http://www.fischer.de/en/ - 12/01/2015 Heavy-duty anchor TA M-T High performance steel anchors 1 The installation-friendly push-through anchor for fixings in non- cracked concrete VERSIONS zinc-plated steel ▪ BUILDING MATERIALS Approved for: Concrete C20/25 to C50/60, non- cracked ▪ Also suitable for: Concrete C12/15 ▪ Natural stone with dense structure ▪ APPROVALS ADVANTAGES The optimised geometry minimises setting energy and allows for use in extremely narrow spaces. This allows for user-friendly installation. ▪ The three-part expansion sleeve creates even load distribution, thus allowing small edge and axial spacing. Thus the TA M-T is extremely flexible. ▪ The TA M-BP version with twist-off head hinders the dismantling of the fixture for use as a theft-deterrent and break-in protection. ▪ The detachable screw connection allows for surface flush removal. ▪ APPLICATIONS Steel constructions ▪ Handrails ▪ Consoles ▪ Ladders ▪ Cable trays ▪ Machines ▪ Staircases ▪ Gates ▪ Façades ▪ FUNCTIONING The TA M-T is suitable for push- through installation. ▪ When applying the torque, the cone is pulled into the expansion sleeve and expands it against the drill hole wall. ▪ The hexagonal head of the TA M-BP is tightened until it breaks off. ▪
This document is posted to help you gain knowledge. Please leave a comment to let me know what you think about it! Share it to your friends and learn new things together.
Transcript
http://www.fischer.de/en/ - 12/01/2015
Heavy-duty anchor TA M-T
Hig
h p
erf
orm
ance
ste
el a
nch
ors
1
The installation-friendly push-through anchor for fixings in non-
cracked concrete
VERSIONS
zinc-plated steel▪
BUILDING MATERIALS
Approved for:Concrete C20/25 to C50/60, non-cracked
▪
Also suitable for:Concrete C12/15▪Natural stone with dense structure▪
APPROVALS
ADVANTAGES
The optimised geometry minimisessetting energy and allows for use inextremely narrow spaces. Thisallows for user-friendly installation.
▪
The three-part expansion sleevecreates even load distribution, thusallowing small edge and axialspacing. Thus the TA M-T isextremely flexible.
▪
The TA M-BP version with twist-offhead hinders the dismantling of thefixture for use as a theft-deterrentand break-in protection.
▪
The detachable screw connectionallows for surface flush removal.
Thread Width across nut Washer (outer diameter x thick-
ness)
Sales unit
do l t fix M SW
Art.-No. ETA [mm] [mm] [mm] [mm] [mm] [pcs]Item gvz
TA M6 T/25 S 090267 ■ 10 80 25 M 6 10 18 x 1,6 50TA M8 T/25 S 090268 ■ 12 84 25 M 8 13 24 x 2 50TA M10 T/25 S 090269 ■ 15 100 25 M 10 17 30 x 2,5 25TA M12 T/25 S 090270 ■ 18 114 25 M 12 19 37 x 3 20
TECHNICAL DATA
Heavy-duty▪anchor▪TA M-T BP,▪with▪twist-off▪head
zinc-plated steel
Drill hole diameter
Anchor length Max. fixture thickness
Thread Width across nut Washer (outer diameter x thick-
ness)
Sales unit
do l t fix M SW
Art.-No. [mm] [mm] [mm] [mm] [mm] [pcs]Item gvz
TA M8 BP 090265 12 84 25 M 8 13 24 x 2 50
Non-cracked concreteType Effective
anchorage depthMin.
member thicknessInstallation
torquePermissibletensile load
Permissibleshear load
Min.spacing
Min.edge distance
hef hmin Tinst Nperm3) Vperm
3) smin2) cmin
2)
[mm] [mm] [Nm] [kN] [kN] [mm] [mm]
TA M6 T 40 100 10,0 3,6 3,3 80 50TA M8 T 45 100 20,0 5,7 6,7 90 60TA M10 T 55 110 40,0 9,5 11,0 110 70TA M12 T 70 140 75,0 11,9 17,0 160 120
Heavy-duty anchor TA M-THighest permissible loads for a single anchor1)▪in▪concrete▪C20/254)
1) The partial safety factors for material resistance as regulated in the approval as well as a partial safety factor for load actions of γL = 1,4 are considered. As an single anchor counts e.g. an an-chor with a spacing s ≥ 3 x hef and an edge distance c ≥ 1,5 x hef. Accurate data see approval.
2) Minimum possible axial spacings resp. edge distance while reducing the permissible load.3) For combinations of tensile loads, shear loads, bending moments as well as reduced edge
distances or spacings (anchor groups) see approval.4) For higher concrete strength classes up to C50/60 higher permissible loads may be possible.