Top Banner
POLYETHYLENE PIPE SYSTEMS Civil Engineering
6
Welcome message from author
This document is posted to help you gain knowledge. Please leave a comment to let me know what you think about it! Share it to your friends and learn new things together.
Transcript
Page 1: HeplastPE

POLYETHYLENE PIPE SYSTEMSCivil Engineering

Page 2: HeplastPE

POLYETHYLENE PIPE SYSTEMS

Polyethylene is an established pipeline material for water, gas and industrial applications since it

pipe system with excellent properties such as corrosion resistance, chemical resistance and flexibility.

Benefits

Polyethylene pipe systems for low/high pressure applications

Cost saving with faster, easier installation.

Low operating and maintenance costs.

High corrosion resistance.

Good chemical resistance.

no loss of flow over time.

Easy, safe, cost-saving jointing techniques.

Fully fused jointing ensuring water-tight system.

The pipe system is fully end load resistant | No pull out even under severe ground movement.

Flexibility | Pipes can be coiled | Pipes can follow curving trenches | Faster installation | Less joints and connections | Resistance to ground movements | Welds can be made outside of the trench

Light weight | Easier and cheaper to transport | Easier (and safer) to handle on site | Easier to install – cost saving on global installation costs.

Modern materials: lifetime expectation calculated through ISO extrapolation method > 100 years ( water, 20°C ).

Recent materials are almost insensitive to external damages and can be installed in rough conditions.

Environmentally friendly materials, fully recyclable.

PE 80 | PE 100 | PE 100 RC pipesDrinking Water Supply

PE 80 | PE 100 | PE 100 RC pipesGas Supply

Heplast-pipe d.o.o., Kralja Zvonimira 38, HR-40323 Prelog, Croatia, Phone. +385 40 646 333, Fax. +385 40 645 420, [email protected], www.heplast-pipe.hrISO 9001 / ISO 14001 / HRN EN ISO/IEC 17025 / DVGW / ONORM EN

Page 3: HeplastPE

PRODUCT RANGE

Pressure Pipes

SDR 41S 20

SDR 33S 16

SDR 26S 12,5

SDR 21S 10

SDR 17,6S 8,3

SDR 17S 8

SDR 13,6S 6,3

SDR 11S 5

PE 80 c=1,25

PN 3,2 PN 4 PN 5 PN 6,3 PN 7,5 PN 8 PN 10 PN 12,5

PE 100c=1,25

PN 4 PN 5 PN 6,4 PN 8 PN 9,6 PN 10 PN 12,5 PN 16

d (mm) s (mm) s (mm) s (mm) s (mm) s (mm) s (mm) s (mm) s (mm)

20 - - - - - - 1,8 1,9

25 - - - - - 1,8 1,9 2,3

32 - - - - 1,8 1,9 2,4 2,9

40 - - 1,8 1,9 2,3 2,4 3,0 3,7

50 - 1,8 2,0 2,4 2,9 3,0 3,7 4,6

63 1,8 2,0 2,5 3,0 3,6 3,8 4,7 5,8

75 1,9 2,3 2,9 3,6 4,3 4,5 5,6 6,8

90 2,2 2,8 3,5 4,3 5,1 5,4 6,7 8,2

110 2,7 3,4 4,2 5,3 6,3 6,6 8,1 10,0

125 3,1 3,9 4,8 6,0 7,1 7,4 9,2 11,4

140 3,5 4,3 5,4 6,7 8,0 8,3 10,3 12,7

160 4,0 4,9 6,2 7,7 9,1 9,5 11,8 14,6

180 4,4 5,5 6,9 8,6 10,2 10,7 13,3 16,4

200 4,9 6,2 7,7 9,6 11,4 11,9 14,7 18,2

225 5,5 6,9 8,6 10,8 12,8 13,4 16,6 20,5

250 6,2 7,7 9,6 11,9 14,2 14,8 18,4 22,7

280 6,9 8,6 10,7 13,4 15,9 16,6 20,6 25,4

315 7,7 9,7 12,1 15,0 17,9 18,7 23,2 28,6

355 8,7 10,9 13,6 16,9 20,1 21,1 26,1 32,2

400 9,8 12,3 15,3 19,1 22,7 23,7 29,4 36,3

450 11,0 13,8 17,2 21,5 25,5 26,7 33,1 40,9

500 12,3 15,3 19,1 23,9 28,4 29,7 36,8 45,4

560 13,7 17,2 21,4 26,7 31,7 33,2 41,2 50,8

630 15,4 19,3 24,1 30,0 35,7 37,4 46,3 57,2

Heplast-pipe d.o.o., Kralja Zvonimira 38, HR-40323 Prelog, Croatia, Phone. +385 40 646 333, Fax. +385 40 645 420, [email protected], www.heplast-pipe.hrISO 9001 / ISO 14001 / HRN EN ISO/IEC 17025 / DVGW / ONORM EN

Page 4: HeplastPE

Product Details

Heplast polyethylene pipe systems manufactured from PE 80 or PE 100, or new class pf PE 100 with extremely high resistance to stress cracking and slow crack growth, can be used for both pressure and non pressure applications.

