Hydraulic Torque Wrenches For further information or for price and availability enquiries please contact your nearest office: Global service Norbar is the only torque equipment manufacturer to be able to offer tool and instrument recalibration services to the original factory standard on four continents. The accredited laboratories in Australia, USA and Singapore use the same equipment and procedures as the factory’s UKAS accredited laboratory in the UK. Western Australia Unit 3/95 Bannister Road Canning Vale WA 6155 Tel: +61 (0)8 9455 7717 Fax: +61 (0)8 9455 7979 Email: [email protected]Head Office - South Australia 45 - 47 Raglan Avenue Edwardstown SA 5039 Tel: +61 (0)8 8292 9777 Fax: +61 (0)8 8292 9799 Email: [email protected]New Zealand 65a O’Rorke Road Penrose Auckland NZ Tel: +64 (0)9 579 8653 Fax: +64 (0)9 579 8654 Email: [email protected]Queensland Unit 5/55 Donaldson Road Rocklea QLD 4106 Tel: +61 (0)7 3216 7600 Fax: +61 (0)7 3216 6392 Email: [email protected]Victoria Unit 6/810 Princes Highway Springvale VIC 3171 Tel: +61 (0)3 9562 3382 Fax: +61 (0)3 9562 3072 Email: [email protected]South East Asia - Singapore 60 Kaki Bukit Place #09-16 Eunos Tech-Pack Singapore 415979 Tel: +65 6841 1371 Fax: +65 6841 1372 Email: [email protected]New South Wales Unit 33/72 - 80 Percival Road Smithfield NSW 2164 Tel: +61 (0)2 9725 2831 Fax: +61 (0)2 9604 0951 Email: [email protected]Specifically designed for extremely low height access applications, our Hydraulic Torque Wrenches offer a cost efficient option to handle a wide range of bolt tightening and break-out needs. Our standard Square Drive Series features eight different tools with capacities ranging from 194 to 81,360 N.m of torque using a 10,000 p.s.i hydraulic pump. Our standard Hydraulic Cylinder/Link Series features seven different wrenches with capacities ranging from 159 to 67,800 N.m of torque using a 10,000 p.s.i. hydraulic pump. With our range of power consoles and accessories, Norbar can tailor a solution to your specific bolt tensioning application, no matter how unique! Norbar Hydraulic Torque Tools
2
Embed
Head Office - South Australia Hydraulic Torque Wrenches Tools A4.pdf · Hydraulic Torque Wrenches For further information or for price and availability enquiries please contact your
This document is posted to help you gain knowledge. Please leave a comment to let me know what you think about it! Share it to your friends and learn new things together.
Transcript
Hydraulic Torque Wrenches
For further information or for price and availability enquiries please contact your nearest office:
Global service
Norbar is the only torque equipment manufacturer to be able to offer tool and instrument recalibration services to the original factory standard on four continents. The accredited laboratories in Australia, USA and Singapore use the same equipment and procedures as the factory’s UKAS accredited laboratory in the UK.
Western AustraliaUnit 3/95 Bannister RoadCanning Vale WA 6155Tel: +61 (0)8 9455 7717Fax: +61 (0)8 9455 7979Email: [email protected]
Head Office - South Australia45 - 47 Raglan AvenueEdwardstown SA 5039Tel: +61 (0)8 8292 9777Fax: +61 (0)8 8292 9799Email: [email protected]
South East Asia - Singapore60 Kaki Bukit Place#09-16 Eunos Tech-PackSingapore 415979Tel: +65 6841 1371Fax: +65 6841 1372Email: [email protected]
New South WalesUnit 33/72 - 80 Percival RoadSmithfield NSW 2164Tel: +61 (0)2 9725 2831Fax: +61 (0)2 9604 0951Email: [email protected]
Specifically designed for extremely low height access applications, our Hydraulic Torque Wrenches offer a cost efficient option to handle a wide range of bolt tightening and break-out needs.
Our standard Square Drive Series features eight different tools with capacities ranging from 194 to 81,360 N.m of torque using a 10,000 p.s.i hydraulic pump.
Our standard Hydraulic Cylinder/Link Series features seven different wrenches with capacities ranging from 159 to 67,800 N.m of torque using a 10,000 p.s.i. hydraulic pump.
