Hazardous Waste Management Bowling Green State University.

Hazardous Waste Management

Bowling Green State University

Resource Conservationand Recovery Act (RCRA)

“Cradle to grave”

management of

hazardous wastes

Hazardous and SolidWaste Amendments (HSWA)

Established three categories of generators• Large quantity generators (LQGs)

(Generate 2,200 or more pounds of hazardous waste in a calendar month)

• Small quantity generators (SQGs)

(Generate more than 220 pounds but less than 2,200 pounds of hazardous waste in a calendar month)

• Conditionally exempt generators (CEGs)

(Generate no more than 220 pounds of hazardous waste in a calendar month)

HazardousWaste Defined

Listed Wastes – Specificand Nonspecific Sources

“F” listed wastes

“K” listed wastes

“P” listed wastes

“U” listed wastes

“F” Listed Wastes

• Non-specific sources

• Wastes from common manufacturing and industrial processes– Example: solvents that have been used in

cleaning or degreasing operations.

• Wastes included on the F-list can be found in the regulations at 40 CFR §261.31

“K” Listed Wastes

• This list includes certain wastes from specific industries, such as petroleum refining or pesticide manufacturing.– Certain sludges and wastewaters from

treatment and production processes in these industries are examples of source-specific wastes.

“P” & “U” Listed Wastes

• Must be an unused commercial chemical product.

• The difference between the “P” and “U” lists lies in the toxicity of the product. The acutely toxic products are on the P-list and less toxic products are on the U-list.

http://www.epa.gov/osw/hazard/wastetypes/pdfs/listing-ref.pdf

Characteristic Wastes

1. Ignitable (D001 Waste Code)• Flash point <140oF

2. Corrosive (D002 Waste Code)• pH < 2 or > 12.5

3. Reactive (D003 Waste Code)• Unstable

• Air/water reactive

4. Toxic (D004-D043 Waste Codes)• Heavy metals

• Certain pesticides

Hazardous Waste Management Plan for BGSU

• Divided into two phases.– Phase I: considered as the operational segment and

will involve the identification, collection, storage, and final disposal of hazardous wastes which are generated.

– Phase II: In addressing the overall picture of a hazardous waste management program, a main emphasis must be placed on waste minimization.

Phase I

• Determine the quantities of hazardous wastes currently on-campus

• Departments that are identified as waste generators will be requested to select a departmental liaison.

Phase II

• Emphasis must be placed on waste minimization.

–Recycling

–Alteration in Experimentation

–Neutralization

Identification

• Who• What• When• Where• Quantity

Storage of Hazardous Waste

Hazardous WasteStorage Facility

(HWF)

Transportation(Off-site)

Disposal• Disposal is performed by BGSU’s hazardous

waste disposal contractor– Options

• EPA approved landfill

• deep well injection

• incineration

• other thermal destruction

• chemical treatment

Waste Minimization Program

1.) Substitution

2.) Micro-quantities

3.) Drain disposal

4.) Recycling

5.) Neutralization

Substitution• 1,2,4-Trichlorobenzene

• 1,2,4,5-Tetrachlorobenzene

• 2,4,5-Trichlorophenol

• 4-Bromophenyl phenyl ether

• Acenaphthene

• Acenaphthylene

• Anthracene

• Benzo(g,h,i)perylene

• Dibenzofuran

• Dioxins/Furans

• Endosulfan

• Fluorene

• Heptachlor

• Hexachlorobenzene

• Hexachlorobutadiene

• Hexachlorocyclohexane, gamma-

• Hexachloroethane

• Methoxychlor

• Naphthalene

• Pendimethalin

• Pentachlorobenzene

• Pentachloronitrobenzene

• Pentachlorophenol

• Phenanthrene

• Polycyclic Aromatic Compounts (PAC’s)

• Pyrene

• Trifluralin

• Cadmium

• Lead

• Mercury

OrphanChemical Program

• reduce disposal costs

• reduces purchasing costs for new materials