough-In Width
5"
4"
1" 1"
4-7/8"
5"
(W) Rough-In Width
4"4-1/4"
(W) Rough-In Width
4"
1"
4-5/8"
5"
(W) Rough-In Width
4"
1-5/16"
4-5/8"
5-5/16"
(W) Rough-In Width
4"
1"
6"
5"
(W) Rough-In Width
4"
1"
6"
5"
(W) Rough-In Width
4"
1-5/16"
6"
5-5/16"
(W) Rough-In Width
4"
1"
6"(W) Rough-In Width
5"
HP-4-RG1" T-Bar (C1)
HP-4-RG9/16" T-Bar (C2)
HP-4-RGSTANDARD SCREW SLOT (C3)
HP-4-RGFLUSH SCREW SLOT (C3F)
HP-4-RG1" TEGULAR (C1T)
HP-4-RGVISIBLE FLANGE (VF)
HP-4-RG9/16" TEGULAR (C2T)
HP-4-RGSPACKLE FLANGE (SF)
HP-4-RGTECH ZONE 6" (TZ6)
1" T-Bar (C1)
HP-4-RGTECH ZONE 6" (TZ6)
9/16" T-Bar (C2)
HP-4-RGTECH ZONE 6" (TZ6)
STANDARD SCREW SLOT (C3)
HP-4-RGTECH ZONE 6" (TZ6)
FLUSH SCREW SLOT (C3F)
HP-4-RGTECH ZONE 6" (TZ6)9/16" TEGULAR (C2T)
4"
1"
5"
5"
(W) Rough-In Width
4"
1"
5"
5"
(W) Rough-In Width
4"
1"
4-5/8"
5"
(W) Rough-In Width
4"
1"
4-5/8"
5"
(W) Rough-In Width
4"
1"
6"
5"
(W) Rough-In Width
5"
4"
1" 1"
4-7/8"
5"
(W) Rough-In Width
4"4-1/4"
(W) Rough-In Width
4"
1"
4-5/8"
5"
(W) Rough-In Width
4"
1-5/16"
4-5/8"
5-5/16"
(W) Rough-In Width
4"
1"
6"
5"
(W) Rough-In Width
4"
1"
6"
5"
(W) Rough-In Width
4"
1-5/16"
6"
5-5/16"
(W) Rough-In Width
4"
1"
6"(W) Rough-In Width
5"
HP-4-RG1" T-Bar (C1)
HP-4-RG9/16" T-Bar (C2)
HP-4-RGSTANDARD SCREW SLOT (C3)
HP-4-RGFLUSH SCREW SLOT (C3F)
HP-4-RG1" TEGULAR (C1T)
HP-4-RGVISIBLE FLANGE (VF)
HP-4-RG9/16" TEGULAR (C2T)
HP-4-RGSPACKLE FLANGE (SF)
HP-4-RGTECH ZONE 6" (TZ6)
1" T-Bar (C1)
HP-4-RGTECH ZONE 6" (TZ6)
9/16" T-Bar (C2)
HP-4-RGTECH ZONE 6" (TZ6)
STANDARD SCREW SLOT (C3)
HP-4-RGTECH ZONE 6" (TZ6)
FLUSH SCREW SLOT (C3F)
HP-4-RGTECH ZONE 6" (TZ6)9/16" TEGULAR (C2T)
4"
1"
5"
5"
(W) Rough-In Width
4"
1"
5"
5"
(W) Rough-In Width
4"
1"
4-5/8"
5"
(W) Rough-In Width
4"
1"
4-5/8"
5"
(W) Rough-In Width
4"
1"
6"
5"
(W) Rough-In Width
5"
4"
1" 1"
4-7/8"
5"
(W) Rough-In Width
4"4-1/4"
(W) Rough-In Width
4"
1"
4-5/8"
5"
(W) Rough-In Width
4"
1-5/16"
4-5/8"
5-5/16"
(W) Rough-In Width
4"
1"
6"
5"
(W) Rough-In Width
4"
1"
6"
5"
(W) Rough-In Width
4"
1-5/16"
6"
5-5/16"
(W) Rough-In Width
4"
1"
6"(W) Rough-In Width
5"
HP-4-RG1" T-Bar (C1)
HP-4-RG9/16" T-Bar (C2)
HP-4-RGSTANDARD SCREW SLOT (C3)
HP-4-RGFLUSH SCREW SLOT (C3F)
HP-4-RG1" TEGULAR (C1T)
HP-4-RGVISIBLE FLANGE (VF)
