Head Office and Manufacturing Plant and Sales department: PetrolValves srl. Viale G. Borri, 42 21053 Castellanza (VA) - Italy Tel.: +39-0331.334.111 Fax.: +39-0331.675.830 E-Mail: [email protected]PetrolValves (G.B.) Ltd 18-22 Church Street - Hampton Middlesex TW12 2EG Tel.: +44-20-8783.2350 Fax: +44-20-8783.2355 E-Mail: [email protected]PetrolValves Scotland Unit E28, - Wellheads Industrial Estate, Wellheads Crescent, Aberdeen, AB21 7GA, - Scotland Tel.: +44-1224-77.39.99 Fax: +44-1224-77.39.97 E-Mail: [email protected]PetrolValves A/S Norway Luramyrveien, 57 N- 4313 Sandnes - Norway Post Box 1153 - 4391 Sandnes (Norway) Tel.: +47-51-96.22.00 Fax: +47-51-96.22.01 E-Mail: [email protected]PetrolValves LLC (USA) Fairbanks Center 4300 Windfern Suite #300 Houston, Texas 77041-8916 Tel.: +1-713-462.8400 Fax: +1-713-462.8416 E-Mail: [email protected]PetrolValves Saudi Arabia Dammam Second Industrial City P.O. Box 1280, Al-Khobar 31952 Kingdom of Saudi Arabia Tel.: +966-3-812.1299 Fax: +966-3-812.1099 E-Mail: [email protected]PetrolValves Algerie Bureau D’alger - Lotissement El Feth, 49 El Biar - Alger - Algerie Tel.: +213-2-92 41 60 Fax: +213-2-92 41 52 E-Mail: [email protected]PetrolValves Singapore 1 Marine Parade Central #08-08 Parkway Builder’s Centre Singapore 449 408 Tel.: +65-345 2405 - Fax: +65-345 2136 E-Mail: [email protected]BALL VALVES Sesto S.G. - (MI) Foto LOMAZZI Busto A.(VA) BALL VALVES BALL VALVES TOP ENTRY & SPLIT BODY TOP ENTRY & SPLIT BODY TOP ENTRY & SPLIT BODY Edition 01-03
43
Embed
Head Office and Sales department: VALVES - Zftppvusa.zftp.com/petrolvalves-ball-valve-brochure-2009.pdf · Manufacturing Plant and Sales department: PetrolValves srl. ... valves for
This document is posted to help you gain knowledge. Please leave a comment to let me know what you think about it! Share it to your friends and learn new things together.
Transcript
Head Office andManufacturing Plant andSales department:PetrolValves srl.Viale G. Borri, 4221053 Castellanza (VA) - ItalyTel.: +39-0331.334.111Fax.: +39-0331.675.830E-Mail: [email protected]
PetrolValves (G.B.) Ltd18-22 Church Street - HamptonMiddlesex TW12 2EG Tel.: +44-20-8783.2350 Fax: +44-20-8783.2355E-Mail: [email protected]
PetrolValves Saudi ArabiaDammam Second Industrial CityP.O. Box 1280, Al-Khobar 31952Kingdom of Saudi ArabiaTel.: +966-3-812.1299 Fax: +966-3-812.1099E-Mail: [email protected]
TOP ENTRY SPLIT BODY TOP ENTRY SPLIT BODY FLOATING TRUNNION FLOATING TRUNNION
PETROLVALVES - USATEXASSales department,and with the support of a highly professional com-mercial team can offer direct assistance to customers on site.
PETROLVALVES - GBLONDON
Sales department,under the supervision and the total responsibility and guarantee of PetrolValves.
CASTELLANZA - ITALY Main WorksOne of the biggestEuropean ValveWorkshops withan area of 80.000square meters.PetrolValves Head Offices and Manufacturing Plant and Sales department, are located North-West of Milan, near to the main Italian communica-tion infrastructures.
PETROLVALVES A/S - NORWAY PetrolValves Subsidiary PlantOne of the first Norwegian valve manufacturers capable of supplying and maintaining all valves within PetrolValves range of production.PV A/S Factory in Stavanger has a complete Machining and Testing department and with the sup-port of a highly professional technical commercial team can offer direct assistance to customers on site.A comprehensive stock of small and medium sizevalves is kept in stock in their large premises to further support the Norwegian Oil and Gas Industry.
PETROLVALVES - POVAL (EX PMH) - ALGERIEProduction, maintenance and commercialization of valves for hydrocarbon service in Algerie under the supervision and the total responsibility and guarantee of PetrolValves.
PETROLVALVES - SAUDI ARABIA Production, commercialization and maintenance of valves
for hydrocarbon service in Saudi Arabia under the supervision and the total responsibility
and guarantee of PetrolValves.
BALLVALVES BALLVALVES
TOP ENTRY &SPLIT BODY TOP ENTRY &SPLIT BODY FLOATING &TRUNNION FLOATING &TRUNNION
With a covered area of 80.000 m2 PetrolValves’ factory has the capacity of manufacturing both standard and special Ball Valves. Due to the high quality product and the proven long term reliability PetrolValves range of Ball Valves in known throughout the world as “high reliability valves”. PetrolValves’ current range of Ball Valves have been developed through a combination of practical research, design improve-ment and up to date material and production technology. Computer finite element systems optimise the design and provide maxi-mum strength with mini-mum weight for installa-tion, shipping and han-dling costs. PetrolValves complies the strict requirements of its internal Quality Assurance and Quality Control system. PetrolValves is able to satisfy even the most seve-re Customer requests and specifications.
