Hi-lumeTM A-Series LTE – Japan ® SPECIFICATION SUBMITTAL Page Job Name: Job Number: Model Numbers: LED Dimming Driver Architectural Dimming 369677e 1 08.07.2015 Hi-lume® A-Series Driver Overview Forward Phase Control The Hi-lume® A-Series Driver is a high-performance LED driver that provides smooth, continuous 1% dimming for constant current LED modules. Features • Continuous, flicker-free dimming from 100% to 1%. • Guaranteed compatibility with selected HomeWorks®, GRAFIK Eye® QS, and GRAFIK SystemsTM dimmers. Please see the chart “Compatible Controls” at the end of this document or contact Lutron Asuka for details regarding compatible controls. • 100% performance-tested at factory. • A rated lifetime of 50 000 hours @ t c = 65 °C. • PSE Certified. • RoHS Compliant. • Pulse width modulation (PWM) or constant current reduction (CCR) dimming methods available. See Application Note #360 for details. • For more information please go to: www.lutron.com/HilumeLED Hi-lume® A-Series, case type K 76 mm W × 25 mm H × 124 mm L
14
Embed
Hi-lume A-Series Driver Overview Forward Phase Control · PDF fileHi-lume ® A-Series Driver Overview ... •otal Harmonic Distortion (THD): < T ... Driver (Class 2) Pulse Width...
This document is posted to help you gain knowledge. Please leave a comment to let me know what you think about it! Share it to your friends and learn new things together.
Transcript
Hi-lumeTM A-Series LTE – Japan
® SPECIF ICAT ION SUBMITTAL Page
Job Name:
Job Number:
Model Numbers:
LED Dimming Driver Architectural Dimming
369677e 1 08.07.2015
Hi-lume® A-Series Driver Overview Forward Phase Control
The Hi-lume® A-Series Driver is a high-performance LED driver that provides smooth, continuous 1% dimming for constant current LED modules.
Features• Continuous, flicker-free dimming from 100% to 1%.• Guaranteed compatibility with selected HomeWorks®,
GRAFIK Eye® QS, and GRAFIK SystemsTM dimmers. Please see the chart “Compatible Controls” at the end of this document or contact Lutron Asuka for details regarding compatible controls.
• 100% performance-tested at factory.• A rated lifetime of 50 000 hours @ tc = 65 °C.• PSE Certified.• RoHS Compliant.• Pulse width modulation (PWM) or constant current
reduction (CCR) dimming methods available. See Application Note #360 for details.
• For more information please go to: www.lutron.com/HilumeLED
Hi-lume® A-Series, case type K76 mm W × 25 mm H × 124 mm L
Hi-lumeTM A-Series LTE – Japan
® SPECIF ICAT ION SUBMITTAL Page
Job Name:
Job Number:
Model Numbers:
LED Dimming Driver Architectural Dimming
369677e 2 08.07.2015
Specifications
Performance• Dimming Range: 100% to 1%• Operating Voltage: 100 V~ at 50/60 Hz (Forward
Phase Control)• A rated lifetime of 50,000 hours @ tc = 149 °F (65 °C).
– For rated warranty, tc not to exceed the maximum rated temperatures. 1
• Patented thermal foldback protection.• LEDs turn on to any dimmed level without going to full
brightness.• Nonvolatile memory restores all driver settings after
power failure.• Power Factor: > 0.90 at 40 W• Total Harmonic Distortion (THD): < 20% at 40 W• Inrush Current: < 2 A• Inrush Current Limiting Circuitry: eliminates circuit
breaker tripping, switch arcing and relay failure.• Open circuit protected• Short circuit protected• Turn-on time: ≤ 1.5 seconds 2
• PWM Dimming Frequency: 550 Hz
Environmental• Sound Rating: Class A.• Relative Humidity: Maximum 90% non-condensing.• Minimum operating ambient temperature (ta) = 0 °C.
Standards• Meets IEEE C62.41 category A surge protection
standards up to and including 4 kV.• Manufacturing facilities employ ESD reduction
practices that comply with the requirements of ANSI/ESD S20.20.
• Lutron® Quality Systems registered to ISO 9001.2008.• H PSE certified.
Driver Wiring and Mounting• Driver is grounded by a mounting screw to the
grounded fixture or by terminal connection.• Terminal blocks on the driver accept one solid wire
per terminal from Ø 1.024 mm (18 AWG) to Ø 1.29 mm (16 AWG).
• Fixture must be grounded in accordance with local and national electrical codes.
• Do not use more than 1 wire per connector terminal. Connector terminals are not rated for daisy-chain wiring.
