PLEASE QUOTE STOCK NUMBER WHEN ORDERING THESE PRICES AND SPECIFICATIONS ARE SUBJECT TO ALTERATION WITHOUT NOTICE Hansen is one of the largest manufacturers of Industrial Refrigeration Products in the world. Manufactured in the USA and exported world wide, the Hansen brand is synonymous with quality, performance and reliability. As well as producing the normal range of valves, controls and float switches, Hansen also market a range of Auto-Purgers, Motorized Valves, Ammonia Detectors, Refrigerant Pumps (for Ammonia Carbon Dioxide and other industrial gases) and specialist controllers designed specifically for the Industrial Refrigeration Market. Bespoke Control Valves We can assemble almost any combination of valve from stocked, modular valve bodies and pilots to satisfy the majority of applications that you might require. Additionally, we are able to fit the full range of Danfoss Pilots and controllers onto the Hansen modular bodies, to meet your requirements. Most of these items are available ex-stock from our Auckland Central Warehouse and can be made up to order. Refrigerant Float Switch The HLLE refrigerant liquid level float switches are used to electrically indicate or control a liquid level, by opening or closing a SPDT switch. Their simple, reliable design provides a life time of performance for almost any application Applications—These refrigerant level float switches are typically installed on a vessel’s liquid level column. They can control liquid level by activating a liquid fill solenoid valve. Often, they are used to provide high level cut-out or alarm. They are often used to turn off a recirculating liquid pump if a low level occurs. Other applications include control of liquid level via a liquid exit solenoid valve, level indication via a pilot light, and transfer drum operation. Techni-Level Transducer Probes The Hansen Techni-Level has fast become the industry standard for liquid refrigerant level control and monitoring. These reliable, well engineered electronic level transducer probes, when properly used, operate trouble free and are not affected by reasonable changes in refrigerant temperature or pressure. They provide a computer compatible 4-20 mA (milliamp) output signal proportional to liquid level. Probes consist of a compact, electronic transmitter in a watertight housing assembled on top of a rugged, capacitance type level sensor. Normally, the probe must be inside a level column. Typical applications include: vertical and horizontal vessels, pump accumulators, pilot receivers, and refrigerant loss monitoring. These probes are operating control devices and should never be used as safety devices. Hansen Auto Purgers A variety of Auto Purgers are available from the mini Non-Electric Auto Purger (NEAP) to the Auto Purger Plus. These units reduce condensing pressure and lower power costs by removing non- condensable gas and water from Ammonia and Halocarbon refrigeration systems. HANSEN INTRODUCTION W104 January 2009
This document is posted to help you gain knowledge. Please leave a comment to let me know what you think about it! Share it to your friends and learn new things together.
Transcript
PLEASE QUOTE STOCK NUMBER WHEN ORDERING
THESE PRICES AND SPECIFICATIONS ARE SUBJECT TO ALTERATION WITHOUT NOTICE
Hansen is one of the largest manufacturers of Industrial Refrigeration Products in the world. Manufactured in the USA and exported world wide, the Hansen brand is synonymous with quality, performance and reliability. As well as producing the normal range of valves, controls and float switches, Hansen also market a range of Auto-Purgers, Motorized Valves, Ammonia Detectors, Refrigerant Pumps (for Ammonia Carbon Dioxide and other industrial gases) and specialist controllers designed specifically for the Industrial Refrigeration Market. Bespoke Control Valves We can assemble almost any combination of valve from stocked, modular valve bodies and pilots to satisfy the majority of applications that you might require. Additionally, we are able to fit the full range of Danfoss Pilots and controllers onto the Hansen modular bodies, to meet your requirements. Most of these items are available ex-stock from our Auckland Central Warehouse and can be made up to order. Refrigerant Float Switch The HLLE refrigerant liquid level float switches are used to electrically indicate or control a liquid level, by opening or closing a SPDT switch. Their simple, reliable design provides a life time of performance for almost any application Applications—These refrigerant level float switches are typically installed on a vessel’s liquid level column. They can control liquid level by activating a liquid fill solenoid valve. Often, they are used to provide high level cut-out or alarm. They are often used to turn off a recirculating liquid pump if a low level occurs. Other applications include control of liquid level via a liquid exit solenoid valve, level indication via a pilot light, and transfer drum operation. Techni-Level Transducer Probes The Hansen Techni-Level has fast become the industry standard for liquid refrigerant level control and monitoring. These reliable, well engineered electronic level transducer probes, when properly used, operate trouble free and are not affected by reasonable changes in refrigerant temperature or pressure. They provide a computer compatible 4-20 mA (milliamp) output signal proportional to liquid level. Probes consist of a compact, electronic transmitter in a watertight housing assembled on top of a rugged, capacitance type level sensor. Normally, the probe must be inside a level column. Typical applications include: vertical and horizontal vessels, pump accumulators, pilot receivers, and refrigerant loss monitoring. These probes are operating control devices and should never be used as safety devices. Hansen Auto Purgers A variety of Auto Purgers are available from the mini Non-Electric Auto Purger (NEAP) to the Auto Purger Plus. These units reduce condensing pressure and lower power costs by removing non-condensable gas and water from Ammonia and Halocarbon refrigeration systems.