BALL VALVES
INDEX
4
5 INTRODUCTION 7 ENGINEERING 8 TECHNOLOGICAL RESEARCH AND INNOVATION 9 PRODUCT ORIENTATION
11 QUALITY
13 BALL VALVE ACCESSORIES
14 BALL VALVE OPERATORS
17 STANDARD BALL VALVES 19 ANSI TOP ENTRY CLASS 150 up to 2500
33 ANSI SPLIT BODY CLASS 150 up to 2500
47 API 6A TOP ENTRY 2.000 psi up to 20000 psi
61 API 6A SPLIT BODY 2.000 psi up to 20000 psi 75 SPECIAL SERVICE PRODUCTS
77 RANGE OF PRODUCTION
82 MANUFACTURING PLANTS
150
300
5000
1000
06A
2000
3000
6A6A
1500
020
000
5000
1000
06A
6A20
0030
0015
000
2000
0TO
P EN
TRY
TOP
ENTR
YTO
P EN
TRY
TOP
ENTR
Y6A
TOP
ENTR
YANSI
TOP
ENTR
YTO
P EN
TRY
600
900
TOP
ENTR
Y
1500
2500
150
300
600
900
1500
2500
ANSI
API
API
SPLIT
BODY
SPLIT
BODY
SPLIT
BODY
SPLIT
BODY
SPLIT
BODY
SPLIT
BODY
SPLIT
BODY
SPLIT
BODY
INTRODUCTIONFor any application PetrolValves is able to offer the best solution, with safety and reliability
Milestones of PetrolValves Ball Valves Supplies
- PetrolValves starts production of ANSI Ball Valves
- PetrolValves starts production of Api 6A/6D Ball Valves
- PetrolValves starts production of Ball Valves for Geothermal Service
- Largest Ball Valves ever built up to the mid seventies (NS 38”, 30” and 24” Class 900) supplied to Shell - St. Fergus Gas Plant. Valves are employed either for Emergency Shut Down or Pig Trap service; all valves are still operating satisfactorily.
- Performance and reliability of valves is enhanced with the implementation of Flexible Seat Design (PetrolValves patent).
- PetrolValves supplies API 6A - High pressure and Large Size (up to 135/8 “ API 5.000 psi) - Ball Valves for Geothermal Well Heads.
- PetrolValves supplies NS 40” Class 900 Ball Valves for Zeepipe gas terminal.
- PetrolValves supplies all Ball Valves for Troll Gas Plant (NS 40”, 36”, 30” Class 900 - NS 20” and 24“ Class 1500)
- PetrolValves supplies NS 42” Class 900 Ball Valves for Norfra Gas Plant.
- PetrolValves supplies NS 40” Class 1500 ‘cartridge type’ Ball Valves suitable for subsea operation to be installed on Asgard gas transportation line.
- PetrolValves successfully concludes the design activity of NS 42” Class 1500 Ball Valves for Europipe ll/Asgard projects.
5 6
BALL VALVES THREE PIECES SPLIT BODY ANSI - CLASS: 150 up to 2500
API - 2000 up to 20000 psi. End: RF - RTJ - BW - HUB
BALL VALVES TRUNNION TOP ENTRY ANSI - CLASS: 150 up to 2500
API -2000 up to 20000 psi.
End: RF - RTJ - BW - HUB
BALL VALVES TWO PIECES SPLIT BODYANSI - CLASS: 150 up to 2500
API - 2000 up to 20000 psi.
End: RF - RTJ - BW - HUB
BALL VALVES CAST STEEL TOP-ENTRY ANSI - CLASS: 150 up to 2500API - 2000 up to 20000 psi.
End: RF - RTJ - BW - HUB
FLGD
BW
Tightseals
ENGINEERING
PetrolValves engineering staff is expert in the most sophisticated design tools. The programs include non-linear analysis of large valve bodies, with the simulation of the performance of all seals in all operating conditions (i.e. pressure,temperature, external loads).
Periodical indoctrination sessions keep the designers up to date with the results achieved by prototype tests and with the field experience of valves.
Our technical data base system collects all results and know-how, establishing a base for future developments with regard to new products, and allowing the innovative solutions that PetrolValves always pursues.
7
CALCULATION MODELS ARE VERIFIED AND ADJUSTED THROUGHSTRAIN GAUGEMEASUREMENTS
TECHNOLOGICAL RESEARCH AND INNOVATION
DETAIL OF MESH WITHLOADS
8
STRESS INTENSITYDISTRIBUTION
TOP ENTRY BALL VALVE 42” - CLASS 1500 - BW
GAS TEST WITH BENDING MOMENT
PRODUCT ORIENTATION
PetrolValves manufacturing department is equipped with a larger range of machines, constantly kept up to date with all the latest technical innovations. All operations are supervised by a highly specialized team.
PetrolValves production includes the largest ball valves ever built in the world.
9 10
QUALITY Before being placed in production cycle, all materials are identified and verified according to high quality standards. Therefore, we are equipped with the most modern instruments able to verify chemical properties of any component.
1211
STEM SEALS Stem seals consist of O-Ringslocated in the stem bushing. Regardless of size or pressurerating the stem seals can be replaced with the valve installed in pressurized lines.
DRAIN AND VENT Unless otherwise specified in purchase order PetrolValves Ball Valves are supplied with NPT plug at vent and drain locations. On request, valves can be equipped with integral bleeder for vent and drain purposes, or with automatic relief valve at vent point only.
BALL VALVE ACCESSORIES
BALL VALVE ACCESSORIES AND OPERATORS
Stem emergency sealant injection for Three Pieces BALL VALVES
NPT plug
Integral bleeder
Automatic integral relief valve
1413
FOR UNDERGROUND SERVICE PetrolValves Ball Valves, require no maintenance for continuous safety and reliabili-ty, and are fully suitable for underground installation in remote or inaccessible piping.Stem extensions, supplied“water-tight” for buried service, are available whether equipped with lever, worm gear or power actuators.
Valve body cavity vent and drain connections and also injection points are all fitted by means of pipes at the actuator flange level for an easy operation in case of need.These pipes terminate withproper fittings fixed on the extension, below the upper support flange.All extension dimensions mustbe given, by customer, with reference from valve centerline axis to manoeuvre axis.
15 16
BALL VALVE OPERATORS
PetrolValves Ball Valves are available with a complete selection of manual operators. Levers or worm gears are normally supplied as manual operators.
Actuator types include pneumatic or hydraulic cylin-ders, either double acting or spring return, and elec-tric motors, according to the technical requirements.