• Maximum driver-to-LED light engine wire length for Constant Current Drivers:
Wire Gauge ØMaximum Lead Length
200 mA to 700 mA 710 mA to 1.50 A1.024 mm (18 AWG) 9 m 4.5 m1.29 mm (16 AWG) 10.5 m 7.5 m1.63 mm (14 AWG) 15 m 12 m2.05 mm (12 AWG) 30 m 18 m
Note: For wire gauges larger than Ø 1.29 mm (16 AWG), use external connector for connection with driver
1 Installer is responsible for ensuring that the driver case temperature does not exceed the maximum rated temperature.2 Models available with turn-on time ≤ 1 second.
Hi-lumeTM A-Series LTE – Japan
® SPECIF ICAT ION SUBMITTAL Page
Job Name:
Job Number:
Model Numbers:
LED Dimming Driver Architectural Dimming
369677e 3 08.07.2015
How to Build a Model Number: Hi-lume® A-Series
Case Style:S = Studded N = Non-Studded
Driver Output:C = Constant current driver with pulse width modulation (PWM) dimmingA = Constant current driver with constant current reduction (CCR) dimming
Current Level (for Constant Current):020 = 0.20 A; 021 = 0.21 A … 100 = 1.00 A … 150 = 1.50 A
Example: LTEA3D11KN-JA100For further assistance selecting your model number, contact Lutron Asuka at 03.5575.8411 (phone), 0120.083.417 (freephone), or [email protected]
LED Driver Output Range (see the following pages for more detail):Constant CurrentG = 0.20 A – 0.70 A 8 V – 20 VH = 0.20 A – 0.70 A 15 V – 38 VI = 0.71 A – 1.05 A 8 V – 20 VJ = 0.71 A – 1.05 A 15 V – 38 VK = 1.06 A – 1.50 A 8 V – 20 VL = 1.06 A – 1.50 A 15 V – 38 V
LTEA3D11K — – — — ———
Hi-lumeTM A-Series LTE – Japan
® SPECIF ICAT ION SUBMITTAL Page
Job Name:
Job Number:
Model Numbers:
LED Dimming Driver Architectural Dimming
369677e 4 08.07.2015
“G” Output Range, Current Driver Models
Driver Type Output Dimming Method Output Voltage Output Current Output Power Standards RecognitionConstant Current Driver (Class 2)
Pulse Width Modulation (PWM) 8 – 20 V 0.20 – 0.70 A 2 – 14 W HConstant Current Reduction (CCR)
Typical Performance Specifications:
Parameter Value Test ConditionsInput Current 186 mA ta = 25 °C,
0.70 A 14 W load, Max. Light Output, K enclosure 100 V~ without a control
Power Factor 0.99THD < 20% for loads greater than 10 WDriver Efficiency 76%
Effi
cien
cy (%
)
80
75
70
65
60
55
50
45
40
Driver Efficiency vs. Output Power at 100 V~
2 4 6 8 10 12 14Output Power (W)
0.20 A
0.35 A
0.50 A
0.70 A
Out
put V
olta
ge (V
)
60
50
40
30
20
10
0
Output Voltage vs. Output Current
0 0.35 0.7 1.05 1.4 1.75 2.1Output Current (A)
G
Out
put P
ower
(W)
40
35
30
25
20
15
10
5
0
Output Power vs. Output Current
0 0.35 0.7 1.05 1.4 1.75 2.1Output Current (A)
G
20 V Max.
8 V Min.
0.2
32
3
1.50.2
38
8
1.5
Current Driver Operation Range:
Hi-lumeTM A-Series LTE – Japan
® SPECIF ICAT ION SUBMITTAL Page
Job Name:
Job Number:
Model Numbers:
LED Dimming Driver Architectural Dimming
369677e 5 08.07.2015
“H” Output Range, Current Driver Models
Driver Type Output Dimming Method Output Voltage Output Current Output Power Standards RecognitionConstant Current Driver (Class 2)
Pulse Width Modulation (PWM) 15 – 38 V PWM0.20 – 0.70 A 3 – 26 W HConstant Current Reduction (CCR) 15 – 38 V-
Typical Performance Specifications:
Parameter Value Test ConditionsInput Current 325 mA ta = 25 °C,
0.70 A 26 W load, Max. Light Output, K enclosure 100 V~ without a control
Power Factor 0.99THD < 20% for loads greater than 10 WDriver Efficiency 80%
Effi
cien
cy (%
)
85
80
75
70
65
60
55
50
Driver Efficiency vs. Output Power at 100 V~
0 5 10 15 20 25 30Output Power (W)
0.20 A
0.45 A0.70 A
Out
put V
olta
ge (V
)
60
50
40
30
20
10
0
Output Voltage vs. Output Current
0 0.35 0.7 1.05 1.4 1.75 2.1Output Current (A)
H
Out
put P
ower
(W)
40
35
30
25
20
15
10
5
0
Output Power vs. Output Current
0 0.35 0.7 1.05 1.4 1.75 2.1Output Current (A)