HANSEN INTRODUCTION
W104January 2009
PLEASE QUOTE STOCK NUMBER WHEN ORDERING
THESE PRICES AND SPECIFICATIONS ARE SUBJECT TO ALTERATION WITHOUT NOTICE
12993 Hansen GSB051H Shut Off 15SW 12997 Hansen GSB076H Shut Off 20SW 13001 Hansen GSB100H Shut Off 25SW 13005 Hansen GSB125H Shut Off 32SW 13009 Hansen GS150H Shut Off 40SW
POA
HANSEN STOP VALVES – AMMONIA Right Angle Stop Valves – Socket Weld (SW) or Butt Weld (BW)
12994 Hansen ASB051H Shut Off 15SW 12998 Hansen ASB076H Shut Off 20SW 13002 Hansen ASB100H Shut Off 25SW 13006 Hansen ASB125H Shut Off 32SW 13010 Hansen AS150H Shut Off 40SW 13014 Hansen AS200H Shut Off 50SW 13018 Hansen AS251H Shut Off 65SW 12960 Hansen AW301H Shut Off 80BW 12964 Hansen AW402H Shut Off 100BW 12968 Hansen AW500H Shut Off 125BW 12972 Hansen AW600H Shut Off 150BW 12976 Hansen AW800H Shut Off 200BW
POA
NB for straight through, use with a 45° elbow welded to each branch. The above stop valves are also suitable for HCFCs, HFCs, and other approved refrigerants. Valves larger than 65mm are Butt Weld. Smaller valves may be of either type.
HANSEN HAND REGULATING VALVES – AMMONIA Angle or Globe Regulating Valve – Socket Weld, with Cap
13137 Hansen VSB050C Hand Exp 15SW 13141 Hansen VSB076C Hand Exp 20SW 13145 Hansen VSB100C Hand Exp 25SW 13149 Hansen VSB125C Hand Exp 32SW 13069 Hansen VS150C Hand Exp 40SW
POA
HANSEN HSCK STOP CHECK VALVES – AMMONIA Angle Stop / Check Valve - Socket Weld or Butt Weld with Cap
THESE PRICES AND SPECIFICATIONS ARE SUBJECT TO ALTERATION WITHOUT NOTICE
AMMONIA VALVES - PRESSURE REGULATORS
HANSEN PRESSURE REGULATORS
MODEL DESCRIPTION PRICE $
excl GST
17382 AR1-20 Main Valve
Single Port 20mm (3/4") Regulating Valve Body. Flange options 11929, 11933, 11936, 11932, 11942, 11943. (See Page I7 for flange Descriptions)
17383 AR1-25 Main Valve
Single Port 25mm (1") Regulating Valve Body. Flange options 11929, 11933, 11936, 11932, 11942, 11943. (See Page I7 for flange Descriptions)
17384 AR1-32 Main Valve
Single Port 32mm (1 1/4") Regulating Valve Body. Flange options 11929, 11933, 11936, 11932, 11942, 11943. (See Page I7 for flange Descriptions)
17385 AR1-40 Main Valve
Single Port 40mm (1 1/2") Regulating Valve Body. Flange options 11944, 11948, 11947, 11951. (See Page I7 for flange Descriptions)
17386 AR1-50 Main Valve
Single Port 50mm (2") Regulating Valve Body. Flange options 11944, 11948, 11947, 11951. (See Page I7 for flange Descriptions)
17387 AR1-65 Main Valve
Single Port 65mm (2 1/2") Regulating Valve Body. Flange options 11952, 11962. (See Page I7 for flange Descriptions)
19763 AR1-80 Main Valve
Single Port 80mm (3") Regulating Valve Body. Flange options 11956, 11958. (See Page I7 for flange Descriptions)
17388 AR3-20 Main Valve
Three Port 20mm (3/4") Regulating Valve Body. Flange options 11929, 11933, 11936, 11932, 11942, 11943. (See Page I7 for flange Descriptions)
17389 AR3-25 Main Valve
Three Port 25mm (1") Regulating Valve Body. Flange options 11929, 11933, 11936, 11932, 11942, 11943. (See Page I7 for flange Descriptions)
17390 AR3-32 Main Valve
