Harmonic filters FN 3420 / FN 3430 ECOsine™ Active - the compact, fast, and flexible solution for better Power Quality Approvals n Global or selective compensation of harmonic currents up to the 50th order n Compensation of displacement power factor n Load balancing capability n Response time of less than 300 micro- seconds n Compact solution for easy installation and intuitive operation FN 3420: 30A to 100A UL recognized Typical applications ECOsine™ Active is the new generation of active harmonic filters (AHF). It reliably miti- gates harmonics and compensates voltage dips as well as reactive power. ECOsine™ Active’s functionality can be com- pared to waves in the ocean: If two waves of the same height and intensity meet, they can- cel each other out. The same principle can be applied also to power networks. The AHF analyzes network disturbances and provides an opposing compensation current. In doing so, ECOsine™ Active actively adapts to fluctuations and responds in less than half a millisecond. Its compact dimensions, sim- ple installation, and digital intelligence allow for a quick and straight forward integration in the most diverse applications. n Building automation n Data and banking centers n HVAC installations n Machines and automation ship propulsion n Tunnel ventilation n UPS n Motor drives n Welding equipment n Water/wastewater treatment n Automotive manufacturing Features and benefits Nominal operating voltage*: 380 to 480V ±10% (FN 3420: 3-wire) 380 to 415V ±10% (FN 3430: 4-wire) Operating frequency: 47 to 63Hz Rated compensation current: 30 to 300A @ 40°C (FN 3420) 30 to 300A @ 40°C (FN 3430) Total harmonic current distortion THID**: <5% Total demand distortion TDD: According to IEEE-519, table 10-3 Compensation capability: Odd harmonics up to the 50th order Response time: <300µs Protection category: IP20 (30 to 100A) IP54 (200 to 300A) Cooling: Forced air cooling (30 to 100A) Forced air cooling, internal liquid cooling (200 to 300A) Overload capability: 2.5x rated comp. current for 10ms (peak value) Ambient temperature: 40°C, derating up to 55°C, 2%/K Altitude: 1000m, derating up to 4000m, 1%/100m Parallel operation: Up to 5 filters Interfaces: Ethernet, RS485, ModBus Controller topology: Digital with FFT analysis Current limitation: Nominal current Current transformers (not included): 100:5 to 50000:5 Design corresponding to: UL 508, CE (LVD 2006/95/EC) MTBF @ 40°C/400V: Up to 100,000 hours Technical specifications * different ratings upon request. ** depending upon the rated compensation current of the selected filter in relation to the compensation requirement. FN 3420: 200A to 300A UL listed HyTEPS B.V. Binderseind 55a 5421CH Gemert Nederland T +31 (0)492 37 12 12 [email protected] www.hyteps.nl