H
38 V Max.
15 V Min.
0.2
32
3
1.50.2
38
8
1.5
Current Driver Operation Range:
Hi-lumeTM A-Series LTE – Japan
® SPECIF ICAT ION SUBMITTAL Page
Job Name:
Job Number:
Model Numbers:
LED Dimming Driver Architectural Dimming
369677e 6 08.07.2015
“I” Output Range, Current Driver Models
Driver Type Output Dimming Method Output Voltage Output Current Output Power Standards RecognitionConstant Current Driver (Class 2)
Pulse Width Modulation (PWM) 8 – 20 V 0.71 – 1.05 A 6 – 21 W HConstant Current Reduction (CCR)
Typical Performance Specifications:
Parameter Value Test ConditionsInput Current 268 mA ta = 25 °C,
1.05 A 21 W load, Max. Light Output, K enclosure 100 V~ without a control
Power Factor 0.99THD < 20% for loads greater than 10 WDriver Efficiency 78%
Effi
cien
cy (%
)
80
75
70
65
60
55
50
45
40
Driver Efficiency vs. Output Power at 100 V~
0 9 12 15 18 21 Output Power (W)
0.71 A1.05 A
Out
put V
olta
ge (V
)
60
50
40
30
20
10
0
Output Voltage vs. Output Current
0 0.35 0.7 1.05 1.4 1.75 2.1Output Current (A)
I
Out
put P
ower
(W)
40
35
30
25
20
15
10
5
0
Output Power vs. Output Current
0 0.35 0.71 1.05 1.4 1.75 2.1Output Current (A)
I
20 V Max.
8 V Min.
0.2
32
3
1.50.2
38
8
1.5
Current Driver Operation Range:
Hi-lumeTM A-Series LTE – Japan
® SPECIF ICAT ION SUBMITTAL Page
Job Name:
Job Number:
Model Numbers:
LED Dimming Driver Architectural Dimming
369677e 7 08.07.2015
“J” Output Range, Current Driver Models
Driver Type Output Dimming Method Output Voltage Output Current Output Power Standards RecognitionConstant Current Driver (Class 2)
Pulse Width Modulation (PWM) 15 – 38 V PWM0.71 – 1.05 A 11 – 32 W HConstant Current Reduction (CCR) 15 – 38 V-
Typical Performance Specifications:
Parameter Value Test ConditionsInput Current 400 mA ta = 25 °C,
1.05 A 32 W load, Max. Light Output, K enclosure 100 V~ without a control
Power Factor 0.99THD < 20%Driver Efficiency 80%
Effi
cien
cy (%
)
90
85
80
75
70
65
60
Driver Efficiency vs. Output Power at 100 V~
10 15 20 25 30 35 Output Power (W)
0.71 A 0.90 A
1.05 A
Out
put V
olta
ge (V
)
60
50
40
30
20
10
0
Output Voltage vs. Output Current
0 0.35 0.7 1.05 1.4 1.75 2.1Output Current (A)
J
Out
put P
ower
(W)
40
35
30
25
20
15
10
5
0
Output Power vs. Output Current
0 0.35 0.7 1.05 1.4 1.75 2.1Output Current (A)
J
38 V Max.
15 V Min.
32 V Max.
0.2
32
3
1.50.2
38
8
1.5
Current Driver Operation Range:
Hi-lumeTM A-Series LTE – Japan
® SPECIF ICAT ION SUBMITTAL Page
Job Name:
Job Number:
Model Numbers:
LED Dimming Driver Architectural Dimming
369677e 8 08.07.2015
“K” Output Range, Current Driver Models
Driver Type Output Dimming Method Output Voltage Output Current Output Power Standards RecognitionConstant Current Driver (Class 2)
Pulse Width Modulation (PWM) 8 – 20 V 1.06 – 1.50 A 9 – 30 W HConstant Current Reduction (CCR)
Typical Performance Specifications:
Parameter Value Test ConditionsInput Current 392 mA ta = 25 °C,
1.50 A 30 W load, Max. Light Output, K enclosure 100 V~ without a control
Power Factor 0.99THD < 20% for loads greater than 10 WDriver Efficiency 77%
Effi
cien
cy (%
)
80
75
70
65
60
55
50
45
40
Driver Efficiency vs. Output Power at 100 V~
0 11 13 15 17 19 21 23 25 27 29 Output Power (W)
1.06 A 1.20 A1.50 A
Out
put V
olta
ge (V
)
60
50
40
30
20
10
0
Output Voltage vs. Output Current
0 0.35 0.7 1.05 1.4 1.75 2.1Output Current (A)
K
Out
put P
ower
(W)
40
35
30
25
20
15
10
5
0
Output Power vs. Output Current
0 0.35 0.71 1.05 1.4 1.75 2.1Output Current (A)
