Head Screw Description Sizes Page - Star Drive Wood · PDF file3 Gold Star Multi Purpose Star Drive Wood Screws The Ultimate Multi Purpose Screw Gold Star yellow zinc coated screws

Our Star Drive provides twice the torque of Phillips or Square drive screws! Benefi ts include; Longer Bit Life, Reduced Camout, Reduced End Load, Virtually Eliminates Stripping and Fastener Damage!

AssortmentKits Page 12

Same DayShipping!

IncludesFree Bit!

January 2014

Bits & HoldersPage 13

New Metal to Metal Screws

Page 10

Head Screw Description Sizes Page

Bronze Star Exterior 3/4” to 6” 2

Bronze Star Exterior Trim Head 1-5/8” to 5” 2

Bronze Star Exterior Finish Head 1-5/8” to 3” 4

Gold Star Yellow Zinc Multipurpose 1” to 14” 3

Pocket Screws 1-1/4” to 1-1/2” 5

Gold Star Zinc Coated Cabinet 2-1/4” to 3” 5

Bronze Star Modifi ed Truss Head 1-1/4” to 2-1/2” 5

C-Deck Composite Deck Screws 2-3/4” 7

C-Deck Fascia, Fence & Rail 1-3/4” 7

Silver Star 305 Stainless Steel 1-1/2” to 4” 6

Silver Star 305 Stainless Trim Head 1-5/8” to 4” 6

Reamer Tek Wood to Steel 1-5/8” to 3-1/4” 10

Tapcon Masonry Screws 3/16” & ¼” x 3-1/4” 11

Cement Board Coated 1-1/4” to 1-5/8” 11

Phillips Drywall Screws 1-1/8” to 3” 11

4

10

11Gutter Screws CoatedStar Drive 7”

Bronze Star Construction Lag

1” to 16”

Also Available With White Head

Fine Thread Coarse Thread


Phillips

Screw Point Drill Point

Timber Hex Landscape, Timber, Log 4” to 14”

17 Colors Available Coated - 9 Colors Available Stainless Steel

5 Colors


Screw Products, Inc.9401 54th Ave NW, Bldg 1BGig Harbor, WA [email protected] Free: (877) 844-8880FAX: (253) 853-8881

2

Bronze Star Coated Star Drive ScrewsThe Ultimate Coated Screw! Bronze Star Corrosion-Resistant Star Drive Screws are for exterior construction applications. Excellent in: hardwood, softwood, chipboard and other tough materials. Accomplish more in less time & eliminate user fatigue with our Bronze Star’s key features. Type 17 pre-drilling auger, drag reducing knurled shoulder, self countersinking cutting nibs, proper thread length, maximum holding power and more! Great for all exterior purposes - decking, fencing, siding, and more!

BTX - Flat Head Wood Screws - #8 x 1-1/4” to #9 x 3”

Item Number

Size DriveSize

NetWt*

Carton Qty

5lb JarQty

1lb JarQty

BTX-0834 #8 x 3/4” T20 26.3 lbs 10,000 1905 381BTX-08100 #8 x 1” T20 34.9 lbs 10,000 1435 287BTX-08114 #8 x 1-1/4” T20 39.7 lbs 9,000 1156 231BTX-08112 #8 x 1-1/2” T20 33.8 lbs 6,500 982 197BTX-08134 #8 x 1-3/4” T20 23.5 lbs 4,000 851 170BTX-08200 #8 x 2” T20 23.7 lbs 3,500 763 153BTX-09200 #9 x 2” T25 25.6 lbs 3,000 588 118BTX-09212 #9 x 2-1/2” T25 26.5 lbs 2,500 470 94BTX-09234 #9 x 2-3/4” T25 22.9 lbs 2,000 426 85BTX-09300 #9 x 3” T25 25.2 lbs 2,000 394 79

HDB - Heavy Duty Flat Head Screws - #10 x 2” to 6”HDB2 #10 x 2” T25 26.4 lbs 2,500 484 97HDB212 #10 x 2-1/2” T25 25.9 lbs 2,000 395 79HDB3 #10 x 3” T25 22.8 lbs 1,500 322 65HDB312 #10 x 3-1/2” T25 18.5 lbs 1,000 278 56HDB104 #10 x 4” T25 20.7 lbs 1,000 244 49HDB105 #10 x 5” T25 19.3 lbs 750 195 39HDB106 #10 x 6” T25 18.5 lbs 600 164 33

THBTX - Trim Head Wood Screws - #9 x 1-5/8” to 5”

Item Number

Size DriveSize

NetWt*

Carton Qty

5lb JarQty

1lb JarQty

THBTX-09158 #9 x 1-5/8” T20 24.4 lbs 4,000 840 169THBTX-09200 #9 x 2” T20 22.1 lbs 3,000 678 136THBTX-09212 #9 x 2-1/2” T20 23.6 lbs 2,500 538 108THBTX-09300 #9 x 3” T20 22.7 lbs 2,000 428 86THBTX-09400 #9 x4” T20 23.1 lbs 1,500 326 66THBTX-09500 #9 x 5” T20 19.5 lbs 1,000 261 52The Following Have Painted White HeadsTHBTX-09158W #9 x 1-5/8” T20 23.8 lbs 4,000 845 169THBTX-09200W #9 x 2” T20 22.1 lbs 3,000 680 136THBTX-09212W #9 x 2-1/2” T20 23.3 lbs 2,500 540 108THBTX-09300W #9 x 3” T20 22.8 lbs 2,000 440 88

.32” - .38” Head Diameter

.24” Head Diameter

IncludesFree Bit!

Bronze Star CoatingOur SKT11 coating is

designed to protect against corrosive qualities of chemically pressure treated lumber. This

is a proprietary coating that has withstood over 1,200 hours of

salt spray conditions.

Screw Products, Inc. • Toll Free (877) 844-8880 • www.screw-products.com*Approximate Weight • 9401 54th Ave NW, Bldg 1B, Gig Harbor, WA 98332 • [email protected] • Jan 2014

3

Gold Star Multi Purpose Star Drive Wood ScrewsThe Ultimate Multi Purpose Screw Gold Star yellow zinc coated screws are an excellent multi purpose fastener! Coated with a triple dipped zinc coating, the Gold Star is for use in demanding industries using hard or soft woods. Excellent for chipboard and other tough materials. Removable and reusable for temporary applications! Gold Star’s proper thread length and superior holding power won’t back out like nails and also is self countersinking, self tapping and more! Our Star Drive offers twice the torque of Philips or square. Great for cabinetry, furniture, roofi ng, post and beam applications, log to log and more!