All actuators can be sized for maximum valve rating conditions; however it is generally more economical to size the actuator for the specific service condition.
PetrolValves engineering department is available to assist the Client for any special application.
FLOATING AND TRUNNION BALL VALVES
17 18
PRESSURE CLASSES:- ANSI 150 to 4500- API 2000 psi to 20000 psi
METAL to METAL
HARDFACINGS: - Stellite- Chromium or - Tungsten carbides- Colmonoy
STANDARDBALL VALVES
PetrolValves Ball Valves can be supplied in various trims to meet the requirements of many types of service conditions.
Valves with one welding-end and one flanged-end are covered in this table.Dimension for these valves may be determined by adding half the length of the welding-ends
valve to one half the length of the flanged-ends valve of the same pressure rating.
21 22
FULL BORE
ANSICLASS 150 150
TOP
ENTR
Y
SIZE END to END GEAR OPERATED LEVER OPERATED INCHES RF RTJ BW F C EE ØDD H L 21/2 x 2 330 333 330 170 65 - - 125 500 3 x 2 356 359 356 170 65 - - 125 500 4 x 3 432 435 432 220 110 230 300 210 700 6 x 4 559 562 559 260 130 280 300 290 700 8 x 6 660 663 660 325 240 320 400 - - 10 x 6 787 790 787 325 240 320 400 - - 12 x 8 838 841 838 415 300 345 400 - - 14 x 10 889 892 838 545 300 435 400 - - 16 x 12 991 994 991 590 350 510 500 - - 18 x 14 1092 1095 1092 655 345 540 500 - - 20 x 16 1194 1200 1194 705 400 585 700 - - 24 x 20 1397 1407 1397 915 495 685 700 - - 26 x 20 1448 1461 1448 915 495 685 700 - - 28 x 24 1549 1562 1549 1080 590 850 500 - - 30 x 24 1651 1664 1651 1080 590 850 500 - - 32 x 26 1778 1794 1778 1160 590 840 600 - - 34 x 28 1930 1946 1930 1220 590 905 600 - - 36 x 30 2083 2099 2083 1345 715 975 600 - - 40 x 36 2337 * 2337 1460 810 1065 600 - - 42 x 36 2438 * 3438 1460 810 1065 600 - - 46 x 40 2438 * 2438 1645 875 1170 600 - - 48 x 42 2450 * 2450 1730 910 1245 600 - - 56 x 48 2904 * 2904 2005 990 1390 600 - - 60 x 56 3048 * 3048 2380 1140 1590 800 - -
* Dimensions available upon request. Dimensions in mm.. * Dimensions available upon request. Dimensions in mm..
Valves with one welding-end and one flanged-end are covered in this table.Dimension for these valves may be determined by adding half the length of the welding-ends valve to one half the length of the flanged-ends valve of the same pressure rating.
* Dimensions available upon request. Dimensions in mm.. * Dimensions available upon request. Dimensions in mm..
Valves with one welding-end and one flanged-end are covered in this table.Dimension for these valves may be determined by adding half the length of the welding-ends
valve to one half the length of the flanged-ends valve of the same pressure rating.
* Dimensions available upon request. Dimensions in mm..
* Dimensions available upon request. Dimensions in mm..
SIZE END to END GEAR OPERATED LEVER OPERATED INCHES RF RTJ BW F C EE ØDD H L 21/2 x 2 419 422 419 200 90 215 300 220 500 3 x 2 381 384 381 200 90 208 300 220 500 4 x 3 457 460 457 220 110 245 300 255 700 6 x 4 610 613 610 260 135 305 400 310 1000 8 x 6 737 740 660 380 280 360 400 - - 10 x 6 838 841 838 380 280 360 400 - - 12 x 8 965 968 965 465 335 505 700 - - 14 x10 1029 1038 1029 560 345 570 700 - - 16 x12 1130 1140 1130 660 380 620 600 - - 18 x 14 1219 1232 1219 730 420 610 600 - - 20 x16 1321 1334 1321 810 440 650 600 - - 24 x 20 1549 1568 1549 1030 535 860 600 - - 26 x 20 1651 1673 1651 1030 535 850 600 - - 28 x 24 1778 1800 1778 1170 625 955 800 - - 30 x 24 1880 1902 1880 1170 625 955 800 - - 32 x 26 2162 2184 2162 1255 680 1025 800 - - 34 x 28 2235 2263 2159 1340 715 1095 800 - - 36 x 30 2286 2315 2286 1435 750 1160 800 - - 40 x 36 2540 * 2540 1750 850 1320 800 - - 42 x 36 2667 * 2667 1750 850 1320 800 - - 46 x 40 * * * 2185 1000 1580 1000 - - 48 x 42 * * * 2460 1085 1735 1000 - -
Valves with one welding-end and one flanged-end are covered in this table.Dimension for these valves may be determined by adding half the length of the welding-ends valve to one half the length of the flanged-ends valve of the same pressure rating.
* Dimensions available upon request. Dimensions in mm.. * Dimensions available upon request. Dimensions in mm..
SIZE END to END GEAR OPERATED LEVER OPERATED INCHES RF RTJ BW F C EE ØDD H L 21/2 x 2 419 422 419 195 90 215 300 220 500 3 x 2 470 473 470 195 90 215 300 220 500 4 x 3 546 549 546 240 120 290 400 295 700 6 x 4 705 711 705 330 215 410 400 - - 8 x 6 822 842 822 400 270 470 700 - - 10 x 6 991 1000 991 400 320 470 700 - - 12 x 8 1130 1146 1130 495 370 530 700 - - 14 x10 1257 1276 1257 590 425 575 600 - - 16 x12 1384 1406 1384 730 430 645 600 - - 18 x 14 1537 1559 1537 810 510 665 600 - - 20 x16 1664 1686 1664 885 545 745 600 - - 24 x 20 1943 1972 1943 1090 635 990 800 - - 26 x 20 1981 2010 1981 1090 635 990 800 - - 28 x 24 2032 2061 2032 1340 660 1125 800 - - 30 x 24 2540 2562 2540 1340 780 1125 800 - - 32 x 26 2415 2444 2415 1520 820 1200 800 - - 34 x 28 2743 2755 2743 1805 870 1315 800 - - 36 x 30 2743 2755 2743 1660 910 1385 800 - -
Valves with one welding-end and one flanged-end are covered in this table.Dimension for these valves may be determined by adding half the length of the welding-ends
valve to one half the length of the flanged-ends valve of the same pressure rating.
