Heads Up Display : A smart navigation system

Introduction Internet of things :

A lot of connected devices working together without the interruption of human. Like home automation where the user in summers need not switch on ac manually when he arrives home it will be switched on as soon as he opens the door.

My project : Heads up display

A display connected wirelessly to the internet showing navigation and traffic conditions on the windshield of a car in real time while driving.

Heads Up Display( transparent OLED based display)

Heads Up Display We have transparent

oled based display which shows the real time navigation and with speed limits and speed of the car ahead.

There is camera which will be mounted on front of the car which will take images and processor will process them in real time and the final display in shown on the display of the windshield.

Transparent OLEDThe substrate is transparent. When its off its up to 85 percent transparent. The oledtechnology helps us to make the display take the shape of the windshield. Its transparent behavior makes it he best choice for the project. Also it is environment friendly and most efficient than LEDs and LCDs. It has efficiency max up to 131lm/W. Which makes it a low powered device.

Trends Skully an intelligent helmet making company is

making smart helmets for riders. It was founded in 2013. But it has major drawbacks which didn’t make it a big success.

Skully Helmet

Difference that I would like to make it that, through real time image processing technique we not only give the user a proper direction to travel but also optimize the travel by letting the driver know the speed of the vehicle in front of it. Also give the user notification of his speed with fuel indication.

The new display will prevent the accidents which is a big case in my country. Many people face accidents and some even loose their life. This display will help prevent such cases. Also in case of some fault or accident the Module will notify the nearby hospital and send an SMS through GSM module to the relatives of the driver.

Helping the driver get maximum service needed.

Interest Areas My interest areas are intelligent navigation system, IoT, Smart

Cars etc.

After the accident of my parents, I’m working hard regularly to make projects to prevent such things in future to anyone.

Accidents are most unavoidable and uncontrolled thing that happens mostly because of the blind spot of the driver or the unawareness of the driver. This display will prevent such thing to happen in future.

I’m an electronic enthusiast working hard in the field of digital electronics.

If I have been provided internship in this area I would like to work on image processing, real time operating system, working with API’s of GPS navigation (like here maps and google maps) and also on OLED display.

I would like to work on Intel Atom Processor (Intel Galileo Board) with Wifi shield and an OLED display.

I have also participated in the Intel Embedded Design challenge 2014 in the field of IoT and have qualified till the semi finals.

I have experience on working with Arduino, ARM processors, Atmel’s AVR, Cypress’s PSoC board and Xilinx Spartan 3E FPGA board.