HP-4-RG9/16" TEGULAR (C2T)
HP-4-RGSPACKLE FLANGE (SF)
HP-4-RGTECH ZONE 6" (TZ6)
1" T-Bar (C1)
HP-4-RGTECH ZONE 6" (TZ6)
9/16" T-Bar (C2)
HP-4-RGTECH ZONE 6" (TZ6)
STANDARD SCREW SLOT (C3)
HP-4-RGTECH ZONE 6" (TZ6)
FLUSH SCREW SLOT (C3F)
HP-4-RGTECH ZONE 6" (TZ6)9/16" TEGULAR (C2T)
4"
1"
5"
5"
(W) Rough-In Width
4"
1"
5"
5"
(W) Rough-In Width
4"
1"
4-5/8"
5"
(W) Rough-In Width
4"
1"
4-5/8"
5"
(W) Rough-In Width
4"
1"
6"
5"
(W) Rough-In Width
5"
4"
1" 1"
4-7/8"
5"
(W) Rough-In Width
4"4-1/4"
(W) Rough-In Width
4"
1"
4-5/8"
5"
(W) Rough-In Width
4"
1-5/16"
4-5/8"
5-5/16"
(W) Rough-In Width
4"
1"
6"
5"
(W) Rough-In Width
4"
1"
6"
5"
(W) Rough-In Width
4"
1-5/16"
6"
5-5/16"
(W) Rough-In Width
4"
1"
6"(W) Rough-In Width
5"
HP-4-RG1" T-Bar (C1)
HP-4-RG9/16" T-Bar (C2)
HP-4-RGSTANDARD SCREW SLOT (C3)
HP-4-RGFLUSH SCREW SLOT (C3F)
HP-4-RG1" TEGULAR (C1T)
HP-4-RGVISIBLE FLANGE (VF)
HP-4-RG9/16" TEGULAR (C2T)
HP-4-RGSPACKLE FLANGE (SF)
HP-4-RGTECH ZONE 6" (TZ6)
1" T-Bar (C1)
HP-4-RGTECH ZONE 6" (TZ6)
9/16" T-Bar (C2)
HP-4-RGTECH ZONE 6" (TZ6)
STANDARD SCREW SLOT (C3)
HP-4-RGTECH ZONE 6" (TZ6)
FLUSH SCREW SLOT (C3F)
HP-4-RGTECH ZONE 6" (TZ6)9/16" TEGULAR (C2T)
4"
1"
5"
5"
(W) Rough-In Width
4"
1"
5"
5"
(W) Rough-In Width
4"
1"
4-5/8"
5"
(W) Rough-In Width
4"
1"
4-5/8"
5"
(W) Rough-In Width
4"
1"
6"
5"
(W) Rough-In Width
5"
4"
1" 1"
4-7/8"
5"
(W) Rough-In Width
4"4-1/4"
(W) Rough-In Width
4"
1"
4-5/8"
5"
(W) Rough-In Width
4"
1-5/16"
4-5/8"
5-5/16"
(W) Rough-In Width
4"
1"
6"
5"
(W) Rough-In Width
4"
1"
6"
5"
(W) Rough-In Width
4"
1-5/16"
6"
5-5/16"
(W) Rough-In Width
4"
1"
6"(W) Rough-In Width
5"
1" T-Bar (C1)
1" Tegular (C1T)
9/16" T-Bar (C2)
9/16" Tegular (C2T)
Standard Screw Slot (C3)
Tech Zone 6" (TZ6)1" T-Bar (C1)
Tech Zone 6" (TZ6)Standard Screw Slot (C3)
Spackle Flange (SF)
Version 1 Version 2 Version 3
Visible Flange (VF)
Tech Zone 6" (TZ6)9/16" T-Bar (C2)
Tech Zone 6" (TZ6)Flush Screw Slot (C3F)
Tech Zone 6" (TZ6)9/16" Tegular (C2T)
Flush Screw Slot (C3F)
1/16" Formuddingand taping
3/8"
Ceiling Option VF Ceiling Options C1T, C2T, C3F, SF, TZ6
Ceiling Options C1, C2, C3
Note: +/- 1/16"
Regressed Lens: Regressed lens version is 5" tall with a lens that is regressed 1" from ceiling line.