Yellow Zinc Coating Self Countersinking True Flat head

Cutting Nibs Extra Sharp Type 17

Auger Knurled Shank Hardened Steel

YTX - Flat Head Wood Screws - #8 x 1” to #9 x 3”

Item Number

Size DriveSize

NetWt*

Carton Qty

5lb JarQty

1lb JarQty

YTX-08100 #8 x 1” T20 36.4 lbs 10,000 1407 287YTX-08114 #8 x 1-1/4” T20 38.8 lbs 9,000 1135 277YTX-08112 #8 x 1-1/2” T20 33.7 lbs 6,500 977 196YTX-08134 #8 x 1-3/4” T20 23.9 lbs 4,000 844 170YTX-08200 #8 x 2” T20 23.8 lbs 3,500 796 160YTX-08212 #8 x 2-1/2” T20 20.7 lbs 2,500 595 120YTX-09200 #9 x 2” T25 26.2 lbs 3,000 573 115YTX-09212 #9 x 2-1/2” T25 26.3 lbs 2,500 466 94YTX-09234 #9 x 2-3/4” T25 23.1 lbs 2,000 424 85YTX-09300 #9 x 3” T25 25.7 lbs 2,000 394 79

HDY - Heavy Duty Flat Head Wood Screws - #10 x 1-1/2” to 6”

Item Number

Size DriveSize

NetWt*

Carton Qty

5lb JarQty

1lb JarQty

HDY112 #10 x 1-1/2” T25 23.0 lbs 3,000 652 131HDY2 #10 x 2” T25 25.9 lbs 2,500 487 98HDY212 #10 x 2-1/2” T25 25.5 lbs 2,000 384 77HDY3 #10 x 3” T25 23.4 lbs 1,500 334 67HDY312 #10 x 3-1/2” T25 18.1 lbs 1,000 280 56HDY104 #10 x 4” T25 20.5 lbs 1,000 246 50HDY105 #10 x 5” T25 19.4 lbs 750 194 39HDY106 #10 x 6” T25 18.5 lbs 600 163 33

Yellow Zinc Coating True Flat Head

Cutting Nibs Self Countersinking Hardened Steel

YTX - Extra Long Flat Head Wood Screws - #14 x 5” to #15 x 14”

Item Number

Size DriveSize

NetWt*

Carton Qty

5lb JarQty

1lb JarQty

YTX-14500 Head Diam.46” #14 x 5” T30 16.8 lbs 500 150 30YTX-14512 Head Diam.46” #14 x 5-1/2” T30 18.4 lbs 500 133 27YTX-14600 Head Diam.46” #14 x 6” T30 20.0 lbs 500 126 25YTX-14700 Head Diam.46” #14 x 7” T30 23.6 lbs 500 108 22YTX-14800 Head Diam.46” #14 x 8” T30 26.4 lbs 500 96 19YTX-15100 Head Diam.5” #15 x 10” T30 20.8 lbs 250 73 14 EachYTX-15120 Head Diam.5” #15 x 12” T30 24.8 lbs 250 EachYTX-15140 Head Diam.5” #15 x 14” T30 28.5 lbs 250 Each



IncludesFree Bit!


4

Bronze Star Coated Construction Lag ScrewsThe Ultimate Lag Screw! Our Construction Lag Screws are stronger and more durable than ordinary lag screws! The built-on round washer head gives a neat, fi nished appearance. Our triple dipped Bronze Star coating has shown over 1200 hours of corrosion resistance in treated lumber and salt spray tests! Our lags provide virtually no end load, reducing worker fatigue by the ease of drive, deep sharp threads, no pre-drilling and more! Great for ledger boards, heavy timber construction, rigid foam insulation panels, post and beam and more!

Great for ledger boards, heavy timber construc-

tion, rigid foam insulation panels, post and beam, bulkheads and more!

CCTX - 1/4” x Construction Lag - 1” to 6”

ItemNumber

Size DriveSize

NetWt*

CartonQty

100ct Jar/Box

50ct Jar/Box

OtherQty

CCTX-14100 1/4” x 1” T25 16.5 lbs 2,000 100 50 EachCCTX-14150 1/4” x 1-1/2” T25 16.9 lbs 1,500 100 50 EachCCTX-14200 1/4” x 2” T25 14.6 lbs 1,000 100 50 EachCCTX-14250 1/4” x 2-1/2” T25 13.3 lbs 750 100 50 EachCCTX-14300 1/4” x 3” T25 12.8 lbs 600 100 50 EachCCTX-14400 1/4” x 4” T25 13.7 lbs 500 100 50 EachCCTX-14500 1/4” x 5” T25 16.8 lbs 500 100 50 EachCCTX-14600 1/4” x 6” T25 15.8 lbs 400 100 50 EachCCTX - 5/16” x Construction Lag - 2” to 6”

CCTX-516200 5/16” x 2” T30 15.9 lbs 700 100 50 EachCCTX-516250 5/16” x 2-1/2” T30 16.1 lbs 600 100 50 EachCCTX-516300 5/16” x 3” T30 15.8 lbs 500 100 50 EachCCTX-516350 5/16” x 3-1/2” T30 18.4 lbs 500 100 50 EachCCTX-516400 5/16” x 4” T30 16.3 lbs 400 100 50 EachCCTX-516500 5/16” x 5” T30 17.5 lbs 350 100 50 EachCCTX-516600 5/16” x 6” T30 17.6 lbs 300 100 50 EachCCTX - 3/8” x Construction Lag - 7” to 16”

CCTX-38700 3/8” x 7” T40 20.9 lbs 250 100 50 EachCCTX-38800 3/8” x 8” T40 24.6 lbs 250 100 50 EachCCTX-381000 3/8” x 10” T40 29.4 lbs 250 100 50 EachCCTX-381200 3/8” x 12” T40 35.2 lbs 250 100 50 EachCCTX-381400 3/8” x 14” T40 40.6 lbs 250 100 50 EachCCTX-381600 3/8” x 16” T40 46.1 lbs 250 100 50 Each

1/4” nominal1/2” Head Diam.



IncludesFree Bit!

ICC-ESR #:

Bronze Star Coated Finish Head ScrewsFSC - Finish Head Wood Screws - #7 x 1-5/8” to 3”

Item

NumberSize Drive

SizeNetWt*

Carton Qty

5lb JarQty

1lb JarQty

FSC7158 #7 X 1-5/8” T10 24.3 lbs 5,500 1014 203FSC72 #7 X 2” T10 21.9 lbs 4,000 871 175FSC7212 #7 X 2-1/2” T10 21.3 lbs 3,000 706 142FSC73 #7 X 3” T10 20.8 lbs 2,500 591 118The Following Have Painted White HeadsFSC7158W #7 X 1-5/8” T10 24.3 lbs 5,500 1099 221FSC72W #7 X 2” T10 21.9 lbs 4,000 859 173FSC7212W #7 X 2-1/2” T10 21.3 lbs 3,000 711 143FSC73W #7 X 3” T10 20.8 lbs 2,500 589 118


IncludesFree Bit!

