Happy Camper Character and RV Camper Instructions · Character and RV Camper directions: Happy Camper Character and RV Camper Instructions Supplies*: • 4’ x 8’ insulation board
This document is posted to help you gain knowledge. Please leave a comment to let me know what you think about it! Share it to your friends and learn new things together.
Supplies*: • 4’ x 8’ insulation board• Projector• Tape• Utility knife• Meter stick• Paint – blue, light blue, red,
gray, black, white, purple, yellow, teal, orange
• 20” x 30” white foam boards• 1” x 4” x 8’ wood slat• 1” x 2“ x 8” wood slat• Saw• Nails • Hammer• Foil tape
1. Prop a 4’ x 8’ insulation board on the wall. Project and trace the characters on pages 3-6 onto the board. Cut out the characters with a utility knife and paint. (For safety purposes, we recommend wearing leather gloves when using the utility knife. Never leave the utility knife where children can pick it up.)
2. Project and trace the RV camper on page 7 onto a second insulation board so that the RV measures approximately 4’ x 8’. Cut out and paint.
3. Cut out triangular easels from the scrap insulation board and attach to the back of the standees and RV cutouts to make them stand.