Page 10
Page 10
Submitted by: Date:
Type: Project:
Ordering Info:
Protected by one or more US Patents: 8915613; D702,391; D702,390; D700,732
High Performance 4" Aperture (HP-4) Recessed
Finelite, Inc. • 30500 Whipple Road • Union City • CA 94587-1530 • P: 510-441-1100 • F: 510-441-1510 • www.finelite.com. © 2021 FINELITE, INC. ALL RIGHTS RESERVED. V8 CTK0236. 04/21. Due to continuing product improvements, Finelite reserves the right to change specifications without notice. Visit www.finelite.com for the most current data.
4"
4"
HP4-R-DSO-4'-V-835Downlight: Downlight Spread Optic
Efficacy: 100 lm/WTotal luminaire output: 3763 lumens (941 lm/ft) 36.1 watts (9.0 W/ft)Peak Candela Value: 1250 @ 0ºCRI: 80 / CCT: 3500KITL LM79 Report 92993
1 Family Correlation based on 4' luminaire 3500K Very High Output (V) test - 120V.2 Based on ITL report: 92993
S - Standard Output, B - Boosted Standard Output, H - High Output, V - Very High Output
Total Light Output, 3500K, 80 CRI (Lumens) - 4' Luminaire
S 1 B 1 H 1 V 2
1540 1937 2927 3763
Light Output, 3500K, 80 CRI (Lumens Per Foot)
S 1 B 1 H 1 V 2
385 484 732 941
Power, 3500K (Watts Per Foot)
S 1 B 1 H 1 V 2
3.5 4.5 6.9 9.0
Efficacy, 3500K, 80 CRI (Lumens Per Watt)
S 1 B 1 H 1 V 2
109.0 107.9 105.7 104.2
High Output (H), 4000K, 90 CRI
Lumen Adjustment Factor: 0.789
Total Light Output: 2927lm x 0.789 = 2309 lm
Total Light Output per Foot: 732 lm/ft x 0.789 = 578 lm/ft.
watts/foot: 6.9 W/ft.
Efficacy = = 84 lm/W578
6.9
lmft.Wft.
Lumen Adjustment Factors 80 CRI
3000K 0.9853500K 1.0004000K 1.032
Lumen Adjustment Factors 90 CRI
3000K 0.7463500K 0.7604000K 0.789
Sample Lumen Adjustment Calculation
Recessed Photometry - 4' Luminaire 3500K1308
981
654
327
CANDELA DISTRIBTUTION0.0 22.5 45.0 67.5 90.0 FLUX
0 1250 1250 1250 1250 12505 1241 1243 1249 1255 1257 11915 1187 1204 1242 1287 1298 35125 1053 1091 1197 1277 1300 54635 887 950 1096 1193 1205 66945 707 780 930 1002 1014 68955 528 591 717 765 768 60865 356 399 482 508 507 45175 196 217 257 265 263 25785 58 61 68 66 66 7390 0 0 0 0 0
Page 11
Page 11
Submitted by: Date:
Type: Project:
Ordering Info:
Protected by one or more US Patents: 8915613; D702,391; D702,390; D700,732
High Performance 4" Aperture (HP-4) Recessed
Finelite, Inc. • 30500 Whipple Road • Union City • CA 94587-1530 • P: 510-441-1100 • F: 510-441-1510 • www.finelite.com. © 2021 FINELITE, INC. ALL RIGHTS RESERVED. V8 CTK0236. 04/21. Due to continuing product improvements, Finelite reserves the right to change specifications without notice. Visit www.finelite.com for the most current data.
