HELINKS STS System Designer THE INCREDIBLE 10 MIN. …€¦ · With HELINKS STS System Designer We will create IEC61850 System Specification Description (SSD) System Configuration

THE INCREDIBLE 10 MIN. SUBSTATION

HELINKS STS System Designer

This is our incredible 10 Minutes substation

It is a 10 KV double busbar configuration

It has 2 segments, with 10 bays

With HELINKS STS System Designer

We will create IEC61850

System Specification Description (SSD)

System Configuration Description (SCD)

Draw Single Line Diagram

Instantiate and mapIEDs

Define Automation Functions

We will execute

the

following

engineering

tasks

We start with an empty canvas.

Then we create

The incredible 10 min. SubstationThe 10 KV Voltage Level

The drawing palette

contains all elements to

draw the substation

structure

The Library drawer of

the palette gives us

access to the library of

predefined bay

templates

We select two incoming

bays for the double bus bar

configuration

The bays are instantiated

from the library

We use the palette to add

the 2 double bus bar

segments and move the

incoming bays apart.

Again we use the bay

template library to add

feeder, transformer and

coupler bays.

On the left segment we

have some free space.

There we want to put a bus

coupler bay.

We draw this bay manually

by using conducting

equipment from the palette.

Finally we use the electrical connection

tool to connect the bay disconnectors to

the bus bar.

ElectricalConnectionTo BusBar

FUNCTION CONFIGURATOR

Primary Function Specification

A Function is implemented by a

collection of Logical Nodes, related

to the primary equipment and

connected with each other.

Example of the Disturbance Recording

Function

We open our

project file with the

Function

Configurator

The Function

Configurator

shows us a tree

view with elements

where it is

possible to add

functions.

We select

Functions from the

Library....

....and place them

in the substation

Logical Nodes of

the function are

automatically

allocated

IED ENGINEERINGSCL Expert

Instantiate IED

Assign IED to bay

Map Logical Node

Select an ICD File ...and instantiate IEDs

Assign IEDs on every level of your

structure with the IED Mapping Wizard

The Mapping Icon

shows you a

succsessful mapping.

The

specified

function

points to an

instance of

the IED

Finally use SCL Expert to

configure the communication and

other settings of your IED

IED

Logical Device

Logical Node

Services

Server Association TimeSynch File Transfer

Name Plate Health

Input Data

Reporting &Logging

GOOSE

Sampled Values

Output

Setting Group

AccessPoint

Data Set

The result of our work.....

SSD & SCD

Primary equipment

Electrical system topology

Electrical connections

Automation and protection

functions related to primary

equipment.

IED‘s

Data Type Templates

Communication Settings

Primary Equipment

AssociatedIED‘s

THE INCREDIBLE 10 MIN. SUBSTATION

for watching

Thank You !