Three Port 32mm (1 1/4") Regulating Valve Body. Flange options 11929, 11933, 11936, 11932, 11942, 11943. (See Page I7 for flange Descriptions)
17391 AR3-40 Main Valve
Three Port 40mm (1 1/2") Regulating Valve Body. Flange options 11944, 11948, 11947, 11951. (See Page I7 for flange Descriptions)
17392 AR3-50 Main Valve
Three Port 50mm (2") Regulating Valve Body. Flange options 11944, 11948, 11947, 11951. (See Page I7 for flange Descriptions)
17393 AR3-65 Main Valve
Three Port 65mm (2 1/2") Regulating Valve Body. Flange options 11952, 11962. (See Page I7 for flange Descriptions)
17394 AR3-80 Main
Valve Three Port 80mm (3") Regulating Valve Body. Flange options 11958, 11956. (See Page I7 for flange Descriptions) (With Flanges 3" NB)
POA
W106 January 2009
REALCOLD STOCK NO.
AR1 BODY
AR3 BODY
• AR Series are base valve bodies which can be made into a variety of Pilot and Solenoid valve combinations. The head will accept either Hansen or Danfoss Pilots as required, and will also operate with a variety of proprietary controllers
• All valves are spring closing, and have Teflon seats, with V-port modulation • Safe Working Pressure 2758 kPa G (400 psig) • Operating Temperature -40°C to 115°C (-60°F to 240°F) • Suitable for Ammonia, Carbon Dioxide, HCFCs, HFAs, and other approved refrigerants • Suitable for use with suction gas, liquid, defrost relief, discharge gas, and other applications • Additionally, Refrigeration Engineering offer complete Solenoid and Control Valves according to your
application • Contact Refrigeration Engineering to advise on suitable control combinations.
PLEASE QUOTE STOCK NUMBER WHEN ORDERING
THESE PRICES AND SPECIFICATIONS ARE SUBJECT TO ALTERATION WITHOUT NOTICE
AMMONIA CONTROL VALVE PILOTS
HANSEN INDIVIDUAL PILOT APPLICATIONS RANGE
OPTION DESCRIPTION A B C D V
Electric Shut-Off S Controls Pressure when electronically energised; closed when not energised. For
temperature control and defrost, or similar uses. Specify Voltage, Range and Special Variation if required.
Electric Wide Opening
B Controls pressure when not electrically energized; open when energized. For defrost regulation or heat recovery and wide opening for maximum cooling or similar. Specify Voltage, Range and Special Variation if required.
Dual Pressure Regulator
D Controls at lower pressure when electrically energised, at higher pressure when not energized. Used for two pressure (temperature) control or defrost pressure relief and pressure (temperature control. Specify Voltage, Range and Special Variation if required.
Differential Pressure L
For pump relief, oil control or any differential control
Outlet Pressure O Opens as outlet pressure drops. For hot gas bypass to suction, crankcase
pressure control or for other receiver pressure control.
Reseating Relief K Defrost relief or high to low system relief. Set and tagged . Specify setting or
otherwise setting will be at 70psig (4.8 Bar)
Regulator Only with External Connection for Remote Pilot R Enables a remote pressure source to be introduced to the regulator via a pilot
line (replaces a pilot).