5

CTX - #7 x Star Drive Pocket Screws (Coarse & Fine Thread)The Ultimate Pocket ScrewStar Drive Pocket screws available in coarse or fi ne thread. Works excellent with Kreg Jig® applications and more! Their professional bronze lube fi nish is perfect for interior applications. Coarse is the perfect fi t for any softwood applications and fi ne for all hardwood uses. These screws virtually drive themselves with benefi ts like a type 17 extra sharp point, deep wide sharp & more! 7x1-1/4 or 7x1-1/2” available.

Item Number

Size DriveSize

NetWt*

Carton Qty

5lb JarQty

1lb JarQty

CTX7114C #7 X 1-1/4” T20 30.7 lbs 6,000 980 196CTX7114F #7 X 1-1/4” T20 31.0 lbs 6,000 960 192CTX7112C #7 X 1-1/2” T20 35.2 lbs 6,000 854 170CTX7112F #7 X 1-1/2” T20 35.5 lbs 6,000 826 166


Great For Kreg Jig®

IncludesFree Bit!

Exterior & Interior Star Drive Cabinet ScrewsOur cabinet screws are the pros choice! Their extra deep star drive, built on round washer head, self tapping point, and superior strength gives them the ability to virtually drive themselves. Available for projects indoors and out! Modifi ed Truss, Cabinet and Pocket Screws available.

CCTX - Bronze Star Exterior Modifi ed Truss Head Screws - #7 x 1-1/4” to 2-1/2”Our Modifi ed Truss head screws are the perfect star drive; leaving you with a clean, professional fi nish that’s easy to accomplish!! Let them help you complete countless jobs like hanging trellis, windows and cabinets! Excellent for exterior and interior use with 1200 salt spray tested coating!

Item Number

Size DriveSize

NetWt*

Carton Qty

5lb JarQty

1lb JarQty

CCTX-7114 #7 x 1-1/4” T15 18.9 lbs 4,000 1082 217CCTX-7158 #7 x 1-5/8” T15 17.2 lbs 3,000 916 183CCTX-7200 #7 x 2” T15 13.5 lbs 2,000 732 147CCTX-7212 #7 x 2-1/2” T15 13.1 lbs 1,500 573 115CTX - Gold Star Yellow Zinc Coated Cabinet Screws - #10 x 2-1/4” to 3”

Our #10 cabinet screws are milled with a heavy shank to give your cabinets the structural integrity they deserve! Great for interior use their triple dipped yellow zinc or white head provides a professional fi nish! They require no end load, so those over the head jobs are a cinch! Great bit to head contact- your screw will stay put!White Head Available

Item Number

Size DriveSize

NetWt*

Carton Qty

5lb JarQty

1lb JarQty

CTX-10214 (No Type 17) #10 x 2-1/4” T25 25.5 lbs 2,000 388 77CTX-10212 #10 x 2-1/2” T25 27.6 lbs 2,000 362 73CTX-10300 #10 x 3” T25 24.2 lbs 1,500 312 63CTX-10212W (White Head) #10 x 2-1/2” T25 27.6 lbs 2,000 359 72CTX-10300W (White Head) #10 x 3” T25 24.2 lbs 1,500 311 62

IncludesFree Bit!

IncludesFree Bit!

1/2” Head Diameter



6

Silver Star 305 Stainless Steel Star Drive ScrewsThe Ultimate In Corrosion Resistance!Silver Star 305 stainless steel screws for use with all chemically treated materials, coastal applications and all applications which are exposed to weather, high moisture, and other caustic conditions. Manufactured from the fi nest stainless steel alloys, it’s unaffected by tannic acid and other extractives found in cedar and redwood. Experience our ease of drive with benefi ts such as a self taping type 17 augur, cutting nibs, knurl and more. Great for seacoast applications, docks, decking, fencing and any application where the most resistance to corrosion is needed.

SSTX - Flat Head 305 Stainless Steel Wood Screws #8 x 1-1/4” to #10 x 4”

Item Number

Size DriveSize

NetWt*

Carton Qty

5lb JarQty

1lb Jar Qty

SSTX-08114 #8 x 1-1/4” T20 40.5 lbs 9,000 1119 224SSTX-08112 #8 x 1-1/2” T20 35.3 lbs 6,500 979 196SSTX-08200 #8 x 2” T20 25.0 lbs 3,500 738 148SSTX-09158 #9 x 1-5/8” T25 27.1 lbs 4,000 748 150SSTX-09200 #9 x 2” T25 24.5 lbs 3,000 616 124SSTX-09212 #9 x 2-1/2” T25 23.8 lbs 2,500 500 100SSTX-09300 #9 x 3” T25 23.4 lbs 2,000 427 82SSTX-10212 #10 x 2-1/2” T25 24.8 lbs 2,000 415 83SSTX-10300 #10 x 3” T25 22.0 lbs 1,500 338 68SSTX-10312 #10 x 3-1/2” T25 17.0 lbs 1,000 296 60SSTX-10400 #10 x 4” T25 19.4 lbs 1,000 263 53SSTH - Trim Head 305 Stainless Steel Wood Screws #9 x 1-5/8” to 4”

Item Number

Size DriveSize

NetWt*

Carton Qty

5lb JarQty

1lb Jar Qty

SSTH-09158 #9 x 1-5/8” T20 24.1 lbs 4,000 846 170SSTH-09214 #9 x 2-1/4” T20 20.4 lbs 2,500 615 124SSTH-09212 #9 x 2-1/2” T20 22.7 lbs 2,500 554 111SSTH-09300 #9 x 3” T20 21.7 lbs 2,000 457 92SSTH-09400 #9 x 4” T20 22.7 lbs 1,500 351 70



IncludesFree Bit!

C-Deck #10 x 2-3/4” Star Drive Stainless Steel Deck ScrewsThe Ultimate Composite Deck Screw! Our C-Deck Composite Deck Screws are for use with wood, composite, PVC and other plastic materials. Our Stainless Steel C-Deck screws are available in 10 colors that will match most common

deck colors on the market and has shown over 1000 hours of resistance in salt spray tests! Our C-deck is specially designed to eliminate the mushrooming and blemishes that can occur in composite materials.

