Assembly & Installation Heckler AV ® MULTI MOUNT for iPad H526 2-Year Warranty Heckler Design warrants your product to be free from defect in material and workmanship for a period of two years from the original date of purchase. Electronic components are warranted to be free from defect for a period of one year from the original date of purchase. If you discover a defect, please contact [email protected]. Heckler Design will repair, at our discretion, using new or refurbished components. If repair is not possible, Heckler Design will replace the item. Compatible with iPad Air 1 iPad Air 2 iPad Pro 9.7-inch iPad (5th Gen) iPad (6th Gen)
Welcome message from author
This document is posted to help you gain knowledge. Please leave a comment to let me know what you think about it! Share it to your friends and learn new things together.
Transcript
Assembly & Installation
Heckler AV®
MULTI MOUNTfor iPad
H526
2-Year Warranty
Heckler Design warrants your product to be free from defect in material and workmanship for a period of two years from the original date of purchase. Electronic components are warranted to be free from defect for a period of one year from the original date of purchase. If you discover a defect, please contact [email protected]. Heckler Design will repair, at our discretion, using new or refurbished components. If repair is not possible, Heckler Design will replace the item.
Compatible with
iPad Air 1iPad Air 2iPad Pro 9.7-inchiPad (5th Gen)iPad (6th Gen)
1x
Ball-head hex assembly toolF628
2x
2x
Drywall achor
Drywall-mounting screw
F155
F360
1:1
PhillipsScrewdriver Power Drill
2x
Mullion-mounting screwsF486
1x
Foam adapter clips
F639
4x
Flat-head drywall-mounting screw
F108
One Enclosure, Multiple Installations
Install to drywall
Install to door mullions
ADA-friendly
Drywall, Straight
Drywall, Portrait
Drywall, Angled
Mullion, StraightADA-friendly
Mullion, Angled
1 Disassemble Multi Mount
Mullion Install
1
Loosen, do not remove.
3 Drill mounting + Ethernet cable holes
2 Mark mounting hole positions
2
Screw Selection: You may use any screw you see fit for mounting the product to the mullion.
If you choose to use the self-tapping mounting screws provided, we recommend drilling a pilot hole with a #17 drill bit or a 5/32-inch drill bit.
Ethernet Cable hole: If your Ethernet cable has an RJ45 connector installed, drill a 5/8 inch hole in the position shown. Consider using a step drill bit to drill these larger holes.
If you will install an RJ45 connector after the Ethernet cable is drawn through the mullion, a smaller hole can be created.
5 Remove mounting screws and route Ethernet cable
4 Form mounting hole threads
3
F486
F486
The mounting screws provided are thread-forming screws.
Adapter clips for iPad Air 2, iPad Pro 9.7-inch
6 Fasten mounting bracket to mullion
F486
F108
4
5
7 Charging options
8 Install iPad
Battery Bank Gigabit + PoE Adapter PoE Splitter (power only)
9 Install front bezel
6
10 Slide front bezel onto mounting bracket
Use fingers to help tighten screws
7
F628
11 Tighten assembly screws
x4
Loosen, do not remove.
Drywall Install
8
1 Slide front bezel onto mounting bracket
F639
F639
2 Install backplate to drywall
15º Angle Straight Angle
F360
F360 F360
Adapter clips for iPad Air 2, iPad Pro 9.7-inch
3 Charging options
Battery Bank Gigabit + PoE Adapter PoE Splitter (power only)
10
F108
4 Install iPad
11
5 Charging options
6 Slide front bezel onto mounting bracket
12
F628
7 Tighten assembly screws
x4
Use fingers to help tighten screws
Related Documents