* Dimensions available upon request. Dimensions in mm.. * Dimensions available upon request. Dimensions in mm..
FULL BORE
31 32
Valves with one welding-end and one flanged-end are covered in this table.Dimension for these valves may be determined by adding half the length of the welding-ends valve to one half the length of the flanged-ends valve of the same pressure rating.
In many applications, the operation of valves requires the use of manual, electric, pneumatic, or hydraulic actuators.PetrolValves will supply any typeof particular service conditions.
72
1
3
2CLASS150 up to
2500 METAL to METAL
HARDFACINGS: Stellite Chromium or Tungsten carbides Colmonoy
Valves with one welding-end and one flanged-end are covered in this table.Dimension for these valves may be determined by adding half the length of the welding-ends
valve to one half the length of the flanged-ends valve of the same pressure rating.
* Dimensions available upon request. Dimensions in mm..
* Dimensions available upon request. Dimensions in mm..
SIZE END to END GEAR OPERATED LEVER OPERATED INCHES RF RTJ BW F (C▲) C1 EE ØDD H L 21/2 x 2 241 257 241 155 95▲ - - 160 450 3 x 2 283 299 283 155 95▲ - - 160 450 4 x 3 305 321 305 210 120▲ - - 185 450 6 x 4 403 419 457 240 135▲ 225 300 255 700 8 x 6 502 518 521 345 250 305 400 - - 10 x 6 568 584 559 345 250 305 400 - - 12 x 8 648 664 635 425 280 340 400 - - 14 x 10 762 778 762 505 345 405 500 - - 16 x 12 888 854 838 580 385 455 700 - - 18 x 14 914 930 914 625 410 480 700 - - 20 x 16 991 1010 991 710 455 595 500 - - 24 x 20 1143 1165 1143 895 545 625 600 - - 26 x 20 1245 1270 1245 895 545 600 600 - - 28 x 24 1346 1372 1346 1020 600 695 600 - - 30 x 24 1397 1423 1397 1020 600 695 600 - - 32 x 26 1524 1552 1524 1080 640 740 600 - - 34 x 28 1626 1654 1626 1220 710 840 600 - - 36 x 30 1727 1756 1727 1270 750 870 600 - - 40 x 36 1930 * 1930 1550 875 1055 600 - - 42 x 36 2032 * 2032 1550 875 1055 600 - - 46 x 40 2337 * 2337 1720 980 1160 600 - - 48 x 42 2388 * 2388 1785 1030 1235 800 - - 56 x 48 2642 * 2642 2005 1155 1340 800 - - 60 x 56 2946 * 2946 2345 1325 1515 800 - -
Valves with one welding-end and one flanged-end are covered in this table.Dimension for these valves may be determined by adding half the length of the welding-ends valve to one half the length of the flanged-ends valve of the same pressure rating.
* Dimensions available upon request. Dimensions in mm.. * Dimensions available upon request. Dimensions in mm..
SIZE END to END GEAR OPERATED LEVER OPERATED INCHES RF RTJ BW F (C▲) C1 EE ØDD H L 21/2 x 2 330 333 330 185 110▲ 175 300 170 500 3 x 2 365 359 356 185 110▲ 175 300 170 500 4 x 3 432 435 432 230 185 250 300 215 700 6 x 4 559 562 559 255 195 235 300 - - 8 x 6 660 663 660 355 250 310 400 - - 10 x 6 787 790 787 355 270 310 400 - - 12 x 8 838 841 838 430 290 420 500 - - 14 x 10 889 892 889 525 355 445 700 - - 16 x 12 991 994 991 615 400 555 500 - - 18 x 14 1092 1095 1092 675 430 600 500 - - 20 x 16 1194 1200 1194 785 485 595 600 - - 24 x 20 1397 1407 1397 940 585 690 600 - - 26 x 20 1448 1461 1448 940 585 690 600 - - 28 x 24 1549 1562 1549 1110 650 765 600 - - 30 x 24 1651 1664 1651 1110 650 765 600 - - 32 x 26 1778 1794 1778 1165 730 865 600 - - 34 x 28 1930 1946 1930 1225 750 900 600 - - 36 x 30 2083 2099 2083 1330 800 970 800 - - 40 x 36 2337 * 2337 1580 935 1095 800 - - 42 x 36 2438 * 2438 1580 935 1095 800 - - 46 x 40 2438 * 2438 1720 1010 1195 800 - - 48 x 42 2540 * 2540 1785 1045 1200 800 - - 56 x 48 2904 * 2904 2045 1175 1350 1000 - - 60 x 56 3048 * 3048 2550 1450 1555 1000 - -
Valves with one welding-end and one flanged-end are covered in this table.Dimension for these valves may be determined by adding half the length of the welding-ends
valve to one half the length of the flanged-ends valve of the same pressure rating.
* Dimensions available upon request. Dimensions in mm.. * Dimensions available upon request. Dimensions in mm..