Pneumatically Controlled P
Air pressure or other pressure in bonnet raises inlet pressure at 1:1 ratio
Electronic Control Module
Q Precise temperature control or liquid chiller control. For indoor or outdoor use. Simple design; 4-20mA control.. Transformer included. Controller options shown below. Control range 0—87psig.
Electric Motor Compensated
M Commonly used for precise room temperature control or liquid chiller control. A motor changes regulator pressure setting in accordance with temperature controller. Includes control module, Cam, motor bracket and Penn motor 4020mA standard. (Honeywell motor available)
Stopping Plug (Straight Through) M3B
To be used in a Control Port when the port is not utilised.
Stopping Plug (Stopping) M3S
To be used in a Control Port when the port is not utilised.
Range A 0 - 150 psig (0 to 10 Bar) Range B 30 - 300psig (+2 to +21 Bar) Range C 100 to 550 psig (6 - 38 Bar) Range D 30 to 450 psig (0 to 31 Bar) Range V 20” to 130 psig (-0.67 to +9 Bar)
W107 January 2009
PLEASE QUOTE STOCK NUMBER WHEN ORDERING
THESE PRICES AND SPECIFICATIONS ARE SUBJECT TO ALTERATION WITHOUT NOTICE
HANSEN PRESSURE PILOTS REALCOLD STOCK NO. MODEL DESCRIPTION PRICE $
excl GST
11794 75-1097 Hansen M3 Pilot Range A (0 To 10 Bar) 11795 75-1098 Hansen M3 Pilot Range B (2 To 21 Bar)
17401 75-1099 Hansen M3 Pilot Range V (-0.67 To 9 Bar); Outlet Pressure Control Module For All Press Regulators
18932 75-1126 Hansen M3W Pilot Range A
11796 75-1100 Hansen M3O Pilot Range V (-0.67 To 9 Bar); Outlet Pressure Control Module
11797 75-1101 Hansen M3O Pilot Range B (2 To 21 Bar); Outlet Pressure Control Module
11798 75-1103 Hansen M3K Pilot Range A (0 To 10 Bar); Reseating Relief Control Module For 40mm Press Regulator And Above
11799 75-1104 Hansen M3K Pilot Range B (2 To 21 Bar); Reseating Relief Control Module For All Press Regulators
13961 75-1081 Hansen M3P Pilot Range A (0 To 10 Bar G); M3P/L Pneumatically Compensated Or Differential Pressure; Control Module For All Press Regulators
17402 75-1064 Hansen M3B Through Blanking Plug 17403 75-1063 Hansen M3S Stopping Blanking Plug 18065 70-1100 Hansen Pilot Light Kit Red 18066 70-1102 Hansen Pilot Light Kit Green 18067 70-1101 Hansen Pilot Light Kit Amber
POA
DANFOSS PRESSURE PILOTS 16736 027B110000 Danfoss (LP) Pilot Valve 0 To 7 Bar Range; Constant Press For PM
Main Valves; 17Bar MWP; 0.4m^3/H KV
16735 027B107000 Danfoss CVC (LP) Pilot Valve 0 To 7 Bar Range; Outlet Pressue Pilot; 17Bar MWP; 0.4m^3/H KV
16739 027B111000 Danfoss CVT Pilot Valve -40 To 0 deg C Range; Temp Operated For Pm Main Valves; Opens On Rising Temp; 22 Bar MWP; 0.2m^3/H KV
16740 027B111100 Danfoss CVT Pilot Valve -10 To 25 deg C Range; Temp Operated For Pm Main Valves; Opens On Rising Temp; 22 Bar MWP; 0.2m^3/H KV
16741 027B111200 Danfoss CVT Pilot Valve 20 To 60 deg C Range; Temp Operated For Pm Main Valves; Opens On Rising Temp; 22 Bar MWP; 0.2m^3/H KV
16743 027B114000 Danfoss CVQ Pilot Valve 0 To 6 Bar Range; Electronically Operated Constant Press For PM Main Valves; 17Bar MWP; 0.45m^3/H KV
16744 027B114100 Danfoss CVQ Pilot Valve 1.7 To 8 Bar Range; Electronically Operated Constant Press For PM Main Valves; 17Bar MWP; 0.45m^3/H KV
16745 027B116000 Danfoss CVP (HP) Pilot Valve 4 To 22 Bar Range; Constant Press For Pm Main Valves + CVH Housing; 28Bar Mwp; 0.4m^3/H KV