SSCD234 - C-Deck - 305 Stainless St. - #10 x 2-3/4” (Color Approximate)Item

NumberSize Drive

SizeNet Wt*

1750ct Bucket

350ctJar

75ctJar

SSCD234 Stainless #10 x 2-3/4” T20 22.5 lbs 1750 350 75SSCD234TTC Cedar #10 x 2-3/4” T20 22.5 lbs 1750 350 75SSCD234FP Fire Pit #10 x 2-3/4” T20 22.5 lbs 1750 350 75SSCD234FT Flint #10 x 2-3/4” T20 22.5 lbs 1750 350 75SSCD234GP Gravel Path #10 x 2-3/4” T20 22.5 lbs 1750 350 75SSCD234SR Sand Ridge #10 x 2-3/4” T20 22.5 lbs 1750 350 75SSCD234TK Teak #10 x 2-3/4” T20 22.5 lbs 1750 350 75SSCD234TH Tree House #10 x 2-3/4” T20 22.5 lbs 1750 350 75SSCD234VL Vintage Lantern #10 x 2-3/4” T20 22.5 lbs 1750 350 75SSCD234WN Walnut #10 x 2-3/4” T20 22.5 lbs 1750 350 75

IncludesFree Bit!

Approved For Trex!



7

C-Deck #10 x 2-3/4” Star Drive Coated Composite Deck ScrewThe Ultimate Composite Deck Screw! Available in ACQ Compatible Coated and 305 Stainless Steel. Our C-Deck Composite Deck Screws are for use with wood, composite, PVC and other plastic materials.Our e-coat screws are

available in 17 colors that will match most common deck colors on the market and has shown over 1000 hours of resistance in salt spray tests! Our C-deck is specially designed to eliminate the mushrooming and blemishes that can occur in composite materials.

CD234 C-Deck - #10 x 2-3/4” (Color Approximate)Item

NumberSize Drive

SizeNet Wt*

1750ct Bucket

LargeJar

SmallJar

CD234DB Desert Bronze #10 x 2-3/4” T20 19 lbs 1750 350 75CD234FP Fire Pit #10 x 2-3/4” T20 19 lbs 1750 350 75CD234FT Flint #10 x 2-3/4” T20 19 lbs 1750 350 75CD234GP Gravel Path #10 x 2-3/4” T20 19 lbs 1750 350 75CD234MC Mountain Cedar #10 x 2-3/4” T20 19 lbs 1750 350 75CD234RB Rustic Bark #10 x 2-3/4” T20 19 lbs 1750 350 75CD234ROW Rosewood #10 x 2-3/4” T20 19 lbs 1750 350 75CD234RR River Rock #10 x 2-3/4” T20 19 lbs 1750 350 75CD234RW Redwood #10 x 2-3/4” T20 19 lbs 1750 350 75CD234SR Sandridge #10 x 2-3/4” T20 19 lbs 1750 350 75CD234TH Tree House #10 x 2-3/4” T20 19 lbs 1750 350 75CD234TK Teak #10 x 2-3/4” T20 19 lbs 1750 350 75CD234TTC Cedar #10 x 2-3/4” T20 19 lbs 1750 350 75CD234TTG Gray #10 x 2-3/4” T20 19 lbs 1750 350 75CD234VL Vintage Lantern #10 x 2-3/4” T20 19 lbs 1750 350 75CD234WH White #10 x 2-3/4” T20 19 lbs 1750 350 75CD234WN Walnut #10 x 2-3/4” T20 19 lbs 1750 350 75

SSCD234 - C-Deck - 305 Stainless St. - #10 x 2-3/4” (Color Approximate)SSCD234 Stainless #10 x 2-3/4” T20 22.5 lbs 1750 350 75SSCD234TTC Cedar #10 x 2-3/4” T20 22.5 lbs 1750 350 75SSCD234FP Fire Pit #10 x 2-3/4” T20 22.5 lbs 1750 350 75SSCD234FT Flint #10 x 2-3/4” T20 22.5 lbs 1750 350 75SSCD234GP Gravel Path #10 x 2-3/4” T20 22.5 lbs 1750 350 75SSCD234SR Sand Ridge #10 x 2-3/4” T20 22.5 lbs 1750 350 75SSCD234TK Teak #10 x 2-3/4” T20 22.5 lbs 1750 350 75SSCD234TH Tree House #10 x 2-3/4” T20 22.5 lbs 1750 350 75SSCD234VL Vintage Lantern #10 x 2-3/4” T20 22.5 lbs 1750 350 75SSCD234WN Walnut #10 x 2-3/4” T20 22.5 lbs 1750 350 75

IncludesFree Bit!

Approved For Trex!

CD134 - C-Deck Fascia, Fencing & Railing Star Drive ScrewsThe Ultimate Fascia Screw!C-Deck Star Drive Fascia Screws are for use with fascia, fencing and railing applications. Stocked in 5 colors, red, tan, gray, brown and recently added- white. Our coating is treated lumber compatible. These screws feature a #9x1-3/4” length, have reverse threads to eliminate most composite mushrooming, quick starting point and their deep wide sharp threads provide the maximum holding power.

Item Number

Size DriveSize

NetWt*

Carton Qty

5lb JarQty

1lb JarQty

CD134R Red #9 x 1-3/4” T20 23.6 lbs 3,500 744 149CD134G Gray #9 x 1-3/4” T20 23.6 lbs 3,500 744 149CD134T Tan #9 x 1-3/4” T20 23.6 lbs 3,500 744 149CD134B Brown #9 x 1-3/4” T20 23.6 lbs 3,500 744 149CD134W White #9 x 1-3/4” T20 23.6 lbs 3,500 744 149

Includes Free Bit!




8

DeckLok - THE Deck Bracket System Stay Connected With A Lateral Anchor!DeckLok – The Original Lateral Anchor System – is revolutionizing the decking industry. The patented DeckLok system will provide a bolted connection at all critical structural locations of your deck. A single pair of DeckLok brackets will provide 4000 lbs of pull out resistance. DeckLok will also increase rail post connections by up to 500%. Great for the deck to the ledger connection, stair stringer, rail post and more. You NEED DeckLok to meet code! Made in USA.

Item Number Description Net Wt

DL316SS 316 Stainless Steel Lateral Anchor 0.9 lbsDLHDG Hot Dip Galvanized Lateral Anchor 0.9 lbs

RailLok - The Railing & Fence Section ConnectionRailLok is used to connect fence sections to the rail post. Attach the brackets to the rail post using included screws and then slip pre-assembled fence sections into the brackets and screw them in place. The RailLok brackets provide a strong, reliable fence section to post connection. The brackets are built to outlast the service life of the railing and fence sections. Made in USA.