42
ANSICLASS 900
900
SPLIT
BODY
SPLIT BODY
41
REDUCED BORE SIZE END to END GEAR OPERATED LEVER OPERATED INCHES RF RTJ BW F (C▲) C1 EE ØDD H L 21/2 x 2 419 422 419 210 120▲ 215 300 195 500 3 x 2 381 384 381 210 120▲ 215 300 215 700 4 x 3 457 460 457 240 155 255 300 - - 6 x 4 610 613 610 270 200 265 400 - - 8 x 6 737 740 737 375 270 330 400 - - 10 x 6 838 841 838 375 295 330 400 - - 12 x 8 965 968 965 465 315 395 700 - - 14 x 10 1029 1038 1029 550 350 515 500 - - 16 x 12 1130 1140 1130 660 410 525 700 - - 18 x 14 1219 1232 1219 705 430 550 600 - - 20 x 16 1321 1334 1321 840 275 630 600 - - 24 x 20 1549 1568 1549 1035 620 795 600 - - 26 x 20 1219 1232 1219 705 430 550 600 - - 28 x 24 1778 1800 1778 1190 700 910 800 - - 30 x 24 1880 1842 1880 1190 700 910 800 - - 32 x 26 2032 * 2032 1240 720 920 600 - - 34 x 28 2159 * 2159 1260 750 930 800 - - 36 x 30 2286 2315 2286 1260 750 940 800 - - 40 x 36 2540 * 2540 1540 905 1110 800 - - 42 x 36 2667 2696 2667 1540 905 1110 800 - - 46 x 40 * * * * * * * - - 48 x 42 * * * * * * * - -
Valves with one welding-end and one flanged-end are covered in this table.Dimension for these valves may be determined by adding half the length of the welding-ends valve to one half the length of the flanged-ends valve of the same pressure rating.
* Dimensions available upon request. Dimensions in mm..* Dimensions available upon request. Dimensions in mm..
43 44
ANSICLASS 1500
1500
SPLIT
BODY
SPLIT BODY REDUCED BORE
SIZE END to END GEAR OPERATED LEVER OPERATED INCHES RF RTJ BW F (C▲) C1 EE ØDD H L 21/2 x 2 419 422 419 210 120▲ 215 300 195 500 3 x 2 470 473 470 210 120▲ 215 300 190 500 4 x 3 546 549 546 260 175 275 400 - - 6 x 4 705 711 705 340 220 325 400 - - 8 x 6 832 842 832 435 330 400 700 - - 10 x 6 991 1000 991 435 330 400 700 - - 12 x 8 1130 1146 1130 540 335 545 500 - - 14 x 10 1257 1276 1257 670 415 555 600 - - 16 x 12 1384 1406 1384 735 450 590 600 - - 18 x 14 1537 1559 1537 755 460 630 600 - - 20 x 16 1664 1686 1664 910 545 730 600 - - 24 x 20 1943 1972 1943 1060 635 820 800 - - 26 x 20 1981 2010 1981 1060 635 820 800 - - 28 x 24 2032 2061 2032 1295 765 965 800 - - 30 x 24 2286 2315 2286 1295 765 965 800 - - 32 x 26 2415 2444 2415 1385 815 1050 800 - - 34 x 28 2743 * 2743 1465 870 1090 800 - - 36 x 30 2743 * 2743 1555 790 1135 800 - -
Valves with one welding-end and one flanged-end are covered in this table.Dimension for these valves may be determined by adding half the length of the welding-ends
valve to one half the length of the flanged-ends valve of the same pressure rating.
* Dimensions available upon request. Dimensions in mm.. * Dimensions available upon request. Dimensions in mm..
45 46
Valves with one welding-end and one flanged-end are covered in this table.Dimension for these valves may be determined by adding half the length of
the welding-ends valve to one half the length of the flanged-ends valve of the same pressure rating.
Valves with one welding-end and one flanged-end are covered in this table.Dimension for these valves may be determined by adding half the length of the welding-ends
valve to one half the length of the flanged-ends valve of the same pressure rating.
* Dimensions available upon request. Dimensions in mm.* Dimensions available upon request. Dimensions in mm.
51 52
3000
6A TOP E
NTRY
API 6ATOP ENTRY 3000 psi SIZE END to END GEAR OPERATED LEVER OPERATED
INCHES HUB RTJ BW F C EE ØDD H L 21/16 324 371 324 200 130 215 400 220 500
29/16 372 422 372 215 145 225 400 195 700
31/8 337 384 337 220 150 245 400 255 700
41/16 407 460 407 260 170 290 400 310 1000
51/8 503 562 503 310 195 335 500 - -
71/16 549 613 549 380 210 360 500 - -
9 668 740 668 465 260 580 500 - -
11 762 841 762 560 315 645 500 - -
135/8 880 968 880 660 355 620 600 - -
163/4 1040 1140 1040 810 390 650 600 - -
203/4 1213 1334 1213 1030 535 850 600 - -
263/4 1511 1673 1511 1255 640 1015 600 - -
30 1632 1800 1632 1340 650 1095 800 - -
FULL BORE REDUCED BORE SIZE END to END GEAR OPERATED LEVER OPERATED
INCHES HUB RTJ BW F C EE ØDD H L 31/8 x 21/16 337 384 337 200 140 215 400 220 500
Valves with one welding-end and one flanged-end are covered in this table.Dimension for these valves may be determined by adding half the length of the welding-ends valve to one half the length of the flanged-ends valve of the same pressure rating.
* Dimensions available upon request. Dimensions in mm.* Dimensions available upon request. Dimensions in mm.
53 54
5000
6A TOP E
NTRY
API 6ATOP ENTRY 5000 psi SIZE END to END GEAR OPERATED LEVER OPERATED
INCHES HUB RTJ BW F C EE ØDD H L 21/16 324 371 324 195 130 215 400 220 500
29/16 372 422 372 220 145 250 400 255 700
31/8 417 473 417 240 155 275 400 295 700
41/16 487 549 487 330 180 410 500 - -
51/8 595 676 595 365 205 525 500 - -
71/16 618 711 618 400 230 545 500 - -
9 738 842 738 495 285 605 500 - -
11 880 1000 880 590 320 575 600 - -
135/8 1033 1146 1033 730 355 645 600 - -
163/4 1145 1276 1145 810 435 665 600 - -
183/4 1393 1559 1393 1000 535 910 600 - -
211/4 1505 1686 1505 1090 550 990 800 - -
FULL BORE REDUCED BORE SIZE END to END GEAR OPERATED LEVER OPERATED
INCHES HUB RTJ BW F C EE ØDD H L 31/8 x 21/16 417 437 417 195 155 215 400 220 500
41/16 x 29/16 487 549 487 220 175 250 400 255 500
41/16 x 31/8 487 549 487 240 175 275 400 235 700
51/8 x 41/16 595 676 595 330 210 410 500 - -
71/16 x 41/16 618 711 618 330 220 410 500 - -
9 x 71/16 738 842 738 400 265 545 500 - -
11 x 9 880 1000 880 495 310 605 500 - -
135/8 x 11 1033 1146 1033 590 360 575 600 - -
163/4 x 135/8 1145 1276 1145 730 405 645 600 - -
183/4 x 163/4 1393 1559 1393 810 475 665 600 - -
211/4 x 183/4 1505 1686 1505 1000 535 910 600 - -
Valves with one welding-end and one flanged-end are covered in this table.Dimension for these valves may be determined by adding half the length of the welding-ends
valve to one half the length of the flanged-ends valve of the same pressure rating.