With our range of power consoles and accessories, Norbar can tailor a solution to your specific bolt tensioning application, no matter how unique!
Norbar Hydraulic Torque Tools
AIR POWERED CONSOLES
Air Powered Console Model Number
Oil Delivery per Minute
Oil Reservoir (Litre)
Usable Oil (inches3)
Overall Width (cm)
Overall Length (cm)
Overall Height (cm)
Pump Weight w/ Oil (kg)
RWP55465 in³ @100psi
9.46 590 42 24.1 50.3 29.555 in³ @ 10,000psi
• Use where air is the preferred source of power • Powerful 3hp motor starts under load • External adjustable pressure regulator • Retract side internal relief valve protects tool • Use for double or single acting tools
Air Motor, Air Control
• 3hp, 50 cfm @ 80 psi • Pneumatic remote control with 30-foot
cord
ELECTRIC POWERED CONSOLES
Air Powered Console Model Number
Oil Delivery per Minute
Oil Reservoir (Litre)
Usable Oil (inches3)
Overall Width (cm)
Overall Length (cm)
Overall Height (cm)
Pump Weight w/ Oil (kg)
TWP55-50-220704 in³ @100psi
9.46 525 43.5 24.1 46 34.156 in³ @ 10,000psi
These pumps have been continually upgraded over the last 40 years and some of the originals are still in service! Equipped with a 1-1/8 horse power, single phase, universal motor; they have a noise level of 90-95 dBA. These power consoles offer the best weight to performance ratio of any of our electric/hydraulic pumps. CSA rated for intermittent duty.
• Two-speed high performance pump • External adjustable pressure regulator • Retract side internal relief valve protects tool • Hand remote • Use for double or single acting tools • Remote control with 30-foot cord
Electric Motor
• 1-1/8 hp, 12000 rpm Remote control with 30-foot cord
• 115V, 25 amps • 110V/50Hz, 25 amps
Electric Control
• 220V/50Hz, 13 amps
ELECTRIC POWERED CONSOLE (TL-TP230)
Model Number Motor Voltage Electricity PowerMaximum Nameplate
Current
Maximum Advance Pressure
Pressure @15 Amp Motor Current (with 80° F - 100° F Oil Temp)
Retract Pressure
TLTP (230) 230 V50 Hz 1.5 KW
10.5 A700 bar n/a 120 bar
1 Phase 2Hp 10,150 psi n/a 1.740 psi
Hydraulic power unit engineered to continuously and reliably operate a variety of hydraulically powered torque wrenches operating up to 700 bar / 10,150 psi.
Thiscompactdesignutilisesafinnedhousingwithintegralfanthateliminates the need for an external cooler. Directly mounted pressure
and directional control valves eliminate additional plumbing and potential leak points while keeping the unit compact.
This unit includes pendant control for manual advance and automatic retract operation.
Model Number "Advance Flow Rate (0-100 bar / 0-1500 psi )"
"Advance Flow Rate (100-700 bar /1,500-10,1500 psi )"
Reservoir Capacity Usable Oil Noise Level
@ 300 bar Unit Weight w/Oil Control Pendant Length
TLTP (230) 340 in3/min 67 in3/min 3.7 liter 1.7 liter 68–70 dB 34 kg 6 meter
*Weight includes tool, reaction member and square drive. †Steel Casting **Please inquire for additional information.
Norbarsquaredrivehydraulicratchetwrenchesofferacostefficientoption to handle a wide range of bolt tightening and break-out needs. The NSD Series ratchet wrench employs a “patented design” which increases accuracy and reduces the number of moving parts. Our robust and lightweight aluminum body completely encloses the drive train assembly keeping the crucial lubricant inside the tool whilesignificantlyreducingtheopportunityforoutsideelementstocontaminate the inside of the tool.
*32 to 51 Heads †56 to 75 Heads §Steel Cylinders Only **Please inquire for additional information.
Norbar Inline hydraulic ratchet wrenches require minimum clearance while applying torque on the same plane as the nut, providing a marked improvement over square drive socket wrenches. Our patented design breakthrough reduces the overall dimensionsoftheinlineratchetingheadallowingittofitalmostevery application.