Figure 1: The site prior to surgery
Figure 1: The site prior to surgery
Figure 2: Opened flap, large crater and perforation of buccal plate
Figure 3: 2.0mm pilot drill is used to drill beyond the depth of the socket
Figure 4: The final drill used to evaluate the position and angulation of the preparation.
Figure 5: A 4.20mm diameter 13mm length Tapered Self Thread Implant is selected.
Figure 6: A cover screw is placed on the implant
Figure 7: The implant and socket covered by a resorbable membrane.
Figure 8: Sutured flap.
Figure 9: Surgical site after 4 months of healing.
Figure 10: Implant exposed positioning the flap buccally in order to achieve attached gingiva.
Figure 11: The 2-piece zirconium titanium abutment.
Figure 12: The porcelain bonded to the zirconium.
Figure 13: The porcelain bonded to the zirconium.
Figure 12: The porcelain bonded to the zirconium.
Figure 15: Composite closing the top of the screw of the final restoration.