Item Number Description Net WtRLBLK Black RailLok Bracket (Includes 5 Star Drive Screws) 0.2 lbsRLWHT White RailLok Bracket (Includes 5 Star Drive Screws) 0.2 lbsRL316 316 Stainless RailLok Bracket (Includes 5 Star Drive Screws) 0.2 lbs

• DeckLok™ is the Only Anchoring System Specifi cally Designed and Patented for Lateral Loads with Other Patents Pending

• For Use with Lumber or Engineered Flooring Systems • Use with Standard 1/2” Hot-Dipped Galvanized or SS Bolts• Code Compliant Hot-Dipped Galvanized or 316 Stainless

Steel• Easy to Install on Existing Structures or New Construction• One Pair of DeckLok™ Lateral Anchors Provides Up To 4,000

lbs. of Pullout Resistance• For Use with Lumber or Engineered Flooring Systems • DeckLok™ is on of the most Cost Effective Way to

Consistently Build a Safe and Secure Deck and Guardrail System

• ICC-ESR 2114

Features & Benefi ts


9

D2W Deck2Wall SpacersDesigned to easily and effi ciently provide airspace between buildings and deck ledgers, stair stringers, shade structures, railing posts, fence posts, and more to help prevent rot. Deck2Wall Spacers™ are easy to install, simply fasten the spacer to the ledger with properly sized screws or nails through the attachment holes prior to bolting the ledger to the structure. The large diameter of the Deck2Wall Spacers™ will provide greater bearing surface than standard washers. See www.screw-products.com for more info!

Item # Description Net Wt (10)D2W Deck2Wall Spacer 2 1/2” 0.7lbsD2W38 Deck2Wall Spacers 2” 0.4lbs

Least labor intensive hidden

deck fastener Holds deck more effectively

than plastic clips Black marine grade

aluminum clip Includes black stainless

steel star drive screws No drilling. No glue.

No hassle.

Item Number Description Net Wt PackageDC175 Deck Clip System 3.5 lbs 1 PackDCPlugs Package of 50ct Hole Plugs

Fast Easy Installation!Anyone can install The Ultimate Hidden Deck Fastener. No special tools are needed if using grooved decking, only a good drill with an adjustable clutch. If your decking is not grooved, you will need a biscuit jointer to make a slot in the edge of the boards above every joist to accept the clips. One clip is installed on every joist.

We installed a 12 x 20 grooved deck with inexperienced help in 5 1/2 hours. Two persons installed decking and one person cut boards to length. No screws stripped out, no messy adhesives were needed and the only drilling was on the starter and fi nisher boards ! The end result? One beautiful deck! In fact, if you are a contractor, you can expect The Ultimate Hidden Deck Fastener to install about as fast as drilling and face fastening every board!

Why Choose The Ultimate Hidden Deck Fastener?Installing hardwood, composite or synthetic decking with blind fasteners presents plenty of challenges. With The Ultimate Hidden Deck Fastener there is no predrilling, messy adhesives, screws pulled thru the clips, or broken screws and drivers. Rounded edges ease installation and the lobes on the bottom grip the board and allow movement both ways. You will be amazed at how tight The Ultimate Hidden Deck Fastener holds your decking.

Why Is The Ultimate Hidden Deck Fastener Special?Extruded out of 6063T5 aluminum, The Ultimate Hidden Deck Fastener’s unique shape allows it to grab and hold both sides of the decking and acts both as a guide and a miniature spring, keeping your decking aligned and tight forever. This innovative and patent pending design works excellently with all types of Hardwood, Cedar, Redwood, Composite, PVC and Synthetic Decking; pre-grooved or in biscuit jointer slots.

Each unit contains: • (175) Clips • (175) 2-1/4” Star Drive Screws • (10) 2-1/4” starter & fi nisher screws

• Hard Wood Plugs• (1) T20x2 Driver • Instructions

When using 5-1/2” wide decking, each jar will install 100 square feet ofdecking on 16” centers, or 150 square feet on 24” centers.

The Ultimate Hidden Deck FastenerThe Ultimate Hidden Deck Fastener All-In-One System! Milled with a marine grade aluminum clip and paired with a star drive black coated 305 stainless steel screw. Our clip requires no drilling, glue and is the easiest on the market to install! The aluminum clip holds decks more effectively than plastic clips and it’s literally out of sight!


10

M2M Metal To Metal ScrewsM2M - The Ultimate Metal to Metal Screw! NEW!! Our M2M Metal to Metal screw is the perfect option for getting through that heavy gauge steel! Great for metal joists and any job where metal to metal joinery is needed! It’s advanced Tek, quadrex drive & superior strength make this screw a sure win! Use a #2 square. 16 threads per inch. • # 3 Point • Drilling capacity 0.110 (12 gauge) – 0.179 (7 gauge) • Application: low profi le design provides added clearance for standing seam roof or a concealed fastener panel system • Suggested Tool: Electric Screwgun (1800-2500 RPM) with depth sensitive nose piece. .45” Head Diameter

Item Number Size Drive NetWt*

CartonQty

Lge JarQty

Med JarQty

Sml JarQty

M2MQC-101634 10-16 x 3/4” #2 Sq 46.9 lbs 7500 1000 500 100Includes Free Bit!

.445” Head DiameterTimber Hex Exterior 5/16” Hex Head Screws - 4” to 14”Superior Alternative to Spikes - Timber Hex Timber and Landscape Hex Drive Screws are a 5/16” head & are reusable! They’ll install faster and have much greater holding power over traditional timber and landscaping spikes. Great for landscaping timbers connections, log homes, and other exterior applications.

Item Number Size Drive Net Wt* Bulk Jar Other

TH4 #14 x 4” 5/16” Hex 9.3 lbs 250 50 EachTH6 #14 x 6” 5/16” Hex 13.5 lbs 250 50 EachTH8 #14 x 8” 5/16” Hex 17.1 lbs 250 50 EachTH10 #14 x 10” 5/16” Hex 21.5 lbs 250 50 EachTH12 #14 x 12” 5/16” Hex 25.5 lbs 250 50 EachTH14 #14 x 14” 5/16” Hex 29.4 lbs 250 50 EachTHG4 Gray #17 x 4” 5/16” Hex 13 lbs 250 50 EachTHG5 Gray #17 x 5” 5/16” Hex 16.44 lbs 250 50 EachTHG6 Gray #17 x 6” 5/16” Hex 18.5 lbs 250 50 EachTHG7 Gray #17 x 7” 5/16” Hex 22.01 lbs 250 50 EachTHG9 Gray #17 x 9” 5/16” Hex 27.67 lbs 250 50 EachTHG11 Gray #17 x 11” 5/16” Hex 33.46 lbs 250 50 Each

5/16” Hex Head.49” Washer Diam.

IncludesFree Bit!

ICC-ESR #:


FHD Reamer Tek Wood To Steel Star Drive ScrewsThe Ultimate Wood To Steel Screw!Reamer Tek Wood to Steel screws are White Zinc Coated. For specialized applications specifi cally fastening wood to steel or aluminum. They have an advanced design that makes even the hardest jobs accomplished in less time, less money and less fatigue! Self-drilling wings will break off once they reach contact with steel or Aluminum. Milled with heat treated hardened steel! Ideal For Truck beds, Trailer decks / beds, Horse trailers, Snowmobile trailers, 4wheeler trailers and more!