* Dimensions available upon request. Dimensions in mm.* Dimensions available upon request. Dimensions in mm.
55 56
1000
06A TO
P ENT
RY
API 6ATOP ENTRY
FULL BORE REDUCED BORE
10000 psi SIZE END to END GEAR OPERATED LEVER OPERATED
INCHES HUB RTJ BW F C EE ØDD H L 113/16 421 464 421 220 115 225 400 220 500
21/16 476 521 476 260 135 275 400 - -
29/16 513 565 513 305 180 345 500 - -
31/16 560 619 560 305 180 345 500 - -
41/16 599 670 599 390 205 460 500 - -
51/8 809 889 809 485 285 645 500 - -
71/16 934 1038 934 600 325 660 600 - -
9 1171 1295 1171 750 430 760 600 - -
11 1407 1549 1407 880 445 855 600 - -
135/8 1495 1664 1495 1080 530 995 800 - -
163/4 * * * 1235 590 1075 800 - -
183/4 * * * 1235 600 1075 800 - -
211/4 * * * 1645 605 1090 800 - -
SIZE END to END GEAR OPERATED LEVER OPERATED
INCHES HUB RTJ BW F C EE ØDD H L 21/16 x 113/16 476 521 476 220 120 225 400 220 500
Valves with one welding-end and one flanged-end are covered in this table.Dimension for these valves may be determined by adding half the length of the welding-ends valve to one half the length of the flanged-ends valve of the same pressure rating.
* Dimensions available upon request. Dimensions in mm.* Dimensions available upon request. Dimensions in mm.
57 58
6A15
000
TOP E
NTRY
API 6ATOP ENTRY
FULL BORE REDUCED BORE
15000 psi SIZE END to END GEAR OPERATED LEVER OPERATED
INCHES HUB RTJ BW F C EE ØDD H L 113/16 414 457 414 270 130 270 400 - -
21/16 470 521 470 325 170 345 500 - -
29/16 475 533 475 380 225 415 500 - -
31/16 533 598 533 380 225 415 500 - -
41/16 658 737 658 490 260 650 500 - -
51/8 790 889 790 600 355 695 600 - -
71/16 918 1038 918 745 405 805 600 - -
9 1149 1295 1149 940 535 960 600 - -
11 1361 1549 1361 1100 555 1055 800 - -
135/8 1459 1664 1459 1350 665 1225 800 - -
183/4 * * * 1540 750 1320 800 - -
SIZE END to END GEAR OPERATED LEVER OPERATED
INCHES HUB RTJ BW F C EE ØDD H L 21/16 x 113/16 470 521 470 270 130 270 400 - -
29/16 x 113/16 475 533 475 270 130 270 400 - -
31/16 x 21/16 533 598 533 325 170 345 500 - -
41/16 x 31/16 658 737 658 380 225 415 500 - -
51/8 x 41/16 790 889 790 490 260 650 500 - -
71/16 x 51/8 918 1038 918 600 355 695 600 - -
9 x 71/16 1295 1295 1149 745 405 805 600 - -
11 x 9 1549 1549 1361 940 535 960 600 - -
135/8 x 11 1664 1664 1459 1100 555 1055 800 - -
183/4 x 135/8 * * * 1350 665 1225 800 - -
Valves with one welding-end and one flanged-end are covered in this table.Dimension for these valves may be determined by adding half the length of the welding-ends valve to one half the length of the flanged-ends valve of the same pressure rating.
* Dimensions available upon request. Dimensions in mm.* Dimensions available upon request. Dimensions in mm.
59
API 6ATOP ENTRY
FULL BORE
20000 psi SIZE END to END GEAR OPERATED LEVER OPERATED
INCHES HUB RTJ BW F C EE ØDD H L 113/16 469 533 469 320 155 315 400 - -
21/16 512 584 512 385 200 400 500 - -
29/16 593 673 593 450 265 485 500 - -
31/16 689 775 689 450 265 485 500 - -
41/16 769 876 769 580 305 745 500 - -
71/16 1104 1270 1104 885 480 945 600 - -
9 1623 1828 1623 115 635 1130 800 - -
11 * * * 1305 660 1235 800 - -
135/8 * * * 1600 785 1430 800 - -
REDUCED BORE
60
6A20
000
TOP E
NTRY
SIZE END to END GEAR OPERATED LEVER OPERATED
INCHES HUB RTJ BW F C EE ØDD H L 21/16 x 113/16 512 584 512 320 155 315 400 - -
29/16 x 113/16 593 673 593 320 155 315 400 - -
31/16 x 21/16 689 775 689 385 200 400 500 - -
31/16 x 29/16 689 775 689 450 265 485 500 - -
41/16 x 31/16 769 876 769 450 265 485 500 - -
71/16 x 41/16 1104 1270 1104 580 330 745 500 - -
9 x 71/16 1623 1828 1623 885 480 945 600 - -
11 x 9 * * * 1115 635 1130 800 - -
Valves with one welding-end and one flanged-end are covered in this table.Dimension for these valves may be determined by adding half the length of the welding-ends valve to one half the length of the flanged-ends valve of the same pressure rating.
* Dimensions available upon request. Dimensions in mm.
Valves with one welding-end and one flanged-end are covered in this table.Dimension for these valves may be determined by adding half the length of the welding-ends
valve to one half the length of the flanged-ends valve of the same pressure rating.