CANDELA DISTRIBUTION 0.0 22.5 45 67.5 90 Flux0 1442 1442 1442 1442 14425 1434 1434 1433 1433 1434 13615 1369 1360 1365 1364 1359 38425 1241 1226 1232 1225 1219 56635 1064 1053 1055 1043 1037 65745 864 853 851 840 834 65555 650 644 640 631 626 57165 441 436 433 428 425 42875 238 237 238 237 236 25285 70 69 70 72 71 7890 0 0 0 0 0
1082
1442
721
361
4"
4"
4"3/16"
4"
HP4-R-D-4'-V-835Downlight: Flush Diffuser
Efficacy: 101 lm/WTotal luminaire output: 3726 lumens (932 lm/ft) 37 watts (9.3 W/ft)Peak Candela Value: 1442 @ 0ºCRI: 80 / CCT: 3500KITL LM79 Report 85128
1 Family Correlation based on 4’ luminaire 3500K Very High Output (V) test - 120V.2 Based on ITL report: 85128
S - Standard Output, B - Boosted Standard Output, H - High Output, V - Very High Output
High Output (H), 4000K, 90 CRI
Lumen Adjustment Factor: 0.789
Total Light Output: 2898 lm x 0.789 = 2287 lm
Total Light Output per Foot: 725 lm/ft x 0.789 = 572 lm/ft.
watts/foot: 7.1 W/ft.
Efficacy = = 80 lm/W572
7.1
lmft.Wft.
Lumen Adjustment Factors 80 CRI
3000K 0.9853500K 1.0004000K 1.032
Lumen Adjustment Factors 90 CRI
3000K 0.7463500K 0.7604000K 0.789
Sample Lumen Adjustment Calculation
Total Light Output, 3500K, 80 CRI (Lumens) - 4' Luminaire
S 1 B 1 H 1 V 2
1525 1917 2898 3726
Light Output, 3500K, 80 CRI (Lumens Per Foot)
S 1 B 1 H 1 V 2
381 479 725 932
Power, 3500K (Watts Per Foot)
S 1 B 1 H 1 V 2
3.6 4.6 7.1 9.3
Efficacy, 3500K, 80 CRI (Lumens Per Watt)
S 1 B 1 H 1 V 2
105 104 102 101
Recessed Photometry - 4' Luminaire 3500K
Page 12
Page 12
Submitted by: Date:
Type: Project:
Ordering Info:
Protected by one or more US Patents: 8915613; D702,391; D702,390; D700,732
High Performance 4" Aperture (HP-4) Recessed
Finelite, Inc. • 30500 Whipple Road • Union City • CA 94587-1530 • P: 510-441-1100 • F: 510-441-1510 • www.finelite.com. © 2021 FINELITE, INC. ALL RIGHTS RESERVED. V8 CTK0236. 04/21. Due to continuing product improvements, Finelite reserves the right to change specifications without notice. Visit www.finelite.com for the most current data.