16746 027B116200 Danfoss CVPP (HP) Pilot Valve 4 To 22 Bar Range; Differential Press For PM Main Valves; 28 Bar MWP; 0.4m^3/H KV
POA
AMMONIA VALVES - PRESSURE REGULATORS
W108January 2009
PLEASE QUOTE STOCK NUMBER WHEN ORDERING
THESE PRICES AND SPECIFICATIONS ARE SUBJECT TO ALTERATION WITHOUT NOTICE
12051 ST050 To fit 13 mm Port (less flanges) 12056 ST100 To fit 20 mm, 25 mm, 32 mm Port (less flanges) 12069 ST200 To fit 40 mm, 50 mm Port (less flanges) 12078 ST250 To fit 65 mm Port (less flanges) 12079 ST300 To fit 80mm Port (less flanges) 12080 ST400 To fit 100mm Port (less flanges)
POA
Hansen Strainers have a stainless steel screen, 60 mesh (233 micron rating). Groove inlet, tongue outlet. Safe Working Pressure: 2758 kPa (400 psig). Applications include liquid lines, hot gas lines, suction lines, and oil lines. Strainers are supplied ready to be close-coupled to solenoid valves, pressure regulators, etc. For installation as a separate unit, a flange installation kit is required (see below).
The Hansen flange system is generally interchangeable for Parker Refspec, Henry, and York/Frick flanges. A flange kit is two male (tongued) flanges (of the same size and style) to suit a Hansen flanged valve. Gaskets, bolts, and nuts are provided with the valve, or can be purchased separately.
HENRY FLANGE UNION KITS DESCRIPTION
REALCOLD STOCK NO. ITEM CONNECTION VENDOR MODEL NO. BOLTS
excl GST 17374 FAR 050 Female Adaptor Ring 17375 FAR 100 Female Adaptor Ring 17376 FAR 200 Female Adaptor Ring 17377 FAR 250 Female Adaptor Ring
POA
Female adaptor rings are used at the outlet of strainers installed as separate flange units.
HANSEN MALE ADAPTOR RINGS 17378 MAR 050 Male Adaptor Ring 17379 MAR 100 Male Adaptor Ring 17380 MAR 200 Male Adaptor Ring 17381 MAR 250 Male Adaptor Ring
POA
Male adaptor rings are used to close-couple HCK4 or HCK1 check valves to the outlet of valves and regulators.
W111 January 2009
PLEASE QUOTE STOCK NUMBER WHEN ORDERING
THESE PRICES AND SPECIFICATIONS ARE SUBJECT TO ALTERATION WITHOUT NOTICE
AMMONIA CONTROL VALVES
HANSEN CONTROL VALVES - STEEL MODEL & DESCRIPTION PRICE $ excl GST
Costs for larger valves are available on request. We are able to make up most valves up to 80mm from our stock of Control Valve bodies and pilots. Non-stock pilots can be supplied within 5-7 working days from placement of order however there may be additional courier costs.
Many Danfoss pilots and electronic controllers are also available for substitution if required. The Hansen modular control head is designed to fit both ranges of control pilots.
W112 January 2009
HA4A
HA4AB
HA4AD
PLEASE QUOTE STOCK NUMBER WHEN ORDERING
THESE PRICES AND SPECIFICATIONS ARE SUBJECT TO ALTERATION WITHOUT NOTICE
HS6-4 Pilot Operated Solenoid 3/8" SW 10925 376.00 10929 HS8A-13 Pilot Operated Solenoid 1/2” SW 10949 447.00 10953 HS8A-13 Pilot Operated Solenoid 3/4SW 10965 447.00 10969 HS7-20 Pilot Operated Solenoid 3/4 SW 10973 555.00 10977 HS7-25 Pilot Operated Solenoid 1” SW 11033 807.00 11037 HS7-32 Pilot Operated Solenoid 11/4”SW 11075 997.00 11079
POA
HANSEN SOLENOID VALVES - Higher Capacity
MODEL & DESCRIPTION PRICE $ excl GST
VALVE FLANGE SIZE REALCOLD
STOCK NO. WITHOUT STRAINER
REALCOLD STOCK NO.
