HD-CCTV DVR

ENGLISH

1

HD-CCTV DVR

Quick Guide (EN Rev 1.7)

Hybrid DVR Series

ENGLISH

2

Components Please check the below to make sure you have every component.

DVR Remote Control & Batteries Mouse power cord

PoC Adaptor * Rack bracket(optional) *

screw

SD video input extension

cable (*)

SW & Manual CD

Quick guide

* Varies between different models

Before using the product, Please read the below carefully before using this product.

Don’t use the product outdoors.

Don’t spill water or liquid on connecting part of the product

Don’t place heavy objects or damage the product.

Do not pull out the power plug forcibly.

Do not disassemble the product by yourself.

Don’t use in excess of stated power I/O range.

Use a certified power cord only.

Use ground power plug.

A-class Equipment (Broadcasting Communication Equipment for Industrial use only)

Users should understand this is A-class broadcasting communication equipment for industrial use only and

must not be used for home use.

Connecting different components

ENGLISH

3

HDMI Monitor connection 1920X1080p resolution is suppoeted. Please check if monitor can support this resolution before connection.

DVR’s video output : 1920 x 1080p

<Warning>

Use of HDMI certified cable is recommended when connecting to a HDMI Monitor.

VGA Monitor connection 800X600, 1024X768, 1280X1024, 1920X1080 resolution is suppoeted. Please check if monitor can support this

resolution before connection. (4ch models supports only 1920 x 1080 resolution)

VGA output resolution change in the menu

[FUNC menu - tool – VGA resolution] click then select preferable resolution and reboot DVR.

VGA output resolution change by remote control

Press [FUNC-4-2-3-1-4-X-FUNC-MULTI] key in order to change VGA resolution.(based on X value)

X : 1 800x600

X : 2 1024x768

X : 3 1280x1024

X : 4 1920x1280

Connecting to a camera Please connect HD-SDI(1080P/720P), AHD* (1080P/720P), EX-SDI (1080P/720P), 960H, NTSC/PAL camera using

the recommended cable

* Adopted differently based on product specification.

<Note>

PoC models need additional “SD input video extension cable” in case 960H, NTSC/PAL type cameras are

connected and viewed.

Recommended Cables

* Depends on manufacturer and models.

<Warning>

Transmission distance will be affected by cable types and installation site environment

Transmission distance of cables shows differences based on the attenuation factor at 750MHz.

(dB/100m < 25dB is recommended)

Foamed or high-foamed trishield cable is recommended.

Coaxial cable and BNC connector must have 75Ω impedance.

Careful to cable deformation due to high pressure over the cable.

Don’t pull the cable with too much force.

During the arrangement of the coaxial cables at the rear of the rack, if tied too tightly, inside/outside

insulator of cable could be deformed, so tie it loosely within cable’s curvature range.

Cable Category HD-SDI transmit

distance(*)

EX-SDI transmit

distance(*)

Applications

5C2V about 90M about 150M Analog cable

4C-FB(T), 4C-HFB(T),

RG59

about 140M about 280M High-foamed cable (Double or

Trishield recommended)

5C-FB(T), 5C-HFB, L-

6CHD, RG6

about 180M about 360M Cable for HD-SDI

5C-HFBT about 200M about 400M ~ 500M Cable for HD-SDI

ENGLISH

4

HDD registration and format

If DVR is powered after HDD installation, it shows “Disk manager”

automatically. (It takes approx. 1minutes after power)

If it doesn’t run, please check the connectivity of HDD

(1) Select a HDD among listed HDDs. Activate the HDD and

execute format.

(2) Check “YES” for the fomatted HDD..

<warning>

Please call Webgate or Webgate dealers for HDD compatibility

Copy

In case backup media is well connected, click [Copy] button in FUNC

menu and back media is auto detected.

