Hde 2 h-qam presentation

Rev: 100924-04

(I) HDE-2H-QAMInput: 2x HDMI & 2x YPbPrOutput: 1x QAM

(II) HDE-2C-QAMInput: 2x YPbPrOutput: 1x QAM

© 2010 Blonder Tongue Laboratories, Inc. All rights reserved. Specifications and features are subject to change without notice. Trademarks are the property of their respective owner.

1.800.523.6049 Slide # 2Blonder Tongue Laboratories, Inc. www.blondertongue.com

Description

HDE-2H-QAM (HD Encoder – 2x HDMI/YPbPr-to-QAM) accepts & auto-detects up to two (2) inputs in unencrypted HDMI[1] and YPbPr (Component) formats. The encoder, when applicable, digitizes & MPEG-2 encodes each input into a high-definition stream (HD-1080i/720p), and then multiplexes the resulting two (2) streams into one (1) output in QAM format in the 5.75-864 MHz range (CATV channels T7-T14 and 2-135).

Any combination of input multiplexing is allowed, for example, 2x HDMI or 1xHDMI + 1x YPbPr .

(2 Programs)

HDE-2C-QAM (HD Encoder – 2x YPbPr-to-QAM) is identical to HDE-2H-QAM, but it does not support the HDMI input. It accepts only two (2) inputs in YPbPr (Component) format.

[1] The encoder does not accept HDCP-encrypted HDMI input.

HD/SD MPEG-2 EncodingDolby AC-3 Audio Encoding


Front Panel

AncillaryASI Output

QAM RF Test Interfaceallows monitoring/testing of

the QAM output without service interruption

Comprehensive remote monitoring/control is accomplished using any standard Web browser via

this 10/100BaseT Ethernet interface Encoder LED

Video & Audio LEDsFor input 1 & 2

PowerLED

Featured in Broadband Gear ReportFeatured in Broadband Gear Report’’ss AtAt--thethe--Show Product News Show Product News during during the 2010 the 2010 SCTESCTE’’ss CableCable--Tec Expo.Tec Expo.

Selected by panel of industry experts as Selected by panel of industry experts as ““One to WatchOne to Watch””..


Rear Panel

1x QAM(2 Programs)

Agile 5.75 to 864 MHz+60 dBmV

Supports sub-band outputCATV channels T7-T14

EAS InputVideo/Audio from

EAS Generator

EAS ControlTriggered from the

EAS Generator

HDMI #1 & 2Supports CC[2]

YPbPr #1 & 2Supports Analog& Digital Audio[1]

[1] The encoder accepts both analog and digital audio inputs. If both inputs are present, the encoder will process the analog as the primary audio source - the digital will become the secondary audio source.

Clear HDMINo HDCP

[2] The encoder accepts analog NTSC Closed Captioning (EIA-608, also known as Line 21) from the HDMI source, digitizes and then inserts it in the MPEG-2 Transport Stream. The encoder does not support EIA-708 caption protocol.

ASILoop


Features

• Digitizes, encodes, and multiplexes up to two (2) unencrypted HDMI and/or YPbPr inputs into one digital QAM output

• Provides sub-band QAM output channels T7-T14 suitable for digital return-path applications• Compatible with NTSC analog format, and ITU Annex A & B digital QAM formats• Comprehensive GUI-based monitoring and control menu via Web browser• Real-time Dolby Digital (AC-3) audio encoding• Provides a front-panel ancillary ASI output• Supports EIA-608 Closed Captioning• Supports QAM 1024 Modulation• Supports PSIP configuration• Equipped with EAS interface


Typical Application (2x HDMI)

SatelliteReceiver #2

ClearHDMI #1

(No HDCP)


ClearHDMI #2(No HDCP)

ClosedCaptioning

EIA-608 (line 21)

2 programson Virtual channels

40.3 & 70.12

Supports PSIP configurationUser can configure RF output channel 55 to be displayed on virtual channels 40.3 and 70.15Output set to

RF Channel 55

1x QAM


Typical Application (1x HDMI & 1x YPbPr )

ClearHDMI

(No HDCP)

ClosedCaptioningEIA-608



AnalogVideo(YPbPr)

Analogand/orDigitalAudio

1x QAMOutput set to

RF Channel 55


40.3 & 70.12


Typical Application (2x YPbPr )

1x QAMOutput set to

RF Channel 55


40.3 & 70.12

DVD Playerwith YPbPr

output

Camcorderwith YPbProutput


Application (Digital Return Path)

ExistingHeadend

RF

Headend

8VSB/QAM-to-QAM Processor re-inserts the content into the standard channel lineup (Channels 2-135) (AQP)3

3

Combiner (OC series)

QAM54-864 MHz

Diplexer(DSV Series)

RFDiplexer

Content is sent to the head end over the coax via return path2

CoaxialDistribution

Network

To HeadeandviaReturn Path

2

QAMSub-band(T7-T13)

From Remote Originationvia Return Path

Content in HDMI and/or YPbPR formats is encoded and modulated into sub-band QAM (HDE-2H-QAM)1

Remote Origination

QAMSub-band(T7-T14)

HDMIContent

YPbPrContent

1


Monitoring & Control - Status Screen

The read-only “Status” screen indicates the MPEG-2 encoded status of each of the 2 inputs.


Monitoring & Control - Configuration > Video

The “Configuration > Video” screen allows user to configure, for each of the 2 inputs, the following parameters:

Bitrate: The sum of all 10 input bitrates must be less than or equal to 38.79 Mbps when selecting QAM 256 modulationClosed Captioning: Enabled, Disabled Video Filter Level: Maximum, Minimum, or DisabledGOP Size: from 1 to 20 [1]

Input Type: HDMI, Component, Disabled

[1] GOP (Group Of Pictures) specifies the order in which intra-frames & and inter-frames are arranged. Each MPEG-coded video stream consists of successive GOPs. From the MPEG pictures contained in it the visible frames are generated. A GOP can contain the following picture types:I-picture or I-frame (intra coded picture) P-picture or P-frame (predictive coded picture)B-picture or B-frame (bidirectionally predictive coded picture)


Monitoring & Control - Configuration > PSIP & QAM

The “Configuration > PSIP” screen allows user to assign desired channel name, major channel #, and minor channel # to each of the 2 inputs.

This provides user with complete flexibility to position any input on any virtual channel.

The “QAM” screen allows user to configure the following QAM RF parameters:

RF Channel (T7-T14 and 2-135)Output (On, Off, CW)Output LevelQAM Mode (16,32,64,128,256,512, 1024)


Ordering & Contact Information

Model Stock DescriptionHDE-2H-QAM 6375 2x HDMI & YPbPr-to-QAM EncoderHDE-2C-QAM 6377 2x YPbPr-to-QAM Encoder

Sales RepresentativesUSA - Western Territory ManagerMike Maffei [email protected] | 800-523-6049 ext 4376

USA - Eastern Territory ManagerTom Lowden [email protected] | 800-523-6049 ext 4375

Director - CATV Sales & Special MarketsSteve Cimino [email protected] | 858-505-1318 ; 858-531-2997 (mobile)

Vice President – Sales & Service ManagementJeff Smith [email protected] | 512-238-6973 ; 732-491-5657 (mobile)

Customer Service [email protected] | 800-523-6049 exts 4220 & 4320

Outside the USA [email protected]

Hde 2 h-qam presentation

Technology

digital qam output

qam output set

hqam hd encoder

cqam hd encoder

hdmi source

subband qam hde

aqpblonder tongue laboratories

rf output channel