* Dimensions available upon request. Dimensions in mm.* Dimensions available upon request. Dimensions in mm.
65 66
6A30
00SP
LIT BO
DY
API 6AFULL BORE REDUCED BORE
3000 psiSPLIT BODY
SIZE END to END GEAR OPERATED LEVER OPERATED
INCHES HUB RTJ BW F (C▲) C1 EE ØDD H L 21/16 324 371 324 210 120▲ 215 400 195 500
29/16 372 422 372 230 130▲ 222 400 205 500
31/8 337 384 337 240 155 255 400 - -
41/16 407 460 407 270 200 250 400 - -
51/8 503 562 503 315 240 295 500 - -
71/16 549 613 549 375 270 330 500 - -
9 668 740 668 465 315 470 500 - -
11 763 841 763 550 350 515 500 - -
135/8 880 968 880 660 410 530 600 - -
163/4 1040 1140 1040 840 500 630 600 - -
203/4 1213 1334 1213 1035 620 795 600 - -
263/4 1546 1673 1546 1220 715 910 600 - -
263/4 1665 1800 1665 1260 750 930 800 - -
SIZE END to END GEAR OPERATED LEVER OPERATED
INCHES HUB RTJ BW F (C▲) C1 EE ØDD H L 31/8 x 21/16 337 384 337 210 120▲ 215 400 195 500
Valves with one welding-end and one flanged-end are covered in this table.Dimension for these valves may be determined by adding half the length of the welding-ends valve to one half the length of the flanged-ends valve of the same pressure rating.
* Dimensions available upon request. Dimensions in mm.* Dimensions available upon request. Dimensions in mm.
67 68
5000
6A SPLIT
BODY
API 6AFULL BORE REDUCED BORE
5000 psiSPLIT BODY
SIZE END to END GEAR OPERATED LEVER OPERATED
INCHES HUB RTJ BW F (C▲) C1 EE ØDD H L 31/8 x 21/16 416 437 416 210 120▲ 215 400 190 500
Valves with one welding-end and one flanged-end are covered in this table.Dimension for these valves may be determined by adding half the length of the welding-ends
valve to one half the length of the flanged-ends valve of the same pressure rating.
* Dimensions available upon request. Dimensions in mm.* Dimensions available upon request. Dimensions in mm.
SIZE END to END GEAR OPERATED LEVER OPERATED
INCHES HUB RTJ BW F (C▲) C1 EE ØDD H L 21/16 324 371 324 210 120▲ 215 400 190 500
29/16 372 422 372 230 130▲ 225 400 205 500
31/8 416 473 416 260 175 260 400 - -
41/16 487 549 487 340 220 325 500 - -
51/8 595 676 595 390 270 445 500 - -
71/16 618 711 618 435 330 475 500 - -
9 739 842 739 540 355 545 500 - -
11 880 1000 880 670 415 555 600 - -
135/8 1018 1146 1018 735 450 590 600 - -
163/4 1146 1276 1146 755 460 630 600 - -
183/4 1393 1559 1393 940 560 745 600 - -
211/4 1505 1686 1505 1060 635 820 800 - -
69 70
1000
06A SP
LIT BO
DY
API 6AFULL BORE REDUCED BORE
10000 psiSPLIT BODY
SIZE END to END GEAR OPERATED LEVER OPERATED
INCHES HUB RTJ BW F C1 EE ØDD H L 21/16 x 113/16 479 521 479 230 170 250 400 260 500
Valves with one welding-end and one flanged-end are covered in this table.Dimension for these valves may be determined by adding half the length of the welding-ends valve to one half the length of the flanged-ends valve of the same pressure rating.
* Dimensions available upon request. Dimensions in mm.* Dimensions available upon request. Dimensions in mm.
SIZE END to END GEAR OPERATED LEVER OPERATED
INCHES HUB RTJ BW F C1 EE ØDD H L 113/16 421 464 421 230 170 250 400 260 500
21/16 479 521 479 270 200 285 400 280 500
29/16 513 565 513 325 220 325 500 - -
31/8 560 619 560 325 220 325 500 - -
41/16 599 670 599 415 200 400 500 - -
51/8 809 889 809 570 375 590 500 - -
71/16 934 1038 934 695 435 585 600 - -
9 1171 1295 1171 905 540 720 600 - -
11 1407 1549 1407 1050 615 835 600 - -
135/8 1495 1664 1495 1110 665 920 800 - -
163/4 * * * 1050 615 845 800 - -
183/4 * * * 1120 670 925 800 - -
211/4 * * * 1210 725 930 800 - -
71 72
1500
0SP
LIT BO
DY6A
API 6AFULL BORE REDUCED BORE
15000 psiSPLIT BODY
SIZE END to END GEAR OPERATED LEVER OPERATED
INCHES HUB RTJ BW F C1 EE ØDD H L 21/16 x 113/16 432 483 432 310 285 325 400 - -
29/16 x 113/16 474 533 474 310 285 325 400 - -
31/16 x 21/16 533 598 533 335 305 360 500 - -
41/16 x 31/16 658 737 658 405 340 395 500 - -
51/8 x 41/16 780 889 780 520 425 575 500 - -
71/16 x 51/8 918 1038 918 710 550 630 600 - -
9 x 71/16 1149 1295 1149 865 630 710 600 - -
11 x 9 1361 1549 1361 1130 800 910 600 - -
135/8 x 11 1459 1664 1459 1310 905 1025 800 - -
183/4 x 135/8 * * * 1385 1000 1130 800 - -
Valves with one welding-end and one flanged-end are covered in this table.Dimension for these valves may be determined by adding half the length of the welding-ends
valve to one half the length of the flanged-ends valve of the same pressure rating.
* Dimensions available upon request. Dimensions in mm.* Dimensions available upon request. Dimensions in mm.