WITH STRAINER
HS4A-20 Pilot Operated Solenoid 3/8” SW 11105 691.00 11109 HS4A-25 Pilot Operated Solenoid 1” SW 11165 895.00 11169 HS4A-32 Pilot Operated Solenoid 1 1/4” SW 11207 1,082.00 11211 HS4A-40 Pilot Operated Solenoid 1 1/2” SW 11237 1,518.00 11241 HS4A-50 Pilot Operated Solenoid 2” SW 11279 1,664.00 11283 HS4A-65 Pilot Operated Solenoid 2 1/2” SW 11303 2,289.00 11307 HS4A-80 Pilot Operated Solenoid 3” SW 11345 3,325.00 11349
POA
HANSEN FEATURES AND SELECTION • All Hansen valves are spring closing and have Teflon seats. • Safe Working Pressure 2758 kPag (400 psig) • MOPD 2068 kPag (300 psig) • Operating Temperature -50°C to +115°C (-60°F to +240°F) • Suitable for ammonia, Carbon Dioxide, HCFCs, HFAs, and other approved refrigerants. For special duties
such as Carbon Dioxide, please contact Refrigeration Engineering. • All valves supplied with 230V 50 Hz coil, complete with DIN plug. Coils are also available in 115VAC,
24VAC and 24VDC and can be changed for a nominal charge of $15.00 per coil. For non-DIN coils and Conduit Fitting coils please refer to Refrigeration Engineering.
• All valves supplied as standard with Socket Weld (SW) flanges to suit Carbon Steel ASTM A106 or API line pipe. Can also be supplied with Weld Neck, FPT (Female Pipe Thread) or ODS connections to suit Copper Pipe. Flanges may be sized slightly larger or smaller than the valves dependent on application.
• Strainers, either close coupled or separate, are available – See Page I9
W113 January 2009
PLEASE QUOTE STOCK NUMBER WHEN ORDERING
THESE PRICES AND SPECIFICATIONS ARE SUBJECT TO ALTERATION WITHOUT NOTICE
11793 Hansen HGV1Gauge Valve 1/4" MPT long neck screwed male and female 12780 Hansen H7771 Gauge Valve1/4" MPT Screwed male and female C/W Seal cap 12783 Hansen H7773 Gauge Valve 3/8" MPT Screwed male and female C/W Seal cap 12784 Hansen H7774 Gauge Valve 3/8" FPT Screwed female C/W Seal cap
POA
GAUGE VALVES (ANGLE) HENRY REALCOLD STOCK NO. DESCRIPTION PRICE $
excl GST
19561 Henry 7771 Gauge Valve 1/4" NPT Screwed male and female 19571 Henry 7773 Gauge Valve 3/8" NPT Screwed male and female 17694 Henry 7775 Gauge Valve 1/2" NPT Screwed male and female
POA
TRANSDUCER VALVES HANSEN AND HENRY 12779 Hansen H9490 Transducer Valve; 8mm (1/4in) MPT Inlet X FPT Gauge Port X FPT
Transducer Port; With Seal Cap
Henry 9490 Transducer Valve; 8mm (1/4in) MPT Inlet X FPT Gauge Port X FPT Transducer Port; With Seal Cap
POA
THREE WAY HAND SHUT-OFF VALVES REALCOLD STOCK NO. DESCRIPTION MODEL PRICE $
excl GST
12833 Hansen Steel 1/2" FPT Type H8021 12835 Hansen Steel 1" FPT Type H8024 12836 Hansen Steel 1 1/4" FPT Type H8025
12874 HLLE Float Switch Assembly 3/4" FPT/1" Butt Weld (See Spares Section for Spare Switch only) POA
HANSEN TECHNI-LEVEL® LEVEL TRANSDUCER PROBES 12916 VLT-04 Active Probe Length 1020 mm 12917 VLT-06 Active Probe Length 1525 mm 12918 VLT-08 Active Probe Length 2030 mm 12919 VLT-10 Active Probe Length 2540 mm 12913 VLT-XX Active Probe Length Cut to Suit Length
POA
Hansen Level Probes are available in other standard lengths. Please contact your Local Branch to discuss yourrequirements.
