HELICOPTER TECHNICAL TRAINING 4 Overhaul Course Information Course Description – Day Course The 4 Overhaul Initial Course is designed to meet the needs of a Maintenance Technician in overhauling the Bell 412 Series dynamic components. The course is an advaced course with a combination of theory and practical activities. Instructor Led Training Course Objectives: Special emphasis is placed on safety, component location, system normal and abnormal operation and indication, routine service / maintenance requirements and basic troubleshooting of the engine systems. FAA - Corse ID C-IND-IM-170504-K-010-001 Training Hours ........................... Approximately 120.00 Instructor Led Course Modules Hours IPreface............. ................................................. .2.00 ATA 62 Main Rotor............................................ .14.00 Technical Training Hours .................................120.00 Academic Course Modules Hours Total Hours ................................................ 120.00 Applicable Models: Bell 412 Basic/SP/HP/EP Approvals and Limitations FAA IA renewal Accepted Accredited for IA refresher training under Title 14 CFR part 65, § 65.93(a)(4) HTIGlobal LLC Fort Worth, Tx USA • +1-817-301-2659 • [email protected] Theory & Practical Training.................................114.00 Week #1 ATA 62 Main Rotor Control ................................16.00 ATA 63 Mast..........................................................6.00 ATA 63 Main Transmission............................. ....40.00 ATA 63 Main Driveshaft........................................8.00 ATA 65 Tail Rotor Drive System...........................4.00 ATA 64 Tail Rotor..................................................9.00 Week #2 Week #3 3 Exams................................................................. 6.00 ATA 65 42 G/B......................................................9.00 ATA 65 90 G/B......................................................9.00