Item Number

Size DrillPoint

HeadDiam

DriveSize

ThreadLength

Net Wt*

Carton Qty

FHD10158 #10-16 x 1-5/8” #3 .38” T25 1-1/16" 34.3 lbs 4,000FHD12200 #12-24 x 2” #4 .42” T25 1-1/8" 29.5 lbs 2,000FHD12212 #12-24 x 2-1/2” #4 .42” T25 1-3/5" 28.1 lbs 1,500FHD14234 #14-20 x 2-3/4” #4 .461” T30 1-7/8" 28.1 lbs 1,000FHD14314 #14-20 x 3-1/4” #4 .461” T30 2-3/8" 33.1 lbs 1,000

Drilling Capacity

FHD10158 #10-16 x 1-5/8” 7/8" Wood to .175 MetalFHD12200 #12-24 x 2” 9/10" Wood to .210 MetalFHD12212 #12-24 x 2-1/2” 1-3/8" Wood to .210 MetalFHD14234 #14-20 x 2-3/4” 1-5/8" Wood to .250 MetalFHD14314 #14-20 x 3-1/4” 2-1/8" Wood to .250 Metal

Includes Free Bit!

11

Tapcon Masonry Screws (Phillips) 100ct Box

Tapcon Masonry Phillips Head Screws milled with a Blue Climaseal ® Coating for longer life. Fast and Easy installa-tion, Removable, and Advanced Threadform Technology requires less torque resulting in less end user fatigue. Great for securing all applications to concrete.

Item Number Size Drive Net Wt* Carton

PFH3314 3/16 x 3-1/4” Phillips 1.6 lbs (includes 5/32” Drill Bit) 100

PFH4314 1/4 x 3-1/4” Phillips 2.8 lbs (includes 3/16” Drill Bit) 100

3/16” Screw HeadDiameter .35”

1/4” Screw HeadDiameter .454”

7” Gutter Screws, Ceramic Coated Star DriveGutter Screw Ceramic Coated Star Drive Screws in brown or white fi nish, #14 x 7”. Use T-30 bit. Conveniently packed in a reusable 250 piece pail, 50ct box and individually. Includes one Free Bit. Treated lumber compatible.

Item Number Size Drive NetWt*

CartonQty

JarQty

OtherQty

GTR147B Brown #14 x 7” T30 13.9 lbs 250 50 EachGTR147W White #14 x 7” T30 13.9 lbs 250 50 Each


IncludesFree Bit!

Ceramic Coated Star Drive Cement Board ScrewsCement Board Ceramic Coated Star Drive Screws, Use T25 bit - conve-niently packed in reusable containers. Deep sharp threads with a sharp point. Includes one Free Bit. Great for use with all cement boards. Treated lumber compatible.

ItemNumber

Size DriveSize

NetWt*

CartonQty

5lb JarQty

1lb JarQty

CB114S (Sharp Point) #8 x 1-1/4” T25 29.5 lbs 5,000 834 168

CB158S (Sharp Point) #8 x 1-5/8” T25 28.0 lbs 4,000 670 134CB8114D (Drill Point) #8 x 1-1/4” T25 27.9 lbs 5,000 725 146CB8158D (Drill Point) #8 x 1-5/8” T25 28.7 lbs 4,000 902 181

IncludesFree Bit!


Phillips Bugle Head Drywall ScrewsOur drywall screws have a bugle head to prevent tearing, a phosphate coating to help resist corrosion, and a phillips drive recess. They are excellent for wall board, drywall, plaster board, sheet rock, gypsum board, and other materials.

Item Number Size 50lbBox Qty

Bulk PailWeight

BulkPail Qty

5lbJar Qty

1lbJar Qty

DW-6118F 6 X 1-1/8" 13,800 36.2 lbs 10,000 1,380 276DW-6114C 6 X 1-1/4'' 12,900 31.0 lbs 8,000 1,290 258DW-6158C 6 X 1-5/8'' 10,050 27.4 lbs 5,500 1,005 201DW-8200C 8 X 2'' 6,750 25.9 lbs 3,500 675 135DW-8212C 8 X 2-1/2'' 5,300 23.6 lbs 2,500 530 106DW-8300C 8 X 3'' 4,450 28.1 lbs 2,000 445 89

IncludesFree Bit!

Easy DrywallInstallation!



12

Star Drive Assortment Kits!These economical and compact assortment kits are the perfect accessory for your home, garage or workshop (they also make wonderful gifts!). Fully loaded, these take anywhere kits are easy to carry, slim enough to fi t just about any place you need and are available in several varieties for different purposes.

Each Kit Comes With: Assortment of Star Drive Screws Adjustable Organizer Stainless Steel Magnetic Bit Holder Stainless Steel Quick Release Magnetic Bit Holder Bonus! We’ll throw in drive bits - see each kit for details!!

Includes:Screws

Adjustable OrganizerFree Bits

Magnetic Bit Holders

See Complete Details at www.screw-products.com

All kits include: Adjustable Organizer (1) Stainless Steel Magnetic Bit Holder (1) Stainless Steel Quick Release Magnetic Bit Holder Bonus! We’ll throw in FREE drive bits listed with each kit!#BAK - Bronze Star Exterior Star Drive Wood Screw Assortment Kit Net Wt* 4.9 lbs

#YAK - Gold Star Interior Multi-purpose Gold Star Drive Wood Screw Assortment Kit Net Wt* 3.9 lbs

• (50) 8 x 1-1/4” • (40) 8 x 1-1/2” • (35) 8 x 1-3/4” • (35) 9 x 2” • (40) 9 x 2-1/2” • (40) 9 x 2-3/4”

• (40) 9 x 3” • (35) 10 x 2-1/2” • (40) 10 x 3” • (35) 10 x 3-1/2” • (35) 10 x 4”

Standard - YTX• (50) 8 x 1” • (50) 8 x 1-1/4” • (40) 8 x 1-1/2” • (30) 8 x 1-3/4” • (35) 8 x 2”

• (35) 8 x 2-1/2” • (40) 9 x 3” • (30) 10 x 3-1/2” • (30) 10 x 4” Cabinet Screws • (25) 10 x 2-1/2” • (30) 10 x 3”

Free Bits (1) Each: T20x1”- 20x2”-T25x1”-T25x2” Free Bits (1) Each: T20x1”- T20x2”-T25x1”-T25x2”#SSAK - Silver Star Stainless Steel Star Drive Wood Screw Assortment Kit Net Wt* 4.5 lbs

#CFAK - Gold Star Cabinet/Finish Star Drive Wood Screw Assortment Kit Net Wt* 4.4 lbs