Heplast pipes are manufactured and tested under a Quality Management System that is certificated by independent institution against the requirements of ISO 9001 and ISO 14001.

Comprehensive quality control is undertaken in own Testing Laboratory, the only laboratory among Croatian pipe producers recognized in competency according to EN ISO/IEC 17025.

Raw materials and equipment are supplied by first-class European suppliers that guarantee high quality of processed products.

Product Range

HEPLAST PE pipes are available for

engineering and building industry.

Heplast-pipe d.o.o., Kralja Zvonimira 38, HR-40323 Prelog, Croatia, Phone. +385 40 646 333, Fax. +385 40 645 420, [email protected], www.heplast-pipe.hrISO 9001 / ISO 14001 / HRN EN ISO/IEC 17025 / DVGW / ONORM EN

PRODUCT DETAILS

Heplast-pipe Ltd. has been manufacturing polyethylene pipes since 1994. Since then Heplast has been at the forefront of materials and manufacturing technologies which has resulted in becoming the leading plastics pipe manufacturer in Croatia and region.

Heplast PE pipes are available for numerous applications including water supply, gas supply, wastewater drainage,

Technical specifications

All Heplast products comply with relevant ISO, EN, DIN and other technical standards to ensure reliability and long-lasting service.Technical specifications applied:

EN 12201-2, ISO 4427, DIN 8074 PE pipes for water supply

EN 1555-2, ISO 4437PE pipes for gas supply

Heplast-pipe operates a policy of continuous improvement. Additional products, technical specifications, testing equipment, testing methods and approvals may be added to those detailed. Up to date information is always available from the Technical Services Helpdesk.

EN 13244-2PE pipes for pressure sewage

EN 12666-1, ISO 8772PE pipes for non-pressure sewage

DIN 8074PE pipes for cable protection

EN 253PE pipes for district heating pipes (corona treated)

EN 1451-1PP pipes for indoor sewage

EN 13476, DIN 16961PP/PE corrugated pipes for non-pressureunderground drainage and sewerage

EN 13598-2PP/PE manholes, inspection chambers...

Applications

Diameters

DN 20 – DN 630 mmdepending on application.

Material

PE 80 PE 100PE 100 RC - HeavyDuty Pipes

Pipe Lenghts Pipes up to and including 110mm diameter are supplied in either straight bars or as coils, 125mm diameter pipe and above is supplied in straight bars of 12m lengths.

Supply of drinking water.Supply of gaseous fuels.Buried and above-ground pressure pipe systems for water for general purposes, drainage and sewerage.Non-pressure underground drainage and sewerage.Protection of optical, electrical and other cables. District Heating Pipes: corona treated PE pipes. Other industrial applications.

Page 5: HeplastPE

QUALITY ASSURANCE

All HEPLAST products are

manufactured and tested under a Quality Management System that is certificated by independent institutions against the requirements of ISO 9001 and ISO 14001.

Heplast-pipe has established and applies a Quality and Environmental Management System for the following scope of application: Development, Production and Sale of Thermoplastic Pipes and Accessories for Gas, Water and Sewerage.

The Quality Management System against the requirement of ISO 9001 has been established in 1996.

First certificates for products had been awarded almost immediately after the production started: Heplast PE pipes for gas and water supply are DVGW approved since 1995.

The Quality Management System against the requirement of ISO 14001 has been established in 2004.

Heplast-pipe Testing Laboratory has been accredited since 1998.

With an investment of more than 1 million EURO, Heplast-pipe Testing Laboratory incorporates the latest technology and know-how in technical testing and analysis.

Heplast-pipe Testing Laboratory is the only laboratory among Croatian pipe producers recognized in competency according to EN ISO/IEC 17025.

The manufacture and supply of thermoplastic pipe systems conforms all relevant ISO, EN, DIN and national technical specifications

Heplast-pipe d.o.o., Kralja Zvonimira 38, HR-40323 Prelog, Croatia, Phone. +385 40 646 333, Fax. +385 40 645 420, [email protected], www.heplast-pipe.hrISO 9001 / ISO 14001 / HRN EN ISO/IEC 17025 / DVGW / ONORM EN

Page 6: HeplastPE

Heplast-pipe d.o.o.

Kralja Zvonimira 38

HR-40323 Prelog

Croatia, Kroatien

Phone. +385 40 646 333

Fax. +385 40 645 420

[email protected]

www.heplast-pipe.hr

ISO 9001ISO 14001

Heplast-pipe Testing LaboratoryEN ISO/IEC 17025

ÖNORM EN 12201-2ÖNORM EN 13476-3

DVGW DW-8141AS2071DVGW DW-8136BU0260DVGW DG-8106AS2193DVGW DG-8111AS2194