K
20 V Max.
8 V Min.
0.2
32
3
1.50.2
38
8
1.5
Current Driver Operation Range:
Hi-lumeTM A-Series LTE – Japan
® SPECIF ICAT ION SUBMITTAL Page
Job Name:
Job Number:
Model Numbers:
LED Dimming Driver Architectural Dimming
369677e 9 08.07.2015
“L” Output Range, Current Driver Models
Driver Type Output Dimming Method Output Voltage Output Current Output Power Standards RecognitionConstant Current Driver (Class 2)
Pulse Width Modulation (PWM) 15 – 38 V PWM1.06 – 1.50 A 16 – 32 W HConstant Current Reduction (CCR) 15 – 38 V-
Typical Performance Specifications:
Parameter Value Test ConditionsInput Current 420 mA ta = 25 °C,
1.50 A 32 W load, Max. Light Output, K enclosure 100 V~ without a control
Power Factor 0.99THD < 20%Driver Efficiency 75%
Effi
cien
cy (%
)
90
85
80
75
70
65
60
Driver Efficiency vs. Output Power at 100 V~
15 17 19 21 23 25 27 29 31 33Output Power (W)
1.06 A1.20 A 1.50 A
Out
put V
olta
ge (V
)
60
50
40
30
20
10
0
Output Voltage vs. Output Current
0 0.35 0.7 1.05 1.4 1.75 2.1Output Current (A)
L Out
put P
ower
(W)
40
35
30
25
20
15
10
5
0
Output Power vs. Output Current
0 0.35 0.7 1.05 1.4 1.75 Output Current (A)
L
15 V Min.
32 V Max.
0.2
32
3
1.50.2
38
8
1.5
Current Driver Operation Range:
Hi-lumeTM A-Series LTE – Japan
® SPECIF ICAT ION SUBMITTAL Page
Job Name:
Job Number:
Model Numbers:
LED Dimming Driver Architectural Dimming
369677e 10 08.07.2015
K Case: Case Dimensions
K Case: Connector Location Dimensions
A 107 mmB 25 mmC 76 mmD 124 mmE 117 mm (mounting center)
F 36 mmG 51 mmH* 28 mmI* 51 mmJ* 41 mm
K* 8.3 mmL 16.5 mmM 19 mmN 44 mmO 34 mm
* Applies to studded K case only.
P 19 mmQ 8 mmR* 7 mm
A
C
ED
J*
B
F
G
H*
I*
PO
N
Q
K*
K*
L
M
Q
R*
L
8 – 32 Threaded Studs*
Hi-lumeTM A-Series LTE – Japan
® SPECIF ICAT ION SUBMITTAL Page
Job Name:
Job Number:
Model Numbers:
LED Dimming Driver Architectural Dimming
369677e 11 08.07.2015
K Case: Side Entry Connector Location Dimensions (Non-Studded)
S
U
V
T
S 35 mmT 16 mmU 22 mmV 39 mm
Hi-lumeTM A-Series LTE – Japan
® SPECIF ICAT ION SUBMITTAL Page
Job Name:
Job Number:
Model Numbers:
LED Dimming Driver Architectural Dimming
369677e 12 08.07.2015
Wiring Diagram for Forward Phase Control
1 Fixture and driver case must be grounded. 2 For maximum driver–to–LED light engine wire length, see chart in Driver Wiring and Mounting section.
Note: Colors shown correspond to terminal blocks on driver.
To Forward Phase Dimming Control
Dimmed Hot (Black)
Ground1 (Green)
Ground1Neutral (White) –V2 (Black)
Hi-lume® A-Series
+V2 (Red)
LED light engine
Hi-lumeTM A-Series LTE – Japan
® SPECIF ICAT ION SUBMITTAL Page
Job Name:
Job Number:
Model Numbers:
LED Dimming Driver Architectural Dimming
369677e 13 08.07.2015
Compatible Controls
• Guaranteed performance specifications with the controls listed in the chart below.• For assistance selecting controls, contact Lutron Asuka at 03.6866.8444 (phone), 0120.083.417 (freephone), or
Replacement PartsWhen ordering Lutron® replacement parts please provide the full model number. Contact Lutron Asuka if you have any questions.
Further InformationFor further information, please visit us at http://www.lutron.jp.You may contact Lutron Asuka at: 03.6866.8444 (phone), 0120.083.417 (freephone) or [email protected]