Process of Copy

Inserting USB disk to DVR’s USD port Select “EXE” as type

Select the channels to copy Decide the period to copy Select

USB disk at Disk List Click Start

Connecting to Network

menu system disk

copy

ENGLISH

5

Network settings

IP Address

IP address is used for the communication between DVR and

Control Center, and it is used for Webviewer to connect DVR.

Also Netmask, Gateway addresses given fromt the network

administrator should be properly configured. (When DHCP is

enabled, this item will be disabled)

Net Mask

Net Mask defines the communication range of IP address. This

information should be given from the network administrator.

(When DHCP is enabled, this item will be disabled)

Gateway

DVR should have proper Gateway address to communicate with

external network. This information should be given from the

network administrator. (When DHCP is enabled, this item will be

disabled)

DNS

DVR should have proper DNS address to use various network

services such as WRS, NTP, e-mail and so on. Please ask this

information to network administrator. (When DHCP is enabled,

this item will be disabled)

DDNS

User can give a domain name to a DVR by using WEBGATE’s

DDNS service, WNS(Webgate Naming Service).

DDNS setting at a DVR

1. Change DVR’s port which is not in use (e.g. 8000)

2. Configure router’s port forwarding setting. (i.e. port 8000

should be connected to DVR)

3. Activate DDNS(WNS) at DVR menu

4. Enter domain to use then click on”change domain”.(Ex: test)

5. If the entered domain name is available, DVR shows “Success”.

If the domain name is occupied by another user, DVR shows

“Unavailable domain”.

6. If you can connect a DVR by using assigned domain name, it

means DDNS setting is properly completed.

(e.g. http://test.mycam.to:8000)

<Note>

It takes about 10 min to be connected after domain created.

Menu Network DDNS DDNS setting at DVR

menu network network Ethernet

ENGLISH

6

Record Configuration

Continuous Recording - The maximum recording performance for Normal and Event recording

1. Menu > Record > Record > Continuous Record > Program A > Program Edit

2. Select Program “A” and set all channels as Normal Record “FPS 30, Quality 7”, Event Record “FPS 30, Quality

7”

(Recording performance may be different according to DVR models)

Long-term Recording - The minimum recording performance for Normal recording

1. Menu > Record > Record > Continuous Record > Program B > Program Edit

2. Select Program “B” and set all channels as Normal Record “FPS 1, Quality 7”, Event Record “FPS 15, Quality

7”

Maxium Long-term Recording - Recording only for event

1. Menu > Record > Record > Continuous Record > Program C > Program Edit

2. Menu > Record > Record > Pre Event Duration 5sec > Post Event Duration 5sec > Program Edit

3. Select Program “C” and set all channels as Normal Record “FPS 0, Quality 7”, Event Record “FPS 15, Quality

7”

Menu Record Program

ENGLISH

7

Playback

name function description

1 Playback button Use buttons to control the playback.

2 screen Displays the playback videos.

3

log viewer Displays the log seen on timeline

Calendar/time

search

Select a date on the calendar to view the data of the date.

4 timeline Displays the info of the unit and search the playback sections.

Search

ENGLISH

8

Time search

If the user enter a date and time and click , DVR’s playback

time moves to that time.

Calendar search

When calendar search is run, it marks the dates on which there were

recordings.

Select a date from calendar you want to search, and it moves to

that date.

Event search

Event information on timeline(All, Motion, Sensor, Text, None) will

be shown on log viewer. If the user select one of the list, DVR’s

playback time moves to the event time.

Timeline search

If the user clicks a position on the timeline, DVR’s playback time

moves to that time.

Thumbnail Search

Thumbnail search will show 35 different thumbnail image on

detected images by time interval or motion. Click on selected image

for playback or copy.

• Time interval : 35ea thumbnail images are displayed by searching

image between entered start and end time.

• Motion detection : 35ea thumbnail images are displayed by

searching image on the motion between entered start and end

time.

ENGLISH

9

Remote monitoring & control Users can connect DVRs, control and monitor it remotely by using Control Center (WEBGATE’s CMS program)

Installation of Control Center Execute “Control Center Setup vx.x.x.exe” to install the Control Center.

