Specifications and dimensions are for reference only and are subject to change without notice. Optional equipment may affect dimensions and weight. IDF-14 D 2,800,000 BTU/HR 14,000 CFM INDIRECT FIRED IDF-14 D HEATER SPECIFICATIONS Burner capacity Airflow Firing Fuel Gas Pressure Power Full Load Air Discharge 2,800,000 BTU/HR 14,000 CFM Indirect Fired, Forced Draft, Lo-Hi-Lo #1 & #2 Diesel Fuel, Natural Gas or Vapor Propane 2 PSI Minimum, Specify Available Gas and Pressure When Ordering Discharge Temp. Weight Dimensions 208-240 Vac / 3 Phase / 60 Hz 480 Vac / 3 Phase / 60 Hz 45A @ 240V / 3 Phase 23A @ 480V / 3 Phase 28” Diameter 200°F @ 0°F Ambient 9,400 Lbs. dry (varies based on configuration) 192” L x 95” W x 96” H without stack Models DO – Oil Burner, DG – Gas Burner and DGO – Duel Fuel, Gas and Oil C US C US STANDARD EQUIPMENT • Heavy Duty Welded Construction • Powerful Backward Inclined Blower • Artic Wiring Designed for -80°F • Service Panel with Indicator Lights for Heater Functions • Oil Field Skid with Fork Pockets • Stainless Steel Fire Tube • Heated Walk-in Burner/Blower Control Room with Lights • Fireye Flame Safety Control with Purge Cycle • Discharge Temperature Control with High Temp Shutdown • Air Proving Switch • Safety Disconnect Switch • Heavy Duty Fuel Filter (Oil Models) • 50’ Remote Thermostat OPTIONS • Duel Fuel (Gas and Oil) or Heavy Oil Burner • Side Mounted Fuel Tank • Vaporizer • High Pressure Gas Hose • Rigid or Flexible Ducting • Insulated and Non-Insulated Ducting • Specialty Paints and Coatings • Explosion Proof Thermostat • Various Voltages and Frequencies • Air Circulation Fans from 8,000 to 26,000 CFM 28"