Hardware fittings

Hardware fittings…

Hardware is anything which specifically used for 3 basic requirement of a building i.e. for protection , decoration and convenience .

These hardware fixture involve Door , Windows and cabinet fittings…which includes door handles , hinges , bolts , locking system.

What is hardware..?

The hardware fixture are further classified under the following categories :

Bathroom fixtures Door and windows fixtures Furniture fixtures Safety & security fixtures

Classification of fittings…

Bathroom fixtures…

Bathroom hardware fittings includes the products that are used in constructing and maintaining the bathroom appearance and decoration.

The fittings involve wash basin , showers , tubs , shelves , accessories , jet spray , sink fixtures etc.

Bathroom fittings…

Bib cock… This type of taps are generally used taps used for bathrooms and outdoors. Its ranges starts from 400rs to 1000…

2 way bib cock…

Pillar cock…

Single liver long pillar cock…

These types of tap are generally used in wash basins. There are variety of designs of pillar cock available

Self closed Pillar cock…Generation creates a modern form of pillar cocks known as self closed cocks.. we use in our daily life i.e. taps with auto close mechanism. Its range starts from 1500…

Single liver pillar cocks…The single lever mixers are an alternative for applications where the water flow is to be regulated mechanically . The fittings are designed for reliable continuous operation.. Its range starts from 800 to 5000rs.

I.R pillar cocks…The electronic wash basin tap perfectly unites both high standards of function and of design meets the highest demands of hygiene and economic efficiency. Its timeless design, contact free operation and an optionally selectable stagnation flush make it a perfect component...its price ranges from 5000rs..

Swan neck taps…These designer series category of taps comes in wide range. Its sleek and designer neck only gives it a royal touchup. Its range starts from 1000rs to 10,000…

Wash basin mixtures…These mixtures are used in wash basin for optional use of hot and cold water. Single knob mixture range starts from 1600rs and goes up to thousands…

Wall mixtures..

Without telephonic shower…

With telephonic shower...

These mixtures are used in washroom for the optional use of hot as well as cold water.

Shower cabins…These main reason behind why shower cabins are used I to separate wet area from dry area in a washroom. Its ranges starts from 5000rs/set…

Shower cabin fixtures…

Wall to glass hinges…

Glass to glass hinges…

These hinges are used in the door of shower partition unit. This is also fixed in the same way as other hinges…one is fixed and the other side of hinge rotates. It comes in 90d , 180d , 137d…

Fixed clips… These are the corner fittings for a shower partition. One side is fixed on wall while the cavity end holds the glass…

Showers…

Head shower…

Rain shower…

Hand shower…

Showers are a part of plumbing system which is provided in washroom for a refreshing bath. The main advantage of shower is it reduces the use of water. However it sprays water thus reduces water usage. There range starts from 800rs… showers are classified into :

Shower panels… These panels are used in shower areas. Its range starts from RS 35,000.

Health faucets…Health faucets is a hand-held triggered nozzle similar to that on a sink sprayer, that delivers a spray of water to assist in cleansing in wc areas.  It is usually placed in a small holder attached to the wall, on the right hand side of a flush or wc and connected via a short hose. Its range starts from 480rs.

General fittings…

Stop cock…

These hardware fittings are used in the area where we need to hold water thus to stop further flow. We can open it just by rotating a liver. Range starts from 400rs..

Waste coupling…

Waste coupling (full thread)

waste coupling (half thread)

This hardware fitting is generally used in wash basins or sinks in drainage unit. It cost goes around 200rs.

A wash basin is a bowl shaped plumbing unit which is basically used for washing hands. generally have tap (faucets) that supply hot or cold water according. They must also provided with a proper drainage system.

Wash basin are generally come in 2 varieties:

Porcelain Plastic or Resin Glass

Wash basins…

Porcelain wash basin… Porcelain is a ceramic type of material made by heating a type of clay in a temp. about 1200c to 2000c. It have supreme qualities of elasticity , strength , toughness and transparency gives it an enlighten look. Its range starts from 500rs and goes up to thousands…

Classification… Porcelain wash basins are classified into the

following types according to area , design and purpose…

Pedestal basins Wall hung basins Corner basins Over counter basins Under counter basins

Pedestal basins…Pedestal basins are tower type basins. Which consists of a tower sort of structure as a base and top as a basin. Its range starts from 1500rs.

Wall hung basins…Wall hung basins are commonly used basins in homes. It can be directly hung over 2 brackets fixed on the wall. Its range starts from 400rs.

Corner basins…Corners basins are usually used in the compact area because it can be easily hanged in any of the corner thus providing a proper circulation. it is available from 1ft dia. Its range starts from 600rs.