Start of Control Center After installation is completed, click “Control Center Monitor” icon and execute it.

(ID : admin / Password : admin)

Screen configuration of Control Center

Item Description

1 Menu/Toolbar This is menu and function button used in program

2 Unit list window This indicates unit/viewset/map registered in program. User can click on the list to show image

3 Image window This indicates live monitoring image

4 Status & Action

window

This indicates status of unit, event information and alarm log

ENGLISH

10

Add Unit Click [Add] icon on the toolbar or execute [Add

Unit] by clicking mouse right button at “My Units”.

1) Select “URL/IP Adress”

2) Enter proper IP address and Port, then click [Find]

button. If the DVR is located inside local network,

you can easily find the DVR by clicking [Auto

Detect] button.

3) Check whether the unit’s information is properly

displayed.

4) Enter DVR’s ID and pasword, then click [OK].

5) DVR will be listed on the unit list of “My Units”.

(DVR’ Default ID/Password is admin/12345)

DVR’s Live display If you click a unit’s icon in the “My Units”, you can get live monitoring display. Split-screen will be displayed to

show all channels of the unit.

21

All channel display at the same time

① If you click a unit’s icon, all channels' video will be displayed on the split-screen.

Display a specific one channel

① If you drag a camera icon and drop it to one of split-screen, video from the camera will be displayed on the

screen.

ENGLISH

11

Port Forwarding & P2P Cloud Manual port forwarding

(1) Connect to a router by default IP address.

(2) Go to “Port range forward” setup page.

(3) Set DVR IP address & Port of DVR connected to the router then check ‘Enable’ and save.

(4) Connect to IP and Port number of DVR which are assigned from PC to router.There will be Webviewer

login page once DVR connection is successful. (DVR default port : 80)

(5) Check the router's internet address (Public IP address) to access to the DVR from external network.

ENGLISH

12

(6) Connect to external internet IP address of router and DVR’s setup port. If DVR connection is

successful, you may see Webviewer’s login page of DVR.

(7) Enter ID and Password of DVR의 to see monitoring page in which live image of DVR is displayed.

UPnP port forwarding

When using Internet Sharing device(Router) which supports UPnP, this function will let users to have an easy

access to many DVRs that are connected to the internet sharing device.

(1) Set DHCP ON for DVR(A) and DVR(B).

(2) Connect a DVR to an Internet Sharing Device and confirm that a public IP address is allocated.

(3) Set 81 to DVR(A) and 82 to DVR(B) as DVR port number.

(4) Configure UPnP function of Internet Sharing Device as “ON”.

(5) Configure UPnP Port Forwarding function of DVR as “ON”.

(6) Confirm Port Forwarding Status message is changed from “Not Available” to “Port Mapping is OK”.

(7) If a user accesses to Internet Sharing Device using port 81, it connects to DVR(A), and if accessed

using port 82, it connects to DVR(B).

P2P Cloud *

Users can easily connect DVRs through Mobile

application, WebEye, and can perform monitoring.

(1) Execute WebEye, click Add(+) button and select

P2P tab.

(2) Enter a Unit name and the UID. User can directly

enter the UID from the UID sticker sticking on DVR

cover. Alternatively, user can find the UID by clicking

P2P cloud button at DVR menu > Network, or user

may take a picture of QR code.

(3) Enter the DVR password first. Then clicking the

Find button will show DVR name and model name.

(4) Save the setting and click the registered unit in

order to see the video

* Varies between different models

ENGLISH

13

The World’s first certified by HDcctv Alliance

Premium to your HD-CCTV

W E B G A T E

WEBGATE Div, Daemyung Corporation Co., Ltd.

6F,Hanlim Venture Town B/D, 284, Gongdan-ro, Gunpo-si, Gyeonggi-do, Korea(15809)

Tel +82. 31. 428. 9383

Fax +82. 31. 455. 3955

[email protected]

www.webgateinc.com