HENRY LIQUID LEVEL SWITCH REALCOLD STOCK NO. MODEL DESCRIPTION PRICE $
excl GST Safe, economical observation and electronic control of liquid level. Designed for halocarbon and ammonia applications.
17695 Henry 9420-1 1 inch Liquid Level Switch 208/240 V 50/60HZ; .25 amp resistive rating Normally Closed
17696 Henry 9420A-1 1 inch Liquid Level Switch 208/240 V 50/60HZ; .25 amp resistive rating Normally Open
17925 Henry 9420 1/2 inch Liquid Level Switch 208/240 V 50/60HZ; .25 amp resistive rating Normally Closed
POA
INDUSTRIAL SIGHT GLASSES - STEEL 12321 Phillips 1100-R Level Eye Assembly, Bulls-Eye Lens (50 mm long housing) 12336 Phillips 1100 Level Eye Assembly, Clear Lens (50 mm long housing) 12947 Hansen H1100-R See-Level Assembly (82.5 mm long universal housing)
12948 Hansen H1100-RN See-Level Assembly (82.5 mm long universal housing) C/W Frost Shield
17200 Phillips 1101 Clear Lens 17311 Phillips 1101-R Bulls-Eye Lens 17310 Phillips 1105L Long Frost Shield (c/w 1106 'O' ring) 17546 Phillips 1103 Gasket 17547 Phillips 1104 Gasket 17052 Phillips 1102 Retainer 18053 AC & R SG1004 1/2" MPT Sight Glass – Clear 17548 AC & R SG1008 1" MPT Sight Glass – Clear 14011 AC & R SG1108 1" MPT Sight Glass – Reflex 17697 AC & R SG1208 1"MPT Sight Glass with Ball 17698 AC & R SG1212 1 1/2"MPT Sight Glass with Ball 17549 AC & R SG1016 2" MPT Sight Glass - Clear 19562 Henry LI48A ½ Double Port Indicator ½” (15mm) FPT 19563 Henry LI48A ¾ Double Port Indicator ¾” (20mm) FPT 19564 Henry LI48A 1 Double Port Indicator 1” (25mm) FPT
POA
OIL DRAIN VALVES 17745 Hansen 50-2644 Apollo Oil Drain Valve 15mm 17437 Hansen 50-2645 Apollo Oil Drain Valve 20mm POA
W115 January 2009
PLEASE QUOTE STOCK NUMBER WHEN ORDERING
THESE PRICES AND SPECIFICATIONS ARE SUBJECT TO ALTERATION WITHOUT NOTICE
Auto Purgers are available on Indent only. For selection and delivery please contact your local branch. Please specify model number, refrigerant and voltage.
HANSEN AUTO PURGERS
HANSEN MINI AUTO PURGER NEAP REALCOLD STOCK NO. MODEL DESCRIPTION PRICE $
excl GST INDENT NEAP Mini Auto Purger – Ammonia INDENT VPM Valve Package Ammonia INDENT NEAPF Mini Auto Purger – Halocarbons INDENT VPMF Valve Package Halocarbons
POA
HANSEN AUTO PURGER APM INDENT APM Auto Purger APM -4-Points Ammonia INDENT VPM Valve Package Ammonia INDENT APMF Auto Purger APM -4-Points Halocarbons INDENT VPMF Valve Package Halocarbons
POA
HANSEN MINI AUTO PURGER NEAP INDENT AP08 Auto Purger Deluxe - 8-Points INDENT AP16 Auto Purger Deluxe - 16-Points INDENT AP24 Auto Purger Deluxe - 24-Points
POA
Various additional options are available including Insulation, Water Conditioning Housing and Relief Valves. For details of the available options and for Halocarbon Refrigerant Auto-Purgers, please contact us.
HANSEN MINI AUTO PURGER NEAP INDENT APP08 Auto Purger Plus - 8-Points INDENT APP16 Auto Purger Plus - 16-Points INDENT APP24 Auto Purger Plus - 24-Points
POA
Suitable for Ammonia Refrigeration Systems only.