CANDELA DISTRIBUTION 0.0 22.5 45.0 67.5 90.0 FLUX0 373 373 373 373 3735 495 456 374 306 281 3715 791 649 366 209 175 12125 1018 818 347 147 115 21735 1072 896 315 101 72 29445 996 848 271 62 35 32855 842 708 214 28 6 31165 673 536 149 5 6 25975 407 363 84 4 5 17385 157 137 25 0 0 7090 75 54 0 0 0
804
1072
536
268
HP4-R-WW-D-K-4'-V-835Downlight: With Kicker
Efficacy: 92 lm/WTotal luminaire output: 1816 lumens (454 lm/ft) 21.5 watts (5.4 W/ft)Peak Candela Value: 1072 @ 35ºCRI: 80 / CCT: 3500KITL LM79 Report 85130
1 Family Correlation based on 4' luminaire 3500K Very High Output (V) test - 120V.2 Based on ITL report: 85130
S - Standard Output, B - Boosted Standard Output, H - High Output, V - Very High Output
Total Light Output, 3500K, 80 CRI (Lumens) - 4' Luminaire
S 1 B 1 H 1 V 2
743 935 1412 1816
Light Output, 3500K, 80 CRI (Lumens Per Foot)
S 1 B 1 H 1 V 2
186 234 353 454
Power, 3500K (Watts Per Foot)
S 1 B 1 H 1 V 2
2.0 2.5 3.8 5.0
Efficacy, 3500K, 80 CRI (Lumens Per Watt)
S 1 B 1 H 1 V 2
91 92 92 92
High Output (H), 4000K, 90 CRI
Lumen Adjustment Factor: 0.789
Total Light Output: 1412 lm x 0.789 = 1114 lm
Total Light Output per Foot: 353 lm/ft x 0.789 = 279 lm/ft.
watts/foot: 3.8 W/ft.
Efficacy = = 73 lm/W279
3.8
lmft.Wft.
Lumen Adjustment Factors 80 CRI
3000K 0.9853500K 1.0004000K 1.032
Lumen Adjustment Factors 90 CRI
3000K 0.7463500K 0.7604000K 0.789
Sample Lumen Adjustment Calculation
Wall Wash Recessed - 4' Luminaire 3500K
4"3/8"
4"
Page 13
Page 13
Submitted by: Date:
Type: Project:
Ordering Info:
Protected by one or more US Patents: 8915613; D702,391; D702,390; D700,732
High Performance 4" Aperture (HP-4) Recessed
Finelite, Inc. • 30500 Whipple Road • Union City • CA 94587-1530 • P: 510-441-1100 • F: 510-441-1510 • www.finelite.com. © 2021 FINELITE, INC. ALL RIGHTS RESERVED. V8 CTK0236. 04/21. Due to continuing product improvements, Finelite reserves the right to change specifications without notice. Visit www.finelite.com for the most current data.
3 4 4 4 5 5 5 4 4 4 4 3
4 5 5 6 6 6 6 6 6 5 5 4
5 6 7 7 8 8 8 8 8 7 7 5
6 8 9 11 11 12 12 11 11 10 8 6
8 11 14 16 17 18 18 17 16 14 11 8
11 16 21 25 29 30 30 29 26 22 16 12
14 22 31 40 45 47 47 45 41 32 22 14
16 27 43 55 61 62 62 61 55 43 27 16
11 21 33 42 47 47 47 47 43 33 20 12
4 5 5 5 5 6 6 6 5 5 4 4
5 6 6 7 7 7 7 7 7 6 6 5
6 8 8 9 10 10 10 10 9 9 8 6
8 10 11 13 14 14 14 14 13 11 10 8
10 13 16 18 20 21 21 20 18 16 13 10
13 18 22 26 30 31 31 30 27 23 17 14
15 22 29 37 41 43 43 41 37 30 22 15
15 24 35 44 49 50 50 49 43 35 24 16
11 17 24 30 34 35 35 34 31 25 17 11
3 4 4 4 5 5 5 4 4 4 4 3
4 5 5 6 6 6 6 6 6 5 5 4
5 6 7 7 8 8 8 8 8 7 7 5
6 8 9 11 11 12 12 11 11 10 8 6
8 11 14 16 17 18 18 17 16 14 11 8
11 16 21 25 29 30 30 29 26 22 16 12