• (40) 8 x 1-1/4” • (40) 8 x 1-1/2” • (40) 9 x 1-5/8” • (40) 9 x 2” • (40) 9 x 2-1/2”

• (40) 9 x 3” • (40) 10 x 2-1/2” • (40) 10 x 3” • (40) 10 x 3-1/2” • (40) 10 x 4”

Cabinet Screws:• (30) 10x2-1/2” • (25) 10x3” Finish Screws: • (80) 7x1-5/8” • (65) 7x2” (80) 7x2-1/2” • (80) 7x3”

Pocket Screws: • (70) 7x1-1/4” C • (70) 7x1-1/4” F • (60) 7x1-1/2” C • (60) 7x1-1/2” F

Free Bits (1) Each: T20x1”- T20x2”-T25x1”-T25x2” Free Bits (1) Ea.: T10x1”-T10x2”-T20x1”-T20x2”-T25x1”-T25x2”#TFAK – Trim & Finish Bronze Star Drive Wood Screw Assortment Kit Net Wt* 5.4 lbs

#CDAK – #10x2-3/4” C-Deck Composite Star Drive Decking Screw Assortment Kit Net Wt* 6.2 lbs

Finish Screws • (60) 7 x 1-5/8” • (65) 7 x 2” • (80) 7 x 2-1/2” • (80) 7 x 3”

Trim Head • (50) 9 x 1-5/8” • (50) 9 x 2” • (50) 9 x 3” • (50) 9 x 4” • (50) 9 x 5”

• (50) Cedar • (50) Walnut • (50) Desert Bronze • (50) Teak • (50) Vintage Lantern

• (50) White • (50) Gravel Path • (50) Tree House • (50) Fire Pit • (50) Flint

Free Bits (1) Each: T10x1”- T10x2”-T20x1”-T20x2” Free Bits (2) Each: T20x1”- T20x2”#THAK - Trim Head Star Drive Wood Screw Assortment Kit Net Wt* 5 lbs

#CLCK - Bronze Star Exterior Star Drive Construction Lag / Cabinet Screw Assortment Kit Net Wt* 4.1 lbs

Stainless Steel • (50) 9 x 1-5/8” • (50) 9 x 2-1/4” • (50) 9 x 2-1/2” • (50) 9 x 3” • (50) 9 x 4”

Bronze (Exterior) • (50) 9 x 1-5/8” • (50) 9 x 2” • (50) 9 x 2-1/2” • (50) 9 x 3” • (50) 9 x 4”

#1/4”x Lag Screws • (50) 1”, (35) 1-1/2” • (25) 2”• (40) 2-1/2” • (35) 3”

#7x Star Drive Modifi ed Truss Head Screws • (75) 7x1-1/4” • (50) 7x1-5/8” • (45) 7x2” • (40) 7x2-1/2”

Free Bits (2) Each: T20x1”- T20x2” Free Bits (1) Each: : T25x1” - T15x1” - T25x2” - T15x2”

New!New!


13

Bit Holders2PMBH213 C-Ring 2 pc SS Magnetic Bit Holder 2-1/3”

For 1” Bits Only2PMBH6 C-Ring 2 pc SS Magnetic Bit Holder 6”

For 1” Bits OnlySS1PMBH3 C-Ring 1 pc SS Magnetic Bit Holder

For 1” Bits OnlyQR213 Quick Release Magnetic Bit Holder 2-1/3”

QR3 Quick Release Magnetic Bit Holder 3”

SPRMBH SuperMag Magnetic Bit Holder

Star Drive BitsDrive 1” (25) 2” (25) 1” (100) 2” (100) 2-3/4” (10) 3-1/2” (10) 6” (10)

T10

T15

T20 T25 T30

T40

High Quality,Long Lasting Bits!

1” and 2” Bits AvailableIn 100ct Jars!

New Color Coded Bit SetsOur new Bit sets include 10 of the most common Star Drive bits you need to complete most jobs.Our bits are now color coded to help identify the drive size quickly. Our unique carrying case can be clipped onto a belt or tool belt to access the bits you need quickly and easily. These bit sets are the perfect accessory for your home, tool box, workshop or tool belt. They also make wonderful gifts.

Item # Description Net Wt*

10TXBH 10pc 2” Bit Set (includes T10 through T30) .32 lbs10TXBH-12 10pc 1” & 2” Bit Set (includes T10 through T30) .2 lbs

Impact DriverReady!


HOLDSaBITIntroducing the HOLDSaBIT! Simply the easiest and best way to hold multiple insert drill bit driver tips on your cord-less drill or impact. It goes on and off in seconds and holds up to 16 - 1” bit drivers, as well as 1000’s of combinations of bits. The HOLDSaBIT slips on a cordless drill or impact in seconds, providing channels that hold all the tips you need for your projects. Made of a proprietary blend which provides strength & holding power at the same time. UV rated for outdoor use. Fits all full sized cordless drill and drivers.

Item Number DescriptionHAB8 HOLDSaBIT With 8 bitsHAB HOLDSaBIT Only

Here are a few things you can place in your HOLDSaBIT:• Bits - Star, Torx, Square, Phillips, Straight - From 1” to 4”• Hex shank drill bits• Nut drivers• Pencils/Pens• Magnetic tip holders, and many, more tools

Included Bits in HAB8:• (1) 2” T10 • (1) 2” T15• (2) 2” T20 • (2) 2” T25• (1) 2” T30 • (1) 2” T40

14 Screw Products, Inc. • Toll Free (877) 844-8880 • www.screw-products.com*Approximate Weight • 9401 54th Ave NW, Bldg 1B, Gig Harbor, WA 98332 • [email protected] • Jan 2014

CoatingsHere at Screw Products, Inc. we provide the most useful, reliable, and quality fasteners in the world today. For a complete chart of testing data by Trace Laboratories, please call us at 1 (877) 844-8880 today or visit us online.

View our Test Data online at www.screw-products.com/specs.htm

About The Bronze Star SKTIl & E-CoatThe SKTll coating on Screw Products, Inc.’s coated fasteners has been designed to protect against the corro-sive qualities of pressure treated lumber such as ACQ, CCA etc. This is a proprietary coating that has withstood 1200 hours of salt spray testing, thus, we have not encountered any failures to date.

The E-Coating on Screw Products, Inc.’s E-coated fasteners has been designed to protect against the corrosive qualities of pressure treated lumber such as ACQ, CCA etc. This is a proprietary coating that has withstood over 1,000 hours of salt spray testing, thus, we have not encountered any failures to date.