Over counter basins…Over counter basins can be placed over any counter top. These basins starts from 1ft dia. Its range starts from 3200rs.

Under counter basins…Under cover basins are similar to that of over counter basins. Only difference is it is fixed in the cavity in wash areas. It can generally seen in any restaurants or hotels. Its range starts from 3000rs.

Resin wash basins…Resin basins are now in full trends it comes in various patterns and sleek designs. It is basically made-up of polyester, epoxy and polyurethane. The range starts from around 2000rs and goes up to thousands according to designs.

Glass wash basins…Glass wash basins are some how expensive as compared to porcelain and resin type. It is made by molding a glass piece into a cast. Its range starts from 4800rs and goes unto 30,000rs…

Water closets…A water closet is a toilet which disposed human body waste via flush. The sanitary fixture is distinctly different which is designed to handle only liquid waste. Flushing mechanisms are found more often on western toilets & now in squad also.

Western

Indian

Western water closets…Western water closets are which modified form of toilets used in earlier days. Now a days most of the designers prefer western wc because of availability in various designs and it is more comfortable than those to Indian or squatting pan. Its range starts from 2500rs and goes unto lacks.

Indian water closets…Indian water closets are also known as squatting pan. It is generally used in earlier houses. These are very cheap according to western forms. It can also be connected with bell fast flushing cisterns. Its range starts from 600rs.

Door and window fixtures…

Door and windows fixtures are those necessary hardware elements which is required for a proper functioning of doors and windows.

The hardware involves hinges , door closers , locking system , handles etc.

Door and window fixtures…

Doors are further classified according to their uses and area where it has to be used. There are variety of door fixture providing a wide styles of door opening. Basically doors are of following types :

Hinged doors Sliding doors By fold doors

Classification of doors..

Hinged doors..Hinged doors are generally used doors in homes. It is screwed over a wooden or granite frame fixed to the wall. Some of the hardware fittings used in fixing these doors are mentioned below.

Hinged door fittings…

Hinges… There are 2 types of hinges made up of ss and brass. These hinges are used to support and hold the doors and windows and allow comfortable movements. it starts from 5rs and goes unto 80rs.

Friction hinges…Friction hinges are generally used for cupboards and upvc doors and windows. It has a spring mechanism inside. It is long run and more comfortable than normal hinges. It starts from 20rs.

Loose pin hinges…This type of hinges are generally used for hanging doors and also for windows. It is used on for light weight objects only. It range starts from 5rs.

Parliament hinges…This types of hinges are generally used for the doors which requires 180 degree opening.

Door closers…

Spring door closers…

Concealed door closer…

Door closers are used for the proper maintenance of doors. Its range starts from 800rs.

Door handles… There are variety of door handles available which starts from 100rs to thousands.

Types of locks…

Nightlatches…These locks comes in variety of designs. These locks are used for standard and narrow style doors. Open from a key from outside or from a knob inside.

Mortice lock… These are the modern form of locks which is used in most of the doors nowadays. It is easy to install.

General fittings…

Barrel bolt…Indicator bolt…

Sliding doors…Sliding door is a type of door which opens horizontally. whereby the door is either mounted on or suspended from a track. Sliding doors are commonly used for shower doors, glass doors and wardrobe doors.

Sliding door fittings…

The fittings which are used in sliding system are called sliding door gears. There are two standard types, top hung or bottom rolling systems.

Top hung Bottom rolling

Sliding door fittings…

The 'top hung' system is most often used. The door is hung by two trolley hangers at the top of the door running in a concealed track; all the weight is taken by the hangers, making the door easy to move.

Top hung sliding door..

Top hung fittings…

Sometimes a top hung system cannot be used, as the weight of the door cannot be supported from above; in this case a bottom rolling system is recommended. A bottom rolling system consists of two rollers at the bottom of the door running on a track and two guides at the top running in a guide channel. As all the weight of the door is concentrated on the two bottom wheels, more force is needed to move the door than on a top hung system

Bottom rolling sliding doors…

Bottom rolling fittings…

Glass door fittings are also called patch fittings. These comes under the category of glazed doors. Toughened glass are used in glass doors because of its toughness and rigidity.

Glass door fittings…

Patch fittings…

Bottom patch..

Bottom pivot..

Top pivot..

Top patch...

Floor spring…

Bottom rail…

Bottom rail…

Glass door handles…There are variety of glass door handles available in the market which starts from 400rs to thousands…

Outdoor glass fixtures…

Fin and splice fittings…

Fin and splice fittings…

Thank you…