SIZE END to END GEAR OPERATED LEVER OPERATED
INCHES HUB RTJ BW F C1 EE ØDD H L 113/16 411 457 411 310 230 325 400 - -
21/16 432 483 432 335 250 360 500 - -
29/16 474 533 474 405 270 395 500 - -
31/16 533 598 533 405 270 395 500 - -
41/16 658 737 658 520 270 575 500 - -
51/8 790 889 790 710 465 630 600 - -
71/16 918 1038 918 865 540 710 600 - -
9 1149 1295 1149 1130 675 910 600 - -
11 1361 1549 1361 1310 770 1025 800 - -
135/8 1459 1664 1459 1385 830 1130 800 - -
183/4 * * * 1400 840 1135 800 - -
73 74
2000
0SP
LIT BO
DY6A
API 6A20000 psiSPLIT BODY FULL BORE
SIZE END to END GEAR OPERATED LEVER OPERATED
INCHES HUB RTJ BW F C1 EE ØDD H L 113/16 487 533 487 330 265 370 400 - -
21/16 533 584 533 400 295 420 500 - -
29/16 615 673 615 480 320 460 500 - -
31/16 710 775 710 480 320 460 500 - -
41/16 797 876 797 620 320 655 500 - -
71/16 1150 1270 1150 1024 640 825 600 - -
9 1682 1828 1682 1340 800 1065 800 - -
11 * * * 1555 915 1205 800 - -
135/8 * * * 1640 985 1315 800 - -
REDUCED BORE SIZE END to END GEAR OPERATED LEVER OPERATED
INCHES HUB RTJ BW F C1 EE ØDD H L 21/16 X 113/16 487 584 487 330 265 370 400 - -
29/16 X 113/16 533 673 533 330 265 370 400 - -
31/8 x 21/16 615 775 615 400 295 420 500 - -
41/16 x 31/16 710 775 710 480 320 460 500 - -
51/8 x 41/16 797 876 797 480 320 460 500 - -
71/16 x 41/16 1150 1270 1150 620 350 655 500 - -
9 x 71/16 1682 1828 1682 1024 640 825 600 - -
11 x 9 * * * 1340 800 1065 800 - -
135/8 x 11 * * * 1555 915 1205 800 - - Valves with one welding-end and one flanged-end are covered in this table.
Dimension for these valves may be determined by adding half the length of the welding-ends valve to one half the length of the flanged-ends valve of the same pressure rating.
* Dimensions available upon request. Dimensions in mm.
Dimensions are subject to change or modification
75 76
SIZES: • 2” to 48”PRESSURE CLASSES: • ANSI 150 to 2500 • API 2000 psi to 15000 psi
SIZES: • 2” to 48”PRESSURE CLASSES: • ANSI 150 to 2500 • API 2000 psi to 15000 psi
VALVES FOR SUBSEA SERVICE•Ball•SlaB gate•Soft or metal Seated
VALVES FOR SUBSEA SERVICE•Ball•SlaB gate•Soft or metal Seated
SPECIALSERVICE PRODUCTS
BALL VALVE EQUIPPED WITH SUBSEA Upside view of ball valve equipped with subsea actuator
SIZES: • 2” to 80”PRESSURE CLASSES: • ANSI 150 to 4500 • API 2000 psi to 20000 psi CLADDING FOR ABRASIVE ANDCORROSIVE RESISTANCE • Stainless Steels • Nickel and Nichel Alloys • Stellite • Tungsten and Chromium carbides • Epoxy Coatings
VALVES FOR ABRASIVEAND CORROSIVE SERVICE•gate•gloBe•CheCk•Ball
NS 11” API 10000BALL VALVE WITH INCONEL 625 INTERNAL CLADDING FOR CORROSIVE SERVICE
THROUGH CONDUIT GATE VALVESDN 30”X 24”- BWClass 900
RANGE OF PRODUCTION
78
BALL VALVES - SPLIT BODYDN 20" FLGD - Class 1.500
BALLVALVESTOP ENTRYSPECIAL DN 24" FLGD Class 1.500
79 80
CHECKVALVES
- Dual plate- Swing- Tilting- Nozzle
CHOKEVALVES
VALVES FORHYDROFLUORIC
ACID
PIPELINEGATE VALVESWAFERTYPE
WAFER CHECK VALVES
- Dual plate- Swing- Nozzle
PRESSURIZEDORIFICE FITTINGS
GLOBEVALVES- Bolted Bonnet- Pressure seal
GATEVALVES- Bolted Bonnet- Pressure seal
DOUBLEEXPANDINGGATEVALVES
DEPRESSURIZEDORIFICE FITTINGS
Any information relative to any PetrolValves standard and special product is available from our commercial department upon request.
GATE - GLOBE - CHECK - BALL VALVES IN STANDARD AND SPECIAL EXECUTION ARE ALSO NORMAL PETROLVALVES PRODUCT LINE
81
PetrolValves is specialized in the production of large scale valve equipment.
RANGE OF PRODUCTION
CASTELLANZA - ITALy Main WorksOne of the biggestEuropean ValveWorkshops withan area of 80.000square meters.PetrolValves Head Offices and Manufacturing Plant and Sales department, are located North-West of Milan, near to the main Italian communica-tion infrastructures.
PETROLVALVES - USATEXASSales department,and with the support of a highly professional com-mercial team can offer direct assistance to customers on site.
PETROLVALVES - GBLONDON
Sales department,under the supervision and the total responsibility and guarantee of PetrolValves.
PETROLVALVES - POVAL (EX PMH) - ALGERIEProduction, maintenance and commercialization of valves for hydrocarbon service in Algerie under the supervision and the total responsibility and guarantee of PetrolValves.
PETROLVALVES - SAUDI ARABIA Production, commercialization and maintenance of valves
for hydrocarbon service in Saudi Arabia under the supervision and the total responsibility
and guarantee of PetrolValves.
PETROLVALVES A/S-NORWAy PetrolValves Subsidiary PlantOne of the first Norwegian valve manufacturers capable of supplying and maintaining all valves within PetrolValves range of production.PV A/S Factory in Stavanger has a completeMachining and Testing department and with the sup-port of a highly professional technical commercial team can offer direct assistance to customers on site.A comprehensive stock of small and medium sizevalves is kept in stock in their large premises to further support the Norwegian Oil and Gas Industry.