We offer the following guarantee:Screw Products, Inc. will replace any corroded fasteners and provide a fair means of remedy for the re-installation of defective fasten-ers for the life of the project (Original receipt required). This guarantee, however, does not cover the following conditions:

• Improper installation of fastener resulting in the removal of the coating.• Not countersinking the head just below fl ush to eliminate excess wear.• Use of these fasteners with dissimilar metals which may accelerate corrosion (stainless steel/galvanized).• Use of these fasteners within 1 mile of salt water contact or salt air. (Our Stainless Steel is recommended in this case.)

ScrewHolder• Flexible: Bends and conforms to all common shank diameters.• Tapered Interior: Fits wide range of screw head diameters #2-#12.• Reusable: Durable rubber withstands continuous use.• Two Sizes: Small fi ts shanks #0 Large fi ts #1, #2 + metric sizes.• Ribbed Interior: Horizontal ribs keep the screws straight.• Multiple Drivers: Fits Slot, Hex, Torx, Square & Phillips.

Item Number DescriptionSH4PACK 4pc ScrewHolder

15

Pull Out Testing by Material (Thread Depth & LBS)Southern Yellow Pine Douglas Fir Plywood Chip Board Particle Board Redwood

Screw Type LBS Depth LBS Depth LBS Depth LBS Depth LBS Depth LBS DepthSSTH-09300 1110 1-1/2'' 995 1-1/2'' 650 3/4'' 415 1'' 440 3/4'' 292.5 3/4''THBTX-09300 1375 1-1/2'' 1025 1-1/2'' 685 3/4'' 390 1'' 392.5 3/4'' 307.5 3/4''YTX-08212 1135 1-1/2'' 825 1-1/2'' 657 3/4'' 370 1'' 400 3/4'' 312.5 3/4''SSTX-09300 1250 1-1/2'' 767.5 1-1/2'' 512.6 3/4'' 500 1'' 432.5 3/4'' 362.5 3/4''CCTX-516400 1285 1-1/2'' 645 1-1/2'' 670 3/4'' - 1'' - 3/4'' - 3/4''CCTX-516500 2275 1-1/2'' 735 1-1/2'' 590 3/4'' - 1'' - 3/4'' - 3/4''YTX-15100 2000 1-1/2'' 862.5 1-1/2'' 630 3/4'' 630 1'' 445 3/4'' 200 3/4''Screw Pull Through (LBS) Screw Lap Shear (LBS)Screw Type Specifi c Gravities Screw Type SYP

0.42 0.55 YTX-09300 597.557CCTX-14400 1470 1790 THBTX-09212 297.705TH6 1010 1195 HDY104 674.118CCTX-516400 1490 2015 CCTX-516400 1073.292THG5 1360 1615 CCTX-14400 1009.305CCTX-381000 1820 2405 YTX-14600 1053.125Screw Type SYP YTX-15100 1073.163YTX-09300 491.314 TH10 1156.88THBTX-09212 123.455 TH6 1111.39HDY104 575.831 CCTX-38700 1806.854YTX-14600 803.61 CCTX-14600 937.888YTX-15100 774.442 CCTX-516600 1608.757Screw Type COM SSTX-09300 567.547CD234 425 SSTX-10300 651.925SSCD234 376 CCTX-381000 1579.704Screw Pull Out Force (LBS) Screw Type SYP COMScrew Type Specifi c Gravities CD234 529 406

0.42 0.55 SSCD234 488 867CCTX-14400 1562 1700 Screw Shank ShearTH6 1562 1700 Screw Type (LBS)CCTX-516400 1415 1835 TH6 3540.08THG5 1415 1835 CCTX-14600 2858.296CCTX-381000 3393 3952 CCTX-516400 5102.94Screw Type SYP THBTX-09212 2089.511YTX14700 1616 HDY104 2399.063YTX-09300 902.91 YTX-14600 2527.252THBTX-09212 447.73 YTX-151000 3977.239HDY104 1391.11 YTX-08200 2113.753YTX-15100 1079.81 CCTX-38700 5294.677SSTX-09300 622.37 SSTX-09300 1283.681SSTX-10300 781.6 SSTX-10300 1683.175YTX-08200 363.4 YTX-09300 2771.736Screw Type COMCD234 544SSCD234 536

9401 - 54th Ave NW, Bldg 1B, Gig Harbor, WA 98332www.screw-products.com • [email protected]

Toll Free: (877) 844-8880 • FAX: (253) 853-8881

Here at Screw Products, Inc. we provide the most useful, reliable, and quality fasteners in the world today. The charts you see are from 3rd Party Independent ISO Certifi ed Labs For more info on these tests, or a copy of the complete report, please call us Toll Free at (877) 844-8880 today.

Screws that share the same diameter and metal type will have equal values to those tested.

For Example: SSTX-09212 (9x2-1/2”) will share the same values as our SSTX-09300 (9x3”)

Wood Key:SYP Southern Yellow PineCOM CompositeWRC Western Red Cedar

TH Timber HexHDY Heavy Duty Gold StarSSTH Silver Star 305 Stainless Trim Head

Product Code Key:THBTX Bronze Star Trim HeadYTX Gold Star Standard (Same values for BTX) SSTX Silver Star 305 Stainless Standard

CCTX Bronze Star Construction Lag Screws CD Composite Deck CoatedSSCD Composite Deck 305 Stainless Steel


16

What’s New At Screw Products, Inc.?

Phillips Bugle Head Drywall Screws 1-1/8” to 3” LengthsOur drywall screws have a bugle head to prevent tearing, a phosphate coating to help resist corrosion, and a phillips drive recess. They are excellent for wall board, drywall, plaster board, sheet rock, gypsum board, and other materials. See Page 11

New Color Coded Bit SetsOur new Bit sets include 10 of the most common Star Drive bits you need to complete most jobs. Our bits are now color coded to help identify the drive size quickly. Our unique carrying case can be clipped onto a belt or tool belt to access the bits you need quickly and easily. These bit sets are the perfect accessory for your home, tool box, workshop or tool belt. They also make wonderful gifts. See Page 13

Gray Timber Hex Log & Lumber Screws #17 x 4” to 11” LengthsSuperior Alternative to Spikes - Timber Hex Timber and Landscape Hex Drive Screws are a 5/16” head & are reusable! They’ll install faster and have much greater holding power over traditional timber and landscaping spikes. Great for landscaping timbers connections, log homes, and other exterior applications. See Page 10

White Head Bronze Star Trim Head Screws 1-5/8” to 3” LengthsOur new Painted White Head Bronze Star Trim Head Screws are available, in Bulk pails, 1lb Jars and 5lb Jars. Great for interior and exterior cabinetry and trim work. See Page 2


9401 54th Ave NW, Bldg 1BGig Harbor, WA 98332

Call ForFree Samples!

Head Screw Description Sizes Page - Star Drive Wood · PDF file3 Gold Star Multi Purpose Star Drive Wood Screws The Ultimate Multi Purpose Screw Gold Star yellow zinc coated screws

Documents