W116 January 2009
MINI AUTO PURGER NEAP
AUTO PURGER APM
AUTO PURGER AP
AUTO PURGER APP
PLEASE QUOTE STOCK NUMBER WHEN ORDERING
THESE PRICES AND SPECIFICATIONS ARE SUBJECT TO ALTERATION WITHOUT NOTICE
AMMONIA CHECK VALVES AND INDENT PRODUCTS
HANSEN HCK4 IN-LINE CHECK VALVES - AMMONIA WITH FLANGES WITH MALE ADAPTOR
Dual Plate Check Valve; Mv-1221 ANSI 150 or 300lbs; Body & Disc CF8M; Plate S/S 316. ANSI150lb Valves come with Metal to Metal Seat. The 300lb Valves come with Neoprene seat with chemical resistance to Liquid and Gaseous Ammonia and mineral refrigerant oils at the normal temperatures experienced in industrial refrigeration. For other refrigerants and oil combinations, please refer to your local branch.
W117 January 2009
PLEASE QUOTE STOCK NUMBER WHEN ORDERING
THESE PRICES AND SPECIFICATIONS ARE SUBJECT TO ALTERATION WITHOUT NOTICE
HANSEN 2-STEP SOLENOID AND STOP VALVES (INDENT ONLY)
Notes on Ordering Hermetic Pumps and Accessories• Costs of freight of Accessories are included in the cost of freight of the bare pump. Where
accessories are ordered without pumps, we will calculate freight and other costs of delivery and add to the cost of the accessory.
• Small Pump Packing is chargeable on all base CAM 1 and 2 pumps. • Large Pump Packing is chargeable on all CAM3 and CNF type Pumps. • For Carbon Dioxide Pumps, you need to add the cost of Pressure Testing to 45 Bar. Pumps for
other refrigerants are available on request
PLEASE QUOTE STOCK NUMBER WHEN ORDERING
THESE PRICES AND SPECIFICATIONS ARE SUBJECT TO ALTERATION WITHOUT NOTICE
VALVES – SOLENOID COILS
HANSEN SOLENOID COILS REALCOLD STOCK
NO. MODEL DESCRIPTION PRICE $ excl GST
18061 70-1092 Hansen Solenoid Replacement Coil 115V 18062 70-1093 Hansen Solenoid Replacement Coil 230V 18063 70-1094 Hansen Solenoid Replacement Coil 24v AC 18064 70-1095 Hansen Solenoid Replacement Coil 24v DC 18068 70-0584 Hansen Solenoid Replacement Coil 115V 18069 70-0585 Hansen Solenoid Replacement Coil 230V 18070 70-0586 Hansen Solenoid Replacement Coil 24v AC 18071 70-0583 Hansen Solenoid Replacement Coil 24v DC 18065 70-1100 Hansen Beacon Pilot Light Kit Red 18066 70-1102 Hansen Beacon Pilot Light Kit Green 18067 70-1101 Hansen Beacon Pilot Light Kit Amber
POA
HANSEN DANVALVE SOLENOID ADAPTOR KIT 19534 70-1104 Hansen to Danfoss Coil Conversion Kit (Includes "O" Ring, Circlip and
Fixing Cap) POA
PARKER AMMONIA SOLENOID COILS 19309 205226 Refspec Encapsulated Sol Coil 230V 50HZ 19311 207868 Refspec / Sporlan KSMA32 Sol Coil 230V 50HZ 19418 207608 Sporlan MKC3 Sol Coil 230V 50HZ 17307 205213 Refspec Encapsulated Sol Coil 24VDC
POA
W122 January 2009
Hansen Solenoid Coils
• Hansen coils are Watertight Encapsulated Solenoid coils with no outside frame. All coils are normally sold complete with DIN Plug Socket and come with “O” Ring and Knob. Normal Voltage available is 230V, however, 115V, 24V A/C 24V D/C are also normally available ex-stock.
• Replacement Coils which do not include a Knob and Din Plug are also available in 300mm Tailed and Conduit style
connections on request.
• Beacon Pilot Light Kits, to indicate when solenoids are operating are available on request. This kit includes Beacon Pilot Knob and “O” Ring.
PLEASE QUOTE STOCK NUMBER WHEN ORDERING
THESE PRICES AND SPECIFICATIONS ARE SUBJECT TO ALTERATION WITHOUT NOTICE