14 22 31 40 45 47 47 45 41 32 22 14
16 27 43 55 61 62 62 61 55 43 27 16
11 21 33 42 47 47 47 47 43 33 20 12
4 5 5 5 5 6 6 6 5 5 4 4
5 6 6 7 7 7 7 7 7 6 6 5
6 8 8 9 10 10 10 10 9 9 8 6
8 10 11 13 14 14 14 14 13 11 10 8
10 13 16 18 20 21 21 20 18 16 13 10
13 18 22 26 30 31 31 30 27 23 17 14
15 22 29 37 41 43 43 41 37 30 22 15
15 24 35 44 49 50 50 49 43 35 24 16
11 17 24 30 34 35 35 34 31 25 17 11
Ceiling
Wall
Wall
Ceiling
Luminaire
Setback Distance
Setback Distance - 2'
Setback Distance - 2 1/2'
9'
9'
HP4-R-WW-D-K-4'-V-835Downlight: With Kicker
Total luminaire output: 1450 lumens (363 lm/ft) 19.1 watts (4.8 W/ft)CRI: 80 / CCT: 3500K
Luminaire length: 8'To Bottom of the luminaire: 9'-0"Room reflectances: 80-50-20Maintained illuminance levels: LLF 0.90"
WALL WASH RECESSED - SETBACK INFO AND APPLICATION DATA
Page 14
Page 14
Submitted by: Date:
Type: Project:
Ordering Info:
Protected by one or more US Patents: 8915613; D702,391; D702,390; D700,732
High Performance 4" Aperture (HP-4) Recessed
Finelite, Inc. • 30500 Whipple Road • Union City • CA 94587-1530 • P: 510-441-1100 • F: 510-441-1510 • www.finelite.com. © 2021 FINELITE, INC. ALL RIGHTS RESERVED. V8 CTK0236. 04/21. Due to continuing product improvements, Finelite reserves the right to change specifications without notice. Visit www.finelite.com for the most current data.
• CCT range: 2700K - 6500K• Dimming Range: 100% to 10%• CRI Options: 80 CRI or 90 CRI
Apply a power adjustment factor to calculate wattage usage
(Example: a 50 watt luminaire in static white would draw 55 watts using 0-10V Tunable White)
0-10V Tunable White
TUNABLE WHITE FEATURES
PHOTOMETRY
POWER CONVERSION FACTOR
1.1X
WIRING DIAGRAM - DIMMABLE TO 10%
Pink, Purple Orange, Blue
0-10V dimmingand control feed
WIRING LEGEND
Pink Dimming 0-10V DC
Purple Dimming 0-10V DC
Orange TW 0-10V DC
Blue TW 0-10V DC
DUAL FEED DETAIL
Black, White, Green
Power Feed
WIRING LEGEND
Black Hot Line Voltage
White Neutral Line Voltage
Green Ground
120/277V CKT
Occ. Sensor
0-10V0-10V
Class 1 Wiring
Class 2 Wiring
0-10V Layer Pack
Line In
J-Box
aa
Dim + TW
General Lighting Zonea
CAT5 CAT5
a
Switched Line Out
• Purple (+) / Pink (-) control wires are for intensity control• Orange (+) / Blue (-) control wires are for Tunable White control
Luminaire Wiring
Note: Load or Dim to Off options available.
Finelite's award-winning, contractor friendly Tunable White luminaires are available at low cost, with powerful and simple 0-10V tuning and intensity controls.
LUMINAIRE FAMILYMODIFICATIONS/RESTRICTIONS
Section LengthsRecessed Direct 2' 3' 4' 5' 6' 7' 8' 9' 10' 11' 12'
Output S,B,H,V Single Circuit Rows can be comprised of 2'-12' sections. Tailored lengths available.
Integral Battery Backup (BSL310LP) P P P