HDCVI CONFIGURATION

HDCVI CONFIGURATION

1.LAN CONFIGURATION 2.ROUTER CONFIGURATION 3.DDNS AND P2P CONFIGURATION 4.SMART PSS CONFIGULARATION 5.3G CONFIGURATION. 6.MOBILE CONFIGURATION 7.SYSTEM UPGRADE 8.DATE AND TIME SETTINGS 9.DISPLAY SETTING 10.TOUR SETTINGS 11.RECORD SETTING 12.CHANNEL MODE 13.ABNORMALITY 14.PLAYBACK AND BACKUP 15.PASSWORD RESET

1.LAN CONFIGURATION Connect the DVR / NVR to router/switch through a lan cable. On your PC >> Start >> Run >> cmd >> ipconfig According to the *

default gateway IP assign your device an IP in the same range.

For eg. If the default gateway is : 192.168.1.1 . Then device IP will be:

192.168.1.108

Dvr default ip Address is 192.168.1.108.

Client software is pss/smart pss.

Dvr default user: admin , password: admin.

2.ROUTER CONFIGURATION Open the router page in browser (ex. 192.168.1.1)

Login the router page.

Goto advanced setup >> Disable the Firewall and spi.

(Single Dvr Config) Advanced setup >> Enable the DMZ >> Enter the Dvr

ip address >> (Ex: 192.168.1.108) < SAVE.

(Multi Dvr Config) Goto Virtual Server >>Enter the rule, Start port, End

port, Ip address >> Save. Do the same settings all dvr tcp port and http

ports.

Enter the ping.eu in brower

Goto port check enter the router wan ip and port no (37777 & 80) .

Click GO then port is open.

Now goto in dvr ddns page.,,,,,

3.DDNS AND P2P CONFIGURATION

DDNS CONFIGURATION

Main menu >> Network >> DDNS >> Enable >> The ddns type is:

Hifocus ddns-free >> enter the Domain Name (ex: abj123) >> Apply >>

Now Internet Status is Connected.

P2P CONFIGURATION

Menu >> Network >> tcp/ip >> Disable DHCP

Assign local IP to the device

Enable the P2P >> now p2p status is Online.

4.SMART PSS CONFIGURATION

Open the smart pss >> Devices >> Refresh >> Select the ip then add >>

After adding status will be online …

Now click the device list >> click the camera for live view in pss

Devices >> Manual add >> Enter the dvr device name ,register mode (ip/domain)

port, user name, password

Devices >> Manual add >> Enter the dvr device name ,register mode(P2P), user

name, password

5. 3G CONFIGURATION

Main menu >> Network >> 3g >>

Network type : Auto

Authentification : No auth

Apn : (depend on Network)

Dial No : (depend on Network )

After dial up you will get the dynamic ip address >> then go to p2p >> status is

online >> then follow the p2p mobile settings.

6.MOBILE CONFIGURATION

Android : Gdmss Lite.

Iphone : Idmss Lite

Windows : Wdmss Lite.

Blackbery : Bdmss Lite.

install the Application play store/app store.

1. DDNS CONFIGURATION Name: Anything

Register Mode : Ip Domain

Address: (Ex: hifocus123.hifocus ddns .com)

Port : 37777.

User name : admin

Password : admin

2. P2P CONFIGURATION Name: Anything

Register Mode : p2p

Address: (Ex:1c02a39papiv6ke)

User name : admin

Password : admin

7.SYSTEM UPGRADE

Main menu >> System >> Rename the original file to update.bin

Then start update…….

After rebooting update will successfully…

8.DATE & TIME SETTING

Main menu >> System >> General >> Change the current date and time save

and apply

9.DISPLAY SETTING

Main menu >> System >> Display >> Select the default resolution 1024x768

for support all VGA & HDMI output

10.TOUR SETTING

Main menu >> System >> Display >> Tour setup >> Enable the tour and

select the tour type and channels

11.RECORD SETTING

Main menu >> Storage >> Schedule >> Enable the regular and select all channels

for continuous recording.

MOTION RECORDING

Main menu >> Storage >> Schedule >> Enable the motion detection for a

period of recording as you recuired

Above the image will showing after enableing motion detection.

12.CHANNEL MODE

Main menu >> Camera >> Channel Type >> Coaxial support for both analog &

hdcvi camera. For ip camera select ip chennal mode.

13.ABNORMALITY

Main menu >> Event >> Abnormality >> Disable the beep sound in start up

without harddisk & hdd error..

14.PLAYBACK & BACKUP

Main menu >> Search >> Select the date and channel No. Search and click

the file which time your recuired ….Then you will see the playback of the

file.

Main menu >> Back up >> Now select the channel then start date ,time and

end date, time now click Add …after files show beleow select the file and click

start back up….now files will be copyied to your pendrive………

15. PASSWORD RESET

Main menu >> System >> Account >> User >> Modify(admin user) >> Enable

the Modify password >> Old password (enter the 6 digit reset code) >> New

password(Enter the new password) >> Confirm password(Enter the new

password) >> Save . successfully modified password.